MIL-PRF-24667 Revision C:2008
Current
The latest, up-to-date edition.
Coating System, Nonskid, for Roll or Spray Application
05-22-2008
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies non-skid systems, coatings, and coverings for application to weather decks, flight decks, and hangar decks of air capable amphibious aviation and aviation ships.
| DevelopmentNote |
Supersedes DOD C 24667. (10/2002) Supersedes MIL D 23003 (A) and MIL D 24483 (A). (08/2004) Supersedes MIL PRF 17951 (E). (06/2008)
|
| DocumentType |
Standard
|
| Pages |
84
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers nonskid systems, coatings, and coverings for application to weather
decks, flight decks, and hangar decks of aircraft carriers, surface combatants, and amphibious,
auxiliary, and sealift ships, and submarines. Coatings are applied to steel, aluminum, and special
hull treatment surfaces by spraying, rolling, or order application method as designated by the manufacturer of the nonskid systems.
| MIL-PRF-32177 Revision A:2012 | Cleaning Compound, Nonskid |
| MIL-STD-1623 Revision E:2006 | Fire Performance Requirements and Approved Specifications for Interior Finish Materials and Furnishings (Naval Shipboard Use) |
| MIL-DTL-32525 Base Document:2016 | Magazine, Portable (ShipBoard) |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| NASA STD 5008A : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| MIL-DTL-17902 Revision G:2013 | Hose Assembly, Synthetic Rubber, withEnd Fitting,for Refueling Aircraft |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| SAE AMS1424M | Deicing/Anti-Icing Fluid, Aircraft SAE Type 1 |
| CFR 40(PTS300-399) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| ASTM G 8 : 1996 | Standard Test Methods for Cathodic Disbonding of Pipeline Coatings |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| MIL-D-16791 Revision G:1990 | Detergents, General Purpose (Liquid, Nonionic) |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| ASTM F 137 : 2008 | Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| MIL-STD-1623 Revision E:2006 | Fire Performance Requirements and Approved Specifications for Interior Finish Materials and Furnishings (Naval Shipboard Use) |
| ANSI B74.12 : 2012 | SPECIFICATION FOR THE SIZE OF ABRASIVE GRAIN - GRINDING WHEELS, POLISHING AND GENERAL INDUSTRIAL USES |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| FED-STD-141 Revision D:2001 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing |
| ASTM D 1895 : 2017 : REDLINE | Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.