• There are no items in your cart

ISO 80000-1:2009

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Quantities and units — Part 1: General
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

12-06-2022

Published date

11-17-2009

ISO 80000-1:2009 gives general information and definitions concerning quantities, systems of quantities, units, quantity and unit symbols, and coherent unit systems, especially the International System of Quantities, ISQ, and the International System of Units, SI.

The principles laid down in ISO 80000-1:2009 are intended for general use within the various fields of science and technology and as an introduction to other parts of the Quantities and units series.

Ordinal quantities and nominal properties are outside the scope of ISO 80000-1:2009.

DevelopmentNote
Supersedes ISO 1000 and ISO 31-0. (11/2009) DRAFT ISO/DIS 80000-1 is also available for this standard. (02/2017)
DocumentType
Standard
Pages
44
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

NF EN ISO 3580 : 2017 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
IEC 63041-2:2017 Piezoelectric sensors - Part 2: Chemical and biochemical sensors
BS ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
06/30148641 DC : DRAFT SEP 2006 IEC 60050-112 ED1 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 112: QUANTITIES AND UNITS
17/30351098 DC : 0 BS EN ISO 24373 - WELDING CONSUMABLES - SOLID WIRES AND RODS FOR FUSION WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION
11/30250538 DC : 0 BS EN ISO 18275 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
UNE-EN 60079-1:2015 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
16/30330977 DC : 0 BS EN 50242 - ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - TEST METHODS FOR MEASURING THE PERFORMANCE
BS EN ISO 27509:2012 Petroleum and natural gas industries. Compact flanged connections with IX seal ring
BS ISO 12641-1:2016 Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration Colour targets for input scanner calibration
12/30265264 DC : DRAFT AUG 2012 BS EN 14700 - WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING
BS ISO 13643-2:2017 Ships and marine technology. Manoeuvring of ships Turning and yaw checking
15/30272880 DC : 0 BS EN ISO 17777 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION
BS ISO 14629 : 2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS
DIN EN ISO 3580:2017-08 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017)
ISO/TS 17536-3:2014 Road vehicles — Aerosol separator performance test for internal combustion engines — Part 3: Method to perform engine gravimetric test
BS EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Requirements for measuring instruments
BS EN ISO 17632:2015 Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification
BS ISO 19973-1:2015 Pneumatic fluid power. Assessment of component reliability by testing General procedures
16/30323859 DC : 0 BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE)
16/30331298 DC : 0 BS ISO 16630 - METALLIC MATERIALS - SHEET AND STRIP - HOLE EXPANDING TEST
IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 3: Frequency aging test methods
ISO 16525-3:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 3: Determination of heat-transfer properties
ISO 17340:2014 Metallic materials Ductility testing High speed compression test for porous and cellular metals
16/30342683 DC : 0 BS EN ISO 80000-2 - QUANTITIES AND UNITS - PART 2: MATHEMATICS
13/30250817 DC : 0 BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS
DIN EN ISO 17769-1:2012-11 LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 1: LIQUID PUMPS (ISO 17769-1:2012)
DIN EN ISO 11357-4 E : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
16/30343189 DC : 0 BS ISO 13643-1 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 1: GENERAL CONCEPTS, QUANTITIES AND TEST CONDITIONS
NF EN ISO 23145-2 : 2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY
ISO/TR 16194:2017 Pneumatic fluid power Assessment of component reliability by accelerated life testing General guidelines and procedures
I.S. EN 61121:2013 TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 61121:2012 (MOD))
DIN ISO 9277:2014-01 DETERMINATION OF THE SPECIFIC SURFACE AREA OF SOLIDS BY GAS ADSORPTION - BET METHOD (ISO 9277:2010)
BS ISO 22201-2:2013 Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications Escalators and moving walks (PESSRAE)
DIN EN 12449:2015-11 (Draft) COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
BS EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
BS EN ISO 12153:2012 Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys. Classification
PREN 764-1 : DRAFT 2013 PRESSURE EQUIPMENT - PART 1: VOCABULARY
12/30257842 DC : 0 BS ISO 27327-2 - FANS - AIR CURTAIN UNITS - PART 2: LABORATORY METHODS OF TESTING FOR SOUND POWER
BS ISO 17411:2014 Optics and photonics. Optical materials and components. Test method for homogeneity of optical glasses by laser interferometry
15/30287681 DC : 0 BS ISO 3581 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION
PD ISO/TS 17518:2015 Medical laboratories. Reagents for staining biological material. Guidance for users
BS ISO 16630:2017 Metallic materials. Sheet and strip. Hole expanding test
ISO 19973-1:2015 Pneumatic fluid power Assessment of component reliability by testing Part 1: General procedures
ISO 17411:2014 Optics and photonics — Optical materials and components — Test method for homogeneity of optical glasses by laser interferometry
DIN ISO 13643-3 E : 2015 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 3: YAW STABILITY AND STEERING (ISO 13643-3:2013)
13/30285580 DC : 0 BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS
BS IEC 62679-1-1:2014 Electronic paper displays Terminology
BS ISO 13175-3:2012 Implants for surgery. Calcium phosphates Hydroxyapatite and beta-tricalcium phosphate bone substitutes
I.S. EN ISO 17777:2016 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION (ISO 17777:2016)
17/30339389 DC : 0 BS ISO 8601-2 - DATA ELEMENTS AND INTERCHANGE FORMATS - INFORMATION INTERCHANGE - REPRESENTATION OF DATES AND TIMES - PART 2: EXTENSIONS
BS ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
16/30325028 DC : 0 BS ISO 29802 - ALL TERRAIN (AT) TYRES AND RIMS - SYMBOL MARKED PNEUMATIC TYRES ON 5 DEGREES TAPERED RIMS - DESIGNATION, DIMENSION, MARKING AND LOAD RATINGS
IEC 60350-2:2017 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
UNI EN 13600 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
11/30251682 DC : 0 BS EN 1977 - COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
CSA C22.2 No. 60079.1 : 2016 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
12/30258880 DC : 0 BS EN 60825-1 ED.3 - SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
12/30267658 DC : 0 BS EN ISO 21809-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION BONDED EPOXY COATINGS
BS EN 60679-1:2017 Piezoelectric, dielectric and electrostatic oscillators of assessed quality Generic specification
BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
12/30262118 DC : 0 BS ISO 14313 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - PIPELINE VALVES
DIN EN ISO 17632:2016-05 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 17632:2015)
BS ISO 17340:2014 Metallic materials. Ductility testing. High speed compression test for porous and cellular metals
BS EN 60384-1:2016 Fixed capacitors for use in electronic equipment Generic specification
DIN EN ISO 80000-9:2013-08 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011)
ISO 13643-4:2017 Ships and marine technology — Manoeuvring of ships — Part 4: Stopping, acceleration, traversing
IEC TR 62354:2014 General testing procedures for medical electrical equipment
API 5L RUSSIAN : 2012 SPECIFICATION FOR LINE PIPE
CSA NGV1 : 2017 COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES
UNI EN 13601 : 2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
UNI EN 13605 : 2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
EN 60350-2:2018 Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance
BS EN ISO 3581:2012 Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat-resisting steels. Classification
I.S. EN ISO 14171:2016 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 14171:2016)
BS EN ISO 24598:2012 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels. Classification
IEC 60079-1 REDLINE : 7ED 2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
API 5L CHINESE : 2012 SPECIFICATION FOR LINE PIPE
ISO 13179-1:2014 Implants for surgery Plasma-sprayed unalloyed titanium coatings on metallic surgical implants Part 1: General requirements
BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
AWS A5.34/A5.34M : 2013 SPECIFICATION FOR NICKEL-ALLOY ELECTRODES FOR FLUX CORED ARC WELDING
AWS A5.21/A5.21M:2011 SPECIFICATION FOR BARE ELECTRODES AND RODS FOR SURFACING
I.S. EN ISO 3580:2017 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017)
AWS A5.23/A5.23M : 2011 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING
AWS A5.13/A5.13M : 2010 SPECIFICATION FOR SURFACING ELECTRODES FOR SHIELDED METAL ARC WELDING
I.S. EN ISO 10628-1:2015 DIAGRAMS FOR THE CHEMICAL AND PETROCHEMICAL INDUSTRY - PART 1: SPECIFICATION OF DIAGRAMS (ISO 10628-1:2014)
I.S. EN 60456:2016 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
I.S. EN ISO 13349:2010 FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES
AWS A5.9/A5.9M : 2012 SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS
ISO 14188:2012 Metallic and other inorganic coatings — Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
I.S. EN ISO 21809-5:2017 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS (ISO 21809-5:2017)
I.S. EN IEC 63041-1:2018 PIEZOELECTRIC SENSORS - PART 1: GENERIC SPECIFICATIONS
I.S. EN ISO 3690:2012 WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012)
I.S. EN ISO 14174:2012 WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION (ISO 14174:2012)
I.S. EN 16245-1:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS
EN IEC 63041-1:2018 Piezoelectric sensors - Part 1: Generic specifications
BS EN ISO 17672:2016 Brazing. Filler metals
ISO/TS 11602-1:2010 Fire protection Portable and wheeled fire extinguishers Part 1: Selection and installation
I.S. EN 62595-1-1:2013 LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION (IEC 62595-1-1:2013 (EQV))
I.S. EN 61591:1998 HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE
UNE-EN ISO 21952:2013 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
PREN 1977 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
ISO 4000-1:2015 Passenger car tyres and rims Part 1: Tyres (metric series)
CSA LNG 2-2017 LIQUEFIED NATURAL GAS VEHICLE FUEL CONTAINERS
BS ISO 2597-2:2015 Iron ores. Determination of total iron content Titrimetric methods after titanium(III) chloride reduction
IEC 62391-1:2015 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
BS ISO 10204:2017 Iron ores. Determination of magnesium. Flame atomic absorption spectrometric method
I.S. EN 62575-1:2016 RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
ISO 5393:2017 Rotary tools for threaded fasteners — Performance test method
I.S. EN 61987-24-2:2017 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-2: LIST OF PROPERTIES (LOPS) OF VALVE/ACTUATOR ACCESSORIES FOR ELECTRONIC DATA EXCHANGE
ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 2: Removal of acetaldehyde
BS EN ISO 3690:2012 Welding and allied processes. Determination of hydrogen content in arc weld metal
DIN EN ISO 3690:2012-07 WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012)
PD ISO/TS 13499:2014 Road vehicles. Multimedia data exchange format for impact tests
UNI EN ISO 18275 : 2012 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION
ISO 50002:2014 Energy audits Requirements with guidance for use
BS EN ISO 14174:2012 Welding consumables. Fluxes for submerged arc welding and electroslag welding. Classification
EN ISO 3183:2012/A1:2018 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
UNI EN ISO 14174 : 2012 WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION
UNE-EN ISO 21809-5:2018 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
ISO 16220:2017 Magnesium and magnesium alloys — Magnesium alloy ingots and castings
UNE-EN ISO 19288:2016 Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016)
BS ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of toluene
UNI EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS
ISO 18071:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment Test method using bacteriophage Q-beta
ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 3: Removal of toluene
IEC PAS 63125:2017 Clothes washing machines for commercial use - Methods for measuring the performance
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
EN 12165:2016 COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
DIN EN 13605:2013-09 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
DIN EN 13599:2014-12 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
DIN EN ISO 717-1:2013-06 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013)
DIN EN ISO 6848:2015-12 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015); German version EN ISO 6848:2015
DIN EN ISO 9906 E : 2013 ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012)
DIN EN 1982:2016-01 (Draft) COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 13602:2013-09 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
DIN EN 13604:2013-09 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
BS EN 13600:2013 Copper and copper alloys. Seamless copper tubes for electrical purposes
BS EN ISO 2560:2009 Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
BS EN 14700:2014 Welding consumables. Welding consumables for hard-facing
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
UNE-EN ISO 2560:2010 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
IEC 60079-35-2:2011 Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
BS EN ISO 13686:2013 Natural gas. Quality designation
BS EN 60825-1:2014 Safety of laser products Equipment classification and requirements
BS EN 1976:2012 Copper and copper alloys. Cast unwrought copper products
UNE-EN 1976:2013 Copper and copper alloys - Cast unwrought copper products
BS EN ISO 11960:2014 Petroleum and natural gas industries. Steel pipes for use as casing or tubing for wells
UNE-EN ISO 6976:2017 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
UNE-EN ISO 17777:2016 Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016)
ISO 21952:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification
BS EN ISO 6976:2005 Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
BS ISO 12829:2016 Hydraulic spin-on filters with finite lives. Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
BS EN 12420:2014 Copper and copper alloys. Forgings
UNE-EN 764-2:2012 Pressure equipment - Part 2: Quantities, symbols and units
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
I.S. EN 13601:2013 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
UNI EN ISO 24034 : 2011 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION
I.S. EN 14700:2014 WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING
I.S. EN ISO 13686:2013 NATURAL GAS - QUALITY DESIGNATION (ISO 13686:2013)
I.S. EN 13148:2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
I.S. EN 14870-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
DIN EN ISO 636:2017-09 WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE-GRAIN STEELS - CLASSIFICATION (ISO 636:2017)
IEC 60384-1:2016 RLV Fixed capacitors for use in electronic equipment - Part 1: Generic specification
EN 12166:2016 Copper and copper alloys - Wire for general purposes
DIN EN ISO 14174:2012-05 WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION (ISO 14174:2012)
EN ISO 16834:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
EN 12438:2017 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
EN 12421:2017 Magnesium and magnesium alloys - Unalloyed magnesium
EN ISO 14343:2017 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
DIN EN ISO 14343:2017-08 WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017)
EN 60793-1-1:2017 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
DIN EN ISO 18276:2017-07 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 18276:2017)
EN ISO 21952:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
EN ISO 17672:2016 Brazing - Filler metals (ISO 17672:2016)
DIN EN ISO 3580:2011-05 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 3580:2017)
EN ISO 17634:2015 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
EN ISO 1628-1:2009/A1:2012 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009/AMD 1:2012)
EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
EN 12451:2012 Copper and copper alloys - Seamless, round tubes for heat exchangers
EN 50242:2016 Electric dishwashers for household use - Methods for measuring the performance
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013)
ONORM EN 14700 : 2014 WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING
CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
DIN EN ISO 12153:2012-07 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2011)
PREN 13605 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
EN 13600:2013 Copper and copper alloys - Seamless copper tubes for electrical purposes
ES 202 642 : 1.1.1 HUMAN FACTORS (HF); PERSONALIZATION OF EHEALTH SYSTEMS BY USING EHEALTH USER PROFILES (EHEALTH)
CEI UNI EN 80000-14 : 2009 QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY
15/30314904 DC : 0 BS EN ISO 18276 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION
PREN 13601 : DRAFT 2011 COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
12/30243456 DC : DRAFT MAR 2012 BS ISO 16249 - SPRINGS - SYMBOLS
DIN EN ISO 6892-2:2011-05 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
UNE-EN ISO 14343:2017 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2017)
I.S. EN ISO 13123:2011 METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT (ISO 13123:2011)
BS EN 60939-3:2015 Passive filter units for electromagnetic interference suppression Passive filter units for which safety tests are appropriate
10/30214897 DC : 0 BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES
BS ISO 8287:2011 Magnesium and magnesium alloys. Unalloyed magnesium. Chemical composition
UNE-EN ISO 16061:2015 Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015)
BS EN 60350-1:2016 Household electric cooking appliances Ranges, ovens, steam ovens and grills — Methods for measuring performance (IEC 60350-1:2016, modified)
15/30300738 DC : DRAFT MAY 2015 BS EN 60027-2 ED 4.0 - LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY - PART 2: TELECOMMUNICATIONS AND ELECTRONICS
BS ISO 18535:2016 Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
13/30254358 DC : 0 BS ISO 50002 - ENERGY AUDITS
14/30287696 DC : 0 BS EN ISO 17634 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
DIN ISO 13643-2:2015-10 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 2: TURNING AND YAW CHECKING (ISO 13643-2:2013)
10/30233138 DC : 0 BS EN ISO 21952 - WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS-SHIELDED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
AOP 20 : 2017 SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS
13/30257993 DC : 0 BS EN ISO 6892-3 - METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE
PD ISO/IEC GUIDE 37:2012 Instructions for use of products by consumers
15/30284685 DC : 0 BS ISO 18762 - TUBES OF TITANIUM AND TITANIUM ALLOYS - WELDED TUBES FOR CONDENSERS AND HEAT EXCHANGERS - TECHNICAL DELIVERLY CONDITIONS
PD ISO/TR 13014:2012 Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
11/30243718 DC : 0 BS EN 61121 ED 4.0 - TUMBLE DRYERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
16/30338749 DC : 0 BS EN ISO 21809-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 5: EXTERNAL CONCRETE COATINGS
16/30346829 DC : 0 BS ISO 16038 - MALE CONDOMS - GUIDANCE ON THE USE OF ISO 4074 AND ISO 23409 IN THE QUALITY MANAGEMENT CONDOMS
17/30293100 DC : 0 BS ISO 19882 - GASEOUS HYDROGEN - THERMALLY ACTIVATED PRESSURE RELIEF DEVICES FOR COMPRESSED HYDROGEN VEHICLE FUEL CONTAINERS
UNI EN ISO 19001 : 2013 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY
16/30334068 DC : 0 BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS
BS EN 50242:2016 Electric dishwashers for household use. Methods for measuring the performance
BS ISO 80000-9 : 2009 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS
11/30199648 DC : DRAFT MAY 2011 BS ISO 13125 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIFUNGAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS
UNI CEI ISO 80000-2 : 2010 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY
ONORM EN ISO 11357-4 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
17/30314224 DC : 0 BS ISO 12103-3 - ROAD VEHICLES - TEST CONTAMINANTS FOR FILTER EVALUATION - PART 3: SOOT AEROSOL
BS ISO 19973-2:2015 Pneumatic fluid power. Assessment of component reliability by testing Directional control valves
16/30337558 DC : 0 BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION
BS ISO 29802:2017 All-terrain (AT) tyres and rims. Symbol marked pneumatic tyres on 5° tapered rims. Designation, dimension, marking and load ratings
11/30217708 DC : 0 BS ISO 14628 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ROLLING CONTACT FATIGUE OF SILICON NITRIDE CERAMICS AT ROOM TEMPERATURE BY BALLS-ON-FLAT METHOD
BS EN ISO 25239-4:2011 Friction stir welding. Aluminium Specification and qualification of welding procedures
BS ISO 27327-2:2014 Fans. Air curtain units Laboratory methods of testing for sound power
I.S. EN 60705:2015 HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE
BS EN 4500-001:2012 Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules
BS EN 62714-1:2014 Engineering data exchange format for use in industrial automation systems engineering Architecture and General Requirements
16/30297082 DC : 0 BS EN ISO 80000-5 - QUANTITIES AND UNITS - PART 5: THERMODYNAMICS
I.S. EN 61400-25-2:2015 WIND TURBINES - PART 25-2: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - INFORMATION MODELS
17/30309582 DC : 0 BS EN 60350-2 ED 2.0 - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE
CEI UNI ISO 80000-7 : 2009 QUANTITIES AND UNITS - PART 7: LIGHT
PREN 12438 : DRAFT 2015 MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
EN 60939-3:2015/AC:2016-04 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE (IEC 60939-3:2015/COR1:2016)
I.S. EN 50229:2015 ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE
PD ISO/TR 16194:2017 Pneumatic fluid power. Assessment of component reliability by accelerated life testing. General guidelines and procedures
UNI EN ISO 13123 : 2012 METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT
PD ISO/TS 17536-2:2017 Road vehicles. Aerosol separator performance test for internal combustion engines Laboratory test method
12/30261889 DC : 0 BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS
UNE-EN 60793-1-1:2017 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
IEC 62391-1:2015 RLV Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
DIN EN 16481:2014-09 TIMBER STAIRS - STRUCTURAL DESIGN
CAN/CSA-ISO/IEC 11179-1:16 Information technology - Metadata registries (MDR) - Part 1: Framework (Adopted ISO/IEC 11179-1:2015, third edition, 2015-12-15)
13/30274227 DC : 0 BS EN 764-1 - PRESSURE EQUIPMENT - PART 1: VOCABULARY
BS EN 61400-25-2:2015 Wind turbines Communications for monitoring and control of wind power plants - Information models
BS ISO 13179-1:2014 Implants for surgery. Plasma-sprayed unalloyed titanium coatings on metallic surgical implants General requirements
PREN 50242 : DRAFT 2015 ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - TEST METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A2:2012, MODIFIED + A1:2009, MODIFIED)
11/30193150 DC : 0 BS EN 60601-1:2006 AMD.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS ISO 18762:2016 Tubes of titanium and titanium alloys. Welded tubes for condensers and heat exchangers. Technical delivery conditions
BS ISO 14817-1:2015 Intelligent transport systems. ITS central data dictionaries Requirements for ITS data definitions
BS EN 61987-24-3:2017 Industrial-process measurement and control. Data structures and elements in process equipment catalogues Lists of properties (LOPs) of flow modification accessories for electronic data exchange
BS EN ISO 21809-5:2017 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems External concrete coatings
17/30313373 DC : 0 BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION
10/30233135 DC : 0 BS EN ISO 24598 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
UNI EN 4500-001 : 2014 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
BS EN ISO 6892-3:2015 Metallic materials. Tensile testing Method of test at low temperature
11/30196213 DC : 0 BS ISO 12817 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF OPENHOLE COMPRESSION STRENGTH
PD CLC/TS 50594:2015 Tumble dryers for commercial use. Methods for measuring the performance
BS ISO 404:2013 Steel and steel products. General technical delivery requirements
BS EN 60079-35-2:2012 Explosive atmospheres Caplights for use in mines susceptible to firedamp. Performance and other safety-related matters
PREN 13600 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
17/30346428 DC : 0 BS ISO/IEC 19086-2 - INFORMATION TECHNOLOGY - CLOUD COMPUTING - SERVICE LEVEL AGREEMENT (SLA) FRAMEWORK - PART 2: METRIC MODEL
11/30239433 DC : 0 BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
CSA ISO 14341 : 2011 WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
BS ISO 20378 : 2017 WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON-ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION
I.S. EN ISO 3183:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
ISO 17536-1:2015 Road vehicles — Aerosol separator performance test for internal combustion engines — Part 1: General
PREN 13107 : DRAFT 2013 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
UNI EN ISO 1628-1 : 2012 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES
I.S. EN ISO 14604:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF FRACTURE STRAIN (ISO 14604:2012)
ISO 24598:2012 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels Classification
CAN/CSA-Z614:2014(R2019) CHILDREN'S PLAYSPACES AND EQUIPMENT
I.S. EN ISO 28781:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
DIN EN ISO 16061:2015-09 Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015)
CSA ISO 14341 : 2011 : R2016 WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
UNE-EN ISO 16834:2012 Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels - Classification (ISO 16834:2012)
I.S. EN ISO 544:2017 WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS (ISO 544:2017)
CEI EN 61786-1 : 2014 MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
ANSI HGV 2 : 2014 COMPRESSED HYDROGEN GAS VEHICLE FUEL CONTAINERS
UNI EN 16245-1 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS
AWS A5.35/A5.35M : 2015 SPECIFICATION FOR COVERED ELECTRODES FOR UNDERWATER WET SHIELDED METAL ARC WELDING
AWS A5.8/A5.8M : 2013 SPECIFICATION FOR FILLER METALS FOR BRAZING AND BRAZE WELDING
AWS A5.22/A5.22M : 2012 SPECIFICATION FOR STAINLESS STEEL FLUX CORED AND METAL CORED WELDING ELECTRODES AND RODS
UNE-EN 60079-35-2:2013 Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
AWS A5.32/A5.32M : 2011 WELDING CONSUMABLES - GASES AND GAS MIXTURES FOR FUSION WELDING AND ALLIED PROCESSES
BS EN 60115-1 : 2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 3690:2012 Welding and allied processes Determination of hydrogen content in arc weld metal
BS ISO/IEC 11179-1:2015 Information technology. Metadata registries (MDR) Framework
EN 62884-2:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 2: Phase jitter measurement method
UNI CEI ISO 80000-9 : 2010 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS
BS EN ISO 80000-2:2013 Quantities and units Mathematical signs and symbols to be used in the natural sciences and technology
EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 60115-8:2012 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS (IEC 60115-8:2009 (MOD))
I.S. EN 12449:2016 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
CEI EN 60679-1 : 2009 PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
BS ISO 5011 : 2014 INLET AIR CLEANING EQUIPMENT FOR INTERNAL COMBUSTION ENGINES AND COMPRESSORS - PERFORMANCE TESTING
ISO 18405:2017 Underwater acoustics — Terminology
ISO 7503-3:2016 Measurement of radioactivity Measurement and evaluation of surface contamination Part 3: Apparatus calibration
UNI EN ISO 6892-2 : 2011 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
ISO 19867-1:2018 Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
ISO 22745-11:2010 Industrial automation systems and integration Open technical dictionaries and their application to master data Part 11: Guidelines for the formulation of terminology
DIN EN 12421:2015-12 (Draft) MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
DIN EN ISO 17633:2016-02 (Draft) WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION
BS EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
BS EN 12449:2016 Copper and copper alloys. Seamless, round tubes for general purposes
NF EN ISO 544 : 2017 WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS
NF ISO 80000-2 : 2010 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY
17/30356400 DC : 0 BS EN 17116-4 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 4: WASHER-EXTRACTORS
UNI EN ISO 24598 : 2012 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
ISO 18275:2011 Welding consumables Covered electrodes for manual metal arc welding of high-strength steels Classification
I.S. EN 61987-24-3:2017 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES - PART 24-3: LISTS OF PROPERTIES (LOPS) OF FLOW MODIFICATION ACCESSORIES FOR ELECTRONIC DATA EXCHANGE
IEC 60539-1:2016 Directly heated negative temperature coefficient thermistors - Part 1: Generic specification
ANSI NGV3.1 : 2014 FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES
ISO 16525-2:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 2: Determination of electrical characteristics for use in electronic assemblies
IEC 60384-1 REDLINE : 5ED 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
BS EN ISO 544:2017 Welding consumables. Technical delivery conditions for filler materials and fluxes. Type of product, dimensions, tolerances and markings
UNE-EN 50229:2016 Electric clothes washer-dryers for household use - Methods of measuring the performance
BS EN ISO 80000-10:2013 Quantities and units Atomic and nuclear physics
W48-18 Filler metals and allied materials for metal arc welding
UNI EN ISO 17769-1 : 2012 LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 1: LIQUID PUMPS
I.S. EN ISO 27509:2012 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012)
ISO 29802:2017 All-terrain (AT) tyres and rims — Symbol marked pneumatic tyres on 5 degree tapered rims — Designation, dimension, marking and load ratings
ISO/IEC 11179-1:2015 Information technology — Metadata registries (MDR) — Part 1: Framework
ONORM EN ISO 3690 : 2012 WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL (ISO 3690:2012)
EN ISO 17633:2018 Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017)
ISO 15633:2017 Iron ores — Determination of nickel — Flame atomic absorption spectrometric method
EN 12164:2016 Copper and copper alloys - Rod for free machining purposes
ANSI/AAMI/IEC TIR62354:2015 GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT
EN 61591:1997/A12:2015 HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE (IEC 61591:1997)
EN 764-2:2012 Pressure equipment - Part 2: Quantities, symbols and units
EN 60705:2015 Household microwave ovens - Methods for measuring performance
IEC 61121:2012 Tumble dryers for household use - Methods for measuring the performance
AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
IEC 61987-24-2:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 1982:2017 Copper and copper alloys - Ingots and castings
EN 12168:2016 Copper and copper alloys - Hollow rod for free machining purposes
NF EN ISO 24034 : 2010 WELDING CONSUMABLES - SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION
DIN EN 12438:2015-12 (Draft) MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
DIN EN ISO 717-2:2013-06 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
DIN EN 1520:2011-06 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
DIN EN ISO 16834:2012-08 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 16834:2012)
DIN EN 13107:2015-09 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
DIN EN ISO 1071:2016-05 WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION (ISO 1071:2015)
DIN EN 1559-1:2011-05 Founding - Technical conditions of delivery - Part 1: General
DIN EN 12167:2015-12 (Draft) COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
DIN EN 14700:2014-07 Welding consumables - Welding consumables for hard-facing
DIN EN 12168:2015-12 (Draft) COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
DIN EN 12165:2015-12 (Draft) COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
DIN EN 12164:2015-12 (Draft) COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
DIN EN 12163:2015-12 (Draft) COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
IEC 60793-1-1:2017 Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
BS EN 12450:2012 Copper and copper alloys. Seamless, round copper capillary tubes
UNE-EN ISO 13686:2014 Natural gas - Quality designation (ISO 13686:2013)
UNE-EN 50242:2016 Electric dishwashers for household use - Methods for measuring the performance
BS EN ISO 14343:2017 Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification
ISO 23145-2:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density
BS EN 12163:2011 Copper and copper alloys. Rod for general purposes
UNE-EN 1977:2013 Copper and copper alloys - Copper drawing stock (wire rod)
ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
CSA HPIT 1 : 2015 COMPRESSED HYDROGEN POWERED INDUSTRIAL TRUCK ON-BOARD FUEL STORAGE AND HANDLING COMPONENTS
ISO 11960:2014 Petroleum and natural gas industries Steel pipes for use as casing or tubing for wells
CSA HPIT 1:15 (R2020) Compressed hydrogen powered industrial truck on-board fuel storage and handling components
ISO 6848:2015 Arc welding and cutting Nonconsumable tungsten electrodes Classification
BS EN 1172:2011 Copper and copper alloys. Sheet and strip for building purposes
ISO 717-2:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
IEC 60440:2012 Method of measurement of non-linearity in resistors
BS EN ISO 6848:2015 Arc welding and cutting. Nonconsumable tungsten electrodes. Classification
ISO 19859:2016 Gas turbine applications Requirements for power generation
ISO 24034:2010 Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys Classification
UNE-EN ISO 1071:2016 Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)
BS EN 13148:2010 Copper and copper alloys. Hot-dip tinned strip
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
UNE-EN ISO 6848:2015 Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015)
EN ISO 2560:2009 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
I.S. EN 12450:2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
I.S. EN 13600:2013 COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
I.S. EN ISO 21952:2012 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS-SHIELDED ARC WELDING OF CREEP-RESISTING STEEL - CLASSIFICATION (ISO 21952:2012)
I.S. EN ISO 18273:2015 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015)
I.S. EN 12166:2016 COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES
DIN EN 13148:2010-12 Copper and copper alloys - Hot-dip tinned strip
ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
DIN EN 12450:2013-01 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
I.S. EN 1982:2017 COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
DIN EN 12451:2012-08 Copper and copper alloys - Seamless, round tubes for heat exchangers
IEC 60350-1:2016 RLV Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
I.S. EN 12421:2017 MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
DIN EN 1172:2012-02 Copper and copper alloys - Sheet and strip for building purposes
EN ISO 27509:2012/AC:2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING (ISO 27509:2012/COR 1:2013)
I.S. EN 1520:2011 PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT
I.S. EN 13599:2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
I.S. EN 12167:2016 COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES
DIN EN 12420:1999-03 COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN 13605:2013 COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
I.S. EN ISO 18274:2010 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID STRIP ELECTRODES, SOLID WIRES AND SOLID RODS FOR FUSION WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION
I.S. EN 1977:2013 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
I.S. EN 12452:2012 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
I.S. EN ISO 6976:2016 NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016)
I.S. EN 12438:2017 MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
DIN EN 12452:2012-08 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
I.S. EN 1172:2011 COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES
I.S. EN 12168:2016 COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES
I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
I.S. EN ISO 17634:2015 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 17634:2015)
I.S. EN ISO 1071:2015 WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION (ISO 1071:2015)
I.S. EN 1559-1:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 1976:2012 COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS
I.S. EN ISO 14172:2015 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION (ISO 14172:2015)
I.S. EN 13602:2013 COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
I.S. EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
I.S. EN 13107:2015 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
I.S. EN 13604:2013 COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
I.S. EN ISO 6848:2015 ARC WELDING AND CUTTING - NONCONSUMABLE TUNGSTEN ELECTRODES - CLASSIFICATION (ISO 6848:2015)
EN 50229 : 2015 COR 2016 ELECTRIC CLOTHES WASHER-DRYERS FOR HOUSEHOLD USE - METHODS OF MEASURING THE PERFORMANCE
I.S. EN ISO 9906:2012 ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012)
UNI EN ISO 717-1 : 2013 ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION
I.S. EN 12451:2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
EN 60825-1:2014/AC:2017-06 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014)
I.S. EN ISO 717-1:2013 ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 1: AIRBORNE SOUND INSULATION (ISO 717-1:2013)
I.S. EN ISO 21809-2:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS (ISO 21809-2:2014)
ONORM EN ISO 2560 : 2010 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
UNI EN ISO 2560 : 2010 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
DIN EN 1977:2013-04 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
EN ISO 11357-4:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
I.S. EN 12165:2016 COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK
I.S. EN 12164:2016 COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES
EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
I.S. EN 12420:2014 COPPER AND COPPER ALLOYS - FORGINGS
I.S. EN ISO 717-2:2013 ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION (ISO 717-2:2013)
UNI EN ISO 717-2 : 2013 ACOUSTICS - RATING OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 2: IMPACT SOUND INSULATION
I.S. EN 764-2:2012 PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS
I.S. EN ISO 14343:2017 WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017)
I.S. EN 12163:2016 COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES
I.S. EN ISO 16834:2012 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 16834:2012)
DIN EN 764-2:2012-04 Pressure equipment - Part 2: Quantities, symbols and units
UNI EN 14870-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
ASME PV CODE 2C : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS
VDI/VDE 2649:2011-01 Rotary tools for bolted connection - Guideline for comparative power-measurements of hydraulic impulse tools
VDI/VDE 2647:2013-02 Type test of nutrunning tools - Torque and torque/angle checking
VDI/VDE 3699 Blatt 4:2014-01 Process control using display screens - Curves
OVE/ONORM EN 60350-2 : 2015 HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE (IEC 60350-2:2011, MODIFIED)
UNE-EN ISO 13349:2011 Fans - Vocabulary and definitions of categories (ISO 13349:2010)
ISO 19722:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
DIN EN ISO 636 E : 2017 WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE-GRAIN STEELS - CLASSIFICATION (ISO 636:2017)
ANSI NGV1 : 2017 COMPRESSED NATURAL GAS VEHICLE (NGV) FUELING CONNECTION DEVICES
ECA ILAC P14 : 2013 ILAC POLICY FOR UNCERTAINTY IN CALIBRATION
ISO 1100-2:2010 Hydrometry Measurement of liquid flow in open channels Part 2: Determination of the stage-discharge relationship
13/30246099 DC : 0 BS ISO 17094 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR ANTIBACTERIAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT
17/30337173 DC : 0 BS EN 62884-4 - MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 4: SHORT-TERM FREQUENCY STABILITY TEST METHODS
ISO/IEC Guide 37:2012 Instructions for use of products by consumers
BS EN 62595-1-1:2013 LCD backlight unit Generic specification
CLC/TS 50594:2015 Tumble dryers for commercial use - Methods for measuring the performance
PREN 60436 : DRAFT 2015 ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - TEST METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A2:2012, MODIFIED + A1:2009, MODIFIED)
DIN EN ISO 80000-2 E : 2013 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY (ISO 80000-2:2009)
13/30287806 DC : 0 BS EN 60539-1 - DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
BS ISO 13643-3:2017 Ships and marine technology. Manoeuvring of ships Yaw stability and steering
BS EN ISO 19001:2013 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
16/30350802 DC : 0 BS EN ISO 18275 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION
PD IEC/TS 62720:2017 Identification of units of measurement for computer-based processing
DIN EN ISO 10628-1 E : 2015 DIAGRAMS FOR THE CHEMICAL AND PETROCHEMICAL INDUSTRY - PART 1: SPECIFICATION OF DIAGRAMS (ISO 10628-1:2014)
ISO 404:2013 Steel and steel products — General technical delivery requirements
13/30285624 DC : 0 BS EN ISO 16061 - INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS
BS EN 61987-24-2:2017 Industrial-process measurement and control. Data structures and elements in process equipment catalogues List of properties (LOPs) of valve/actuator accessories for electronic data exchange
PD CLC/TS 50640:2015 Clothes washing machines for commercial use. Methods for measuring the performance
ISO 18471:2015 Agricultural irrigation equipment Filters Verification of filtration grade
17/30318200 DC : 0 BS ISO 28580 - TYRE ROLLING RESISTANCE MEASUREMENT METHOD - SINGLE POINT TEST AND MEASUREMENT RESULT CORRELATION - DESIGNED TO FACILITATE INTERNATIONAL COOPERATION AND, POSSIBLY, REGULATION BUILDING
BS EN ISO 18275:2012 Welding consumables. Covered electrodes for manual metal arc welding of high-strength steels. Classification
13/30280243 DC : 0 BS ISO 5393 - ROTARY TOOLS FOR THREADED FASTENERS - PERFORMANCE TEST METHOD
17/30335356 DC : DRAFT MAY 2017 BS ISO 28641 - RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS
14/30301974 DC : 0 BS ISO 10203 - IRON ORES - DETERMINATION OF CALCIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
17/30351439 DC : 0 BS EN ISO 26304 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
13/30294749 DC : 0 BS ISO 19973-2 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 2: DIRECTIONAL CONTROL VALVES
BS EN ISO 17777:2016 Welding consumables. Covered electrodes for manual metal arc welding of copper and copper alloys. Classification
BS EN ISO 14629:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of flowability of ceramic powders
I.S. EN ISO 17769-1:2012 LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 1: LIQUID PUMPS (ISO 17769-1:2012)
UNI EN ISO 12153 : 2012 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION
DIN ISO 18352:2017-11 CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009)
14/30287690 DC : 0 BS EN ISO 18273 - WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION
17/30356406 DC : 0 BS EN 17116-2 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS
UNE-EN 61121:2013 Tumble dryers for household use - Methods for measuring the performance
BS ISO 19973-3:2015 Pneumatic fluid power. Assessment of component reliability by testing Cylinders with piston rod
ISO 18061:2014 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) Determination of antiviral activity of semiconducting photocatalytic materials Test method using bacteriophage Q-beta
11/30219230 DC : 0 BS ISO 13175-3 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATES - PART 3: HYDROXYAPATITE AND BETA-TRICALCIUM PHOSPHATE BONE SUBSTITUTES
BS EN ISO 3580:2017 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification
BS ISO 22197-4:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of formaldehyde
11/30240450 DC : 0 BS EN 13347 - COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING
13/30287675 DC : 0 BS EN ISO 636 - WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE-GRAIN STEELS - CLASSIFICATION
PREN 12421 : DRAFT 2015 MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
BS ISO 18071:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of antiviral activity of semiconducting photocatalytic materials under indoor lighting environment. Test method using bacteriophage Q-beta
ISO/TS 17518:2015 Medical laboratories — Reagents for staining biological material — Guidance for users
BS EN ISO 6892-1:2016 Metallic materials. Tensile testing Method of test at room temperature
UNI EN ISO 13349 : 2011 FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES
11/30216339 DC : 0 BS ISO 8287 - MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM - CHEMICAL COMPOSITION
BS ISO 23145-2 : 2012 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY
13/30275585 DC : 0 BS EN 13107 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
13/30294746 DC : 0 BS ISO 19973-1 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 1: GENERAL PROCEDURES
17/30355897 DC : 0 BS EN 60350-2:2017/AA - HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE
ISO/IEC 14776-454:2018 Information technology Small computer system interface (SCSI) Part 454: SCSI Primary Commands - 4 (SPC-4)
ISO 22201-2:2013 Lifts (elevators), escalators and moving walks Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE)
CEI EN 60440 : 2013 METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS
14/30287684 DC : 0 BS EN ISO 6848 - ARC WELDING AND CUTTING - NONCONSUMABLE TUNGSTEN ELECTRODES - CLASSIFICATION
UNI EN ISO 25239-4 : 2012 FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES
ISO 14174:2012 Welding consumables — Fluxes for submerged arc welding and electroslag welding — Classification
BS ISO 18061:2014 Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Q-beta
BS ISO 13643-4:2017 Ships and marine technology. Manoeuvring of ships Stopping, acceleration, traversing
IEC TS 62950:2017 Household and similar electrical appliances - Specifying smart capabilities of appliances and devices - General aspects
BS ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for conductivity measurement of ion-conductive fine ceramics Oxide-ion-conducting solid electrolytes
ISO 17633:2017 Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification
DIN EN 16481 E : 2014 TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC) Determination of specific heat capacity
EN 61987-24-3:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
ISO 3898:2013 Bases for design of structures — Names and symbols of physical quantities and generic quantities
BS ISO 16249:2013 Springs. Symbols
UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
17/30347911 DC : 0 BS ISO 11929-3 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 3: APPLICATIONS TO UNFOLDING METHODS
API 6DSS : 2017-08 SPECIFICATION FOR SUBSEA PIPELINE VALVES
BS ISO 16525-2:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of electrical characteristics for use in electronic assemblies
BS ISO 19973-4:2014 Pneumatic fluid power. Assessment of component reliability by testing Pressure regulators
15/30271100 DC : 0 BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY
DIN EN ISO 10628-1:2015-04 DIAGRAMS FOR THE CHEMICAL AND PETROCHEMICAL INDUSTRY - PART 1: SPECIFICATION OF DIAGRAMS (ISO 10628-1:2014)
17/30356073 DC : 0 BS ISO 19101-2 - GEOGRAPHIC INFORMATION - REFERENCE MODEL - PART 2: IMAGERY
CSA ISO 50002 : 2015 ENERGY AUDITS - REQUIREMENTS WITH GUIDANCE FOR USE
ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption — BET method
INCITS/ISO/IEC 11179-3 : 2014 INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 3: REGISTRY METAMODEL AND BASIC ATTRIBUTES
15/30279085 DC : 0 BS ISO 18531 - IMPLANTS FOR SURGERY - CALCIUM PHOSPHATE BIOCERAMICS - CHARACTERIZATION OF HARDENING BONE PASTE MATERIALS
UNE-EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
BS ISO 4000-1:2015 Passenger car tyres and rims Tyres (metric series)
PREN 12451 : DRAFT 2010 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
13/30287687 DC : 0 BS EN ISO 14172 - WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION
ANSI INCITS 501 : 2016 INFORMATION TECHNOLOGY - SECURITY FEATURES FOR SCSI COMMANDS (SFSC)
BS EN 60793-1-1:2017 Optical fibres Measurement methods and test procedures. General and guidance
CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
UNE-EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
11/30240456 DC : 0 BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES
ISO 16842:2014 Metallic materials Sheet and strip Biaxial tensile testing method using a cruciform test piece
BS EN 62884-2:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Phase jitter measurement method
BS EN ISO 80000-9 : 2013 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS
ISO 6892-2:2018 Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
I.S. EN ISO 80000-2:2013 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY (ISO 80000-2:2009)
BS EN ISO 6892-2:2011 Metallic materials. Tensile testing Method of test at elevated temperature
I.S. EN ISO 19001:2013 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013)
NF EN ISO 27509 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING
IEC PAS 63124:2017 Tumble dryers for commercial use - Methods for measuring the performance
CSA B108 : 2014 COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE
I.S. EN 60679-1:2017 PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN ISO 80000-5:2013 QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000- 5:2007)
I.S. EN 140401-804:2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
DIN EN ISO 14171:2015-08 (Draft) WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 14171:2016)
I.S. EN 60939-3:2015 PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 3: PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE
ISO/IEC 11179-3:2013 Information technology — Metadata registries (MDR) — Part 3: Registry metamodel and basic attributes
I.S. EN IEC 63041-2:2018 PIEZOELECTRIC SENSORS - PART 2: CHEMICAL AND BIOCHEMICAL SENSORS
NF EN ISO 13123 : 2012 METALLIC AND OTHER INORGANIC COATINGS - TEST METHOD OF CYCLIC HEATING FOR THERMAL-BARRIER COATINGS UNDER TEMPERATURE GRADIENT
BS EN 61591 : 1997 HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
IEC 63041-1:2017 Piezoelectric sensors - Part 1: Generic specifications
I.S. EN 62714-1:2014 ENGINEERING DATA EXCHANGE FORMAT FOR USE IN INDUSTRIAL AUTOMATION SYSTEMS ENGINEERING - PART 1: ARCHITECTURE AND GENERAL REQUIREMENTS
I.S. EN ISO 6892-2:2011 METALLIC MATERIALS - TENSILE TESTING - PART 2: METHOD OF TEST AT ELEVATED TEMPERATURE
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
S.R. CLC/TS 50640:2015 CLOTHES WASHING MACHINES FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE
UNI CEI ISO 80000-10 : 2010 QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS
I.S. EN ISO 19288:2016 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF MAGNESIUM AND MAGNESIUM ALLOYS CLASSIFICATION (ISO 19288:2016)
ISO 19652:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for complete decomposition performance of semiconducting photocatalytic materials under indoor lighting environment — Decomposition of acetaldehyde
I.S. EN 16481:2014 TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
I.S. EN 61786-1:2014 MEASUREMENT OF DC MAGNETIC, AC MAGNETIC AND AC ELECTRIC FIELDS FROM 1 HZ TO 100 KHZ WITH REGARD TO EXPOSURE OF HUMAN BEINGS - PART 1: REQUIREMENTS FOR MEASURING INSTRUMENTS
UNE-EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
UNE-EN ISO 544:2011 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2011)
NASA KSC DF 107 : 2017 TECHNICAL DOCUMENTATION STYLE GUIDE
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
ISO 19973-4:2014 Pneumatic fluid power Assessment of component reliability by testing Part 4: Pressure regulators
I.S. EN ISO 11357-4:2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY (ISO 11357-4:2014)
BS EN 140401-804 : 2011 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
ANSI HGV 3.1 : 2015 FUEL SYSTEM COMPONENTS FOR COMPRESSED HYDROGEN GAS POWERED VEHICLES
BS EN ISO 13349:2010 Fans — Vocabulary and definitions of categories (ISO 13349:2010)
ISO 3183:2012 Petroleum and natural gas industries Steel pipe for pipeline transportation systems
UNE-EN ISO 17672:2017 Brazing - Filler metals (ISO 17672:2016)
API 6D :2015 SPECIFICATION FOR PIPELINE AND PIPING VALVES
ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
PD IEC/TR 60601-4-3:2015 Medical electrical equipment Guidance and interpretation. Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
PREN 12420 : DRAFT 2012 COPPER AND COPPER ALLOYS - FORGINGS
UNE-EN 60705:2015 Household microwave ovens - Methods for measuring performance
API 19V : 2013 SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
IEC TS 62720:2017 Identification of units of measurement for computer-based processing
ISO 13643-1:2017 Ships and marine technology — Manoeuvring of ships — Part 1: General concepts, quantities and test conditions
ISO 9928-2:2014 Cranes Crane operating manual Part 2: Mobile cranes
EN ISO 80601-2-55:2018 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018)
ISO 13643-2:2017 Ships and marine technology — Manoeuvring of ships — Part 2: Turning and yaw checking
ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
ISO 13584-32:2010 Industrial automation systems and integration — Parts library — Part 32: Implementation resources: OntoML: Product ontology markup language
EN ISO 24598:2012 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012)
ISO 11891:2012 Hot formed helical compression springs — Technical specifications
ISO 80601-2-55:2018 Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
ISO 544:2017 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
IEC 60255-24:2013 Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems
ISO 10204:2017 Iron ores — Determination of magnesium — Flame atomic absorption spectrometric method
IEC 62679-1-1:2014 Electronic paper displays - Part 1-1: Terminology
EN 12420:2014 Copper and copper alloys - Forgings
IEC 60350-1 REDLINE : 2ED 2016 HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 1: RANGES, OVENS, STEAM OVENS AND GRILLS - METHODS FOR MEASURING PERFORMANCE
ISO 8287:2011 Magnesium and magnesium alloys Unalloyed magnesium Chemical composition
EN ISO 717-2:2013 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
I.S. EN 60115-1:2011 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 60115-1:2008, MODIFIED)
IEC 60679-1:2017 Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification
EN 12163:2016 Copper and copper alloys - Rod for general purposes
DIN EN ISO 17634:2015-12 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED METAL ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 17634:2015)
DIN EN ISO 1628-1:2012-10 Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012
DIN EN 1976:2013-01 COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS
DIN EN 12420:2014-09 COPPER AND COPPER ALLOYS - FORGINGS
DIN EN ISO 11960:2014-05 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2014); English version EN ISO 11960:2014, only on CD-ROM
DIN EN ISO 2560:2010-03 Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009)
DIN EN ISO 18273:2016-05 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015)
DIN EN ISO 18274:2011-04 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
DIN EN 12166:2015-12 (Draft) COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES
ISO 14629:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders
ISO 13123:2011 Metallic and other inorganic coatings — Test method of cyclic heating for thermal-barrier coatings under temperature gradient
BS EN 12168:1998 Copper and copper alloys. Hollow rod for free machining purposes
BS EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
ISO 17777:2016 Welding consumables Covered electrodes for manual metal arc welding of copper and copper alloys Classification
BS EN ISO 21809-2:2014 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Single layer fusion-bonded epoxy coatings
BS EN ISO 9906:2012 Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3
UNE-EN 60825-1:2015 Safety of laser products - Part 1: Equipment classification and requirements
DIN EN ISO 9906:2013-03 ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012)
BS EN 12438:2017 Magnesium and magnesium alloys. Magnesium alloys for cast anodes
UNE-EN 1982:2018 Copper and copper alloys - Ingots and castings
UNE-EN 12438:2018 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
IEC 62575-1:2015 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
UNE-EN 12450:2013 Copper and copper alloys - Seamless, round copper capillary tubes
I.S. EN ISO 2560:2009 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
I.S. EN 60825-1:2014 SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
I.S. EN ISO 24034:2010 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION
UNE-EN 12449:2016 Copper and copper alloys - Seamless, round tubes for general purposes
ONORM EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
EN ISO 24034:2010 Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2010)
UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
EN 140401-804:2011/A1:2013 DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
EN ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010)
EN ISO 14341:2011 Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification (ISO 14341:2010)
EN ISO 25239-4:2011 Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011)
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
EN ISO 6848:2015 ARC WELDING AND CUTTING - NONCONSUMABLE TUNGSTEN ELECTRODES - CLASSIFICATION (ISO 6848:2015)
EN ISO 21809-2:2014 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
UNI EN 1976 : 2012 COPPER AND COPPER ALLOYS - CAST UNWROUGHT COPPER PRODUCTS
UNI EN 1172 : 2012 COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES
UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
UNI EN 13599 : 2014 COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES
UNI EN 12451 : 2012 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
UNI EN ISO 9906 : 2012 ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3
UNI EN 12420 : 2014 COPPER AND COPPER ALLOYS - FORGINGS
UNI EN ISO 13686 : 2013 NATURAL GAS - QUALITY DESIGNATION
UNI EN 1520 : 2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement
UNI EN 1559-1 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNI EN ISO 28781 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT
UNI EN 14700 : 2014 WELDING CONSUMABLES - WELDING CONSUMABLES FOR HARD-FACING
UNI EN 12450 : 2013 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES
UNI EN ISO 16834 : 2012 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
EN 14870-1:2011 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
UNI EN ISO 18274 : 2011 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID STRIP ELECTRODES, SOLID WIRES AND SOLID RODS FOR FUSION WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION
UNI EN 12452 : 2012 COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS
UNI EN 1977 : 2013 COPPER AND COPPER ALLOYS - COPPER DRAWING STOCK (WIRE ROD)
UNI EN 13602 : 2013 COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
CSA C22.2 No. 60079.1 : 2016 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
UNI EN 764-2 : 2012 PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS
UNI EN 13148 : 2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
UNI EN 13604 : 2013 COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
BS ISO 7503-3:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination Apparatus calibration
BS EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of bulk density of ceramic powders Untapped density
DIN ISO 13643-1 E : 2015 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 1: GENERAL CONCEPTS, QUANTITIES AND TEST CONDITIONS (ISO 13643-1:2013)
17/30363142 DC : 0 BS EN 61591 ED.2.0 - COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE
BIS IS/ISO 80000-5 : 2007 QUANTITIES AND UNITS - PART 5: THERMODYNAMICS
13/30272270 DC : 0 BS ISO 17411 - OPTICS AND PHOTONICS - OPTICAL MATERIALS AND COMPONENTS - TEST METHOD FOR HOMOGENEITY OF OPTICAL GLASSES BY LASER INTERFEROMETRY
BS EN 16481:2014 Timber stairs. Structural design. Calculation methods
DIN EN ISO 11357-4:2014-10 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
13/30294752 DC : 0 BS ISO 19973-3 - PNEUMATIC FLUID POWER - ASSESSMENT OF COMPONENT RELIABILITY BY TESTING - PART 3: CYLINDERS WITH PISTON ROD
UNI EN ISO 17769-2 : 2012 LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 2: PUMPING SYSTEM
BS ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Operator’s manuals. Content and format
ISO 13643-3:2017 Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering
11/30199652 DC : 0 BS ISO 22197-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 4: REMOVAL OF FORMALDEHYDE
BS ISO 14188:2012 Metallic and other inorganic coatings. Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
ISO 24213:2017 Metallic materials — Sheet and strip — Method for springback evaluation in stretch bending
DIN EN ISO 6892-3:2015-07 METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015)
DIN ISO 18352 E : 2017 CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009)
11/30239968 DC : 0 BS EN 16245-1 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS
DIN EN ISO 80000-5 E : 2013 QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007)
11/30240465 DC : 0 BS EN 13604 - COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
ISO 12641-1:2016 Graphic technology Prepress digital data exchange Colour targets for input scanner calibration Part 1: Colour targets for input scanner calibration
UNI CEI EN ISO 80000-2 : 2013 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY
10/30198921 DC : 0 BS ISO 11891 - HOT FORMED HELICAL COMPRESSION SPRINGS - TECHNICAL SPECIFICATIONS
BS EN 60115-8:2012 Fixed resistors for use in electronic equipment Sectional specification. Fixed surface mount resistors
ISO 16038:2017 Male condoms — Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms
16/30348139 DC : 0 BS EN ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS
14/30292935 DC : 0 BS ISO 4000-1 - PASSENGER CAR TYRES AND RIMS - PART 1: TYRES (METRIC SERIES)
BS EN ISO 13123:2011 Metallic and other inorganic Coatings. Test method of cyclic heating for thermal barrier coatings under temperature gradient
11/30240468 DC : 0 BS EN 13605 - COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
CSA B109 : 2017 NATURAL GAS FOR VEHICLES INSTALLATION CODE
I.S. EN ISO 21809-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
16/30340174 DC : 0 BS ISO 16220 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOY INGOTS AND CASTINGS
10/30237986 DC : 0 BS EN 140401-804 - DETAIL SPECIFICATION: FIXED LOW POWER FILM HIGH STABILITY SMD RESISTORS - RECTANGULAR - STABILITY CLASSES 0,1; 0,25
BS ISO 22400-1:2014 Automation systems and integration. Key performance indicators (KPIs) for manufacturing operations management Overview, concepts and terminology
14/30280850 DC : 0 BS EN 60384-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
06/30126364 DC : 0 IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY
DIN 1338:2011-03 Writing and typesetting of formulae
UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)
16/30278559 DC : 0 BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS
ISO 18762:2016 Tubes of titanium and titanium alloys Welded tubes for condensers and heat exchangers Technical delivery conditions
12/30230676 DC : 0 BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
ISO 24155:2016 Hydrometry Hydrometric data transmission systems Specification of system requirements
I.S. EN 62884-2:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 2: PHASE JITTER MEASUREMENT METHOD
I.S. EN ISO 18275:2012 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011)
BS EN 16245-1:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics General requirements
AWS A5.5/A5.5M : 2014 SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
EN ISO 544:2017 Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017)
BS EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks
13/30283636 DC : 0 BS ISO 13179-1 - IMPLANTS FOR SURGERY - PLASMA-SPRAYED UNALLOYED TITANIUM COATINGS ON SURGICAL IMPLANTS - PART 1: GENERAL REQUIREMENTS
I.S. EN ISO 12153:2012 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION (ISO 12153:2011)
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
CEI EN 60079-35-2 : 2013 EXPLOSIVE ATMOSPHERES - PART 35-2: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PERFORMANCE AND OTHER SAFETY-RELATED MATTERS
NF EN ISO 21809-3 : 2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
BS IEC 62715-1-1:2013 Flexible display devices Terminology and letter symbols
12/30218281 DC : 0 BS ISO 80003-3 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 3: CHEMISTRY
BS ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for cyclic bending fatigue of porous ceramics at room temperature
BS ISO 19635:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for antialgal activity of semiconducting photocatalytic materials
14/30313073 DC : 0 BS EN 61591:1997 +A12 - HOUSEHOLD RANGE HOODS AND OTHER COOKING FUME EXTRACTORS - METHODS FOR MEASURING PERFORMANCE
BS ISO 15241:2012 Rolling bearings. Symbols for physical quantities
BS EN ISO 14171:2010 Welding consumables. Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels. Classification
DIN ISO 13643-1:2015-10 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 1: GENERAL CONCEPTS, QUANTITIES AND TEST CONDITIONS (ISO 13643-1:2013)
13/30287693 DC : 0 BS EN ISO 17632 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
DIN EN ISO 6892-3 E : 2015 METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015)
17/30302770 DC : 0 BS ISO 13779-3 - IMPLANTS FOR SURGERY - HYDROXYAPATITE - PART 3: CHEMICAL ANALYSIS AND CHARACTERIZATION OF CRYSTALLINITY RATIO AND PHASE PURITY
DIN ISO 13643-4 E : 2015 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 4: STOPPING, ACCELERATION, TRAVERSING (ISO 13643-4:2013)
BS ISO 16220:2017 Magnesium and magnesium alloys. Magnesium alloy ingots and castings
ONORM EN ISO 1628-1 : 2012 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009 + AMD 1:2012)
BS ISO 16038:2017 Male condoms. Guidance on the use of ISO 4074 and ISO 23409 in the quality management of condoms
DIN EN ISO 17672:2015-04 (Draft) BRAZING - FILLER METALS (ISO 17672:2016)
16/30343195 DC : 0 BS ISO 13643-3 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 3: YAW STABILITY AND STEERING
15/30296836 DC : 0 BS ISO 18071 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ANTIVIRAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - TEST METHOD USING BACTERIOPHAGE Q-BETA
BS ISO 9277:2010 Determination of the specific surface area of solids by gas adsorption. BET method
10/30233141 DC : 0 BS EN ISO 16834 - WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS-SHIELDED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
12/30246885 DC : 0 BS ISO 16842 - METALLIC MATERIALS - SHEET AND STRIP - BIAXIAL TENSILE TESTING METHOD USING CRUCIFORM SPECIMEN
11/30250542 DC : 0 BS EN ISO 12153 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NICKEL AND NICKEL ALLOYS - CLASSIFICATION
EN 60350-1:2016 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring Performance
11/30240453 DC : 0 BS EN 13600 - COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES
PREN 13604 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER
DIN 1301-1:2010-10 Units - Part 1: Unit names, unit symbols
BS ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
BS ISO 9928-1:2015 Cranes. Crane operating manual General
16/30323238 DC : 0 BS EN ISO 17633 - WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION
BS ISO 80000-2 : 2009 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY
BS ISO 24213:2017 Metallic materials. Sheet and strip. Method for springback evaluation in stretch bending
10/30229550 DC : 0 BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS
AWS A5.10/A5.10M : 2012 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINUM AND ALUMINUM-ALLOYS - CLASSIFICATION
BS EN ISO 17769-1:2012 Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units Liquid pumps
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
I.S. EN 60079-35-2:2012 EXPLOSIVE ATMOSPHERES - PART 35-2: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PERFORMANCE AND OTHER SAFETY-RELATED MATTERS (IEC 60079-35-2:2011 (EQV))
BS EN ISO 17769-2:2012 Liquid pumps and installation. General terms, definitions, quantities, letter symbols and units Pumping System
IEEE/ASTM SI 10-2016 American National Standard for Metric Practice
17/30347905 DC : 0 BS ISO 11929-1 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 1: ELEMENTARY APPLICATIONS
ISO 11943:1999 Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation
UNI EN ISO 11357-4 : 2014 PLASTICS - DIFFERENTIAL SCANNING CALORIMETRY (DSC) - PART 4: DETERMINATION OF SPECIFIC HEAT CAPACITY
BS EN 50229:2015 Electric clothes washer-dryers for household use. Methods of measuring the performance
BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
UNI ISO 7301 : 2013 RICE - SPECIFICATION
16/30343192 DC : 0 BS ISO 13643-2 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 2: TURNING AND YAW CHECKING
UNI EN ISO 14341 : 2011 WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for thermal fatigue of fine ceramics substrate
DIN EN ISO 13123:2012-04 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
ISO 16792:2015 Technical product documentation Digital product definition data practices
BS ISO 17841:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for thermal fatigue of fine ceramics substrate
UNI CEI EN ISO 80000-5 : 2013 QUANTITIES AND UNITS - PART 5: THERMODYNAMICS
ISO/TR 13014:2012 Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
UNI CEI EN ISO 80000-10 : 2013 QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS
UNI EN ISO 3690 : 2012 WELDING AND ALLIED PROCESSES - DETERMINATION OF HYDROGEN CONTENT IN ARC WELD METAL
I.S. EN ISO 17632:2015 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION (ISO 17632:2015)
CSA/ANSI NGV 5.2-2017 Vehicle fueling appliances (VFA)
I.S. EN ISO 24598:2012 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 24598:2012)
UNI EN ISO 3183 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
UNE-EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
UNI EN ISO 27509 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - COMPACT FLANGED CONNECTIONS WITH 9 SEAL RING
I.S. EN ISO 80000-10:2013 QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009)
I.S. EN ISO 6892-1:2016 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016)
I.S. EN 60350-1:2016 HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 1: RANGES, OVENS, STEAM OVENS AND GRILLS - METHODS FOR MEASURING PERFORMANCE
I.S. EN ISO 6892-3:2015 METALLIC MATERIALS - TENSILE TESTING - PART 3: METHOD OF TEST AT LOW TEMPERATURE (ISO 6892-3:2015)
I.S. EN ISO 25239-4:2011 FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011)
EN 60679-1:2017 Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification
ISO/TS 17536-2:2017 Road vehicles — Aerosol separator performance test for internal combustion engines — Part 2: Laboratory test method
DIN EN ISO 80000-5:2016-02 (Draft) QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007)
ONORM EN ISO 11960 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
I.S. EN ISO 23145-2:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF BULK DENSITY OF CERAMIC POWDERS - PART 2: UNTAPPED DENSITY (ISO 23145-2:2012)
ISO 16249:2013 Springs — Symbols
I.S. EN ISO 26304:2018 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2017)
ISO 19973-3:2015 Pneumatic fluid power Assessment of component reliability by testing Part 3: Cylinders with piston rod
EN 61987-24-2:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-2: List of properties (LOPs) of valve/actuator accessories for electronic data exchange
I.S. EN 50242:2016 ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
ISO 7301:2011 Rice Specification
CSA 12.3 : 2014 FUEL SYSTEM COMPONENTS FOR COMPRESSED NATURAL GAS POWERED VEHICLES
ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors Performance testing
DIN EN ISO 80000-10:2016-09 (Draft) QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009)
BS ISO 5393:2017 Rotary tools for threaded fasteners. Performance test method
BS EN 61121:2013 Tumble dryers for household use. Methods for measuring the performance
ISO 20032:2013 Method for evaluation of tensile properties of metallic superplastic materials
UNE-EN ISO 24598:2013 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012)
ISO 2597-2:2015 Iron ores Determination of total iron content Part 2: Titrimetric methods after titanium(III) chloride reduction
BS ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of acetaldehyde
I.S. EN ISO 14629:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FLOWABILITY OF CERAMIC POWDERS (ISO 14629:2012)
PREN 12449 : DRAFT 2011 COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
EN IEC 63041-2:2018 Piezoelectric Sensors - Part 2: Chemical and Biochemical Sensors
EN 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
SAE J 3049 : 2015 MODEL ARCHITECTURE AND INTERFACES RECOMMENDED PRACTICE FOR GROUND VEHICLE SYSTEM AND SUBSYSTEM DYNAMICAL SIMULATION
EN ISO 21809-5:2017 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 5: External concrete coatings (ISO 21809-5:2017)
ISO 12490:2011 Petroleum and natural gas industries — Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
EN ISO 26304:2018 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2017)
EN ISO 18275 : 2012 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011)
EN ISO 3690:2012 Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012)
ISO 11894-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for conductivity measurement of ion-conductive fine ceramics — Part 1: Oxide-ion-conducting solid electrolytes
ISO/TS 13499:2014 Road vehicles Multimedia data exchange format for impact tests
EN 12861:2018 Copper and copper alloys - Scrap
ISO 19973-2:2015 Pneumatic fluid power Assessment of component reliability by testing Part 2: Directional control valves
ISO 19973-5:2015 Pneumatic fluid power Assessment of component reliability by testing Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature
IEC 61747-1-2:2014 Liquid crystal display devices - Part 1-2: Generic - Terminology and letter symbols
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
ISO 22400-1:2014 Automation systems and integration — Key performance indicators (KPIs) for manufacturing operations management — Part 1: Overview, concepts and terminology
I.S. EN 62391-1:2016 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
ISO 22197-1:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 1: Removal of nitric oxide
I.S. EN 12861:1999 COPPER AND COPPER ALLOYS - SCRAP
ISO 10203:2017 Iron ores Determination of calcium Flame atomic absorption spectrometric method
IEC 61987-24-3:2017 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-3: Lists of properties (LOPs) of flow modification accessories for electronic data exchange
IEC 60350-1:2016 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
I.S. EN ISO 16061:2015 INSTRUMENTATION FOR USE IN ASSOCIATION WITH NON-ACTIVE SURGICAL IMPLANTS - GENERAL REQUIREMENTS (ISO 16061:2015)
UNE-EN ISO 21809-1:2019 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 60115-1:2011/A11:2015 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
DIN EN ISO 21952:2012-08 Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of creep-resisting steels - Classification (ISO 21952:2012)
DIN EN ISO 18276:2016-02 (Draft) WELDING CONSUMABLES - TUBULAR CORED ELECTRODES FOR GAS-SHIELDED AND NON-GAS-SHIELDED METAL ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 18276:2017)
DIN EN ISO 14172:2016-02 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)
DIN EN ISO 13686:2013-12 NATURAL GAS - QUALITY DESIGNATION (ISO 13686:2013)
BS EN 13605:2013 Copper and copper alloys. Copper profiles and profiled wire for electrical purposes
UNE-EN 1172:2012 Copper and copper alloys - Sheet and strip for building purposes
ISO 13349:2010 Fans — Vocabulary and definitions of categories
BS EN 12165:2011 Copper and copper alloys. Wrought and unwrought forging stock
BS EN ISO 13680:2010 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
UNE-EN ISO 6892-1:2017 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN 1982:2017 Copper and copper alloys. Ingots and castings
ISO 14171:2016 Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification
ISO 1071:2015 Welding consumables Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron Classification
UNE-EN 13602:2014 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
ISO 9906:2012 Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3
IEC 62595-1-1:2013 LCD backlight unit - Part 1-1: Generic specification
EN 60436 : 2016 ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A1:2009, MODIFIED + A2:2012, MODIFIED)
ISO 14341:2010 Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification
ISO 18273:2015 Welding consumables Wire electrodes, wires and rods for welding of aluminium and aluminium alloys Classification
IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
ISO 21809-2:2014 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings
ISO 16061:2015 Instrumentation for use in association with non-active surgical implants General requirements
BS EN 13107:2015 Safety requirements for cableway installations designed to carry persons. Civil engineering works
ISO 16961:2015 Petroleum, petrochemical and natural gas industries Internal coating and lining of steel storage tanks
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
BS EN ISO 16834:2012 Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels. Classification
ISO 6976:2016 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
IEC 61400-25-2:2015 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models
IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
ISO 17769-1:2012 Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps
IEC 60705:2010+AMD1:2014 CSV Household microwave ovens - Methods for measuring performance
UNE-EN 12452:2013 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
UNE-EN 13601:2014 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
BS EN 12451:2012 Copper and copper alloys. Seamless, round tubes for heat exchangers
UNE-EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
UNE-EN ISO 26304:2012 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification (ISO 26304:2011)
ISO 19001:2013 In vitro diagnostic medical devices — Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
UNE-EN 13148:2012 Copper and copper alloys - Hot-dip tinned strip
IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
UNE-EN ISO 18273:2016 Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2015)
ISO 19288:2016 Welding consumables Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys Classification
UNE-EN 12451:2013 Copper and copper alloys - Seamless, round tubes for heat exchangers
ISO 18274:2010 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
UNE-EN ISO 17634:2015 Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification (ISO 17634:2015)
UNE-EN 14700:2014 Welding consumables - Welding consumables for hard-facing
ISO 21542:2011 Building construction Accessibility and usability of the built environment
UNE-EN ISO 14172:2015 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)
UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
ISO 17634:2015 Welding consumables Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels Classification
BS EN 12167:2011 Copper and copper alloys. Profiles and bars for general purposes
UNE-EN ISO 18274:2011 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
IEC 80000-14:2008 Quantities and units - Part 14: Telebiometrics related to human physiology
ISO 16834:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification
ISO 17632:2015 Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification
ISO 18276:2017 Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification
ISO 12153:2011 Welding consumables — Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys — Classification
UNE-ISO 21542:2012 Building construction. Accessibility and usability of the built environment.
IEC 62391-1 : 2.0 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
IEC 60825-1:2014 Safety of laser products - Part 1: Equipment classification and requirements
BS EN ISO 1628-1 : 2009 PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009)
ISO 14343:2017 Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
ISO 80000-2:2009 Quantities and units Part 2: Mathematical signs and symbols to be used in the natural sciences and technology
IEC 60793-1-1 : 2017 OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE
ISO 80000-10:2009 Quantities and units Part 10: Atomic and nuclear physics
ISO 1628-1:2009 Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles
BS EN 764-2:2012 Pressure equipment Quantities, symbols and units
BS EN ISO 14172:2015 Welding consumables. Covered electrodes for manual metal arc welding of nickel and nickel alloys. Classification
UNE-EN 13600:2014 Copper and copper alloys - Seamless copper tubes for electrical purposes
BS EN ISO 717-1:2013 Acoustics. Rating of sound insulation in buildings and of building elements
BS EN ISO 17634:2015 Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels. Classification
IEC 61786-1:2013 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
UNE-EN 12420:2015 Copper and copper alloys - Forgings
BS EN 13599:2014 Copper and copper alloys. Copper plate, sheet and strip for electrical purposes
BS EN 13601:2013 Copper and copper alloys. Copper rod, bar and wire for general electrical purposes
ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
BS EN 12452:2012 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
ISO 25239-4:2011 Friction stir welding Aluminium Part 4: Specification and qualification of welding procedures
BS EN ISO 18276:2017 Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels. Classification
BS EN 12166:2011 Copper and copper alloys. Wire for general purposes
UNE-EN 12421:2017 Magnesium and magnesium alloys - Unalloyed magnesium
BS EN 13602:2013 Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors
BS EN 12164:2011 Copper and copper alloys. Rod for free machining purposes
ISO 14172:2015 Welding consumables — Covered electrodes for manual metal arc welding of nickel and nickel alloys — Classification
ISO 80000-9:2009 Quantities and units Part 9: Physical chemistry and molecular physics
UNE-EN ISO 18276:2017 Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2017)
ISO 3580:2017 Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
BS EN ISO 18274:2010 Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification
BS EN 13604:2013 Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
BS EN 14870-1:2011 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends
ISO 2560:2009 Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification
ISO 11357-4:2014 Plastics Differential scanning calorimetry (DSC) Part 4: Determination of specific heat capacity
ISO 17672:2016 Brazing Filler metals
EN 62595-1-1:2013 LCD backlight unit - Part 1-1: Generic specification
EN ISO 13686:2013 Natural gas - Quality designation (ISO 13686:2013)
EN ISO 18274:2010 Welding consumables - Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys - Classification (ISO 18274:2010)
EN ISO 80000-10:2013 Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009)
EN ISO 23145-2:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012)
EN ISO 17632:2015 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
EN 16481:2014 Timber stairs - Structural design - Calculation methods
EN ISO 10628-1:2015 Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014)
EN 13599:2014 Copper and copper alloys - Copper plate, sheet and strip for electrical purposes
EN ISO 80000-2:2013 Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology (ISO 80000-2:2009)
EN ISO 3580:2017 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
EN ISO 80000-9:2013 Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011)
EN ISO 6976:2016 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN ISO 14629:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012)
EN ISO 17777 : 2016 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF COPPER AND COPPER ALLOYS - CLASSIFICATION (ISO 17777:2016)
EN 13604:2013 Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
EN ISO 19288:2016 Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016)
EN ISO 13123:2011 Metallic and other inorganic coatings - Test method of cyclic heating for thermal-barrier coatings under temperature gradient (ISO 13123:2011)
EN ISO 12153:2012 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of nickel and nickel alloys - Classification (ISO 12153:2011)
EN ISO 80000-5:2013 Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007)
EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
EN ISO 636:2017 Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017)
EN 1520:2011 Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement
EN 4500-001:2012 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules
EN 1977:2013 Copper and copper alloys - Copper drawing stock (wire rod)
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN ISO 9906:2012 Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1, 2 and 3 (ISO 9906:2012)
EN 1976:2012 Copper and copper alloys - Cast unwrought copper products
EN 13602:2013 Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors
EN ISO 18273:2015 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES AND RODS FOR WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS - CLASSIFICATION (ISO 18273:2015)
EN ISO 14172:2015 Welding consumables - Covered electrodes for manual metal arc welding of nickel and nickel alloys - Classification (ISO 14172:2015)
EN ISO 17769-2:2012 Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 2: Pumping System (ISO 17769-2:2012)
EN ISO 1071:2015 Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015)
EN ISO 16961:2015 Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015)
EN ISO 13349:2010 Fans - Vocabulary and definitions of categories (ISO 13349:2010)
EN ISO 28781:2010 Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010)
EN 14700:2014 Welding consumables - Welding consumables for hard-facing
EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
EN ISO 14171:2016 Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification (ISO 14171:2016)
BIS IS/ISO 80000-2 : 2009 QUANTITIES AND UNITS - PART 2: MATHEMATICAL SIGNS AND SYMBOLS TO BE USED IN THE NATURAL SCIENCES AND TECHNOLOGY
DIN ISO 13643-4:2015-10 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 4: STOPPING, ACCELERATION, TRAVERSING (ISO 13643-4:2013)
DIN EN ISO 80000-9 E : 2013 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011)
BS EN 60440:2012 Method of measurement of non-linearity in resistors
BS EN ISO 16061:2015 Instrumentation for use in association with non-active surgical implants. General requirements
UNE-EN 80000-14:2011 Quantities and units - Part 14: Telebiometrics related to human physiology
ISO 18535:2016 Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
CEI EN 62595-1-1 : 2014 LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION
12/30244863 DC : 0 BS ISO 404 - STEEL AND STEEL PRODUCTS - GENERAL TECHNICAL DELIVERY REQUIREMENTS
16/30343594 DC : 0 BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS
17/30356403 DC : 0 BS EN 17116-3 - SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 3: CONTINUOUS TUNNEL WASHER
DIN 28000-2:2011-01 Chemical apparatus - Documentation in the life cycle of process plants - Part 2: Contents of documentation
PREN 13347 : DRAFT 2011 COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING
15/30274135 DC : 0 BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY
15/30293091 DC : 0 BS EN ISO 19288 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF MAGNESIUM AND MAGNESIUM ALLOYS - CLASSIFICATION
BS ISO/IEC 11179-3:2013 Information technology. Metadata registries (MDR) Registry metamodel and basic attributes
UNE-EN ISO 19001:2013 In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013)
BS EN ISO 28781:2010 Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment
11/30212259 DC : 0 BS ISO 14610 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FLEXURAL STRENGTH OF POROUS CERAMICS AT ROOM TEMPERATURE
ISO 27327-2:2014 Fans Air curtain units Part 2: Laboratory methods of testing for sound power
BS EN ISO 10628-1:2015 Diagrams for the chemical and petrochemical industry Specification of diagrams
UNI EN ISO 21809-2 : 2014 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 2: SINGLE LAYER FUSION-BONDED EPOXY COATINGS
15/30284779 DC : 0 BS EN ISO 17672 - BRAZING - FILLER METALS
14/30301977 DC : 0 BS ISO 10204 - IRON ORES - DETERMINATION OF MAGNESIUM - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
EN ISO 11960:2014 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR USE AS CASING OR TUBING FOR WELLS (ISO 11960:2014)
UNE-EN ISO 6892-3:2015 Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015)
NF ISO 28641 : 2010 RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS
CSA ISO/IEC 11179-3 : 2015 INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 3: REGISTRY METAMODEL AND BASIC ATTRIBUTES
11/30199655 DC : 0 BS ISO 22197-5 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 5: REMOVAL OF METHYL MERCAPTAN
BS ISO 18471:2015 Agricultural irrigation equipment. Filters. Verification of filtration grade
UNI EN ISO 21952 : 2012 WELDING CONSUMABLES - WIRE ELECTRODES, WIRES, RODS AND DEPOSITS FOR GAS SHIELDED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION
BS ISO 80000-10 : 2009 QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS
17/30358601 DC : 0 BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
ISO 20378:2017 Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification
BS EN 60350-2 : 2013 HOUSEHOLD ELECTRIC COOKING APPLIANCES - HOBS - METHODS FOR MEASURING PERFORMANCE
BS ISO 16525-3:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Determination of heat-transfer properties
CEI EN 60115-8 : 2013 FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT RESISTORS
API 16A : 2017 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
CEI EN 50242-60436 : 2009 ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
BS ISO 12490:2011 Petroleum and natural gas industries. Mechanical integrity and sizing of actuators and mounting kits for pipeline valves
04/30058025 DC : DRAFT MAR 2004 ISO 80000-4 - QUANTITIES AND UNITS - PART 4: MECHANICS
11/30240459 DC : 0 BS EN 13602 - COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
PD ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software
BS ISO 11891:2012 Hot formed helical compression springs. Technical specifications
14/30287678 DC : 0 BS EN ISO 1071 - WELDING CONSUMABLES - COVERED ELECTRODES, WIRES, RODS AND TUBULAR CORED ELECTRODES FOR FUSION WELDING OF CAST IRON - CLASSIFICATION
BS ISO 7301:2011 Rice. Specification
13/30262073 DC : 0 BS ISO 18061 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF ANTIVIRAL ACTIVITY OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - TEST METHOD USING BACTERIOPHAGE Q-BETA
17/30300673 DC : 0 BS ISO 19652 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPLETE DECOMPOSITION PERFORMANCE OF SEMICONDUCTING PHOTO CATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - DECOMPOSITION OF ACETALDEHYDE
BS ISO 18405:2017 Underwater acoustics. Terminology
BS ISO 16842:2014 Metallic materials. Sheet and strip. Biaxial tensile testing method using a cruciform test piece
BS ISO 13643-1:2017 Ships and marine technology. Manoeuvring of ships General concepts, quantities and test conditions
BS ISO 19973-5:2015 Pneumatic fluid power. Assessment of component reliability by testing Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
UNE-EN ISO 21809-2:2015 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Single layer fusion-bonded epoxy coatings (ISO 21809-2:2014)
BS EN 60436 : 2008 ELECTRIC DISHWASHERS FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE (IEC 60436:2004, MODIFIED + A1:2009, MODIFIED + A2:2012, MODIFIED)
15/30323235 DC : 0 BS EN ISO 14171 - WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE/FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
PREN 17116-2 : DRAFT 2017 SPECIFICATIONS FOR INDUSTRIAL LAUNDRY MACHINES - DEFINITIONS AND TESTING OF CAPACITY AND CONSUMPTION CHARACTERISTICS - PART 2: BATCH DRYING TUMBLERS
DIN EN ISO 25239-4:2012-03 FRICTION STIR WELDING - ALUMINIUM - PART 4: SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES (ISO 25239-4:2011)
10/30200334 DC : 0 BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES
IEC 62512:2012 Electric clothes washer-dryers for household use - Methods for measuring the performance
ISO 19635:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for antialgal activity of semiconducting photocatalytic materials
BS EN ISO 19288:2016 Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys. Classification
15/30327648 DC : 0 BS EN 12421 - MAGNESIUM AND MAGNESIUM ALLOYS - UNALLOYED MAGNESIUM
DIN ISO 13643-2 E : 2015 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 2: TURNING AND YAW CHECKING (ISO 13643-2:2013)
16/30334062 DC : 0 BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS
07/30126390 DC : 0 BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT
08/30107200 DC : DRAFT SEP 2008 BS ISO 10241-1 - TERMINOLOGICAL ENTRIES IN STANDARDS - PART 1: GENERAL REQUIREMENTS AND EXAMPLES OF PRESENTATION
12/30240396 DC : 0 BS ISO 80003-2 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 2: PHYSICS
17/30361515 DC : DRAFT SEP 2017 BS EN ISO 2401 - WELDING CONSUMABLES - COVERED ELECTRODES - DETERMINATION OF THE EFFICIENCY, METAL RECOVERY AND DEPOSITION COEFFICIENT
16/30343198 DC : 0 BS ISO 13643-4 - SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 4: STOPPING, ACCELERATION, TRAVERSING
16/30350798 DC : 0 BS EN ISO 544 - WELDING CONSUMABLES - TECHNICAL DELIVERY CONDITIONS FOR FILLER MATERIALS AND FLUXES - TYPE OF PRODUCT, DIMENSIONS, TOLERANCES AND MARKINGS
I.S. EN ISO 17672:2016 BRAZING - FILLER METALS (ISO 17672:2016)
BIS IS/IEC 80000-14 : 2008 QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY
BS EN ISO 636:2015 Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification
15/30314901 DC : 0 BS EN ISO 14343 - WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION
I.S. EN 60440:2012 METHOD OF MEASUREMENT OF NON-LINEARITY IN RESISTORS (IEC 60440:2012 (EQV))
16/30352880 DC : 0 BS EN 62714-1 - ENGINEERING DATA EXCHANGE FORMAT FOR USE IN INDUSTRIAL AUTOMATION SYSTEMS ENGINEERING - AUTOMATION MARKUP LANGUAGE - PART 1: ARCHITECTURE AND GENERAL REQUIREMENTS
BS ISO 14610:2012 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of porous ceramics at room temperature
I.S. EN ISO 17769-2:2012 LIQUID PUMPS AND INSTALLATION - GENERAL TERMS, DEFINITIONS, QUANTITIES, LETTER SYMBOLS AND UNITS - PART 2: PUMPING SYSTEM (ISO 17769-2:2012)
EN 13605:2013 Copper and copper alloys - Copper profiles and profiled wire for electrical purposes
ISO/TS 15926-6:2013 Industrial automation systems and integration Integration of life-cycle data for process plants including oil and gas production facilities Part 6: Methodology for the development and validation of reference data
BS ISO 10203:2017 Iron ores. Determination of calcium. Flame atomic absorption spectrometric method
BS EN ISO 14341:2011 Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
BS ISO 17536-1:2015 Road vehicles. Aerosol separator performance test for internal combustion engines General
15/30327651 DC : 0 BS EN 12438 - MAGNESIUM AND MAGNESIUM ALLOYS - MAGNESIUM ALLOYS FOR CAST ANODES
BS EN 60705 : 2015 HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE
BS ISO 22197-5:2013 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of methyl mercaptan
BIP 2221 : 2013 IMPLEMENTING AND IMPROVING AN ENERGY MANAGEMENT SYSTEM: HOW TO MEET THE REQUIREMENTS OF ISO 50001
11/30247086 DC : 0 BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
PD ISO/TS 17536-3:2014 Road vehicles. Aerosol separator performance test for internal combustion engines Method to perform engine gravimetric test
DIN EN ISO 6892-1:2017-02 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016)
NF EN ISO 14341 : 2011 WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
BS ISO 28641:2010 Rubber compounding ingredients. Organic chemicals. General test methods
DIN EN ISO 19001:2013-07 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER WITH IN VITRO DIAGNOSTIC REAGENTS FOR STAINING IN BIOLOGY (ISO 19001:2013)
DIN EN 16245-1:2013-07 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 1: GENERAL REQUIREMENTS
BS ISO 19722:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption
16/30323181 DC : 0 BS ISO 20378 - WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION
BS ISO 24155:2016 Hydrometry. Hydrometric data transmission systems. Specification of system requirements
DIN ISO 13643-3:2015-10 SHIPS AND MARINE TECHNOLOGY - MANOEUVRING OF SHIPS - PART 3: YAW STABILITY AND STEERING (ISO 13643-3:2013)
UNE-EN ISO 3580:2018 Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification (ISO 3580:2017)
16/30312315 DC : 0 BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
ISO 9928-1:2015 Cranes Crane operating manual Part 1: General
EN 13601:2013 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
UNI CEI EN ISO 80000-9 : 2013 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS
EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators – Part 3: Frequency aging test methods
ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
DIN EN ISO 80000-10 E : 2013 QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009)
API 6DX : 2012 ACTUATOR SIZING AND MOUNTING KITS FOR PIPELINE VALVES
DIN EN ISO 13349:2012-07 Fans - Vocabulary and definitions of categories (ISO 13349:2010)
PREN 13602 : DRAFT 2011 COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS
DIN EN ISO 3183:2013-03 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS (ISO 3183:2012)
UNE-EN 60350-1:2014 Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance
PREN 4500-001 : 200P2 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
I.S. EN 60079-1:2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 SPECIFICATION FOR DRILL-THROUGH EQUIPMENT
I.S. EN 62703:2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV))
AWS A5.4/A5.4M : 2012 SPECIFICATION FOR STAINLESS STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING
UNI EN 16481 : 2014 TIMBER STAIRS - STRUCTURAL DESIGN - CALCULATION METHODS
UNE-EN 16245-1:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
ISO 13175-3:2012 Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
I.S. EN ISO 80000-9:2013 QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011)
IEEE/IEC C37.111-2013 REDLINE IEEE/IEC International Standard - Measuring relays and protection equipment - Part 24: Common format for transient data exchange (COMTRADE) for power systems
I.S. EN ISO 80601-2-55:2018 MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 80601-2-55:2018)
I.S. EN ISO 3581:2016 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 3581:2016, CORRECTED VERSION 2017-11-01)
IEC 60793-1-1:2017 RLV Optical fibres - Part 1-1: Measurement methods and test procedures - General and guidance
AWS A5.16/A5.16M : 2013 SPECIFICATION FOR TITANIUM AND TITANIUM-ALLOY WELDING ELECTRODES AND RODS
I.S. EN ISO 14341:2011 WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION
ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format
ISO 15241:2012 Rolling bearings — Symbols for physical quantities
ISO 8573-2:2018 Compressed air — Contaminant measurement — Part 2: Oil aerosol content
I.S. EN ISO 636:2017 WELDING CONSUMABLES - RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT GAS WELDING OF NON-ALLOY AND FINE-GRAIN STEELS - CLASSIFICATION (ISO 636:2017)
UNE-EN ISO 6892-2:2011 Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011)
UNE-EN ISO 17632:2016 Welding consumables - Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels - Classification (ISO 17632:2015)
I.S. EN ISO 17633:2018 WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION (ISO 17633:2017)
ISO 12829:2016 Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope
NF EN 62595-1-1 : 2013 LCD BACKLIGHT UNIT - PART 1-1: GENERIC SPECIFICATION
ISO 28704:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature
I.S. EN ISO 16961:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015)
ISO 16630:2017 Metallic materials — Sheet and strip — Hole expanding test
ISO 16332:2018 Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
I.S. EN 60350-2:2018 HOUSEHOLD ELECTRIC COOKING APPLIANCES - PART 2: HOBS - METHODS FOR MEASURING PERFORMANCE
CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
NF EN ISO 3183 : 2013 PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS
CSA NGV 6.1 : 2016 COMPRESSED NATURAL GAS (CNG) FUEL STORAGE AND DELIVERY SYSTEMS FOR ROAD VEHICLES
DIN EN ISO 24598:2012-08 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF CREEP-RESISTING STEELS - CLASSIFICATION (ISO 24598:2012)
DIN EN ISO 18275:2012-07 WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF HIGH-STRENGTH STEELS - CLASSIFICATION (ISO 18275:2011)
I.S. EN 4500-001:2012 AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES
NF EN ISO 26304 : 2011 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION
S.R. CLC/TS 50594:2015 TUMBLE DRYERS FOR COMMERCIAL USE - METHODS FOR MEASURING THE PERFORMANCE
UNE-EN ISO 3581:2016 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2016, Corrected version 2017-11-01)
BS ISO 15633:2017 Iron ores. Determination of nickel. Flame atomic absorption spectrometric method
NF EN ISO 14174 : 2012 WELDING CONSUMABLES - FLUXES FOR SUBMERGED ARC WELDING AND ELECTROSLAG WELDING - CLASSIFICATION
EN ISO 14174:2012 Welding consumables - Fluxes for submerged arc welding and electroslag welding - Classification (ISO 14174:2012)
IEC 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
ISO 22197-5:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 5: Removal of methyl mercaptan
BS EN 62391-1:2016 Fixed electric double-layer capacitors for use in electric and electronic equipment Generic specification
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 21809-5:2017 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings
I.S. EN 80000-14:2009 QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY
DIN EN ISO 26304:2011-11 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, TUBULAR CORED ELECTRODES AND ELECTRODE-FLUX COMBINATIONS FOR SUBMERGED ARC WELDING OF HIGH STRENGTH STEELS - CLASSIFICATION (ISO 26304:2011)
BS EN 60456:2016 Clothes washing machines for household use. Methods for measuring the performance
ISO 21809-1:2011 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 28641:2010 Rubber compounding ingredients Organic chemicals General test methods
DIN EN ISO 24034:2011-01 WELDING CONSUMABLES - SOLID WIRE ELECTRODES, SOLID WIRES AND RODS FOR FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS - CLASSIFICATION
I.S. EN 60793-1-1:2017 OPTICAL FIBRES - PART 1-1: MEASUREMENT METHODS AND TEST PROCEDURES - GENERAL AND GUIDANCE
ISO 26304:2017 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels — Classification
ISO 22197-4:2013 Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 4: Removal of formaldehyde
ISO 14817-1:2015 Intelligent transport systems — ITS central data dictionaries — Part 1: Requirements for ITS data definitions
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
IEC 62715-1-1:2013 Flexible display devices - Part 1-1: Terminology and letter symbols
UNE-EN ISO 717-1:2013 Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation (ISO 717-1:2013)
CSA 3.8 : 2014 GAS-FIRED EQUIPMENT FOR DRYING FARM CROPS
DIN EN 13601:2013-09 Copper and copper alloys - Copper rod, bar and wire for general electrical purposes
DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
DIN EN 13600:2013-09 Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013
BS EN ISO 18273:2015 Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification
BS EN ISO 24034:2010 Welding consumables. Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys. Classification
ISO 6892-3:2015 Metallic materials Tensile testing Part 3: Method of test at low temperature
ISO 17769-2:2012 Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system
ISO 28781:2010 Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment
BS EN ISO 1071:2015 Welding consumables. Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron. Classification
13/30286778 DC : 0 BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
ISO 13686:2013 Natural gas Quality designation
BS EN 1977:2013 Copper and copper alloys. Copper drawing stock (wire rod)
BS EN ISO 21952:2012 Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels. Classification
ISO 27509:2012 Petroleum and natural gas industries Compact flanged connections with IX seal ring
BS EN ISO 717-2:2013 Acoustics. Rating of sound insulation in buildings and of building elements Impact sound insulation
PD IEC/TR 62354:2014 General testing procedures for medical electrical equipment
BS EN 12421:2017 Magnesium and magnesium alloys. Unalloyed magnesium
ISO 10628-1:2014 Diagrams for the chemical and petrochemical industry Part 1: Specification of diagrams
DIN EN ISO 80000-10:2013-08 QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009)
EN 61121:2013 Tumble dryers for household use - Methods for measuring the performance
EN ISO 16061:2015 Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2015)
EN 13148 : 2010 COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP
EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
EN 62714-1:2014 Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 1: Architecture and general requirements
CLC/TS 50640:2015 Clothes washing machines for commercial use - Methods for measuring the performance
EN 61786-1:2014 Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 1: Requirements for measuring instruments
EN 60079-35-2:2012 Explosive atmospheres - Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters
EN 12450:2012 Copper and copper alloys - Seamless, round copper capillary tubes
EN 60115-8:2012 Fixed resistors for use in electronic equipment - Part 8: Sectional specification - Fixed surface mount resistors
EN ISO 17769-1:2012 Liquid pumps and installation - General terms, definitions, quantities, letter symbols and units - Part 1: Liquid pumps (ISO 17769-1:2012)
EN 1172:2011 Copper and copper alloys - Sheet and strip for building purposes
EN 12452:2012 Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers
EN 61400-25-2:2015 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models
EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 60440 : 2012 Method of measurement of non-linearity in resistors
DIN SPEC 4002-102:2011-05 PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET
EN 62391-1:2016/AC:2016-12 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION (IEC 62391-1:2015/COR1:2016)
DIN EN ISO 14343:2010-04 WELDING CONSUMABLES - WIRE ELECTRODES, STRIP ELECTRODES, WIRES AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS - CLASSIFICATION (ISO 14343:2017)
API SPEC 6D:2021+ERR 3:2023 Specification for Valves

AS 1391:2020 Metallic materials - Tensile testing - Method of test at room temperature
ISO 80000-9:2009 Quantities and units Part 9: Physical chemistry and molecular physics
IEC 60027-1:1992 Letters symbols to be used in electrical technology - Part 1: General
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 80000-2:2009 Quantities and units Part 2: Mathematical signs and symbols to be used in the natural sciences and technology
IEC 80000-13:2008 Quantities and units - Part 13: Information science and technology
IEC 60027-2:2005 Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
AS/NZS ISO 19101.2:2019 Geographic information - Reference model Imagery
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
US$73.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.