ISO 9705:1993
Withdrawn
Withdrawn
View Superseded by
Fire tests — Full-scale room test for surface products
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
06-17-1993
Withdrawn date
11-02-2025
Superseded by
US$96.00
Excluding Tax where applicable
Specifies a test method that simulates a fire that under well ventilated conditions starts in a corner of a small room with a single open doorway. The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. It is especially suitable for products that for some reason cannot be tested in a small laboratory scale, e.g. thermoplastic materials, the effect of an insulating substrate, joints, surfaces with great irregularity.
| Committee |
ISO/TC 92/SC 1
|
| DevelopmentNote |
Also numbered as BS 476-33(1993). (07/2005)
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| AS ISO 9705-2003 | Identical |
| PN ISO 9705 : 1999 | Identical |
| 14/30300270 DC : 0 | BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS |
| BS ISO 24678-6:2016 | Fire safety engineering. Requirements governing algebraic formulae Flashover related phenomena |
| 05/30090262 DC : DRAFT MAY 2005 | ISO 5658-2 - REACTION TO FIRE TESTS - PART 2: SPREAD OF FLAME |
| ISO 16405:2015 | Room corner and open calorimeter — Guidance on sampling and measurement of effluent gas production using FTIR technique |
| CEI UNI EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS |
| BS ISO/TR 14696:1999 | Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL) |
| 05/30136503 DC : 0 | PREN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| 06/30151267 DC : 0 | BS ISO CD 10840 - PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS |
| BS ISO 11925-3:1997 | Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Multi-source test |
| PREN 14309 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| 16/30336421 DC : 0 | BS EN 81-58 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST |
| MIL-PRF-32489 Base Document:2014 | Pillow, Flame Resistant, Shipboard (No S/S Document) |
| 12/30255984 DC : 0 | BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY |
| DD ISO/TS 14934-4:2007 | Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests |
| ISO 24473:2008 | Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW |
| DIN EN 16069:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| ISO 16733-1:2015 | Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios |
| ISO 13785-2:2002 | Reaction-to-fire tests for façades — Part 2: Large-scale test |
| BS EN 45545-2 : 2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| I.S. EN 13501-1:2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
| ISO/TR 5660-3:2003 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
| NFPA 555 : 2017 | METHODS FOR EVALUATING POTENTIAL FOR ROOM FLASHOVER |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| 03/318326 DC : DRAFT NOV 2003 | |
| EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| BS 6203:2003 | Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications |
| 06/30116005 DC : DRAFT MAY 2006 | ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS |
| 04/19990095 DC : 0 | BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| BS ISO TR 9705-2:2001 | Reaction to fire tests. Full scale room tests for surface products Technical background and guidance |
| DIN EN ISO 25762:2012-04 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| 12/30260441 DC : 0 | BS ISO 14886 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - STRUCTURAL FIRE PROTECTION FOR FRP YACHTS |
| 07/30147204 DC : 0 | BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS |
| ISO 13784-2:2002 | Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms |
| ISO 13785-1:2002 | Reaction-to-fire tests for façades — Part 1: Intermediate-scale test |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| BS ISO 16733-1:2015 | Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios |
| 06/30117323 DC : 0 | ISO 20632 - ROOM TEST FOR PIPE INSULATION |
| ISO/TR 13387-4:1999 | Fire safety engineering — Part 4: Initiation and development of fire and generation of fire effluents |
| 00/121556 DC : DRAFT APR 2000 | BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
| BS ISO TR 11925-1:1999 | Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability |
| DIN EN 45545-2:2016-02 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| AFAP-1 : 2010 | NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS |
| DIN EN 14309:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| I.S. EN 45545-2:2013 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
| ISO 5658-2:2006 | Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration |
| ASTM E 2102 : 2017 : REDLINE | Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater |
| NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
| PD IEC/TR 62222:2012 | Fire performance of communication cables installed in buildings |
| BS EN ISO 15791-1:2013 | Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| I.S. EN ISO 15791-1:2013 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
| BS 476-10:2009 | Fire tests on building materials and structures Guide to the principles, selection, role and application of fire testing and their outputs |
| BS ISO/TR 14697:1997 | Fire tests. Guidance on the choice of substrates for building products |
| BS ISO TR 5658-1:1997 | Reaction to fire tests. Spread of flame Guidance on flame spread |
| ASTM E 2280 : 2017 : REDLINE | Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities |
| ISO/TS 16733:2006 | Fire safety engineering — Selection of design fire scenarios and design fires |
| BS ISO/TR 11696-2:1999 | Uses of reaction to fire test results Fire hazard assessment of construction products |
| 03/115041 DC : DRAFT SEP 2003 | ISO/DIS 17431 - FIRE TEST - REDUCED-SCALE MODEL BOX TEST |
| BS ISO/TR 11696-1:1999 | Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products |
| I.S. EN 50399:2011 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
| BS ISO 14934-4:2014 | Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests |
| I.S. EN 14309:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| I.S. EN 60695-8-2:2017 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| BS 7904:1998 | Guide to smoke measurement units. Their basis and use in smoke opacity test methods |
| BS ISO 16405:2015 | Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique |
| ISO/TR 11925-1:1999 | Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 1: Guidance on ignitability |
| BS ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
| ISO 20632:2008 | Reaction-to-fire tests — Small room test for pipe insulation products or systems |
| BS EN 14309:2015 | Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification |
| BS ISO 5658-2 : 2006 | REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION |
| BS EN 50399:2011 | Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results |
| ISO/TS 14934-4:2007 | Fire tests — Calibration of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests |
| FM 4880 : 2017 | EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS |
| ASTM E 1623 : 2016 : REDLINE | Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL) |
| ASTM E 1822 : 2017 : REDLINE | Standard Test Method for Fire Testing of Stacked Chairs |
| PREN 81-58 : DRAFT 2016 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST |
| ASTM F 1870 : 2016 : REDLINE | Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| ISO/TR 10840:1993 | Plastics — Burning behaviour — Guidance for development and use of fire tests |
| ISO 14934-4:2014 | Fire tests — Calibration and use of heat flux meters — Part 4: Guidance on the use of heat flux meters in fire tests |
| ISO/TS 5660-3:2012 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
| ISO 12949:2011 | Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets |
| BS EN 13501-1 : 2007 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| IEC TR 60695-8-2:2008 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| ASTM E 603 : 2017 : REDLINE | Standard Guide for Room Fire Experiments |
| EN 13501-1:2007+A1:2009 | Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests |
| EN ISO 15791-1:2013 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| ISO/TR 14696:1999 | Reaction to fire tests — Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL) |
| 15/30315084 DC : DRAFT MAY 2015 | BS EN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| 12/30255590 DC : 0 | BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES |
| BS EN 16069 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| BS ISO 25762 : 2009 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES |
| BS ISO 5658-4:2001 | Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| BS ISO/TR 13387-4:1999 | Fire safety engineering Initiation and development of fire and generation of fire effluents |
| ASTM E 2067 : 2015 : REDLINE | Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests |
| BS DD246(1999) : 1999 | RECOMMENDATIONS FOR THE USE OF THE CONE CALORIMETER |
| FM 4924 : 2013 | PIPE AND DUCT INSULATION |
| 08/30192184 DC : 0 | ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY |
| 10/30207740 DC : 0 | BS ISO 12949 - STANDARD TEST METHOD FOR MEASURING THE HEAT RELEASE RATE OF LOW FLAMMABILITY MATTRESSES AND MATTRESS SET |
| ISO/TR 17252:2008 | Fire tests — Applicability of reaction to fire tests to fire modelling and fire safety engineering |
| ASTM E 2257 : 2017 : REDLINE | Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies |
| ISO/TS 17431:2006 | Fire tests— Reduced-scale model box test |
| 08/30169534 DC : DRAFT APR 2008 | BS EN 13163 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| PD ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace |
| I.S. EN 16069:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| 03/308231 DC : 0 | EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS |
| DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| PD ISO/TR 16576:2017 | Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria |
| NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
| BS ISO 15791-1 : 2002 AMD 15256 | PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
| DD ISO/TS 5658-1:2006 | Reaction to fire tests. Spread of flame Guidance on flame spread |
| ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
| ISO 14886:2014 | Ships and marine technology — Large yachts — Structural fire protection for FRP yachts |
| I.S. EN ISO 25762:2012 | PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009) |
| ISO 29903:2012 | Guidance for comparison of toxic gas data between different physical fire models and scales |
| ISO 13784-1:2014 | Reaction to fire test for sandwich panel building systems — Part 1: Small room test |
| ISO 14696:2009 | Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) |
| ISO/TR 11696-2:1999 | Uses of reaction to fire test results — Part 2: Fire hazard assessment of construction products |
| BS EN ISO 10093:1999 | Plastics. Fire tests. Standard ignition sources |
| BS EN 60695-8-2:2017 | Fire hazard testing Heat release. Summary and relevance of test methods |
| 09/30193524 DC : 0 | BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY |
| ISO 10093:1998 | Plastics — Fire tests — Standard ignition sources |
| IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
| ISO 15791-1:2014 | Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 1: General guidance |
| ISO 25762:2009 | Plastics — Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| EN ISO 10093:1998 | Plastics - Fire tests - Standard ignition sources (ISO 10093:1998) |
| EN 16069:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
| EN 14309:2015 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| EN ISO 25762:2012 | Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009) |
| ISO 3008-2:2017 | Fire-resistance tests — Part 2: Lift landing door assemblies |
| BS EN ISO 25762:2012 | Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites |
| 13/30292037 DC : 0 | BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS |
| 16/30331280 DC | BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies |
| 06/30133753 DC : DRAFT MAY 2006 | ISO 24473 - FIRE TESTS - OPEN CALORIMETRY - MEASUREMENT OF THE RATE OF PRODUCTION OF HEAT AND COMBUSTION PRODUCTS FOR FIRES OF UP TO 20MW |
| 12/30211334 DC : 0 | BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO/DIS 15791-1:2012) |
| PD ISO/TS 5660-3:2012 | Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement |
| MIL-DTL-24688 Revision A:2011 | Insulation, Thermal and Acoustic Absorptive, Cellular Polyimide Foam |
| BS ISO 14886:2014 | Ships and marine technology. Large yachts. Structural fire protection for FRP yachts |
| BS ISO 14697:2007 | Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products |
| PD 7974-1:2003 | Application of fire safety engineering principles to the design of buildings Initiation and development of fire within the enclosure of origin (Sub-system 1) |
| IEC 60695-1-12:2015 | Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering |
| ISO 24678-6:2016 | Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phenomena |
| ISO/TR 16576:2017 | Fire safety engineering — Examples of fire safety objectives, functional requirements and safety criteria |
| ISO/TS 19700:2016 | Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
| ISO/TS 5658-1:2006 | Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
| ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
| ISO 29904:2013 | Fire chemistry — Generation and measurement of aerosols |
| DIN EN ISO 15791-1:2014-05 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| 13/30277762 DC : 0 | BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| PD IEC/TR 60695-8-2:2008 | Fire hazard testing Heat release. Summary and relevance of test methods |
| EN 50399 : 2011 AMD 1 2016 | COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS |
| UNE-EN 14309:2017 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| UNE-EN 45545-2:2013 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components |
| UNE-EN 16069:2013 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
| UNE-EN 60695-8-2:2017 | Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods |
| UNE-EN 13501-1:2007 | Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests |
| UNE-ISO 16733-1:2017 | Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios |
| CEI 89-28 : 2008 | FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS |
| UNE-EN ISO 15791-1:2014 | Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
| UNE-EN 50399:2012 | Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results |
| ISO 3261:1975 | Fire tests — Vocabulary |
Summarise
US$96.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.