MIL-STD-1903 Base Document:1988
Withdrawn
Withdrawn
NUTS, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
Available format(s)
PDF
Published date
08-26-1988
Publisher
Withdrawn date
04-03-1995
US$20.00
Excluding Tax where applicable
Specifies configuration, size, materials and protective coatings and finishes of nuts recommended for design engineers' use in weapons systems and equipment.
| DocumentType |
Standard
|
| Pages |
136
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
The purpose of this bookform standard is to provide a commodity type parts document on nuts to aid military equipment designers and engineers in the selection of preferred nuts.
| MIL-HDBK-2193 Base Document:1994 | Hydraulic System Components, Ship (S/S by MIL-STD-2193) |
| MS24680 Revision F:1990 | NUT, PLAIN, CAP, HIGH CROWN UNC-2B AND UNF-2B (S/S BY A-A-55628) |
| MS3186 Revision G:2011 | Connector, Mounting to Connectors, Mounting Nuts, Plain Hexagon |
| MS21054 Revision E:1985 | NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21054) |
| MS17830 Revision E:1998 | NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEG. F, AND 450 DEG. F (NON-METALLIC INSERT), 300 SERIES CORROSION RESISTANT STEEL (S/S NASM17830) |
| MS9362 Revision A:1968 | NUT, PLAIN, HEXAGON, CHECK A-286, SILVER PLATED, MIL-S-8879 (S/S BY SAE-AS9362) |
| MS14182 Revision B:1989 | NUT, SELF-LOCKING, EXTENDED WASHER, ROUND, NICKEL ALLOY 718, 220 KSI FTU, 450 DEGREE F AND 800 DEGREE F, SPLINE DRIVE (S/S BY NASM14182) |
| MS21067 Revision G:1994 | NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21067) |
| MS21074 Revision F:1987 | NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI, FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21074) |
| MS9358 Revision C:1994 | NUT, CASTELLATED, HEXAGON-A-286 (S/S BY SAE-AS9358) |
| MS21043 Revision E:1994 | NUT, SELF-LOCKING, 800 DEG. F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, CORROSION RESISTANT STEEL (S/S BY NASM21043) |
| MS21046 Revision D:1987 | NUT, SELF LOCKING, HEXAGON-REGULAR HEIGHT, 800 DEG. F, 125 KSI FTU (ASG) (S/S BY NASM21046) |
| MS21044 Revision H:1993 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F, 125 KSI FTU AND 60 KSI FTU (S/S BY NASM21044) |
| MIL N 45938/11 : 0 | NUT, PLAIN, CLINCH & NUT, SELF LOCKING, CLINCH (FLOATING 400 DEG.F) |
| MS21084 Revision B:1986 | NUT, SELF LOCKING, STEEL, 220 KSI FTU, 450 DEG. F., FLANGED, MS33787 WRENCHING ELEMENT (NASM21084) |
| MS9100 Revision B:1974 | NUT - HEX, BOSS CONNECTION, CRES (S/S BY SAE-AS91001) |
| MS21073 Revision G:1994 | NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125KSI FTU, 450 DEG. F (S/S BY NASM21073) |
| MS9200 Revision C:1986 | Nut, Plain, Hex, Boss Connection, Aluminum (S/S by SAE-AS92001) |
| MS21086 Revision D:1995 | NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21086) |
| MS21070 Revision F:1987 | NUT, SELF-LOCKING, PLATE, TWO LUG, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21070) |
| MS27128 Revision D:1976 | Nut, Welding-Pilot |
| MS21087 Revision B:1991 | NUT, SELF-LOCKING, PLATE, SIDE BY SIDE REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21087) |
| MS51471 Base Document:1983 | Nut, Plain, Hexagon (JAM), Carbon Steel, UNC-2B (No S/S Document) |
| MS17829 Revision E:1987 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F., (NON METALLIC INSERT) NON-CORROSION-RESISTANT STEEL (S/S BY NASM17829) |
| MS35692 Revision B:1966 | Nut, Slotted, Hexagon, UNC-2B and UNF-2B |
| MS51866 Revision A:1976 | NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F |
| MS 51979 : A | GUN, ANTI TANK, SELF PROPELLED 90 MM, M56 |
| MS21049 Revision F:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG. CSK LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F. (S/S BY NASM21049) |
| MS9359 Revision B:1986 | NUT, CASTELLATED, HEXAGON - A-286, SILVER PLATED (S/S BY SAE-AS9359) |
| MS21059 Revision J:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21059) |
| MS21304 Revision B:1987 | NUT, PLAIN, SQUARE |
| MS17828 Revision J:1989 | NUT, SELF-LOCKING, HEXAGON, REGULAR-HEIGHT, (NON-METALLIC INSERT) 250 DEG. F, NICKEL-COPPER ALLOY (S/S BY NASM17828) |
| MIL-N-45938-10 Base Document:1980 | NUT, PLAIN, CLINCH AND NUT, SELF LOCKING, CLINCH (SELF CLINCHING) ROUND (S/S BY NASM45938/10) |
| MS27130 Revision F:1987 | Nut, Plain, Blind Rivet-Flat and Countersunk Head, Open End (S/S by NAS1329 and NAS1330) |
| MIL-N-45938-6 Revision C:1995 | NUT, SELF-LOCKING, CLINCH, (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 450 DEG. F, OR 800 DEG. F) (S/S BY NASM45938/6) |
| MS9881 Revision B:1982 | Nut, Plain, Hexagon-AMS 6322, Cadmium Plate MIL-S-8879 (S/S by SAE-AS9881) |
| MIL-N-45938-9 Revision A:1985 | NUT, SELF LOCKING, CLINCH (SWAGE CLINCHING, KNURLED SHANK, 250 DEG. F, UNJF-3B) (S/S BY NASM45938/9) |
| MS27151 Revision B:1976 | Nut, Stamped - Standard Type |
| MS9356 Revision F:1994 | NUT, PLAIN, HEXAGON-A-286 (S/S BY SAE-AS9356) |
| MS35426 Revision E:1977 | NUT, PLAIN, WING, UNF-2B |
| MS9361 Revision C:1994 | NUT, PLAIN, HEXAGON, CHECK-A-286 (S/S BY SAE-AS9361) |
| MS51468 Base Document:1983 | NUT, PLAIN, WING, CARBON STEEL, UNC-2B |
| MS21078 Revision G:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21078) |
| MS21081 Revision D:1993 | NUT, SELF-LOCKING, PLATE, CORNER, NON-METTALIC INSERT, STEEL, 125KSI FTU, 250 DEG. F (S/S BY NASM21081) |
| MS51984 Revision F:1980 | NUT, PLAIN, CONE SEAT, HEXAGON: WHEEL MOUNTING, 1/2 INCH (NO S/S DOCUMENT) |
| MS35649 Revision H:1988 | NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B (S/S BY NASM35649) |
| MS14145 Revision C:1994 | NUT, SELF-LOCKING, LIGHTWEIGHT, THIN, CASTELLATED, 450 DEG. F (S/S BY NASM14145) |
| MS16228 Revision A:1968 | NUT, SELF-LOCKING, HEXAGON-THIN, UNC 3B (NON METALLIC INSERT) AUSTENITIC CORROSION RESISTANT STEEL, NONMAGNETIC, 250 DEG. F (S/S BY NASM16228) |
| MS21056 Revision F:1987 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21056) |
| MS20500 Revision G:2012 | Nut, Self Locking, Hexagon, 1200 Degrees F, 125 KSI FTU |
| MIL-N-45938-2 Revision A:1987 | NUT, PLAIN, CLINCHCVAND NUT, SELF LOCKING, CLINCH (HEXAGON HEAD AND SHANK, SWAGE CLINCH) (S/S BY NASM45938/2) |
| MS21053 Revision D:1978 | NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK LOW HEIGHT, ALLOY STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21053) |
| MS21057 Revision G:1994 | NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT, ALLOY STEEL, 125 KSI FTU, 450 DEG. F. (S/S BY NASM21057) |
| MS21061 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21061) |
| MS21077 Revision H:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21077) |
| MIL-N-45938-4 Revision A:1987 | NUT, PLAIN, CLINCH (SELF-CLINCHING, FLUSH) (S/S BY NASM45938/4) |
| MS9360 Revision B:1986 | NUT, PLAIN, HEX-DRILLED - A-286, SILVER PLATED (S/S BY SAE-AS9360) |
| MS9099 Revision C:1993 | NUT - HEX, BOSS CONNECTION, ALUMINUM (S/S BY SAE-AS90991) |
| AN315 Revision 10:1972 | NUT, PLAIN, AIRFRAME (S/S BY NASM315) |
| MS51970 Revision A:1974 | NUT, PLAIN, HEXAGON-BRASS, BLACK CHEMICAL FINISH, UNF-2B |
| MS21072 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21072) |
| MS51922 Revision E:1976 | NUT, SELF-LOCKING, HEXAGON-PREVAILING TORQUE, GENERAL PURPOSE, 250 DEG. F, UNC-2B AND UNF-2B (S/S BY MIL-DTL-45913) |
| MIL-N-45938-3 Revision B:1988 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, 450 DEG. F. AND 600 DEG. F.) (S/S BY NASM45938/3) |
| MS9363 Revision C:1994 | NUT, SLOTTED, HEXAGON-SHEAR, A-286 (S/S BY SAE-AS9363) |
| MIL-N-45938-12 Revision B:1988 | NUT, PLAIN, SPLINE, ROUND (S/S BY NASM45938/12) |
| MS14210 Revision A:1993 | NUT,FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A. R. E), 450 DEG. F, CRES (A-286), 125 KSI FTU, REPLACEABLE NUT ELEMENT (S/S BY NASM14210) |
| MS21079 Revision F:1994 | NUT, SELF-LOCKING, GANG CHANNEL, NON-METALLIC INSERT, 125 KSI FTU, 250 DEG. F (S/S BY NASM21079) |
| MS14164 Revision A:1991 | NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 220 KSI FTU, 450 DEG. F SPLINE, DRIVE (S/S BY NASM14164) |
| MS21080 Revision D:1993 | NUT, SELF-LOCKING, PLATE, ONE LUG, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21080) |
| MS21085 Revision A:1978 | NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F, FLANGED, MS33787 WRENCHING ELEMENT (S/S BY NASM21085) |
| MS21047 Revision F:1994 | NUT, SELF-LOCKING, PLATE, TWO-LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21047) |
| MS51969 Revision C:2011 | Nut, Plain, Hexagon - Brass, Black Chemical Finish, UNC-2B |
| MS16211 Revision A:1966 | NUTS, PLAIN, SQUARE, REGULAR, UNFINISHED, COPPER-SILICON ALLOY, UNC-2B NONMAGNETIC |
| MS90723 Base Document:1963 | Nut, Sheet Spring and J Type |
| MIL-STD-1515 Revision A:1978 | Fastener Systems for Aerospace Applications (S/S by NASM1515) |
| MS21045 Revision L:1994 | NUT, SELF-LOCKING HEXAGON-REGULAR HEIGHT, 450 DEG. F, 125 KSI FTU (S/S BY NASM21045) |
| MS21050 Revision D:1978 | NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG CSK. LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG AND 800 DEG F (S/S BY NASM21050) |
| MIL-N-45938-1 Revision B:1984 | NUT, PLAIN, CLINCH (SELF-CLINCHING, ROUND) (S/S BY NASM45938/1) |
| MS21066 Revision G:1994 | NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21066) |
| MS21051 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21051) |
| MS21224 Revision D:1993 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON, COUNTERBORED, ASSEMBLED WASHER, 250 DEG. F, NON-METALLIC INSERT (FOR SELF-RETAINING BOLTS) (S/S BY NASM21224) |
| MS9882 Base Document:1968 | NUT, PLAIN, HEX - DRILLED, AMS 6322, CADMIUM PLATE MIL-S-8879 (S/S BY SAE-AS9882) |
| MS21062 Revision E:1987 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21062) |
| MS3214 Base Document:1968 | NUT, PLAIN, CLINCH-FLUSH (S/S BY NASM3214) |
| MS21060 Revision F:1987 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21060) |
| MS27952 Revision A:1968 | Nut, Plain-Hexagon, Jam, Left Hand |
| MS24679 Revision E:1990 | NUT, PLAIN, CAP, LOW CROWN, UNC-2B AND UNF-2B (S/S BY A-A-55629) |
| MS35650 Revision G:1985 | NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B (S/S BY NASM35650) |
| MS9201 Revision B:1986 | NUT, PLAIN, HEX, BOSS CONNECTION, CORROSION RESISTANT STEEL (S/S BY SAE-AS9201) |
| MS21064 Revision G:1994 | NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21064) |
| MS9357 Revision B:1986 | NUT, PLAIN, HEXAGON - A-286, SILVER PLATED (S/S BY SAE-AS9357) |
| AN320 Revision 14:1996 | NUT, PLAIN, CASTELLATED, SHEAR (S/S BY NASM320) |
| MS51857 Base Document:1969 | NUT, PUSH-ON, STEEL |
| MS21225 Revision A:1968 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON - 800 DEG. F (S/S BY NASM21225) |
| MS21076 Revision H:1991 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21076) |
| MS21055 Revision G:1994 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21055) |
| MS17826 Revision H:1988 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON 250 DEG. F, THIN NON-METALLIC INSERT |
| MS51858 Revision B:1973 | NUT, PLAIN HEXAGON, PLASTIC NYLON |
| MS33737 Revision B:1988 | NUT, SHEET SPRING, INSTRUMENT MOUNTING (S/S BY NASM33737) |
| MS51972 Revision A:1969 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| MS21052 Revision F:1987 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG AND 800 DEG F (S/S BY NASM21052) |
| MS17825 Revision J:2011 | Nut, Self-Locking, Castellated, Hexagon, 250 Degrees F Non-Metallic Insert |
| MS51469 Base Document:1983 | Nut, Plain, Hexagon (Machine Screw), Carbon Steel, UNC-2B |
| MS21075 Revision H:1995 | Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 KSI FTU, 450 Degree F (S/S BY NASM21075) |
| MS51865 Revision A:1976 | Nut, Self-Locking, Cap-General Purpose, 250 Deg., F |
| MS51473 Base Document:1983 | NUT, PLAIN, HEXAGON, CARBON STEEL, UNF-2B |
| MS21058 Revision D:1978 | NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21058) |
| MS51971 Revision D:2011 | Nut, Plain, Hexagon-Steel, Corrosion Resisting, 300 Series, Passivated, UNC-2B |
| MIL-N-45938-8 Revision A:1985 | NUT, SELF LOCKING, CLINCH (SWAGE CLINCHING, KNURLED SHANK, 250 DEG. F) (S/S BY NASM45938/8) |
| MS21245 Revision D:1988 | NUT, SELF-LOCKING, HEXAGON, THIN, 450 DEGREE F, 80 KSI FTU (S/S BY NASM21245) |
| MS21069 Revision G:1994 | NUT, SELF-LOCKING, PLATE, TWO-LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21069) |
| MIL-N-45938-5 Revision A:1984 | NUT, SELF-LOCKING, CLINCH (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 250 DEG. F) (S/S BY NASM45938/5) |
| MS14200 Revision B:1995 | NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A.R.E.) 450 DEG. F, STEEL, 125 KSI FTU, REPLACEABLE NUT ELEMENT (S/S BY NASM14200) |
| MS16994 Revision F:2011 | Nut, Plain, Knurled |
| AN256 Revision 5:1983 | NUT - SELF LOCKING, PLATE, RIGHT ANGLE, 250 DEG. F (S/S BY NASM256) |
| MS27127 Revision D:1976 | Nut, Welding - Without Pilot |
| MIL-N-45938-7 Revision C:1993 | NUT, PLAIN CLINCH AND NUT, SELF-LOCKING CLINCH (KNURLED COLLAR, MINIATURE, 450 DEG. F) (S/S BY NASM45938/7) |
| MS14156 Base Document:1974 | NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 180 KSI FTU, 450 DEG. F, SPLINE DRIVE (S/S BY NASM14156) |
| MS21071 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21071) |
| MS21068 Revision F:1987 | NUT, SELF-LOCKING, CHANNEL, 100 DEG CSK, FLOATING, LOW HEIGHT, CRES, 125KSI FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21068) |
| MS35425 Revision E:1977 | Nut Plain, Wing, UNC-2B |
| MS21063 Revision H:1994 | NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21063) |
| MS27040 Revision B:1974 | NUT, PLAIN, SQUARE-STEEL, CADMIUM PLATED |
| MS21065 Revision E:1978 | NUT, SELF-LOCKING, CHANNEL, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21065) |
| MS21042 Revision M:1995 | NUT, SELF-LOCKING, 450 DEG. F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, NON-CORROSION RESISTANT STEEL (S/S BY NASM21042) |
| MS21048 Revision F:1987 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (S/S BY NASM21048) |
| MS90724 Base Document:1963 | Nut, Sheet Spring and U Type |
| MS51470 Base Document:1983 | NUT, PLAIN, HEXAGON (MACHINE SCREW), CARBON STEEL, UNF-2B |
| MS14144 Revision C:1994 | NUT, SELF-LOCKING, LIGHTWEIGHT, CASTELLATED, 450 DEG. F (S/S BY NASM14144) |
| MS9364 Revision A:1968 | NUT, SLOTTED, HEXAGON - SHEAR, A-286, SILVER PLATED, MIL-S-8879 (S/S BY SAE-AS9364) |
| MS21083 Revision H:1993 | NUT, SELF-LOCKING, HEXAGON NON-METALLIC INSERT, LOW HEIGHT, 250 DEG. F (S/S BY NASM21083) |
| MS9553 Base Document:1970 | NUT HEX, BOSS CONNECTION, CRES (S/S BY SAE-AS9553) |
| MIL-N-45938-13 Base Document:1984 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, MINIATURE, FLOATING, 450 DEGREE F AND 600 DEGREE F) (S/S BY NASM45938/13) |
| MIL-N-45938-14 Base Document:1984 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, FLOATING, 450 DEG. F 600 DEG. F) (S/S BYNASM45938/14) |
| MS51943 Revision C:1976 | Nut, Self Locking, Hexagon Prevailing Torque, for Critical Installations, 250 DEG. F, UNC-3B and UNF-3B (S/S by MIL-DTL-45913) |
| MS14146 Revision A:1988 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON, C\'BORED, CAPTIVE WASHER, 450 DEG. F |
| MS21082 Revision F:1993 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21082) |
Summarise
US$20.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.