MIL-PRF-27401 Revision G:2013
Current
The latest, up-to-date edition.
Propellant Pressurizing Agent, Nitrogen
English
08-07-2013
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for three grades and two types of nitrogen.
| DevelopmentNote |
Supersedes MIL P 27401 (C). (05/2000)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for three grades and two types of nitrogen.
| MIL-PRF-27404 Revision D:2012 | Propellant, Monomethylhydrazine |
| NASA RPTSTD 8070 0001 : 2010 CHANGE 2 2013 | SURFACE CLEANLINESS STANDARD OF FLUID SYSTEMS FOR ROCKET ENGINE TEST FACILITIES OF THE NASA ROCKET PROPULSION TEST PROGRAM |
| MIL-PRF-87930 Revision B:2013 | Propellant, Hydrazine - Water (70 % Hydrazine - 30 % Water) |
| NASA MSFC SPEC 3686 : A2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| MIL-PRF-32207 Base Document:2006 | Propellant, Methane |
| SAE AMS2774E | Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts |
| MIL-PRF-26536 Revision G:2017 | Propellant, Hydrazine |
| MIL-PRF-26539 Revision G:2017 | Propellants, Dinitrogen Tetroxide |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| IEC 62435-4:2018 | Electronic components - Long-term storage of electronic semiconductor devices - Part 4: Storage |
| SAE ARP4378C | Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged |
| MIL-PRF-16005 Revision F:2003 | Propellant, Hydrogen Peroxide |
| NASA MSFC PROC 3687 : 2015 | MATERIAL SPECIFICATION FOR POLYURETHANE FOAM - SPRAYABLE |
| MIL-PRF-7254 Revision H:2015 | Propellant, Nitric Acid |
| MIL-STD-1622 Revision B:1999 | Cleaning of Shipboard Compressed Air Systems |
| NASA MSFC SPEC 3709 : 2017 | SPECIFICATION FOR SOLVENT, CLEANING, TRANS-1-CHLORO-3,3,3,-TRIFLUOROPROPENE, SOLSTICE[R] PF |
| IEC 61760-4:2015 | Surface mounting technology - Part 4: Classification, packaging, labelling and handling of moisture sensitive devices |
| EN 61760-4:2015/A1:2018 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES (IEC 61760-4:2015/A1:2018) |
| NASA MSFC SPEC 3679 : 2012 | PROCESS SPECIFICATION - WELDING AEROSPACE HARDWARE |
| NASA STD 5006 : 2015 | GENERAL FUSION WELDING REQUIREMENTS FOR AEROSPACE MATERIALS |
| NASA MSFC SPEC 164 : 2010 | CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR |
| NASA MSFC STD 3535 : 2009 | STANDARD FOR PROPELLANTS AND PRESSURANTS USED FOR TEST AND TEST SUPPORT ACTIVITIES AT SSC AND MSFC |
| SAE AMS2773E | Heat Treatment Cast Nickel Alloy and Cobalt Alloy Parts |
| GEIA STD 0003 : 2006 | LONG TERM STORAGE OF ELECTRONIC DEVICES |
| 12/30261600 DC : DRAFT MAR 2012 | BS EN 61760-4 - CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| BS EN 61760-4 : 2015 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| I.S. EN 61760-4:2015 | SURFACE MOUNTING TECHNOLOGY - PART 4: CLASSIFICATION, PACKAGING, LABELLING AND HANDLING OF MOISTURE SENSITIVE DEVICES |
| ASTM F 307 : 2013 : REDLINE | Standard Practice for Sampling Pressurized Gas for Gas Analysis |
| MIL-STD-101 Revision C:2014 | Color Code for Pipelines and for Compressed Gas Cylinders |
| MIL-STD-1411 Revision B:2010 | Inspection and Maintenance of Compressed Gas Cylinders |
| A-A-58092 Base Document:1997 | Tape, Antiseize, Polytetrafluorethylene |
| CGA G 10.1 : 2016 | COMMODITY SPECIFICATION FOR NITROGEN |
| A-A-59860 Base Document:2010 | Valves, Cylinder, Gas (for Compressed or Liquefied Gases) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.