ISO 8031:2009
Withdrawn
Withdrawn
View Superseded by
Rubber and plastics hoses and hose assemblies — Determination of electrical resistance and conductivity
Available format(s)
Hardcopy , PDF
Language(s)
English, French, Russian
Published date
10-05-2009
Withdrawn date
04-09-2025
Superseded by
US$96.00
Excluding Tax where applicable
ISO 8031:2009 specifies electrical test methods for rubber and plastics hoses, tubing and hose assemblies to determine the resistance of conductive, antistatic and non-conductive hoses and the electrical continuity or discontinuity between metal end fittings.
| Committee |
ISO/TC 45/SC 1
|
| DevelopmentNote |
Supersedes ISO/DIS 8031. (10/2009)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 8031 : 2009 | Identical |
| NEN EN ISO 8031 : 2009 | Identical |
| NS EN ISO 8031 : 2009 | Identical |
| I.S. EN ISO 8031:2009 | Identical |
| PN EN ISO 8031 : 2010 | Identical |
| SAC GB/T 9572 : 2013 | Identical |
| BS EN ISO 8031:2009 | Identical |
| EN ISO 8031:2009 | Identical |
| NF EN ISO 8031 : 2009 | Identical |
| NEN ISO 8031 : 1993 | Identical |
| UNE-EN ISO 8031:2010 | Identical |
| UNE-EN 28031:1994 | Identical |
| DIN EN 28031:1993-04 | Corresponds |
| DIN EN ISO 8031:2010-04 | Identical |
| EN 28031 : 1993 | Identical |
| BS ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
| 12/30264538 DC : 0 | BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
| 10/30219414 DC : 0 | BS EN 13617-4 - PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| 12/30212874 DC : 0 | BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
| I.S. EN 13765:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| BS ISO 3861 : 1995 AMD 9705 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| BS EN ISO 8331:2016 | Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance |
| BS ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| DIN EN 14593-1:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 1: APPARATUS WITH A FULL FACE MASK - REQUIREMENTS, TESTING, MARKING |
| ISO 11759:1999 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
| ISO 12648:2006 | Graphic technology — Safety requirements for printing press systems |
| BS ISO 19013-2:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines. Specification Gasoline fuels |
| 05/30139053 DC : DRAFT SEP 2005 | ISO 8331 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE |
| PREN 13483 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| ISO 1823:2015 | Rubber hose and hose assemblies for oil suction and discharge service — Specification |
| I.S. EN 13766:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification |
| EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 1: Diesel fuels |
| EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| DIN EN 13483:2013-09 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| BS EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen. Specification |
| BS EN 1765:2004 | Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies |
| BS EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam. Specification |
| DIN EN 1361:1997-08 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| DIN EN ISO 6808:2000-11 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| 07/30170472 DC : DRAFT AUG 2007 | BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| 12/30256960 DC : 0 | BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
| 06/30146125 DC : 0 | EN 12115 - RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| BS 5173-104.1(1991) : 1991 | METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - ELECTRICAL TESTS - MEASUREMENT OF ELECTRICAL RESISTANCE OF HOSES AND HOSE ASSEMBLIES |
| BIS IS 16210 : 2014 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE |
| ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification |
| DD CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| 07/30169625 DC : 0 | BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| 15/30293925 DC : 0 | BS EN ISO 6134 - RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION |
| BS 6847:1987 | Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids |
| SAE ARP6320 | Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines |
| EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
| 16/30330752 DC : 0 | BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| DIN EN 1762:2016-09 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| ISO 8028:2017 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
| EN ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (ISO 1825:2017) |
| 18/30363978 DC : 0 | BS EN 1762 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| BS EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification |
| ISO 1823-2:1997 | Rubber hoses and hose assemblies — Part 2: Ship/dockside discharge — Specification |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 13617-4:2012-05 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| DIN EN 13482:2013-12 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam — Specification |
| BS EN ISO 3861:2008 | Rubber hoses for sand and grit blasting. Specification |
| I.S. EN 13483:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| I.S. EN ISO 3861:2008 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| I.S. EN 13617-4:2012 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| DIN EN 1361:2004-10 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| DIN EN 14593-2:2005-07 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| EN ISO 3861:2008 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| I.S. EN ISO 6134:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
| I.S. EN 13617-2:2012 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| I.S. EN 1360:2013 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| I.S. EN 13482:2013 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| I.S. EN 1765:2016 | RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES |
| I.S. EN ISO 6808:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| I.S. EN 14593-2:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING APPARATUS WITH DEMAND VALVE - PART 2: APPARATUS WITH A HALF MASK AT POSITIVE PRESSURE - REQUIREMENTS, TESTING, MARKING |
| I.S. EN ISO 8330:2014 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY (ISO 8330:2014) |
| BS 4089:1989 | Specification for hoses and hose assemblies for liquefied petroleum gas |
| PREN 13766 : DRAFT 2016 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 11/30246916 DC : DRAFT JULY 2011 | BS EN ISO 8331 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE |
| DIN EN 16820:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| 08/30187544 DC : DRAFT OCT 2008 | BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| DIN EN 1360:2013-09 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 15/30317696 DC : 0 | BS EN ISO 8331 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE |
| 15/30301522 DC : 0 | BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS |
| 14/30293931 DC : 0 | BS ISO 19013-2 - RUBBER HOSES AND TUBING FOR FUEL CIRCUITS FOR INTERNAL COMBUSTION ENGINES - SPECIFICATION - PART 2: GASOLINE FUELS |
| ISO 27126:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals — Specification |
| 16/30334966 DC : 0 | BS EN ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies Dimensions and requirements |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| 14/30293928 DC : 0 | BS ISO 13775-1 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 1: NON-FUEL APPLICATIONS |
| BS 5173-104.2(1991) : LATEST | METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - ELECTRICAL TESTS - MEASUREMENT OF ELECTRICAL CONTINUITY AND DISCONTINUITY OF HOSES AND HOSE ASSEMBLIES |
| 12/30238564 DC : 0 | BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION |
| BS EN ISO 1825:2017 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification |
| ISO 17165-1:2007 | Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements |
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies — Guide for use by purchasers, assemblers, installers and operating personnel |
| ISO 12649:2004 | Graphic technology — Safety requirements for binding and finishing systems and equipment |
| I.S. EN 16643:2016 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED LUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR IQUID AND GASEOUS CHEMICALS - SPECIFICATION |
| I.S. EN 60079-32-2:2015 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| ISO 1823-1:1997 | Rubber hoses and hose assemblies — Part 1: On-shore oil suction and discharge — Specification |
| ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications |
| I.S. EN 14594:2005 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING DEVICES - REQUIREMENTS, TESTING AND MARKING |
| DIN EN 13617-2:2012-05 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| DIN EN ISO 6808:2014-10 | PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION (ISO 6808:2014) |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN ISO 3861:2010-04 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| BS EN 13617-4:2012 | Petrol filling stations Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| BS EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies. Vocabulary |
| EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
| EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| BS EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining |
| BS ISO 8331 : 2007 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE |
| I.S. EN ISO 8331:2016 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - GUIDELINES FOR SELECTION, STORAGE, USE AND MAINTENANCE (ISO 8331:2016) |
| DIN EN 14594:2005-07 | RESPIRATORY PROTECTIVE DEVICES - CONTINUOUS FLOW COMPRESSED AIR LINE BREATHING APPARATUS - REQUIREMENTS, TESTING, MARKING |
| I.S. EN 1361:2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| BS ISO 27126:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification |
| 08/30188437 DC : 0 | BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 11/30250273 DC : 0 | BS EN 13483 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 10/30219408 DC : 0 | BS EN 13617-2 - PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| 13/30227963 DC : 0 | BS ISO 1823 - RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE - SPECIFICATION |
| 12/30264535 DC : 0 | BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| BS EN 14594:2005 | Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking |
| 08/30183539 DC : DRAFT JUNE 2008 | BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| BS ISO 1823:2015 | Rubber hose and hose assemblies for oil suction and discharge service. Specification |
| 13/30284248 DC : 0 | BS EN 16643 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - NON-BONDED FLUOROPLASTIC LINED (E.G. PTFE) HOSES AND HOSE ASSEMBLIES FOR LIQUID AND GASEOUS CHEMICALS - SPECIFICATION |
| BS ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Non-fuel applications |
| 03/300797 DC : DRAFT JAN 2003 | EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
| PREN 13617-2 : DRAFT 2010 | PETROL FILLING STATIONS - PART 2: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SAFE BREAKS FOR USE ON METERING PUMPS AND DISPENSERS |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use — Part 2: Petroleum-based-fuel applications |
| BS EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
| PREN 13482 : DRAFT 2012 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| EN 14594:2018 | Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking |
| DIN EN 13765:2015-05 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification |
| PREN 1762 : DRAFT 2018 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| ISO 19013-2:2016 | Rubber hoses and tubing for fuel circuits for internal combustion engines — Specification — Part 2: Gasoline fuels |
| I.S. CEN TS 14421:2006 | HOSE TAIL AND FERRULE FOR CRIMPING AND SWAGING |
| I.S. EN 1762:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| ISO 27127:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas — Specification |
| I.S. EN ISO 1825:2017 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION (ISO 1825:2017) |
| BS EN 14593-1:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a full mask. Requirements, testing, marking |
| BS EN 13765 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| DIN EN ISO 6134:2015-10 (Draft) | RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
| BS EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling. Specification |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
| ISO 3861:2005 | Rubber hoses for sand and grit blasting — Specification |
| ISO 8331:2016 | Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies — Vocabulary |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process — Part 2: Residential applications |
| BS EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification |
| BS EN 14593-2:2005 | Respiratory protective devices. Compressed air line breathing apparatus with demand valve Apparatus with a half mask at positive pressure. Requirements, testing, marking |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| EN 16820:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| EN 16643:2016 | Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
| EN 28028 : 1993 | RUBBER AND/OR PLASTICS HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| EN 1765:2016 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| EN ISO 8331:2016 | Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016) |
| EN 14593-2:2005 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 2: Apparatus with a half mask at positive pressure - Requirements, testing, marking |
| EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| 15/30315105 DC : 0 | BS EN 16820 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - ELASTOMERIC HOSES WITH OR WITHOUT LINER |
| PREN 13617-4 : DRAFT 2010 | PETROL FILLING STATIONS - PART 4: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF SWIVELS FOR USE ON METERING PUMPS AND DISPENSERS |
| I.S. EN 12419:1999 | RESPIRATORY PROTECTIVE DEVICES - LIGHT DUTY CONSTRUCTION COMPRESSED AIR LINE BREATHING APPARATUS INCORPORATING A FULL FACE MASK, HALF MASK OR QUARTER MASK - REQUIREMENTS, TESTING MARKING |
| I.S. EN 14593-1:2005 | RESPIRATORY PROTECTIVE DEVICES - COMPRESSED AIR LINE BREATHING DEVICES WITH DEMAND VALVE - PART 1: DEVICES WITH A FULL FACE MASK - REQUIREMENTS, TESTING AND MARKING |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| PREN 1360 : DRAFT 2011 | RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 13/30275849 DC : 0 | BS ISO 5772 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 15/30317642 DC : 0 | BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| BS ISO 27127:2014 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
| ISO 2928:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) — Specification |
| 11/30250270 DC : 0 | BS EN 1360 - RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION |
| 16/30302789 DC : DRAFT APR 2016 | BS ISO 19718 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE- REINFORCED, FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOL APPLICATIONS - SPECIFICATION |
| BIS IS/ISO 12643-1 : 2009 | GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 11/30240212 DC : 0 | BS EN ISO 8330 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - VOCABULARY |
| 15/30317663 DC : 0 | BS ISO 11759 - RUBBER HOSES AND HOSE ASSEMBLIES FOR DISPENSING LIQUEFIED PETROLEUM GASES (LPGS) - SPECIFICATION |
| MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
| BS ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications |
| BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
| BS ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck. Specification |
| I.S. EN 16820:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - BONDED ELASTOMERIC HOSES WITH OR WITHOUT A LINING |
| DIN EN 13766:2010-11 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| I.S. EN ISO 8028:2018 | RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
| ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification |
| EN 14593-1:2018 | Respiratory protective devices - Compressed air line breathing devices with demand valve - Part 1: Devices with a full face mask - Requirements, testing and marking |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| BS EN 13766:2010 | Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process — Part 1: Industrial and commercial applications |
| BS EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification |
| BS EN 13617-2:2012 | Petrol filling stations Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| BS EN ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids. Specification |
| BS EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| CEN/TS 14421:2006 | Hose tail and ferrule for crimping and swaging |
| DIN EN ISO 6134:2006-02 | RUBBER HOSES AND HOSE ASSEMBLIES FOR SATURATED STEAM - SPECIFICATION (ISO 6134:2017) |
| DIN EN 1762:2004-07 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS, LPG (LIQUID OR GASEOUS PHASE), AND NATURAL GAS UP TO 25 BAR (2,5 MPA) - SPECIFICATION |
| EN 13482:2013 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| DIN EN ISO 8330:2015-04 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| UNE-EN 13482:2014 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 16643:2017 | Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
| UNE-EN 16820:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Bonded elastomeric hoses with or without a lining |
| UNE-EN 60079-32-2:2016 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| UNE-EN ISO 8330:2014 | Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 13617-4:2012 | Petrol filling stations - Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers |
| UNE-EN 1765:2017 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| UNE-EN 13617-2:2012 | Petrol filling stations - Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers |
| UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| UNE-EN ISO 8331:2017 | Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2016) |
| UNE-EN 1762:2017 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| UNE-EN ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) |
| UNE-EN 13483:2013 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| UNE-EN 1360:2013 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| UNE-EN 13766:2011 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| CEI CLC/TR 60079-32-1 : 2016 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| UNE-EN 13765:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| UNE-EN ISO 6808:2015 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) |
| ISO 23529:2016 | Rubber — General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies — Vocabulary |
| ISO 2878:2017 | Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.