• There are no items in your cart

NFPA 70 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

NATIONAL ELECTRICAL CODE

Superseded date

08-25-2021

Published date

01-01-2017

Introduction
Chapter 1 - General
Chapter 2 - Wiring and Protection
Chapter 3 - Wiring Methods and Materials
Chapter 4 - Equipment for General Use
Chapter 5 - Special Occupancies
Chapter 6 - Special Equipment
Chapter 7 - Special Conditions
Chapter 8 - Communications Systems
Chapter 9 - Tables
Informative Annex A - Product Safety Standards
Informative Annex B - Application Information for
            Ampacity Calculation
Informative Annex C - Conduit and Tubing Fill Tables
            for Conductors and Fixture Wires of the
            Same Size
Informative Annex D - Examples
Informative Annex E - Types of Construction
Informative Annex F - Availability and Reliability for
            Critical Operations Power Systems; and
            Development and Implementation of
            Functional Performance Tests (FPTs)
            for Critical Operations Power Systems
Informative Annex G - Supervisory Control and Data
            Acquisition (SCADA)
Informative Annex H - Administration and
            Enforcement
Informative Annex I - Recommended Tightening
            Torque Tables from UL Standard 486A-B
Informative Annex J - ADA Standards for Accessible
            Design
Index

Includes the installation and removal of electrical conductors, equipment, and raceways; signaling and communications conductors, equipment, and raceways; and optical fiber cables and raceways for the following: (1) Public and private premises, including buildings, structures, mobile homes, recreational vehicles, and floating buildings; (2) Yards, lots, parking lots, carnivals, and industrial substations; (3) Installations of conductors and equipment that connect to the supply of electricity; and (4) Installations used by the electric utility, such as office buildings, warehouses, garages, machine shops, and recreational buildings, that are not an integral part of a generating plant, substation, or control center.

DevelopmentNote
NFPA 70 is also included in NFPA 70 SET. (05/2003) 2008 version is also available in Spanish (See NFPA 70 SPANISH). Also available with NFPA 70E and NFPA 70B. (01/2013) 2017 NEC Spiralbound is also available. (07/2016)
DocumentType
Standard
PublisherName
National Fire Protection Association
Status
Superseded
SupersededBy
Supersedes

NFPA 520 : 2016 SUBTERRANEAN SPACES
IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
API 49 RUSSIAN : 2001 RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE
IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
IEEE 902-1998 IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book)
UFC 4-740-16 : 2005 UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY RECREATION CENTERS
NFPA 495 : 2018 EXPLOSIVE MATERIALS CODE
IEEE C57.94-1982 IEEE Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers
ASHRAE 41.11 : 2014 METHODS FOR POWER MEASUREMENT
API 2003 REDLINE : 2008 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
NFPA 86C : 1999 INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE
MIL-P-52281 Revision B:1978 PROCESSING MACHINE, PHOTOGRAMMETRIC DIAPOSITIVE PLATES
MIL-B-17452 Revision E:1990 BOILERS, STEAM AND HOT WATER, FIRETUBE - SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
AAMI ST65 : 2008 : R2013 PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES
IEEE C37.16-2009 REDLINE IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below)and DC (3200 V and below) Power Circuit Breakers
IEEE 142 : 2007 GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
GR 1398 CORE : ISSUE 1 REV 1 GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE
IEEE 487.3-2014 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Through the Use of Hybrid Facilities
IEEE DRAFT C62.48 : D10 2003 GUIDE ON INTERACTIONS BETWEEN POWER SYSTEM DISTURBANCES AND SURGE-PROTECTIVE DEVICES
MIL-PRF-12571 Revision R:1998 REFRIGERATOR, MECHANICAL, FIELD, PORTABLE WALK-IN, PLUG-IN (150 CUBIC FEET)
API MPM CH4.2 : 2003 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 2: DISPLACEMENT PROVERS
OO-P-2895 Base Document:1997 PLANT, AGGREGATE, SECONDARY, WITH CONE CRUSHER, MOBILE, 75 TON PER HOUR CAPACITY
NFPA 232A : 1995 ARCHIVES AND RECORDS CENTERS
BS EN 60695-1-40:2014 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Insulating liquids
API 54 RUSSIAN : 1999 : R2007 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
TIA 942 : B2017 TELECOMMUNICATIONS INFRASTRUCTURE STANDARD FOR DATA CENTERS
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
FM 3150 : 2003 AUDIBLE NOTIFICATION APPLIANCES FOR AUTOMATIC FIRE ALARM SIGNALING
13/30288591 DC : 0 BS EN 60974-1 - ARC WEDLING EQUIPMENT - PART 1: WELDING POWER SOURCE
AIHA Z9.1 : 2006 VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS
NFPA 481 : 2000 PRODUCTION, PROCESSING, HANDLING, AND STORAGE OF TITANIUM
NFPA 42 : 2002 STORAGE OF PYROXYLIN PLASTIC
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
GGG-V-790 Revision E:1992 VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE
MIL-A-26846 Revision B:1984 AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN
MIL-G-17713 Revision D:1988 GAGES, LIQUID LEVEL MEASURING, TANK
NFPA 32 : 2016 DRYCLEANING FACILITIES
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
SAE J 2293/1 : 2014 ENERGY TRANSFER SYSTEM FOR ELECTRIC VEHICLES - PART 1: FUNCTIONAL REQUIREMENTS AND SYSTEM ARCHITECTURES
API MPM CH4.2 : 2003 : R2011 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 2: DISPLACEMENT PROVERS
10/30227442 DC : 0 BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS
MIL-T-17585 Revision C:1983 THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE
NFPA 8506 : 1998 HEAT RECOVERY STEAM GENERATOR SYSTEMS
IEEE 1268-2005 IEEE Guide for Safety in the Installation of Mobile Substation Equipment
MIL-B-29205 Revision A:1990 BOILERS, FLUIDIZED BED, STEAM AND HOT WATER, PACKAGED TYPE (330 TO 51,500 POUNDS PER HOUR THERMAL OUTPUT CAPACITY)
MIL-T-45305 Revision C:1991 TRUCK. BOOKMOBILE: DIESEL OR GASOLINE ENGINE DRIVEN, 16,000 POUNDS GVW, 4X2, MODIFIED COMMERCIAL
API 500B : 88 ERRATA RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT DRILLING RIGS & PRODUCTION FACILITIES ON LAND & ON MARINE FIXED & MOBILE PLATFORMS
EN 60079-30-1:2017 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
UFC 3-501-01 : 2015 UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING
IEEE 844-2000 IEEE Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels
API 685 : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
ANSI A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
ASTM F 1764 : 1997 : R2012 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ANSI B11.21 : 2006 SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS
API 674 : 2010 : ERR 1 : 2014 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 674 : 2010 : INC : ERR 1 : 2015 : R2016 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 2001 : 2012 FIRE PROTECTION IN REFINERIES
MIL-HDBK-705 Revision C:1987 GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS
ISA 12.27.01 : 2003 REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS
ANSI/AWWA D107-16 ERR 1(CSV) COMPOSITE ELEVATED TANKS FOR WATER STORAGE
18/30368743 DC (published 2018-04) BS EN 60947-6-2. Low-voltage switchgear and controlgear Part 6-2. Multiple function equipment. Control and protective switching devices (or equipment) (CPS)
API 536 : 2017 POST-COMBUSTION NO[X] CONTROL FOR FIRED EQUIPMENT IN GENERAL REFINERY AND PETROCHEMICAL SERVICES
DD IEC/TS 61968-2:2011 Application integration at electric utilities. System interfaces for distribution management Glossary
BS EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements
ASTM C 1015 : 2017 : REDLINE Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
BS ISO 3977-3:2004 Gas turbines. Procurement Design requirements
IEEE C37.16-2009 LOW-VOLTAGE POWER CIRCUIT BREAKERS AND AC POWER CIRCUIT PROTECTORS - PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS
FM 7745 : 2012 HYDROCARBON LEAK DETECTORS
ANSI B11.3 : 2012 SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
KKK-S-2922 Base Document:1997 SEMITRAILER, VAN; COMMERCIAL (FURNITURE, PERSONNEL, REFRIGERATOR, CARGO, AND SIDE CURTAIN) 7 TO 35 TON
AWS BRH:2007 BRAZING HANDBOOK
AAMI TIR15 : 2016 PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION
IEEE 1590-2009 REDLINE IEEE Recommended Practice for the Electrical Protection of Communication Facilities Serving Electric Supply Locations Using Optical Fiber Systems
IEEE DRAFT C37.95 : D6 99 DRAFT GUIDE FOR PROTECTIVE RELAYING OF UTILITY CONSUMER INTERCONNECTIONS
ANSI/ASSE A10.22 : 2007 : R2012 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
ANSI A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
MIL B 0043998 : C BATH UNIT, AUTOMATED, MULTI-HEAD
ICC 2012 INT. PROPERTY MAINT. CODE : 2012 INTERNATIONAL PROPERTY MAINTENANCE CODE
CSA M688:2010 PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY
MIL-H-45193 Revision D:1985 HEATER, GUN TYPE, ELECTRIC
ANSI/ASSE A10.22 : 2007 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
ANSI B11.12 : 2005 : R2010 SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES
API 11P : 1989 SPECIFICATION FOR PACKAGED RECIPROCATING COMPRESSORS FOR OIL AND GAS PRODUCTION SERVICES
FIPS PUB 94 : 0 GUIDELINE ON ELECTRICAL POWER FOR ADP INSTALLATIONS
CSA C22.2 No. 2420 : 2009 : R2014 BELOWGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
ASTM C 852/C852M : 2017 : REDLINE Standard Guide for Design Criteria for Plutonium Gloveboxes
ANSI A10.22 : 2007 : R2012 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
MIL-STD-108 Revision E:1966 DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT
CGA 6.14 : 2015 AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES
CSA M688 : 2010 : R2015 PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
API 74 : 2001 : R2007 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
IEEE C57.147-2008 IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
ANSI Z83.4-2017/CSA 3.7-2017 Non-recirculating direct gas-fired heating and forced ventilation appliances for commercial and industrial application
ANSI Z21.19-2014/CSA 1.4-2014 REFRIGERATORS USING GAS FUEL
ANSI Z21.8:1994 INSTALLATION OF DOMESTIC GAS CONVERSION BURNERS
CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015 METALLIC OUTLET BOXES
ANSI B11.20 : 2004 : R2009 SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS
CSA 12.8 : 2002 : R2013 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
SAE AS 6479 : 2014 SPLICER, FUSION, FIBER OPTIC, AEROSPACE
ANSI Z21.87 : 2007 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
CSA C22.2 No. 41 :2013 GROUNDING AND BONDING EQUIPMENT
ANSI B11.6 : 2001 : R2012 SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
ANSI NGV4.8 :2012 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
NFPA 53 : 2016 MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES
GGG-D-2782 Base Document:1991 DRIVE, POWER, PORTABLE; FOR PIPE AND BOLT THREADING, ELECTRIC (WITH ACCESSORIES)
MIL-A-28890 Base Document:1984 ANTENNA GROUP, OE-207/BR
API 677 : 2006 : R2010 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
SCTE 15 : 2016 SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE
GG-X-635 Revision D:1963 X-RAY APPARATUS SET, RADIOGRAPHIC AND FLUOROSCOPIC, MEDICAL
IEEE DRAFT 1036 : D13A 2006 APPLICATION OF SHUNT POWER CAPACITORS
IEC 60974-6:2015 Arc welding equipment - Part 6: Limited duty equipment
FM 3600 : 2018 ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
NASA STD 8719.10 : 2006 UNDERWATER FACILITY AND NON-OPEN WATER OPERATIONS
API 2T : 2010 : R2015 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
IEEE 1242-1999 IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
IEEE 3001.11-2017 IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems
ANSI Z21.86-2016/CSA 2.32-2016 VENTED GAS-FIRED SPACE HEATING APPLIANCES
CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEEE 3004.8-2016 IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
ANSI Z83.25-2017 (R2021)/CSA 3.19-2017 Direct gas-fired process air heaters
AIHA Z9.6 : 2008 EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING
API 1631 : 2001 INTERIOR LINING AND PERIODIC INSPECTION OF UNDERGROUND STORAGE TANKS
ANSI Z21.86-2016/CSA 2.32-2016 Vented gas-fired space heating appliances
IEC TR 62655:2013 Tutorial and application guide for high-voltage fuses
IEEE DRAFT 1202 : 0 FLAME-PROPAGATION TESTING OF WIRE AND CABLE
SAE J 2954 : 2017 WIRELESS POWER TRANSFER FOR LIGHT-DUTY PLUG-IN/ELECTRIC VEHICLES AND ALIGNMENT METHODOLOGY
NFPA 53M : 1990 FIRE HAZARDS IN OXYGEN-ENRICHED ATMOSPHERES
I.S. EN 60079-30-2:2017 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
ANSI FC 1 : 2012 STATIONARY FUEL CELL POWER SYSTEMS
ANSI E1.42 : 2016 ENTERTAINMENT TECHNOLOGY - DESIGN, INSTALLATION, AND USE OF ORCHESTRA PIT LIFTS
AWS WHC2.12 : 0 WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 12: BRAZING
NFPA 102 : 2016 GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES
S.R. HD 60364-4-42:2011 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS
ANSI B77.2 : 2014 FUNICULARS - SAFETY REQUIREMENTS
API 500A : 4ED 82(R1987) CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS IN PETROLEUM REFINERIES
AWS D1.4/D1.4M : 2011 STRUCTURAL WELDING CODE - REINFORCING STEEL
CSA Z463 : 2013 GUIDELINE ON MAINTENANCE OF ELECTRICAL SYSTEMS
I.S. EN 60445:2017 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
ANSI/CSA HGV 4.8-2012 (R2018) Hydrogen gas vehicle fueling station compressor guidelines
IEEE 3001.8-2013 IEEE Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems
AWS WHB.3.9 : 2007 WELDING PROCESSES - PART 2: WELDING HANDBOOK, 9TH EDITION, VOL. 3
SAE ARD 50102 : 2002 FORCED AIR OR FORCED AIR/FLUID EQUIPMENT FOR REMOVAL OF FROZEN CONTAMINANTS
API 560 : 2016 FIRED HEATERS FOR GENERAL REFINERY SERVICE
ASTM F 1047 : 2017 : REDLINE Standard Specification for Frying and Braising Pans, Tilting Type
CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
AWS C1.1M/C1.1 : 2012 RECOMMENDED PRACTICES FOR RESISTANCE WELDING
IEEE C37.20.2-2015 IEEE Standard for Metal-Clad Switchgear
ANSI/AAMI ST8:2013(R2018) HOSPITAL STEAM STERILIZERS
CSA C22.2 No. 2459 : 2008 : INC : UPD 1 : 2014 : R201300 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
IEEE 13161 : *DUPLICATE RECORD* **DUPLICATE RECORD**
ASTM F 2361 : 2003 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
AAMI ST65:2008(R2018) PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES
AAMI ST24 : 1999 : R2013 AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
C22.2 NO. 126.1-17 Metal cable tray systems (Binational standard with NEMA VE 1-2017)
NFPA 497M : 1991 CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS
IEEE 525-2007 IEEE Guide for the Design and Installation of Cable Systems in Substations
CSA C293.2 : 2017 STANDARD FOR SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - APPLICATION GUIDE FOR DESIGN, INSTALLATION, TESTING, COMMISSIONING, AND MAINTENANCE
UNE-EN 60974-6:2011 Arc welding equipment - Part 6: Limited duty equipment
CSA/ANSI C22.2 NO. 336-17 Particular requirements for rechargeable battery-operated commercial robotic floor treatment machines with traction drives
NSF 245 : 2013 RESIDENTIAL WASTEWATER TREATMENT SYSTEMS - NITROGEN REDUCTION
AWWA D104 : 2017 AUTOMATICALLY CONTROLLED, IMPRESSED-CURRENT CATHODIC PROTECTION FOR THE INTERIOR SUBMERGED SURFACES OF STEEL WATER STORAGE TANKS
NFPA 61B : 1989 PREVENTION OF FIRES AND EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES
NACE SP 01 00 : 2014 CATHODIC PROTECTION TO CONTROL EXTERNAL CORROSION OF CONCRETE PRESSURE PIPELINES AND MORTAR-COATED STEEL PIPELINES FOR WATER OR WASTE WATER SERVICE
ASTM F 2461 : 2016-12 PRACTICE FOR MANUFACTURE, CONSTRUCTION, OPERATION, AND MAINTENANCE OF AQUATIC PLAY EQUIPMENT
ANSI Z4.4 : 2016 SANITATION - IN FIELDS AND TEMPORARY LABOR CAMPS - MINIMUM REQUIREMENTS
IEEE 1578-2007 IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
ISO 3977-3:2004 Gas turbines — Procurement — Part 3: Design requirements
NSF 401 : 2017 DRINKING WATER TREATMENT UNITS - EMERGING COMPOUNDS/INCIDENTAL CONTAMINANTS
IEEE 1584-2002 IEEE Guide for Performing Arc Flash Hazard Calculations
NFPA 25 HANDBOOK : 2011 INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK
AAMI ST41 : 2008 ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS
ESD ADV3.2 : 1995 SELECTION AND ACCEPTANCE OF AIR IONIZERS
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
ASTM B 812 : 1996 : R2013 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ASTM F 2520 : 2005 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
CSA C22.2 No. 153:2009 ELECTRICAL QUICK-CONNECT TERMINALS
ASTM F 1203 : 2016 : REDLINE Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
GR 324 CORE : ISSUE 1 MAINTENANCE TERMINATION UNIT: GENERIC REQUIREMENTS FOR APPLICATION ON SINGLE-PARTY LOOP-START LINES
ASTM F 2699 : 2008 : R2013 Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
TR NWT 000397 : ISSUE 3 ISDN BASIC ACCESS TRANSPORT SYSTEM REQUIREMENTS
C22.2 NO. 355-18 Sealed twist-on connecting devices (Trinational standard with UL 486G and ANCE NMX-J-745)
ASTM F 1764 : 1997 : R2007 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM C 1320 : 2010 : R2016 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
ASTM F 1217 : 2017 : REDLINE Standard Specification for Cooker, Steam
ASTM E 2543 : 2008 : R2014 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
SAE J 2697 : 2017 INVERTER REQUIREMENTS FOR CLASS EIGHT TRUCKS - TRUCK AND BUS
SAE J 2698 : 2014 PRIMARY SINGLE PHASE NOMINAL 120 VAC WIRING DISTRIBUTION ASSEMBLY DESIGN - TRUCK AND BUS
SAE J 2836/3 : 2017 USE CASES FOR PLUG-IN VEHICLE COMMUNICATION AS A DISTRIBUTED ENERGY RESOURCE
ASTM F 2796 : 2009 : R2014 Standard Specification for Hot Food Holding Tables
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
SAE J 2851 : 2015 RECOVERY EQUIPMENT FOR CONTAMINATED R-134A OR R-1234YF REFRIGERANT FROM MOBILE AUTOMOTIVE AIR CONDITIONING SYSTEMS
ASTM F 2361 : 2003 : R2013 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
ASTM F 1916 : 1998 Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008)
ASTM E 2542 : 2008 : R2014 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
ASTM F 1150 : 2016 : REDLINE Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
ASTM C 1217 : 2000 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
ASTM D 6871 : 2017 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
NFPA 804 : 2015 FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 150 : 2016 FIRE AND LIFE SAFETY IN ANIMAL HOUSING FACILITIES
NFPA 12A : 2018 HALON 1301 FIRE EXTINGUISHING SYSTEMS
NFPA 37 : 2018 INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES
NFPA 720 : 2015 INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT
NFPA 805 : 2015 PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS
NFPA 914 : 2015 FIRE PROTECTION OF HISTORIC STRUCTURES
NFPA 99B : 2018 HYPOBARIC FACILITIES
NFPA 318 : 2018 PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES
NFPA 1906 : 2016 WILDLAND FIRE APPARATUS
NFPA 801 : 2014 FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS
NFPA 40 : 2016 STORAGE AND HANDLING OF CELLULOSE NITRATE FILM
NFPA 221 : 2018 HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS
NFPA 214 : 2016 WATER-COOLING TOWERS
NFPA 30A : 2018 MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
NFPA 51 : 2018 DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES
NFPA 225 : 2017 MODEL MANUFACTURED HOME INSTALLATION STANDARD
NFPA 82 : 2014 INCINERATORS AND WASTE AND LINEN HANDLING SYSTEMS AND EQUIPMENT
NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
NFPA 33 : 2018 SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS
NFPA 122 : 2015 FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES
NFPA 407 : 2017 AIRCRAFT FUEL SERVICING
NFPA 51A : 2012 ACETYLENE CYLINDER CHARGING PLANTS
NFPA 505 : 2018 FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS
NFPA 262 : 2015 METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES
NFPA 35 : 2016 MANUFACTURE OF ORGANIC COATINGS
NFPA 96 : 2017 VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS
NFPA 140 : 2018 MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS
NFPA 303 : 2016 FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS
NFPA 79 : 2018 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
NFPA 90B : 2018 INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS
NFPA 307 : 2016 CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES
NFPA 130 : 2017 FIXED GUIDEWAY TRANSIT AND PASSENGER RAIL SYSTEMS
NFPA 1901:2016 AUTOMOTIVE FIRE APPARATUS
NFPA 418 : 2016 HELIPORTS
NFPA 31 : 2016 INSTALLATION OF OIL-BURNING EQUIPMENT
NFPA 1192 : 2018 RECREATIONAL VEHICLES
NFPA 17A : 2017 WET CHEMICAL EXTINGUISHING SYSTEMS
NFPA 502 : 2017 ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS
NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
NFPA 76 : 2016 FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES
NFPA 87 : 2018 FLUID HEATERS
NFPA 54 : 2018 NATIONAL FUEL GAS CODE
NFPA 730 : 2018 GUIDE FOR PREMISES SECURITY
NFPA 415 : 2016 AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS
NFPA 557 : 2016 DETERMINATION OF FIRE LOAD FOR USE IN STRUCTURAL FIRE PROTECTION DESIGN
NFPA 496 : 2017 PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
NFPA 2010 : 2015 FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
NFPA 34 : 2018 DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS
NFPA 850 : 2015 FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS
CAN/CSA-C22.2 NO. 61010-031:17 Safety requirements for electrical equipment for measurement, control and laboratory use Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement (Binational standard with UL 61010-031)
NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
NFPA 17 : 2017 DRY CHEMICAL EXTINGUISHING SYSTEMS
CSA C22.2 No. 62368-1 : 2014 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
NFPA 2001 : 2018 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
NFPA 1221 : 2016 INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY SERVICES COMMUNICATIONS SYSTEMS
NFPA 11 : 2016 LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM
NFPA 550 : 2017 FIRE SAFETY CONCEPTS TREE
NFPA 501A : 2017 FIRE SAFETY CRITERIA FOR MANUFACTURED HOME INSTALLATIONS, SITES, AND COMMUNITIES
NFPA 59 : 2018 UTILITY LP-GAS PLANT CODE
NFPA 92 : 2018 SMOKE CONTROL SYSTEMS
IEEE 1657-2009 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
IEEE C37.23-2003 IEEE Standard for Metal-Enclosed Bus
IEEE DRAFT 1147 : D8 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
IEEE C37.96-2012 IEEE Guide for AC Motor Protection
IEEE 1566-2015 REDLINE IEEE Standard for Performance of Adjustable-Speed AC Drives Rated 375 kW and Larger
IEEE C37.48.1-2002 IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV
CSA C22.2 No. 104 : 2011 : R2015 HUMIDIFIERS
PD IEC/TR 62368-2:2015 Audio/video, information and communication technology equipment Explanatory information related to IEC 62368-1
ANSI Z21.66 : 2015 AUTOMATIC DAMPER DEVICES FOR USE WITH GAS-FIRED APPLIANCES
BS EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
IEC 60695-1-40:2013 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
I.S. EN ISO 10438-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
NFPA 650 : 1998 PNEUMATIC CONVEYING SYSTEMS FOR HANDLING COMBUSTIBLE PARTICULATE SOLIDS
I.S. EN ISO 13705:2012 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE (ISO 13705:2012)
ANSI E1.24 : 2012(R2017) ENTERTAINMENT TECHNOLOGY - DIMENSIONAL REQUIREMENTS FOR STAGE PIN CONNECTORS
CEN/TR 16793:2016 Guide for the selection, application and use of flame arresters
HD 60364-4-42 : 2011 AMD 1 2015 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014)
ICC 2009 INT. RESI.CODE & COMM.-I1 : 2009 2009 INTERNATIONAL RESIDENTIAL CODE & COMMENTARY - VOLUME 2: CHAPTERS 12 TO 44
HD 60364-5-52:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
IEEE 844.2/CSA C293.2-2017 IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and Maintenance
ICC 2015 INT. SOLAR ENERGY PRO. & COMM. : 2015 2015 (ISEP[TM]) INTERNATIONAL SOLAR ENERGY PROVISIONS[TM] COMMENTARY
CSA 2.33 : 2017 VENTED GAS FIREPLACE HEATERS
PIP ELCGL01 : 2013 ELECTRICAL DESIGN CRITERIA
UFC 4-021-01 : Change 1 UNIFIED FACILITIES CRITERIA - DESIGN AND O&M;: MASS NOTIFICATION SYSTEMS
UFC 3-540-08 : 2017 UNIFIED FACILITIES CRITERIA - UTILITY-SCALE RENEWABLE ENERGY SYSTEMS
UFC 4-510-01 : Change 2 UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES
UFC 3-520-05 : Change 1 UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS
ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
ANSI E1.29 : 2009(R2014) PRODUCT SAFETY STANDARD FOR THEATRICAL FOG GENERATORS THAT CREATE AEROSOLS OF WATER, AQUEOUS SOLUTIONS OF GLYCOL OR GLYCERIN, OR AEROSOLS OF HIGHLY REFINED ALKANE MINERAL OIL
UFC 3-430-02FA : Change 1 UNIFIED FACILITIES CRITERIA - CENTRAL STEAM BOILER PLANTS
FC 4-211-03F : 2016 FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY
ASME B30.24 : 2013 Container Cranes (B30.24 - 2013)
MIL-B-44037 Revision A:1986 BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED
MIL-T-37213 Revision A:1976 TIMER, INTERVAL 115 VOLT 60 HZ AC
GG-I-488-1 Base Document:1976 INCUBATOR, BACTERIOLOGICAL, SMALL
NEMA WC 63.2:1996(R2003) Performance Standard for Coaxial Premise Data Communications Cables
ANSI/CSA AMERICA FC 3-2004 (R2017) PORTABLE FUEL CELL POWER SYSTEMS
GG-I-488 Revision C:1957 INCUBATOR, BACTERIOLOGICAL
UFC 3-550-07 : 2017 UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS
MIL-B-18897 Revision F:1990 BOILERS, STEAM AND HOT WATER, WATERTUBE (STRAIGHT BARE AND FINNED TUBE), CAST IRON AND FIREBOX, PACKAGED TYPE (40,000 TO 35,000 BTU/HR THERMAL OUTPUT CAPACITY)
PIP ELSAP01 : 2017 DESIGN AND FABRICATION OF UTILITY TYPE BATTERY CHARGERS
NFPA 58:2024 Liqueed Petroleum Gas Code
ANS 57.7 : 88(R1997) DESIGN CRITERIA FOR AN INDEPENDENT SPENT FUEL STORAGE INSTALLATION (WATER POOL TYPE)
ASME HST 2 : 2014 PERFORMANCE STANDARD FOR HAND CHAIN MANUALLY OPERATED CHAIN HOISTS
ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
MIL-B-23170 Revision A:1978 BOILERS, STEAM, HIGH PRESSURE WATER TUBE, PACKAGED TYPE (5,000 TO 50,000 POUNDS PER HOUR, FIRED BY COAL, OIL, GAS OR COMBINATION OIL/GAS)
FC 4-721-02F : 2015 FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY
MIL-C-29184 Revision B:1991 Cable Assemblies, Power, Electrical, for Portable Panelboards, General Specification for
ASME B30.29 : 2012 SELF-ERECTING TOWER CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS
ASME B30.20 : 2013 Below-the-Hook Lifting Devices (B30.20 - 2013)
MIL-L-970 Revision C:1977 LAMPHOLDERS AND STARTER SOCKETS, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD USE)
UFC 3-520-01 : 2015 UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS
UFC 3-440-01 : V20020614 UNIFIED FACILITIES CRITERIA - FACILITY-SCALE RENEWABLEENERGY SYSTEMS
ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
ASME B30.25 : 2013 SCRAP AND MATERIAL HANDLERS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS
MIL P 29183 : B PANELBOARD, POWER DISTRIBUTION PORTABLE WEATHERPROOF, GENERAL SPECIFICATION FOR
ASHRAE 128 : 2011 METHOD OF RATING PORTABLE AIR CONDITIONERS
MIL-B-18796 Revision F:1984 BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
MIL-G-19826 Revision F:1984 GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED)
OO-L-2880 Base Document:1997 LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR
F-P-2908 Base Document:1997 PUMPING UNIT, CONDENSATE, RETURN, AND BOILER FEED PACKAGE
GG-I-488-2 Base Document:1976 INCUBATOR, BACTERIOLOGICAL, MEDIUM
GG-I-488-3 Base Document:1976 INCUBATOR BACTERIOLOGICAL, LARGE
A-A-52143 Base Document:1994 ICE CREAM CABINETS, MECHANICALLY-REFRIGERATED DISPENSING, MOBILE, SELF-ELEVATING
MIL-P-53065 Base Document:1986 PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD
MIL-W-37045 Base Document:1974 WATER BATH, ELECTRIC, SEROLOGICAL, 6 RACK, 115 VOLT, 50-60 HZ, AC
W-R-550 Revision A:1975 ROD, GROUND (WITH ATTACHMENTS)
UFC 4-150-02 : Change 5 UNIFIED FACILITIES CRITERIA - DOCKSIDE UTILITIES FOR SHIP SERVICE
F-F-320 Revision C:1998 FILTERS, ELECTRONIC AIR CLEANING, IONIZING PLATE TYPE
MIL-STD-1365 Revision C:2010 GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS
TM 5-811-1 : V19950228 ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION
ASME HST 1 : 2012 PERFORMANCE STANDARD FOR ELECTRIC CHAIN HOISTS
UFC 4-826-10 : 2002 UNIFIED FACILITIES CRITERIA - DESIGN: REFRIGERATION SYSTEMS FOR COLD STORAGE
MIL-PRF-32017 Base Document:1997 REFRIGERATION SYSTEM, ADVANCED DESIGN
ASHRAE GUIDELINE 13 : 2014 SPECIFYING BUILDING AUTOMATION SYSTEMS
ASME BTH 1 : 2017 DESIGN OF BELOW-THE-HOOK LIFTING DEVICES
MIL C 38159 : B CONNECTOR, ELECTRIC, RAMP POWER, 480/277 VOLTS, GENERAL SPECIFICATION FOR
MIL-PRF-44466 Revision D:2006 HEATER, WATER AND RATION (HWR)
MIL-B-29172 Revision B:1991 BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN
MIL-DTL-29183 Revision C:2003 PANELBOARDS, POWER DISTRIBUTION, PORTABLE, WEATHERPROOF, GENERAL SPECIFICATION FOR
MIL-A-83477 Revision A:1976 AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN
ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
A-A-59468 Base Document:1999 Ice Making Machine, Cube and Flake (Naval Shipboard)
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
MIL HDBK 1040 : 0 BASIC GUIDELINES FOR CHEMICAL WARFARE HARDENING OF NEW MILITARY FACILITIES
MIL-A-43657 Base Document:1969 ABSORBER, VAPOR, SYNTHETIC SOLVENT DRY CLEANING UNITS
MIL-DTL-53126 Revision A:2012 POWER DISTRIBUTION, ILLUMINATION SYSTEMS, ELECTRICAL, GENERAL SPECIFICATION FOR
UFC 4-133-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - AIR TRAFFIC CONTROL AND AIR OPERATIONS FACILITIES
CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
NNN-O-001191 Base Document:1966 OVEN LABORATORY
UFC 4-141-04 : Change 1 UNIFIED FACILITIES CRITERIA - EMERGENCY OPERATIONS CENTER PLANNING AND DESIGN
A-A-52192 Base Document:1994 DISPENSER, CARBONATED BEVERAGE, MECHANICALLY REFRIGERATED
MIL-PRF-43891 Revision C:1997 REFRIGERATION UNITS, ELECTRIC, 9000 BTU FOR MILITARY VAN CONTAINER, REFRIGERATED, INSULATED
ASHRAE 189.1 : 2014 DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS
MIL-W-44167 Revision B:1992 WASHING MACHINE, LAUNDRY: OPEN END TYPE, TRAILER MOUNTED
MIL-H-82000 Revision C:1990 HEATER, HOT OIL, 1.5, 3 AND 5 MILLION BTU/H OUTPUT, SKID MOUNTED
A-A-52139 Base Document:1993 ICE MAKING MACHINE, CUBE
A-A-52150 Base Document:1994 REFRIGERATOR-FREEZER, EXPLOSION PROOF, NON-FOOD, LABORATORY
MIL M 29212 : B NOTICE 1 MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY
A-A-2001 Base Document:1995 LIGHT SET, GENERAL ILLUMINATION (EMERGENCY OR AUXILIARY)
UFC 3-440-05N : Change 2 UNIFIED FACILITIES CRITERIA - TROPICAL ENGINEERING
CSA FC 3 : 2004 PORTABLE FUEL CELL POWER SYSTEMS
IPC 1331 : 0 VOLUNTARY SAFETY STANDARD FOR ELECTRICALLY HEATED PROCESS EQUIPMENT
F-B-2910 Base Document:1998 BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125, 000,000 BTU/HR THERMAL OUTPUT CAPACITY)
SAE AS 6228 : 2014 SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS
MIL-PRF-32335 Base Document:2010 TRICON REFRIGERATED CONTAINER SYSTEM (TRCS)
UFC 4-420-01 : 2015 UNIFIED FACILITIES CRITERIA - AMMUNITION AND EXPLOSIVES STORAGE MAGAZINES
FC 4-218-01F : 2015 FACILITIES CRITERIA - AIR FORCE CRITERIA FOR PRECISION MEASUREMENT EQUIPMENT LABORATORY DESIGN AND CONSTRUCTION
SSPC-GUIDE 12 : 2016 GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS
ASHRAE 15 USER'S MANUAL : 2002 USER'S MANUAL FOR ANSI/ASHRAE STANDARD 15-2001, SAFETY STANDARD FOR REFRIGERATION SYSTEMS
MIL-DTL-32496 Base Document:2014 GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
MIL-HDBK-1004-6 Base Document:1986 LIGHTNING PROTECTION
A-A-59187 Base Document:1998 RANGE, CONVECTION OVEN, ELECTRIC, MODULAR (NAVAL SHIPBOARD)
MIL-B-28658 Revision E:1991 BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE
MIL-B-43928 Revision A:1987 BROILER, CONVEYORIZED, INFRARED, ELECTRIC
CC-G-2745 Base Document:1984 GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED)
MIL-B-29171 Revision B:1991 BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME
ASME B30.13 : 2017 STORAGE/RETRIEVAL (S/R) MACHINES AND ASSOCIATED EQUIPMENT - SAFETY STANDARD FOR CABLEWAYS, CRANES, HOISTS, HOOKS, JACKS, AND SLINGS
OO-S-256 Revision K:2012 Sewing Machine, Industrial, General Specification for
OO-A-373 Revision D:1998 AIR CONDITIONER, SELF CONTAINED SPACE TYPES, WATER, AIR OR EVAPORATIVE COOLED
MIL-PRF-32109 Base Document:2002 FLOODLIGHT SET, ELECTRIC, PORTABLE
IPC FC 213 : 1984 PERFORMANCE SPECIFICATION FOR FLAT UNDERCARPET TELEPHONE CABLE
NFPA 704 : 2017 STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE
ISA TR12.24.01 : 1998 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
NFPA 434 : 2002 CODE FOR THE STORAGE OF PESTICIDES
API MPM CH7.3 : 2011(R2016) MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS
NFPA 86D : 1999 INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE
FM 3620 : 2018 PURGED AND PRESSURIZED ELECTRICAL EQUIPMENT FOR HAZARDOUS (CLASSIFIED) LOCATIONS
API MPM CH7.4 : 2018 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT
NFPA 1124 : 2017 MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES
PREN ISO 13705 : DRAFT 2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
API 1125 : 1991 OVERFILL CONTROL SYSTEMS FOR TANK BARGES
MIL-DTL-83521-5 Revision A:2018 MAINTENANCE KITS, ELECTRICAL CONNECTORS, CONTACTS AND CONNECTOR AND CABLE ACCESSORIES: MAINTENANCE KIT, GENERAL PURPOSE (AIR/NITROGEN HEAT GUN)
GG-T-35 Revision C:1989 TABLE; DRAWING, TRACING, AND SCRIBING
IEC TS 60695-1-40:2002 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
AIHA Z9.3 : 2007 SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION
ANSI Z83.14 : 1994 GAS FOOD SERVICE EQUIPMENT - COUNTER APPLIANCES (COUNTER OR FLOOR MOUNTED)
ANSI O2.1 : 1983 SAWMILLS - SAFETY REQUIREMENTS FOR
API RP 68 : 1998 RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE
API MPM CH7 : 2001 : INC : ADD 1 : 2011 : R2012 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION
NFPA 1914 : 2002 TESTING FIRE DEPARTMENT AERIAL DEVICES
CSA T530 : 0 COMMERCIAL BUILDING STANDARD FOR TELECOMMUNICATIONS PATHWAYS AND SPACES
MIL-D-12491 Revision E:1989 DEGREASER, SOLVENT, TANK IMMERSION TYPE
17/30298929 DC : DRAFT SEP 2017 BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
AWS C5.2 : 2001 RECOMMENDED PRACTICES FOR PLASMA ARC CUTTING AND GOUGING
NACE RP 01 77 : 0 MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS
ANSI B11.20 : 2004 SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS
BS ISO 13577-3:2016 Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases
PD CEN/TR 16793:2016 Guide for the selection, application and use of flame arresters
NFPA 912 : 1993 FIRE PROTECTION IN PLACES OF WORSHIP
MIL S 4880 : G NOTICE 1 SWEEPER, MAGNET, SELF-PROPELLED
MIL-P-44401 Base Document:1990 PRESS SECTION, MODULAR PRINTING SYSTEM
API MPM CH7 : 2001 : R2007 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION
MIL-B-18797 Revision G:1990 BURNERS, SINGLE: LIGHT OIL, GAS, AND LIGHT OIL-GAS COMBINATION FOR PACKAGED HEATING BOILERS (UP TO 320000 BTU/HR THERMAL OUTPUT CAPACITY)
NFPA 85A : 1987 PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL AND NATURAL GAS FIRED SINGLE BURNER BOILER FURNACES
NSS 1740.12 : 0 SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS
AAMI TIR67 : 2018 PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES
ASTM C 1320 : 2010 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
MIL-B-18966 Revision C:1984 BLOCKING PLANT, CONCRETE
ASCE 25 06 : 2008 EARTHQUAKE ACTUATED AUTOMATIC GAS SHUTOFF DEVICES
NFPA 791 : 2018 RECOMMENDED PRACTICE AND PROCEDURES FOR UNLABELED ELECTRICAL EQUIPMENT EVALUATION
AWS TSS : 1985 THERMAL SPRAYING: PRACTICE, THEORY, AND APPLICATION
NFPA 15 : 2017 WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
MIL-B-16220 Revision F:1988 BOILER, STEAM, LOW PRESSURE, FIRETUBE
IEEE 1187-2013 REDLINE IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications
MIL-A-26624 Revision B:1981 AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN
MIL-C-3925 Revision H:1989 COMPRESSOR, RECIPROCATING AND ROTARY POWER DRIVEN, AIR [PAINT SPRAY TYPE]
F-B-2835 Base Document:1995 BOILER, STEAM, LOW PRESSURE, FIBRETUBE
MIL-PRF-44015 Revision A:1997 REFRIGERATOR-CONTAINER, FIELD, 8 FEET BY 8 FEET BY 10 FEET
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
NFPA 326 : 2015 SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR
AIHA Z9.4 : 2011 ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES
API 677 : 2006 : R2016 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
MIL-PRF-32037 Base Document:1999 BLAST CLEANING ROOM
MIL-T-11776 Revision E:1988 TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA
NFPA 513 : 1998 MOTOR FREIGHT TERMINALS
IEEE 690-2004 IEEE Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations
ASTM F 2092 : 2014 : REDLINE Standard Specification for Convection Oven Gas or Electric
MIL-STD-1542 Revision B:1991
TIA 598 : D2014 ADD 2 2018 OPTICAL FIBER CABLE COLOR CODING
ANSI Z21.8-1994 (R2017) Installation of Domestic Gas Conversion Burners
CSA C22.2 No. 45.2 : 2008 : INC : UPD 1 : 2014 : R201300 ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL
09/19984091 DC : DRAFT JAN 2009 BS EN ISO 19906 - PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
ANSI/ASSP A10.9-2013(R2018) SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
ISA 60079-27 : 2006 FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
MIL-S-8512 Revision D:1974 SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF
ANSI Z49.1 : 2012 SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES
CSA ISO 19906 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
IEEE C57.148-2011 IEEE Standard for Control Cabinets for Power Transformers
IEEE C37.48-2005 IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
MIL-B-45857 Revision C:1985 BORING MACHINE, CAM AND MAIN BEARINGS (STATIONARY)
MIL-W-80235 Revision C:1991 WELDING MACHINES, ELECTRICAL RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE, ALTERNATING CURRENT (AC)
ANSI Z83.25 : 2017 DIRECT GAS-FIRED PROCESS AIR HEATERS
GG-S-1341 Revision A:1975 WASHER-STERILIZER, SURGICAL INSTRUMENT
UFC 3-560-01 : Change 1 UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY
ANSI Z83.20 : 2016 GAS-FIRED TUBULAR AND LOW-INTENSITY INFRARED HEATERS
ANSI/AAMI ST55:2016 TABLE-TOP STEAM STERILIZERS
ISA TR12.13.03 : 2009 GUIDE FOR COMBUSTIBLE GAS DETECTION AS A METHOD OF PROTECTION
NFPA 36 : 2017 SOLVENT EXTRACTION PLANTS
ASTM E 2739 : 2010 Standard Specification for Personnel Decontamination System to be Used During a Chemical Event (Withdrawn 2019)
NASA KSC STD E 0021 : 2002 KSC TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR
MIL-B-12570 Revision D:1977 BAKERY OVEN, TRAILER MOUNTED, M-533
XX-C-2816 Revision A:2016 COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER
AWS C7.2M : 2010 RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND ALLIED PROCESSES
CSA C22.2 No. 2420 : 2009 : INC : UPD 1 : 2012 BELOWGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
ANSI NGV4.8 : 2012 : R2013 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
SAE J 3072 : 2015 INTERCONNECTION REQUIREMENTS FOR ONBOARD, UTILITY-INTERACTIVE INVERTER SYSTEMS
ASTM E 2942 : 2017 : REDLINE Standard Guide for Security of Tank Farm Installations for Compliance with Spill Prevention, Control and Countermeasure Plan (SPCC) Regulations
ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2016 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
MIL-PRF-32278 Revision B:2008 GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE)
FED-STD-794 Revision Y:2005 TRUCKS: MEDIUM COMMERCIAL, 4X2 AND 4X4 9,500 TO 16,000 KG (21,000 TO 35,000 LBS) GVWR
CSA 2.3 : 2016 GAS-FIRED CENTRAL FURNACES
API SPEC 16F : 2017 SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT
MIL-T-28571 Revision G:1991 TRUCK, FIREFIGHTING, STRUCTURAL, 1,OOO GPM, 4 BY 2
MIL-S-52377 Revision D:1990 SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED
NFPA 121 : 2001 FIRE PROTECTION FOR SELF-PROPELLED AND MOBILE SURFACE MINING EQUIPMENT
NFPA 12 : 2018 CARBON DIOXIDE EXTINGUISHING SYSTEMS
ANSI Z21.40.1 : 1996 : R2012 GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES
CSA 1.8 : 2016 GAS FOOD SERVICE EQUIPMENT
CSA C22.2 No. 5 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES
IEEE 1901-2010 IEEE Standard for Broadband over Power Line Networks: Medium Access Control and Physical Layer Specifications
MIL-C-52037 Revision F:1990 COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI
API STD 2015 : 2018 REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS
API 2009 : 2002 : R2007 SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
CSA 1.1 : 2016 HOUSEHOLD COOKING GAS APPLIANCES
NASA KSC STD E 0011 : 2009 ELECTRICAL POWER RECEPTACLES AND PLUGS, STANDARD FOR
CSA 4.9 : 2017 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
ANSI B11.8:2001(R2007) SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
CSA 4.1 : 2017 GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS
CSA/ANSI NGV 4.1-2018 Natural gas vehicle (NGV) dispensing systems
ANSI Z21.10.3-2017/CSA 4.3:2017 GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS
ANSI Z21.5.2-2016/CSA 7.2:2016 GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS
API 610 : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
MIL-B-45022 Revision F:1992 BLAST CLEANING CABINETS
ANSI Z21.5.1-2017/CSA 7.1-2017 Gas clothes dryers, volume I, type 1 clothes dryers
ASTM F 2876 : 2010 Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
ANSI Z21.8 : 1994 : R2012 INSTALLATION OF DOMESTIC GAS CONVERSION BURNERS
IEEE C57.13.3-2014 REDLINE IEEE Guide for Grounding of Instrument Transformer Secondary Circuits and Cases
API 674 : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
CSA C22.2 No. 18.1 : 2013 METALLIC OUTLET BOXES
ANSI Z21.13 : 2017 GAS-FIRED LOW PRESSURE STEAM AND HOT WATER BOILERS
ANSI Z21.92 : 2001 : INC : ADD A : 2005 : R2012 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
ANSI Z21.92 : 2001 : R2012 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS
ANSI Z21.5.1-2017/CSA 7.1-2017 GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
API 553 : 2012 REFINERY VALVES AND ACCESSORIES FOR CONTROL AND SAFETY INSTRUMENTED SYSTEMS
ANSI/ASSE A10.16 : 2009 SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS
IEC TR 61200-52:2013 Electrical installation guide - Part 52: Selection and erection of electrical equipment - Wiring systems
CSA T568.2 : 2005 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
NFPA 224 : 1985 HOMES AND CAMPS IN FOREST AREAS
ASCE 25 97 : 1999 EARTHQUAKE-ACTUATED AUTOMATIC GAS SHUTOFF DEVICES
SAE J 2910 : 2014 Recommended Practice for the Design and Test of Hybrid Electric and Electric Trucks and Buses for Electrical Safety<br>
C22.2 NO. 280-16 Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016)
CSA 6.19-17 Residential carbon monoxide alarming devices
CSA C22.2 No. 2515:2009 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
ANSI Z21.97-2017/CSA 2.41-2017 Outdoor decorative gas appliances
NFPA 72B : 1986 INSTALLATION, MAINTENANCE, AND USE OF AUXILIARY PROTECTIVE SIGNALING SYSTEMS
NFPA 416 : 1993 CONSTRUCTION AND PROTECTION OF AIRPORT TERMINAL BUILDINGS
NFPA 471 : 2002 RESPONDING TO HAZARDOUS MATERIALS INCIDENTS
ANSI/ASSE Z117.1 : 2009 SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES
CSA C22.2 No. 2515 : 2009 : INC : UPD 1 : 2012 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
ANSI B11.0 : 2015 SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
NFPA 16A : 1994 INSTALLATION OF CLOSED HEAD FOAM WATER SPRINKLER SYSTEMS
ANSI E1.58 : 2017 ELECTRICAL SAFETY STANDARD FOR PORTABLE STAGE AND STUDIO EQUIPMENT USED OUTDOORS
NFPA 71 : 1989 INSTALLATION, MAINTENANCE, AND USE OF SIGNALING SYSTEMS FOR CENTRAL STATION SERVICE
NFPA 1072:2017 HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS
ANS 40.35 : 1991 VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE
NFPA 49 : 1994 HAZARDOUS CHEMICALS DATA
NFPA 493 : 1978 INTRINSICALLY SAFE APPARATUS IN DIVISION HAZARDOUS LOCATIONS
NFPA 11A : 1999 MEDIUM- AND HIGH-EXPANSION FOAM SYSTEMS
ANSI Z21.11.3-2016 Gas-fired room heaters, volume III, propane-fired portable emergency use heater systems
NFPA 1125 : 2017 MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS
CSA C22.2 No. 2515 : 2009 : INC : UPD 2 : 2014 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 2 : 2013 HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS
CSA C22.2 No. 18-4 : 2004 : INC : AMD 2 : 2009 HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE
NFPA 231E : 1996 STORAGE OF BALED COTTON
AAMI ST24 : 1999 : R2005 AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
IEEE DRAFT C57.13.3 : D9 2005 GUIDE FOR GROUNDING OF INSTRUMENT TRANSFORMER SECONDARY CIRCUITS AND CASES
IEEE DRAFT 937 : D2 99 DRAFT RECOMMENDED PRACTICE FOR INSTALLATION AND MAINTENANCE OF LEAD-ACID BATTERIES FOR PHOTOVOLTAIC (PV) SYSTEMS
NFPA 501C : 1996 RECREATIONAL VEHICLES
ANSI B11.2 : 2013 SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES
ANSI A10.5 : 2013 SAFETY REQUIREMENTS FOR MATERIAL HOISTS
ANSI A10.7 : 2011 SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS
ANSI B157.1 : 1981 SCALES, WEIGHING DEVICES, AND WEIGHING SYSTEMS, SAFETY REQUIREMENTS FOR,
ASCE/EWRI 56/57 10 : 2010 ASCE/EWRI 56-10 - GUIDELINES FOR THE PHYSICAL SECURITY OF WATER UTILITIES; ASCE/EWRI 57-10 - GUIDELINES FOR THE PHYSICAL SECURITY OF WASTEWATER/STORMWATER UTILITIES
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
NETA ATS : 2017 ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
ANSI Z21.17 : 1998 : INC : ADD A : 2008 : R2014 DOMESTIC GAS CONVERSION BURNERS
SAE J 1773 : 2014 SAE ELECTRIC VEHICLE INDUCTIVELY COUPLED CHARGING
NACE SP 04 08 : 2014 CATHODIC PROTECTION OF REINFORCING STEEL IN BURIED OR SUBMERGED CONCRETE STRUCTURES
IEEE 1661-2007 IEEE Guide for Test and Evaluation of Lead-Acid Batteries Used in Photovoltaic (PV) Hybrid Power Systems
CSA 2.22 : 2016 VENTED DECORATIVE GAS APPLIANCES
BS EN ISO 16924:2018 Natural gas fuelling stations. LNG stations for fuelling vehicles
ASTM E 1344 : 1990 : R1997 : EDT 1 Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities
FM 3265 : 2017 SPARK DETECTION AND EXTINGUISHING SYSTEMS
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 3 : 2016 : R201500 HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS
SAE J 2293 2 : 2014 ENERGY TRANSFER SYSTEM FOR ELECTRIC VEHICLES - PART 2: COMMUNICATION REQUIREMENTS AND NETWORK ARCHITECTURE
ASTM E 1344 : 1990 : R2006 Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009)
IEEE DRAFT C62.92.2 : 1999 DRAFT GUIDE FOR THE APPLICATION OF NEUTRAL GROUNDING IN ELECTRICAL UTILITY SYSTEMS, PART 2 - GROUNDING OF SYNCHRONOUS GENERATOR SYSTEMS
IEEE DRAFT 525 : D15 2006 DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS
UL 1120:3ED 1997-09 Standard for Marine Engine Ignition Systems and Components
IEEE DRAFT C37.123 : D2 FEB 96 DRAFT GUIDE TO SPECIFICATIONS FOR GAS-INSULATED ELECTRIC POWER SUBSTATION EQUIPMENT
ASTM E 580/E580M : 2017 : REDLINE Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
ASTM D 6060 : 2017 : REDLINE Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
API 500 RUSSIAN :1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
API 500 RUSSIAN : 1997 : R2002 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
ASTM F 2202 : 2002 : R2015 Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
NFPA 59A : 2016 PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG)
ANSI Z21.10.3 : 2015 GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
NFPA 301 : 2018 SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS
NFPA 232 : 2017 PROTECTION OF RECORDS
NFPA 90A : 2018 INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS
NFPA 120 : 2015 FIRE PREVENTION AND CONTROL IN COAL MINES
I.S. EN 61800-5-1:2007 ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY
NFPA 58 : 2017 LIQUEFIED PETROLEUM GAS CODE
NFPA 52 : 2016 VEHICULAR NATURAL GAS FUEL SYSTEMS CODE
NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
NFPA 820 : 2016 FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES
NFPA 909 : 2017 PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP
IEEE 3004.5-2014 IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
IEEE C37.13-2015 REDLINE IEEE Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures
BS EN ISO 13709:2003 Centrifugal pumps for petroleum, petrochemical and natural gas industries
PD IEC/TR 62222:2012 Fire performance of communication cables installed in buildings
ISO 19859:2016 Gas turbine applications Requirements for power generation
13/30231511 DC : 0 BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS
ICC IRC Code and Commentary Volume 1 : 2015 IRC® Code and Commentary, Volume 1
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2016 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
CSA C22.2 No. 281.2 : 2012 : INC : UPD 1 : 2015 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
C22.2 NO. 83.1-07 (R2017) Electrical Metallic Tubing - Steel (Tri-National Standard, with UL 797 and NMX-J-536-ANCE-2007)
UL 60947-7-2:4ED 2017-01 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors
C22.2 NO. 4248.1-17 Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE)
ANSI Z21.10.1 : 2017 GAS WATER HEATERS, VOLUME 1, STORAGE WATER HEATERS WITH INPUT RATINGS OF 75,000 BTU PER HOUR OR LESS
CSA C22.2 No. 198.3 : 2005 : R2014 COATED ELECTRICAL SLEEVING
CSA C22.2 No. 281.1:2012 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: GENERAL REQUIREMENTS
CSA C22.2 No. 184.1 : 2015 SOLID-STATE DIMMING CONTROLS
CSA C22.2 No. 198.3 : 2005 : R2010 COATED ELECTRICAL SLEEVING
CSA C22.2 No. 281.1 : 2012 : INC : UPD 2 : 2016 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: GENERAL REQUIREMENTS
UL 486G:1ED 2018-01 Sealed Twist-On Connecting Devices
CSA 2.6 : 2016 GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES
NFPA 101B : 2002 MEANS OF EGRESS FOR BUILDINGS AND STRUCTURES
NFPA 92B : 2009 SMOKE MANAGEMENT SYSTEMS IN MALLS, ATRIA, AND LARGE SPACES
NASA-STD-8719.11B:2020 STANDARD FOR FIRE PROTECTION AND LIFE SAFETY
I.S. EN ISO 10440-1:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
ASHRAE GUIDELINE 6 : 2015 REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS
ASHRAE 15 : 2013 SAFETY STANDARD FOR REFRIGERATION SYSTEMS
ANSI/CSA NGV 5.1-2016 (R2020) Residential fueling appliances
ANSI B11.17 : 2004 : R2015 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
ANSI B11.17 : 2004 : R2009 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
ANSI B11.23 : 2002 : R2012 SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES
ASHRAE GUIDELINE 14 : 2014 MEASUREMENT OF ENERGY, DEMAND, AND WATER SAVINGS
Z462-18 Workplace electrical safety
NFPA 803 : 1998 FIRE PROTECTION FOR LIGHT WATER NUCLEAR POWER PLANTS
NFPA 92A : 2009 SMOKE-CONTROL SYSTEMS UTILIZING BARRIERS AND PRESSURE DIFFERENCES
ISA RP92.04.02-2 : 1996 INSTALLATION, OPERATION, AND MAINTENANCE OF INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES
ANSI B11.1 : 2009 SAFETY REQUIREMENTS FOR MECHANICAL POWER PRESSES
NFPA 230 : 2003 FIRE PROTECTION OF STORAGE
ANSI B11.10 : 2003 : R2009 SAFETY REQUIREMENTS FOR METAL SAWING MACHINES
NFPA 99C : 2005 GAS AND VACUUM SYSTEMS
ANSI Z83.11 : 2016 GAS FOOD SERVICE EQUIPMENT
ISA 60079-7 : 2008 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E"
NFPA 1 : 2021 FIRE CODE
ANSI/IAS U.S. LC 2 : 1996 DIRECT GAS-FIRED CIRCULATING HEATERS FOR AGRICULTURAL ANIMAL CONFINEMENT BUILDINGS
ANSI B11.24 : 2002 : R2012 SAFETY REQUIREMENTS FOR TRANSFER MACHINES
ANSI B11.24 : 2002 : R2007 SAFETY REQUIREMENTS FOR TRANSFER MACHINES
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
CSA NGV 5.1 : 2016 RESIDENTIAL FUELING APPLIANCES
ANSI B11.23 : 2002 : R2007 SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES
ISA 92.04.01-1 : 2007 PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES
ANSI B11.10 : 2003 : R2015 SAFETY REQUIREMENTS FOR METAL SAWING MACHINES
ANSI B11.22 : 2002 : R2012 SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES
CSA C22.2 No. 253 : 2016 MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES
ISA 61241-0 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
ANSI/IAS U.S. LC 2 : 1996 : INC : ADD A : 1998 : R2015 DIRECT GAS-FIRED CIRCULATING HEATERS FOR AGRICULTURAL ANIMAL CONFINEMENT BUILDINGS
ANSI B11.22 : 2002 : R2007 SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES
ISA 12.00.01 : 2002 ELECTRICAL APPARATUS FOR USE IN CLASS 1, ZONE 0, 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS
ANSI/ASSP Z9.10 : 2017 FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES
ANSI/ASSP A10.8 : 2011 SCAFFOLDING SAFETY REQUIREMENTS
ANSI N665 : 1985 FIRE PROTECTION FOR LWR FUEL FABRICATION FACILITIES,
UNI EN ISO 10438-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS
ASME B30.17 : 2015 Cranes and Monorails (With Underhung Trolley or Bridge)
UFC 3-540-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - ENGINE-DRIVEN GENERATOR SYSTEMS FOR PRIME AND STANDBY POWER APPLICATIONS
ASME A112.14.4 : 2001 : R2012 GREASE REMOVAL DEVICES
FC 4-740-02N : 2014 FACILITIES CRITERIA - NAVY AND MARINE CORPS FITNESS CENTERS
UFC 4-211-01 : Change 1 UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS
UFC 3-410-04N : 2004 UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION
UFC 3-410-01 : Change 4 UNIFIED FACILITIES CRITERIA - HEATING, VENTILATING, AND AIR CONDITIONING SYSTEMS
NEMA EW 1-1988 (R1994, R1999, R2004) Electric Arc-Welding Power Sources
NEMA EW 4-2009 GRAPHIC SYMBOLS FOR ARC WELDING AND CUTTING APPARATUS
NEMA SG 10 : 2013 GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V
NEMA HP 100.4 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ECTFE FLUOROPOLYMERS
NEMA ICS 4:2015 Application Guideline for Terminal Blocks
NEMA EW 3:1983(R2002) Semi-Automatic Wire-Feed Systems for Arc Welding
NEMA KS 3:2010 Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications
NEMA LSD 53-2010 PROPOSAL FOR DIGITAL PROTOCOL FOR LIGHTING CONTROL DEVICES
NEMA ICS 61800-2:2005 Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems
ST 1-1988 (R1994, R1997) SPECIALITY TRANSFORMERS (EXCEPT GENERAL-PURPOSE TYPE)
NEMA MG 2:2014 Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators
NEMA PB 1:2011 Panelboards
NEMA KS 1:2013 Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum)
NEMA SB 2:2016 Training Manual on Fire Alarm Systems
NEMA IA 2.2:2005 Programmable Controllers (PLC), Part 2: Equipment Requirements and Test
NEMA XR 9-1984 (R1994, R2000) POWER SUPPLY GUIDELINES FOR X-RAY MACHINES
NEMA WC 55 : 1992(R1999) INSTRUMENTATION CABLES AND THERMOCOUPLE WIRE
NEMA PE 5:1997(R2003) Utility-Type Battery Chargers
ASME PV CODE 7 : 2017 BPVC Section VII-BOILER AND PRESSURE VESSEL CODE - RECOMMENDED GUIDELINES FOR THE CARE OF POWER BOILERS
ASME CSD1 : 2012 CONTROLS AND SAFETY DEVICES FOR AUTOMATICALLY FIRED BOILERS
ASME A17.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
ASME HST 5 : 2014 PERFORMANCE STANDARD FOR AIR CHAIN HOISTS
NEMA OS 1 : 2013 SHEET-STEEL OUTLET BOXES, DEVICE BOXES, COVERS, AND BOX SUPPORTS
ANSI/NEMA SB 40:2015 Communications Systems for Life Safety in Schools
NEMA OS 2 : 2013 NONMETALLIC OUTLET BOXES, DEVICE BOXES, COVERS, AND BOX SUPPORTS
NEMA IA2.1 : 2005 PROGRAMMABLE CONTROLLERS - PART 1: GENERAL INFORMATION
NEMA ABP 8:2016 Avoid Arc-Flash Occurrences by Following Industry Standards
NEMA AB 5-2011 Establishing Levels of Selective Coordination for Low Voltage Circuit Breakers
NEMA ST 20:2014 Dry Type Transformers for General Applications
NEMA WD 1:1999(R2005, R2010, R2015, R2020) General Color Requirements for Wiring Devices
NEMA ICS 7.2 : 2015 APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS
NEMA ICS 3.1 : 2009(R2014) GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS
NEMA EW 7 : 1989 ELECTRICAL ARC WELDING POWER SOURCES FOR THE NON-PROFESSIONAL OPERATOR
ANSI C57.12.27 : 1982 LIQUID-FILLED DISTRIBUTION TRANSFORMERS USED IN PAD-MOUNTED INSTALLATIONS INCLUDING UNIT SUBSTATIONS CONFORMANCE STANDARD FOR,
NEMA HP 100.1 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH FEP FLUOROCARBONS
NEMA 280 : 1990 APPLICATION GUIDE FOR GROUND FAULT CIRCUIT INTERRUPTERS
AASHTO R 63 : 2013 PRACTICE FOR SOLID WALL HIGH-DENSITY POLYETHYLENE (HDPE) CONDUIT FOR NON-PRESSURE APPLICATIONS USED FOR THE PROTECTION OF POWER AND TELECOMMUNICATIONS CABLES
ASME B31.4 : 2016 PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES
ANSI C62.61:1993 American National Standard for Gas Tube Surge Arresters on Wire Line Telephone Circuits
UFC 3-460-01 : Change 3 UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES
ANSI/ASSE A10.15 : 1995 : R2005 SAFETY REQUIREMENTS FOR DREDGING
NEMA DC 20:1992(R2003,R2009,R2014) Residential Controls—Class 2 Transformers
NEMA VE 2 : 2013 CABLE TRAY INSTALLATION GUIDELINES
ANSI/NEMA KS 2:2013 Distribution Equipment Switch Application Guide, A User\'s Reference
NEMA ICS 6-1993 (R2006) Industrial Control and Systems: Enclosures
UFC 3-600-01 : Change 2 UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES
NEMA LSD 71 : 2014 BEST PRACTICES FOR METAL HALIDE LIGHTING SYSTEMS RELATIVE TO LAMP RUPTURE RISKS
NEMA ICS 1.3:1986 (R2001, R2009, R2015) Preventive Maintenance of Industrial Control and Systems Equipment
ANSI C82.1:2004(R2008) American National Standard for Lamp Ballasts—Line Frequency Fluorescent Lamp Ballasts
NEMA ICS 14:2015 Application Guide for Electric Fire Pump Controllers
NEMA PB 2:2011 Deadfront Distribution Switchboards
ASME A112.14.4 : 2001 : R2017 GREASE REMOVAL DEVICES
NEMA ICS 2:2008 Controllers, Contactors and Overload Relays Rated 600 V
ANSI/ASSE A10.15 : 1995 : R2011 SAFETY REQUIREMENTS FOR DREDGING
UFC 1-201-01 : 2013 UNIFIED FACILITIES CRITERIA - NON-PERMANENT DOD FACILITIES IN SUPPORT OF MILITARY OPERATIONS
ASME A112.14.4 : 2001 : R2007 GREASE REMOVAL DEVICES
NEMA ICS 10.2 : 2005 INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT
UFC 3-530-01 : Change 3 UNIFIED FACILITIES CRITERIA - INTERIOR AND EXTERIOR LIGHTING SYSTEMS AND CONTROLS
NEMA SB 1 : 2014 QUALITY INFORMATIONAL GUIDE FOR AUTOMATIC FIRE DETECTION AND ALARM SYSTEMS
ASME B30.2 : 2016 OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, SINGLE OR MULTIPLE GIRDER, TOP RUNNING TROLLEY HOIST) - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS
UFC 3-575-01 : 2012 UNIFIED FACILITIES CRITERIA - LIGHTNING AND STATIC ELECTRICITY PROTECTION SYSTEMS
NEMA ICS 16:2001 Motion/Position Control Motors, Controls and Feedback Devices
NEMA ICS 61131-1-2005 (R2013, 2021) (Formerly NEMA IA 2.1-2005) Programmable Controllers, Part 1: General Information
ANSI/NEMA PB 2.1:2013 General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
ANSI C82.2:2002 (R2007, R2016, S2021) American National Standard for Lamp Ballasts—Method of Measurement of Fluorescent Lamp Ballasts
ANSI C136.40:2014 American National Standard for Roadway and Area Lighting Equipment—Solar Lighting Systems
ANSI C82.12-1999 LAMP BALLASTS - FLUORESCENT ADAPTERS
NEMA FG 1:1993 FIBERGLASS CABLE TRAY SYSTEMS
ASME B31.8 : 2016 Gas Transmission and Distribution Piping Systems
NEMA PRP 5 : 2015 INSTALLATION GUIDELINES FOR SURFACE NONMETALLIC RACEWAY
NEMA VE 1:2017 Metal Cable Tray Systems
NEMA ICS 10.1 : 2005 INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT
ANSI C57.12.13 : 1982 LIQUID-FILLED TRANSFORMERS USED IN UNIT INSTALLATIONS INCLUDING UNIT SUBSTATIONS, CONFORMANCE STANDARD FOR
NEMA DC 3:2013 Residential Controls—Electrical Wall-Mounted Room Thermostats
NEMA LSD 27:2012 Best Practices for Operating Fluorescent Lighting Systems
NEMA ICS 61800-1:2002(R2007) Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems
NEMA HP 100.3 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH CROSS-LINKED (THERMOSET) POLYOLEFIN (XLPO)
ANSI C136.16 : 1997 Roadway and Area Lighting Equipment— Enclosed Post Top-Mounted Luminaires
NEMA BU 2 : 1996 MAJOR REQUIREMENTS RELATED TO THE APPLICATION AND TESTING OF LOW VOLTAGE BUSWAY
FC 4-179-03F : 2015 FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE
UFC 4-021-02 : 2013 UNIFIED FACILITIES CRITERIA - ELECTRONIC SECURITY SYSTEMS
NEMA PR 4 : 83(R1989) PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE FOR INDUSTRIAL USE
NEMA DC 13:1979 (R1985, R1991, R1997, R2002, R2008, R2013) Residential Controls—Line Voltage Integrally Mounted Thermostats for Electric Heaters
NEMA PE 7 : 1997(R2003) COMMUNICATIONS TYPE BATTERY CHARGERS
ANSI/NEMA FB 11-2000 PLUGS, RECEPTACLES AND CONNECTORS OF THE PIN AND SLEEVE TYPE FOR HAZARDOUS LOCATIONS
ANSI/NEMA PB 1.1:2013 General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less
ANSI/NEMA AB 3:2013 Molded-Case Circuit Breakers and Their Application
ASME A17.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
NEMA HP 100:1991(R2010) High-Temperature Instrumentation and Control Cables
NEMA HP 100.2 : 1991(R2010) HIGH TEMPERATURE INSTRUMENTATION AND CONTROL CABLES INSULATED AND JACKETED WITH ETFE FLUOROPOLYMERS
NEMA ICS 7.1:2014 Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems
NEMA ICS 1 : 2000(R2015) INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS
NEMA BU 1.1:2010 General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less
NEMA UC 2:1993 (R2000, R2005, R2010, R2015) UNDERCARPET POWER DISTRIBUTION SYSTEMS
NFPA 560 : 2007 STORAGE, HANDLING, AND USE OF ETHYLENE OXIDE FOR STERILIZATION AND FUMIGATION
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
WW-F-2743 Revision A:1998 FURNACES, WARM AIR & HEATERS, UNIT, FORCED AIR CIRCULATION, OIL & GAS FIRED
MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
EEE 602 : 2007 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
API RP 2207 : 2017 PREPARING TANK BOTTOMS FOR HOT WORK
API MPM CH4.2 : 2003 : INC : ADD 1 : 2015 : R2011 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4: PROVING SYSTEMS - SECTION 2: DISPLACEMENT PROVERS
IEEE DRAFT 1215 : D13 2001 DRAFT GUIDE FOR THE APPLICATION OF SEPARABLE INSULATED CONNECTORS
CSA C22.2 No. 198.1 : 2006 : R2015 EXTRUDED INSULATING TUBING
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
MIL-HDBK-759 Revision C:1995 HANDBOOK FOR HUMAN ENGINEERING DESIGN GUIDELINES
UFC 4-133-01N : Change 5 UNIFIED FACILITIES CRITERIA - NAVY AIR TRAFFIC CONTROL FACILITIES
NFPA 430 : 2004 STORAGE OF LIQUID AND SOLID OXIDIZERS
IEEE C62.42-2005 IEEE Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to or Less than 1000 V (ac) Or 1200 V (dc)] Circuits
NFPA 654 : 2017 PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS
ANSI A10.7 : 2011 SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS
API 674 REDLINE : 2010 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
IEEE C62.23-1995 IEEE Application Guide for Surge Protection of Electric Generating Plants
10/30231432 DC : 0 BS EN ISO 10439-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS
NFPA 499 : 2017 CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
AWS D10.6 : 1991 GAS TUNGSTEN ARC WELDING OF TITANIUM PIPING AND TUBING, RECOMMENDED PRACTICES FOR
NFPA 432 : 2002 CODE FOR THE STORAGE OF ORGANIC PEROXIDE FORMULATIONS
NFPA 1141 : 2017 FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS
UFC 3-550-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION
ISA RP60.4 : 1990 DOCUMENTATION FOR CONTROL CENTERS
IEEE 487.2-2013 IEEE Standard for the Electrical Protection of Communication Facilities Serving Electric Supply Locations through the Use of Optical Fiber Systems
13/30271407 DC : DRAFT DEC 2013 BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
ANSI A10.5 : 2013 SAFETY REQUIREMENTS FOR MATERIAL HOISTS
API 682 : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 676 REDLINE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
BS EN 60974-6:2016 Arc welding equipment Limited duty equipment
AAMI ST24 : 1999 : R2009 AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
API 500C : 2ED 84(R1990) CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PIPELINE TRANSPORTATION FACILITIES
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
MIL-D-55162 Revision B:1984 DARK ROOM, PHOTOGRAPHIC, PORTABLE ES-38()
NFPA 56 : 2017 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
IEEE DRAFT C57.121 : D4 OCT 96 DRAFT GUIDE FOR ACCEPTANCE AND MAINTENANCE OF LESS-FLAMMABLE HYDROCARBON FLUID IN TRANSFORMERS
14/30299454 DC : 0 BS EN 60974-6 - ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT
NFPA 385 : 2017 TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS
MIL-T-28690 Base Document:1991 TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 50 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER
MIL-A-28865 Revision A:1987 ANTENNA GROUP, OE-82()/WSC-1(V)
MIL-C-0043584 Revision C:1985 COUNTER, CHECKOUT, CONVEYOR
GGG-S-69 Revision D:1983 SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY)
AAA-B-92 Revision D:1977 BALANCE, ANALYTICAL
MIL-T-52991 Revision A:1992 TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP
MIL HDBK 1028/8 : A DESIGN OF PEST MANAGEMENT FACILITIES
API 1129 : 1996 ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY
04/30114086 DC : DRAFT JUL 2004 EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE)
ANSI E1.50-1 : 2017 REQUIREMENTS FOR THE STRUCTURAL SUPPORT OF TEMPORARY LED, VIDEO & DISPLAY SYSTEMS
MIL D 22612 : C DETECTOR, CONTAMINATED FUEL
MIL-PRF-32026 Base Document:1998 CONTAINERIZED KITCHEN
RMA B28.9 : 1983 AMERICAN NATIONAL STANDARDS FOR RUBBER MACHINERY LET-OFF EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CAR AND USE
SCTE 71 : 2008 SPECIFICATION FOR BRAIDED, 75 OHM, COAXIAL, MULTI-PURPOSE CABLE
MIL-PRF-26139 Revision E:2015 TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1)
NFPA 88B : 1997 REPAIR GARAGES
F-B-2903 Base Document:1998 BOILERS, STEAM AND HOT WATER, FIRETUBE, SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
IEEE DRAFT 605 : APR 97 DRAFT STANDARD GUIDE FOR DESIGN OF SUBSTATION RIGID-BUS STRUCTURES
API 49 : 2001 RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE
NFPA 3 : 2018 COMMISSIONING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS
BS EN ISO 19906:2010 Petroleum and natural gas industries. Arctic offshore structures
API 2007 : 2ED 83 SAFE MAINTENANCE PRACTICES IN REFINERIES
ISO 12648:2006 Graphic technology Safety requirements for printing press systems
FM 5580 : 2012 HYBRID (WATER AND INERT GAS) FIRE EXTINGUISHING SYSTEMS
ASTM E 2543 : 2008 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
MIL PRF 52849 : D TEST KIT, PETROLEUM: AVIATION FUEL CONTAMINATION (PORTABLE)
MIL-S-4461 Revision H:1974 SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS
MIL-W-80046 Revision D:1990 WELDING MACHINES, RESISTANCE, STORED ENERGY, CAPACITOR DISCHARGE, DUAL RANGE
ISA 61241-2 : 2006 ELECTRICAL APPARATUS FOR USE IN ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY PRESSURIZATION "PD"
ANSI Z245.1 : 2017 MOBILE WASTES AND RECYCLABLE MATERIALS COLLECTION, TRANSPORTATION, AND COMPACTION EQUIPMENT
MIL-S-12514 Revision C:1974 STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC
ICC IPMC INTERNATIONAL PROPERTY MAINTENANCE CODE : 2015 INTERNATIONAL PROPERTY MAINTENANCE CODE
NFPA 410 : 2015 AIRCRAFT MAINTENANCE
IEEE DRAFT C37.91 : D7.0 2006 PROTECTING POWER TRANSFORMERS
ASAE S361.3 : 1990(R2011) SAFETY FOR PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT
ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES
12/30269145 DC : 0 BS EN 60695-1-40 ED 1.0 - FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
API 676 CHINESE : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
API 11PGT : 1992 RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES
AIHA Z9.1 : 2006 VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS
MIL-PRF-32090 Revision A:2016 DELIVERY SYSTEM, AERIAL, BULK FUEL
API 677 :2006 GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
NFPA 497B : 1991 RECOMMENDED PRACTICE FOR THE CLASSIFICATION OF CLASS II HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
MIL-B-28685 Base Document:1990 BAGHOUSE, REVERSE PULSE JET; FOR PACKAGED BOILEK3 FIRED ON COAL OR A COMBINATION OF COAL AND GAS, COAL AND OIL, OR COAL-GAS-OIL (2,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
ANSI/ASSE A10.27 : 1998 SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES
MIL-M-28762 Revision C:1990 MONITOR, PUMP NOISE, AN/WSQ-3 (METRIC)
API 68 : 1998 : R2010 RECOMMENDED PRACTICE FOR OIL AND GAS WELL SERVICING AND WORKOVER OPERATIONS INVOLVING HYDROGEN SULFIDE
BS ISO 21789:2009 Gas turbine applications — Safety
CSA C22.4 No. 1 : 2009(R2018) OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
A-A-58050 Revision A:2000 FLUORESCENT PENETRANT INSPECTION UNITS INTEGRALLY ASSEMBLED SINGLE UNIT AND SEPARATE MODULAR STATION TYPES
AAMI ST50 : 2004 : R2010 DRY HEAT (HEATED AIR) STERILIZERS
UFC 4-740-06 : 2006 UNIFIED FACILITIES CRITERIA - YOUTH CENTERS
BS EN 60974-1:2012 Arc welding equipment Welding power sources
ANSI B11.15 : 2001 : R2007 SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES
UFC 1-200-01 : 20071127 UNIFIED FACILITIES CRITERIA (UFC) DOD BUILDING CODE(GENERAL BUILDING REQUIREMENTS)
AFGS-87241 Revision A:1989 SIMULATORS, FLIGHT
CSA T568.3 : 2005 OPTICAL FIBER CABLING COMPONENTS STANDARD
API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
IEEE C57.111 : 1989 GUIDE FOR ACCEPTANCE OF SILICONE INSULATING FLUID AND ITS MAINTENANCE IN TRANSFORMERS
IEEE 3007.2 : 2010 This recommended practice covers the maintenance of industrial and commercial power systems.
API RP 74 : 2001 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL-STD-188-154 Revision A:1997 SUBSYSTEM, EQUIPMENT, AND INTERFACE STANDARDS FOR COMMON LONG HAUL AND TACTICAL TELECOMMUNICATIONS CONTROL FACILITIES
IEC 60364-5-52:2009 Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
ATIS T1.403.01 : 99(R2005) NETWORK AND CUSTOMER INSTALLATION INTERFACES - INTEGRATED SERVICES DIGITAL NETWORK (ISDN) PRIMARY RATE LAYER 1 ELECTRICAL INTERFACE SPECIFICATION
UNI EN ISO 19906 : 2012 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
IEEE DRAFT C37.20.4 : 2001 DRAFT STANDARD FOR INDOOR AC SWITCHES RATED ABOVE 1KV THROUGH 38KV FOR USE IN METAL-ENCLOSED SWITCHGEAR
08/30195564 DC : 0 BS EN 60974-1 - ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
05/30127458 DC : DRAFT JAN 2005 ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
ANSI/SPI B151.29:2014 PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR VERTICAL CLAMP INJECTION MOLDING MACHINES
CSA ISO 19906 : 2011 : R2016 PETROLEUM AND NATURAL GAS INDUSTRIES - ARCTIC OFFSHORE STRUCTURES
API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
API 673 : 2014 CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2017 GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES
CSA 12.8 :2002 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
NFPA 61 : 2017 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
A-A-50314 Base Document:1997 Boring Machines, Engine Cylinder (Portable)
F-B-2909 Base Document:1997 BURNERS, SINGLE: LIGHT OIL, GAS, AND LIGHT OIL-GAS COMBINATION FOR PACKAGED HEATING BOILERS (UP TO 320, 000 BTU/HR THERMAL OUTPUT CAPACITY)
CSA C22.2 No. 63 : 1993 HOUSEHOLD REFRIGERATORS AND FREEZERS
NFPA 651 : 1998 MACHINING AND FINISHING OF ALUMINUM AND THE PRODUCTION AND HANDLING ALUMINUM POWDERS
API 670 : 2014 MACHINERY PROTECTION SYSTEMS
ANSI B11.15 : 2001 : R2012 SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES
ANSI Z21.60-2017/CSA 2.26-2017 Decorative gas appliances for installation in solid-fuel burning fireplaces
ANSI A225.1 : 1987 MANUFACTURED HOME INSTALLATIONS
NFPA 1194 : 2018 RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
NACE RP 02 90 : 0 IMPRESSED CURRENT CATHODIC PROTECTION OF REINFORCING STEEL IN ATMOSPHERICALLY EXPOSED CONCRETE STRUCTURES
ANSI Z21.87 :2007 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
C22.2 NO. 41-13 (R2017) Grounding and bonding equipment (Tri-national standard, with NMX-J-590- ANCE and UL 467)
C22.2 NO. 188-18 Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE)
NFPA 1620 : 2015 PRE-INCIDENT PLANNING
NFPA 72C : 1986 INSTALLATION, MAINTENANCE, AND USE OF REMOTE STATION PROTECTIVE SIGNALING SYSTEMS
CSA C22.2 No. 63 : 1993 : INC : UPD 6 : 2012 : R200800 HOUSEHOLD REFRIGERATORS AND FREEZERS
NFPA 46 : 1996 STORAGE OF FOREST PRODUCTS
ISA 12.10 : 1988 AREA CLASSIFICATION IN HAZARDOUS (CLASSIFIED) DUST LOCATIONS
ASTM F 2699 : 2008 Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
ISA RP12.24.01 : 1998 RECOMMENDED PRACTICE FOR CLASSIFICATIONS OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS I ZONE 0, ZONE 1, OR ZONE 2
ANSI Z245.41 : 2015 FACILITIES FOR THE PROCESSING OF COMMINGLED RECYCLABLE MATERIALS - SAFETY REQUIREMENTS
NFPA 72A : 1987 INSTALLATION, MAINTENANCE, AND USE OF LOCAL PROTECTIVE SIGNALING SYSTEMS
C22.2 NO. 43-17 Lampholders (Binational standard with UL 496)
ISO 13577-3:2016 Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases
NFPA 123 : 1999 FIRE PREVENTION AND CONTROL IN UNDERGROUND BITUMINOUS COAL MINES
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
IEEE DRAFT 1242 : D4 99 DRAFT GUIDE FOR SPECIFYING AND SELECTING POWER, CONTROL AND SPECIAL PURPOSE CABLE FOR PETROLEUM AND CHEMICAL PLANTS
C22.2 NO. 18.3-12 (R2017) Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
IEEE C62.44-2016 IEEE Guide for the Application of Low-Voltage (1000 V rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Equipment)
CSA T568.1 : 2005 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 45.2 : 2008 : R2013 ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL
ASTM B 812 : 1996 : R2008 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
ANSI Z21.76-2016 Gas-fired unvented catalytic room heaters for use with propane gas
ASTM F 2361 : 2003 : R2009 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
CSA C22.2 No. 45.2:2008 ELECTRICAL RIGID METAL CONDUIT - ALUMINUM, RED BRASS, AND STAINLESS STEEL
ANSI Z21.92 : 2001 : INC : ADD B : 2010 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
NFPA 57 : 2002 LIQUEFIED NATURAL GAS (LNG) VEHICULAR FUEL SYSTEMS CODE
ASTM F 857 : 2017 : REDLINE Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
ANSI Z21.78 : 2010 : R2015 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
ANSI Z21.50 : 2016 VENTED DECORATIVE GAS APPLIANCES
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 ELECTRICAL RIGID METAL CONDUIT - STEEL
IEEE 1827-2016 IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
ANSI A10.22 : 2007 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS&#39; HOISTS
SAE J 2343 : 2018 RECOMMENDED PRACTICE FOR LNG MEDIUM AND HEAVY-DUTY POWERED VEHICLES
CSA C22.2 No. 45.1 : 2007 : FR ELECTRICAL RIGID METAL CONDUIT - STEEL
CAN/CSA-C22.2 NO. 60947-1-13 (R2018) Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE)
ESD ADV53.1 : 1995 ESD PROTECTIVE WORKSTATIONS
ANSI Z21.88 : 2017 VENTED GAS FIREPLACE HEATERS
CSA/ANSI NGV 5.2-2017 Vehicle fueling appliances (VFA)
ANSI Z83.19-2017/CSA 2.35-2017 GAS-FIRED HIGH-INTENSITY INFRARED HEATERS
API 2016 : 2001 GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS
CAN/CSA-C22.2 NO. 60079-30-1:17 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations)
NFPA 472 : 2018 COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS
ANSI Z21.89-2017/CSA 1.18-2017 Outdoor cooking specialty gas appliances
CSA HGV 4.6 : 2013 MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
API 613:2003 SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
CSA C22.2 No. 1691 : 2012 SINGLE POLE LOCKING-TYPE SEPARABLE CONNECTORS
NFPA 485 : 1999 STORAGE, HANDLING, PROCESSING, AND USE OF LITHIUM METAL
NFPA 790 : 2018 COMPETENCY OF THIRD-PARTY FIELD EVALUATION BODIES
CSA 12.5 : 1999 : R2014 NGV DISPENSING SYSTEMS
CSA C22.2 No. 60745-2-15 : 2010 : R2015 HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS
API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
UL 60950-22:2ED 2017-03 Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors
API MPM CH7.3:2011 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS
ANSI Z21.97 : 2017 OUTDOOR DECORATIVE GAS APPLIANCES
UL 60745-2-15:1ED 2010-06 Hand-Held Motor-Operated Electric Tools - Safety - Part 2-15: Particular Requirements for Hedge Trimmers
NFPA 1500 : 2018 FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM
IEEE 1202-2006 IEEE Standard for Flame-Propagation Testing of Wire & Cable
NFPA 232AM : 1991 FIRE PROTECTION FOR ARCHIVES AND RECORDS CENTERS
NFPA 19911 : 1991 FIRE PROTECTION OF MUSEUMS AND MUSEUM COLLECTIONS
NFPA 802 : 1993 NUCLEAR RESEARCH AND PRODUCTION REACTORS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
NFPA 85I : 1989 STOKER OPERATION
NFPA 4 : 2018 INTEGRATED FIRE PROTECTION AND LIFE SAFETY SYSTEM TESTING
NFPA 43D : 1994 STORAGE OF PESTICIDES
NFPA 497A : 1992 CLASSIFICATION OF CLASS I HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
NFPA 65 : 1993 PROCESSING AND FINISHING OF ALUMINUM
NFPA 8501 : 1997 SINGLE BURNER BOILER OPERATION
IEEE 1017-2013 IEEE Recommended Practice for Field Testing Electric Submersible Pump Cable
NFPA 913 : 1992 HISTORIC SITES AND STRUCTURES
API 1632 : 1996 CATHODIC PROTECTION OF UNDERGROUND PETROLEUM STORAGE TANKS AND PIPING SYSTEMS
API 619 REDLINE : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
FM 3640 : 2013 LAND MOBILE RADIOS FOR USE IN CLASS I, DIVISION 1 HAZARDOUS (CLASSIFIED) LOCATIONS
CSA C22.2 No. 293.1 : 2017 SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - GENERAL, TESTING, MARKING, AND DOCUMENTATION REQUIREMENTS
I.S. HD 60364-5-52:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
EN 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
ASTM F 2521 : 2009 : R2014 Standard Specification for Heavy-Duty Ranges, Gas and Electric
IEEE 1491-2012 REDLINE IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
ANSI A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
ANSI Z21-10-3 : 2017 GAS-FIRED WATER HEATERS, VOLUME 3, STORAGE WATER HEATERS WITH INPUT RATINGS ABOVE 75,000 BTU PER HOUR, CIRCULATING AND INSTANTANEOUS
AAMI ST65 : 2008 PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES
CSA C22.2 NO. 60947-5-2:14 (R2019) Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches (Bi-national standard, with UL 60947-5-2)
AAMI ST24:1999(R2018) AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
CSA C22.2 No. 2459 : 2008 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
ANSI/ASSE A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
NFPA RESIDENTIAL SPRINKLER SYSTEMS : LATEST RESIDENTIAL SPRINKLER SYSTEMS: PROTECTING LIFE AND PROPERTY
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
NFPA 1902 : 1991 INITIAL ATTACK FIRE APPARATUS
I.S. EN ISO 10439-1:2015 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015)
AIHA Z9.6 : 2008 EXHAUST SYSTEMS FOR GRINDING, POLISHING, AND BUFFING
I.S. EN 60695-1-40:2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
I.S. EN 60974-6:2016 ARC WELDING EQUIPMENT - PART 6: LIMITED DUTY EQUIPMENT
NFPA 12B : 1990 HALON 1211 FIRE EXTINGUISHING SYSTEMS
ANSI A10.16 REDLINE : 2009 COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009)
ISA 60079-29-2 : 2012 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
ASTM F 1919 : 2014 : REDLINE Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
IEEE C37.59-2007 IEEE Standard Requirements for Conversion of Power Switchgear Equipment
ASAE EP344.2 : 1999 LIGHTING FOR DAIRY FARMS AND THE POULTRY INDUSTRY
ANSI B151.5 : 1982 PLASTIC FILM AND SHEET WINDING EQUIPMENT - CONSTRUCTION, CARE AND USE
ANSI S12.15 : 1992 : R2007 FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED
NFPA 921 : 2017 GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
ASTM F 860 : 2007 : R2018 : EDT 1 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
IEEE 1159-2009 IEEE Recommended Practice for Monitoring Electric Power Quality
BS EN 60079-30-1:2017 Explosive atmospheres Electrical resistance trace heating. General and testing requirements
ASTM F 2520 : 2005 : R2012 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
ASTM B 812 : 1996 : R2002 : EDT 1 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
EI 1592 : 2017 DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC BULK WATER DETECTORS FOR USE IN AVIATION FUELLING
ASTM F 2374 : 2018-02 PRACTICE FOR DESIGN, MANUFACTURE, OPERATION, AND MAINTENANCE OF INFLATABLE AMUSEMENT DEVICES
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 4 : 2017 : R201500 HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS
ASTM C 1217 : 2000 : R2012 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
ASTM F 2834 : 2010 : REV A Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
ASTM F 1602 : 2012 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
ASTM F 2796 : 2009 Standard Specification for Hot Food Holding Tables
ISO/TR 14799-1:2015 Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison
API 614 REDLINE : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
API 2610 : 2005 : R2010 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
ISO 19372:2015 Microturbines applications — Safety
API 651 : 2014 CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS
IEEE 1547-2003 IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
NSF 49 : 2016 BIOSAFETY CABINETRY: DESIGN, CONSTRUCTION, PERFORMANCE, AND FIELD CERTIFICATION
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
NFPA 101 : 2018 LIFE SAFETY CODE
NFPA 75 : 2017 FIRE PROTECTION OF INFORMATION TECHNOLOGY EQUIPMENT
API 551 : 2016 PROCESS MEASUREMENT
NFPA 731 : 2017 INSTALLATION OF ELECTRONIC PREMISES SECURITY SYSTEMS
SAE J 1772 : 2017 SAE ELECTRIC VEHICLE AND PLUG IN HYBRID ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER
API 1626 REDLINE : 2010 STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS
API 2510 : 2001 : R2011 DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS
IEC TS 61968-2:2011 Application integration at electric utilities - System interfaces for distribution management - Part 2: Glossary
NFPA 55 : 2016 COMPRESSED GASES AND CRYOGENIC FLUIDS CODE
ISO 21789:2009 Gas turbine applications — Safety
ISO 10436:1993 Petroleum and natural gas industries — General-purpose steam turbines for refinery service
IEEE 628-2011 IEEE Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
IEEE 1547.2 : 2008 APPLICATION GUIDE FOR IEEE STD 1547[TM], IEEE STANDARD FOR INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS
IEEE 1458-2005 IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE DRAFT 1184 : D21 2006 GUIDE FOR BATTERIES FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS
ANSI Z21.91 : 2017 VENTLESS FIREBOX ENCLOSURES FOR GAS-FIRED UNVENTED DECORATIVE ROOM HEATERS
IEEE 1635-2012 IEEE/ASHRAE Guide for the Ventilation and Thermal Management of Batteries for Stationary Applications
IEEE 1818-2017 IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations
IEEE 1662-2008 IEEE Guide for the Design and Application of Power Electronics in Electrical Power Systems on Ships
IEEE C37.20.10-2016 IEEE Standard Definitions for AC (52 kV and below)and DC (3.2 kV and below) Switchgear Assemblies
IEEE 45.8-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems
IEEE 3001.5-2013 IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
IEEE C62.72-2007 IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
BS EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries. Fired heaters for general refinery service
C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
BS EN ISO 10440-1:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free)
18/30375223 DC BS EN 60947-4-3. Low-voltage switchgear and controlgear Part 4-3. Contactors and motor-starters. Semiconductor controllers and semiconductor contactors for non-motor loads
ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements
18/30359998 DC : 0 BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
NASA STD 3000 VOL 2 : 1995 MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2
CSA B44.7 : 2007 : R2012 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
UL 1993:5ED 2017-01 Self-Ballasted Lamps and Lamp Adapters
ICC IPC CODE & COMMENTARY : 2015 IPC® Code and Commentary
NFPA 61 : 2020 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
CSA 6.20 : 2010 : R2015 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 IBC® Code and Commentary, Volume 2
ICC IWUIC INTERNATIONAL WILDLAND U.I. CODE : 2015 INTERNATIONAL WILDLAND-URBAN INTERFACE CODE
CSA C22.2 No. 144.1 : 2016 GROUND-FAULT CIRCUIT-INTERRUPTERS
NASA KSC E 165 : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
CSA C22.2 No. 66.1 : 2006 : INC : UPD 2 : 2013 : R201100 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
ICC IEBC CODE AND COMMENTARY : 2015 IEBC® Code and Commentary
CAN/CSA-C22.2 NO. 281.2-12 (R2017) Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: Particular requirements for protection devices for use in charging systems (Tri-national standard, with UL 2231-2 and NMX-J-668/2-ANCE)
NASA KSC STD Z 0006 : 1995 DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA KSC STD E 0006 : 1993 INSTRUMENTATION AND COMMUNICATIONS CABLE APPLICATIONS, STANDARD FOR
ICC IRC CODE AND COMMENTARY VOLUME 2 : 2015 IRC® Code and Commentary, Volume 2
CSA C22.2 No. 281.2 : 2012 : INC : UPD 2 : 2016 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
ICC ISPSC CODE AND COMMENTARY : 2015 ISPSC® Code and Commentary
CSA C22.2 No. 227.1:2006 ELECTRICAL NONMETALLIC TUBING
CSA C22.2 No. 198.2 : 2005 SEALED WIRE CONNECTOR SYSTEMS
NASA KSC STD E 0012 : 2013 FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
CSA C22.2 No. 112 : 2015 ELECTRIC CLOTHES DRYERS
MIL-PRF-44259 Revision E:2009 LIGHT SET, PORTABLE, FLUORESCENT
CSA C22.2 No. 145 : 2011 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
CSA C22.2 No. 198.2 : 2005 : R2015 SEALED WIRE CONNECTOR SYSTEMS
NASA KSC STD E 0002 : 2009 HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR
UL 444:5ED 2017-01 Communications Cables
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 8719.9 : 2015 LIFTING STANDARD
NASA KSC E 166 : 2009 INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
UL 1682:5ED 2017-02 Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type
NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
CSA C22.2 No. 60950-1 :2007 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 198.2 : 2005 : R2010 SEALED WIRE CONNECTOR SYSTEMS
UL 1786:4ED 2014-12 Direct Plug-In Nightlights
NASA KSC STD E 0022 : 2013 BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS
ICC 2012 INTERNATIONAL FIRE CODE : 2012 INTERNATIONAL FIRE CODE
NASA KSC STD Z 0007 : 1973 DESIGN OF HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, STANDARD FOR
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 227.1 : 2006 : INC : UPD 2 : 2014 : R201100 ELECTRICAL NONMETALLIC TUBING
ICC IFGC CODE AND COMMENTARY : 2015 IFGC® Code and Commentary
ICC IECC CODE AND COMMENTARY : 2015 IECC® Code and Commentary
CAN/CSA-C22.2 NO. 281.1-12 (R2017) Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: General requirements (Tri-national standard, with UL 2231-1 and NMX-J-668/1-ANCE)
NASA KSC STD E 0001 : 2008 DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
NASA KSC SPEC E 0017 : 1996 ELECTRICAL POWER CABLE, INSTALLATION OF, SPECIFICATION FOR
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
ICC IMC Code and Commentary : 2015 IMC® Code and Commentary
UL 60947-7-1:4ED 2017-01 Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors
ASHRAE GUIDELINE 21 : 2012 VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS
ASTM D 3485 : 2015 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
NASA MSFC RQMT 2918 : 2015 REQUIREMENTS FOR ELECTROSTATIC DISCHARGE CONTROL
CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
UL 2231-2:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
UL 2420:1ED 2009-07 Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings
ICC 2012 INT. EXIST. BUILDING CODE : 2012 INTERNATIONAL EXISTING BUILDING CODE
CSA C22.2 No. 62.1 : 2015 NONMETALLIC SURFACE RACEWAYS AND FITTINGS
CSA C22.2 No. 145 : 2011 : R2015 ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
C22.2 NO. 1993-17 Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993)
CSA C22.2 No. 66.1 : 2006 : INC : UPD 1 : 2012 : R201100 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 126.2:2002 NONMETALLIC CABLE TRAY SYSTEMS
NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
CSA 6.20 : 2010 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
CSA C22.2 No. 83.1 : 2007 ELECTRICAL METALLIC TUBING - STEEL
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 IFC® Code and Commentary
ANSI Z21.23:2010 GAS APPLIANCE THERMOSTATS
NASA KSC GP 864 VOL 2A : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK
CSA C22.2 No. 281.2:2012 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
ISA 12.27.01 : 2011 REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS
CSA C22 NO. 4 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
API STD 612:2020 Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications
ASTM E 3010 : 2015 Standard Practice for Installation, Commissioning, Operation, and Maintenance Process (ICOMP) of Photovoltaic Arrays
CSA C22.2 No. 83.1 : 2007 : INC : UPD 1 : 2012 : R201200 ELECTRICAL METALLIC TUBING - STEEL
NASA KSC STD 164 : 1992 ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA STD 8719.12 : 2010 SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS
CSA/ANSI Z21.10.1:19/CSA 4.1:19 Gas water heaters, volume I, storage water heaters with input ratings of 75,000 Btu per hour or less
IEC 60445:2017 RLV Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 INTERNATIONAL FUEL GAS CODE
NASA SSTD 8070 0081 : 2001 FACILITY ELECTRICAL STANDARD
ASME A17.7-2007/CSA B44.7-07 (R2017) Performance-Based Safety Code for Elevators and Escalators (Bi-National standard, with ASME A17.7)
NASA KSC STD Z 0010 : 1983 DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR
NASA KSC SPEC E 0019 : 1997 AC POWER CABLE, GENERAL PURPOSE, MULTICONDUCTOR, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR
UL 2231-1:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements
UL 1472:2ED 2015-09 Solid-State Dimming Controls
UL 943:5ED 2016-05 Ground-Fault Circuit-Interrupters
UL 60947-7-3:3ED 2017-01 Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks
UL 496:14ED 2017-09 Lampholders
ICC 2012 INTERNATIONAL RESI. CODE : 2012 INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS
C22.2 NO. 18.5-13 (R2018) Positioning devices (Bi-national standard, with UL 1565)
CSA C22.2 No. 281.1 : 2012 : INC : UPD 1 : 2015 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: GENERAL REQUIREMENTS
CSA C22.2 No. 198.3:2005 COATED ELECTRICAL SLEEVING
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
NASA MSFC STD 1800 : 2008 ELECTROSTATIC DISCHARGE (ESD) CONTROL FOR PROPELLANT AND EXPLOSIVE DEVICES
CSA C22.2 No. 227.1 : 2006 : R2016 ELECTRICAL NONMETALLIC TUBING
CSA C22.2 No. 263 : 2015 FIRE PUMP CONTROLLERS
IEEE 3001.2-2017 IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems
CSA 6.29 : 2001 : INC : ADD B : 2010 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
CSA C22.2 No. 66.1 : 2006 : R2011 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
UL 514A:11ED 2013-02 Metallic Outlet Boxes
CSA 6.29 : 2001 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
ASTM F 2363/F2363M : 2017 : REDLINE Standard Specification for Sewage and Graywater Flow Through Treatment Systems
CSA C22.2 No. 60950-1 : 2007 : R2012 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
UL 61010-031:2ED 2017-01 Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety Requirements for Hand-Held and Hand-Manipulated Probe Assemblies for Electrical Test and Measurement
CSA C22.2 No. 227.1 : 2006 : R2011 ELECTRICAL NONMETALLIC TUBING
AIHA Z9.10 : 2010 FUNDAMENTALS GOVERNING THE DESIGN AND OPERATION OF DILUTION VENTILATION SYSTEMS IN INDUSTRIAL OCCUPANCIES
NASA KSC STD Z 0005 : 1988 DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR
CSA C22.2 42.1 : 2013 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC)
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA B44.7 : 2007 PERFORMANCE-BASED SAFETY CODE FOR ELEVATORS AND ESCALATORS
CSA C22.2 No. 305 : 2016 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES FOR USE WITH PHOTOVOLTAIC (PV) SYSTEMS
CSA C22.2 No. 227.2.1 : 2014 LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT
ICC 2012 INT. WILDLAND U.I. CODE : 2012 INTERNATIONAL WILDLAND-URBAN INTERFACE CODE
CSA C22.2 No. 18.5:2013 POSITIONING DEVICES
ANSI Z83.8 : 2016 GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES
ICC ISPSC INTERNATIONAL SWIMMING POOL AND SPA CODE : 2015 INTERNATIONAL SWIMMING POOL AND SPA CODE[TM] (ISPSC[TM])
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA 2.37 : 2014 GAS-FIRED OUTDOOR INFRARED PATIO HEATERS
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2012 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
CSA C22.2 No. 66.1 : 2006 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
ASTM E 1509 : 2012 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
ANSI Z21.89 : 2017 OUTDOOR COOKING SPECIALTY GAS APPLIANCES
CSA C22.2 No. 126.2 : 2002 : INC : UPD 1 : 2005 : R2012 NONMETALLIC CABLE TRAY SYSTEMS
CSA C22.2 No. 66.1 : 2006 : R2015 LOW VOLTAGE TRANSFORMERS - PART 1: GENERAL REQUIREMENTS
CAN/CSA-C22.2 NO. 126.2-02 (R2017) Nonmetallic Cable Tray Systems (Bi-National standard, with UL 568)
UL 1008:8ED 2014-12 Transfer Switch Equipment
ANSI Z21.23 : 2010 : R2015 GAS APPLIANCE THERMOSTATS
ASTM E 1509 : 2012 : R2017 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
NASA KSC SPEC E 0018 : 1997 AC POWER WIRE, GENERAL PURPOSE, SINGLE CONDUCTOR, 600 VOLT, 60 HERTZ, PROCUREMENT OF, SPECIFICATION FOR
ANSI/PIMA IT7.100:1993 (R1999) AUDIOVISUAL SYSTEMS - RECOMMENDED PRACTICE FOR DETERMINING THE DESIGN OF TEACHING-LEARNING SPACES WHERE AUDIOVISUAL EQUIPMENT IS USED
IEEE 464 : 1981 GROUNDED 830 V THREE-PHASE ELECTRICAL SYSTEM FOR OIL FIELD SERVICE, RECOMMENDED PRACTICE FOR
ANSI C12.16 : 1991 SOLID-STATE ELECTRICITY METERS
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
ANSI L1.1 : 1981 SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY,
IES LM 62 : 2006 : R2015 LABORATORY OR FIELD THERMAL MEASUREMENTS OF FLUORESCENT LAMPS AND BALLASTS IN LUMINAIRES
IES RP 11 : 2017 RECOMMENDED PRACTICE FOR LIGHTING FOR INTERIOR AND EXTERIOR RESIDENTIAL ENVIRONMENTS
IES G 1 : 2003 GUIDE FOR SECURITY LIGHTING FOR PEOPLE, PROPERTY, AND CRITICAL INFRASTRUCTURE
IES LM 62 : 2006 LABORATORY OR FIELD THERMAL MEASUREMENTS OF FLUORESCENT LAMPS AND BALLASTS IN LUMINAIRES
UNI EN ISO 10440-1 : 2008 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
SCTE 171 : 2016 PASSIVE NETWORK DEVICE (NID) ENCLOSURE SPECIFICATION
IES RP 2 : 2017 RECOMMENDED PRACTICE FOR RETAIL LIGHTING
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
UNI EN ISO 13705 : 2013 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
IES RP 7 : 2017 RECOMMENDED PRACTICE FOR LIGHTING INDUSTRIAL FACILITIES
ANSI N304 : 1986 NUCLEAR FUEL FACILITIES FOR REPROCESSING FUEL-FIRE PROTECTION,
IES HB 10 : 2011 THE LIGHTING HANDBOOK
CSA E60974.1 : 2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
NFPA 85F : 1988 INSTALLATION AND OPERATION OF PULVERIZED FUEL SYSTEMS
ANSI B77.1 : 2017 PASSENGER ROPEWAYS - AERIAL TRAMWAYS, AERIAL LIFTS, SURFACE LIFTS, TOWS AND CONVEYORS - SAFETY STANDARD
API MPM CH7.3 SPANISH : 2011 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS
IEEE 1531-2003 IEEE Guide for Application and Specification of Harmonic Filters
NFPA 50B : 1999 LIQUEFIED HYDROGEN SYSTEMS AT CONSUMER SITES
UFC 4-740-03 : 2002 UNIFIED FACILITIES CRITERIA - DESIGN: NAVY AND MARINE CORPS OUTDOOR ADVENTURE CENTERS AND RENTAL CENTERS
NASA STD 8719.11 : 2008 SAFETY STANDARD FOR FIRE PROTECTION
ANSI Z21.1 : 2016 HOUSEHOLD COOKING GAS APPLIANCES
ANSI B11.25 : 2015 SAFETY REQUIREMENTS FOR LARGE MACHINES
NFPA 85C : 1991 PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES
ASTM E 2908 : 2012 Standard Guide for Fire Prevention for Photovoltaic Panels, Modules, and Systems
MIL-B-28514 Revision A:1983 BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM)
GGG-L-795 Revision E:1990 LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
UFC 4-740-14 : 2002 UNIFIED FACILITIES CRITERIA - DESIGN: CHILD DEVELOPMENT CENTERS
FC 4-740-02F : 2013 FACILITIES CRITERIA - AIR FORCE FITNESS CENTERS
MIL-P-43155 Revision F:1984 PRINTING PLANT, SPECIAL WARFARE, TRANSPORTABLE, (LIGHTWEIGHT) MODEL 800
MIL-S-29410 Revision B:1988 SHELTER ASSEMBLY, RIGID GENERAL PURPOSE
ASCE T&DI 21.2 : 2008 AUTOMATED PEOPLE MOVER STANDARDS - PART 2
CEI EN 60974-1 : 2013 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES
MIL-B-87986 Base Document:1989 BEAD BREAKER, PNEUMATIC TIRE
IEC 60445 REDLINE : 6ED 2017 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
SCTE 74 : 2011 SPECIFICATION FOR BRAIDED 75 OHM FLEXIBLE RF COAXIAL DROP CABLE
NFPA 43B : 1993 STORAGE OF ORGANIC PEROXIDE FORMULATIONS
SAE J 2990 : 2012 HYBRID AND EV FIRST AND SECOND RESPONDER RECOMMENDED PRACTICE
C22.10-10 Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments
CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API MPM CH7 : 2001 : R2012 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION
API 685 REDLINE : 2011 SEALLESS CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL, AND GAS INDUSTRY PROCESS SERVICE
API 2031 : 1991 COMBUSTIBLE GAS DETECTOR SYSTEMS AND ENVIRONMENTAL OPERATIONAL FACTORS INFLUENCING THEIR PERFORMANCE
MIL-W-80211 Revision C:1990 WELDING MACHINE, (MICROWELDER), RESISTANCE, STORED ENERGY, CONSTANT VOLTAGE, LOW IMPEDANCE SOURCE, BENCH MOUNTED
IEEE DRAFT 841 : MARCH 2000 DRAFT STANDARD FOR PETROLEUM AND CHEMICAL INDUSTRY - SEVERE DUTY TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KV (500HP)
ASTM F 2834 : 2010 Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
PD ISO/TS 18683:2015 Guidelines for systems and installations for supply of LNG as fuel to ships
ANSI/ASSE A10.10 : 2014 SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES
API 54 RUSSIAN : 19991 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
UNE-EN 60695-1-40:2014 Fire hazard testing - Part 1-40: Guidance for assessing the fire hazard of electrotechnical products - Insulating liquids
NACE RP 06 75 : 1988 CORROSION CONTROL OF OFFSHORE STEEL PIPELINES
PD IEC/TR 62655:2013 Tutorial and application guide for high-voltage fuses
GG-S-1340 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
API 49 : 2001 : R2013 RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE
MIL-PRF-12048 Revision E:1998 PETROLEUM TESTING KIT, GROUND FUELS
14/30267384 DC : 0 BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS
CAN/CSA-C22.2 NO. 60950-22:17 Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22)
API 2003 : 2015 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
MIL-PRF-83990 Revision A:1997 OVEN, THERMAL DRYING, ELECTRIC
F-B-2902 Base Document:1990 BOILERS, STEAM WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
ANSI Z83.15 : 1994 GAS FOOD SERVICE EQUIPMENT - KETTLES, STEAM COOKERS AND STEAM GENERATORS
ANSI B11.7 : 1995 COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
API GIRE CH14 : 3ED 82 ELECTRICAL SYSTEMS
MIL-W-80121 Revision B:1987 WELDING MACHINE, ELECTRICAL RESISTANCE SPOT, PORTABLE TYPE, SINGLE PHASE
ANSI B11.9:2010 SAFETY REQUIREMENTS FOR GRINDING MACHINES
ICC IPMC CODE AND COMMENTARY : 2015 2015 INTERNATIONAL PROPERTY MAINTENANCE CODE & COMMENTARY
MIL-F-28675 Revision B:1985 FITTINGS, CONDUIT, EXPLOSION PROOF (COUPLINGS, SEALS, UNIONS, ELBOWS)
SCTE 129 : 2017 DROP PASSIVES: BONDING BLOCKS (WITHOUT SURGE PROTECTION)
BS EN 60445:2017 Basic and safety principles for man-machine interface, marking and identification. Identification of equipment terminals, conductor terminations and conductors
NFPA 50A : 1999 GASEOUS HYDROGEN SYSTEMS AT CONSUMER SITES
MIL-B-26994 Revision E:1992 BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE
MIL-M-80016 Revision C:1988 MILLING MACHINE, VERTICAL, SWIVEL HEAD, KNEE AND COLUMN, RAM AND TURRET TYPE
08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
NFPA 33 FRENCH : 1995 SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS
MIL-DTL-22612 Revision D:2015 DETECTOR, COMBINED CONTAMINATED FUEL
RMA B28.7 : 1983 TAKEOFF EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
MIL-B-45081 Revision E:1991 BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR
MIL-PRF-38715 Revision B:1996 INDICATOR, COMBUSTIBLE GAS AND OXYGEN
API 681 : 1996 : R2010 LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL-L-44142 Revision A:1986 LAUNDRY UNIT, TRAILER MOUNTED
UFC 1-201-02 : 2014 UNIFIED FACILITIES CRITERIA - ASSESSMENT OF EXISTING FACILITIES FOR USE IN MILITARY OPERATIONS
ANSI B24.1 : 1985 FORGING MACHINERY, SAFETY REQUIREMENTS FOR,
UFC 1-202-01 : 2013 UNIFIED FACILITIES CRITERIA - HOST NATION FACILITIES IN SUPPORT OF MILITARY OPERATIONS
API MPM CH7 : 2001 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION
SCTE 100 : 2010 SPECIFICATION FOR 75 OHM SMOOTH ALUMINUM SUBSCRIBER ACCESS CABLE
ANSI B11.9 : 2010(R2015) SAFETY REQUIREMENTS FOR GRINDING MACHINES
ANSI B11.13 : 1992 MACHINE TOOLS - SINGLE AND MULTIPLE SPINDLE, AUTOMATIC SCREW/BAR AND CHUCKING MACHINES - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE AND USE
MIL-S-26716 Revision A:1982 STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE
GGG-S-630 Revision D:1986 SPREADERS, TIRE, PNEUMATICALLY OPERATED
API 55 : 1995 : R2013 RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE
MIL-D-44144 Revision A:1986 DRYING TUMBLER, LAUNDRY
MIL-W-80192 Revision C:1989 WELDING MACHINE, RESISTANCE, SPOT AND SEAM, METAL FOIL, SINGLE PHASE, PORTABLE
NFPA 409 : 2016 AIRCRAFT HANGARS
NFPA 40E : 1993 STORAGE OF PYROXYLIN PLASTICS
SAE AIR 6284 : 2015 FORCED AIR OR FORCED AIR/FLUID EQUIPMENT FOR REMOVAL OF FROZEN CONTAMINANTS
NFPA 43A : 1990 STORAGE OF LIQUID AND SOLID OXIDIZERS
AAMI ST50 : 2004 DRY HEAT (HEATED AIR) STERILIZERS
MIL HDBK 1028/3 : 0 MAINTENANCE FACILITIES FOR AMMUNITION, EXPLOSIVES AND TOXINS
ANS 54.8 : 1988 LIQUID METAL FIRE PROTECTION IN LMR PLANTS
CSA C22.2 No. 45.1 :2007 ELECTRICAL RIGID METAL CONDUIT - STEEL
ANSI Z21.21 : 2015 AUTOMATIC VALVES FOR GAS APPLIANCES
10/30214867 DC : 0 BS EN ISO 21049 - PUMPS - SHAFT-SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
OO-M-340 Revision F:2004 MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT
UFC 4-730-10 : 2006 UNIFIED FACILITIES CRITERIA - FIRE STATIONS
IEEE 422-2012 IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
IEEE DRAFT C57.12.01 : D6 2005 GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS INCLUDING THOSE WITH SOLID-CAST AND/OR RESIN ENCAPSULATED WINDINGS
MIL-S-29411 Revision B:1988 SHELTER ASSEMBLIES, 10 FOOT AND 20 FOOT ELECTROMAGNETIC INTERFERENCE
API 2009 : 2002 SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES
A-A-661 Revision A:1986 ENGRAVING MACHINE, PANTOGRAPH, TRACER GUIDED
API 55 :1995 RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE
MIL-STD-188-124 Revision B:1992 GROUNDING BONDING AND SHIELDING FOR COMMON LONG HAUL TACTICAL COMMUNICATION SYSTEMS INCLUDING GROUND BASED COMMUNICATIONS ELECTRONICS FACILITIES & EQUIPMENTS
MIL-T-28691 Base Document:1991 TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 65 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER
API 2RD : 2013 DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
MIL-A-28768 Revision B:1984 ANTENNA, FIXED HF, GENERAL SPECIFICATION FOR
ANSI/ASSE A10.27 : 1998 : R2011 SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES
UFC 3-580-01 : Change 1 UNIFIED FACILITIES CRITERIA - TELECOMMUNICATIONS INTERIOR INFRASTRUCTURE PLANNING AND DESIGN
02/705659 DC : DRAFT APR 2002 ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 674 : 2010(R2016) POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
API 675 : 2012 POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
MIL-A-28772 Revision C:1984 ANTENNA, HF, FIXED ROTATABLE LOG PERIODIC
UFC 3-430-11 : 2001 UNIFIED FACILITIES CRITERIA - BOILER CONTROL SYSTEMS
MIL-W-80087 Revision C:1986 WELDING MACHINE, ELECTRICAL RESISTANCE, SPOT, ROCKER ARM, AIR OPERATED, THREE PHASE
API 552 : 1994 TRANSMISSION SYSTEMS
MIL-S-64055 Base Document:1994 SHOP EQUIPMENT, MECHANICAL MAINTENANCE, SHELTER MOUNTED, EXPANDABLE
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
ANSI B11.8:2001(R2012) SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
ANSI B11.12 : 2005 : R2015 SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES
IEEE C57.152-2013 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
ANSI Z83.18 : 2017 RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS
ANSI Z83.26 : 2014 GAS-FIRED OUTDOOR INFRARED PATIO HEATERS
ANSI Z83.4-2017/CSA 3.7-2017 NON-RECIRCULATING DIRECT GAS-FIRED HEATING AND FORCED VENTILATION APPLIANCES FOR COMMERCIAL AND INDUSTRIAL APPLICATION
ANSI/ASSE A10.17 : 2006 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
NFPA 907M : 1988 MANUAL FOR THE DETERMINATION OF ELECTRICAL FIRE CAUSES
ANSI B11.6 : 2001 : R2007 SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
UFC 4-211-01N : Change 3 UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS: TYPE 1, TYPE 2 AND TYPE 3
UL 1112:3ED 1997-09 Standard for Marine Electric Motors and Generators (Cranking, Outdrive Tilt, Trim Tab, Generators, Alternators)
FED-STD-807 Revision M:2005 TRUCKS: HEAVY COMMERCIAL, 6X4 AND 6X6 19,500 TO 30,000 KG (43,000 TO 66,000 LBS) GVWR
SCTE 226 : 2015 CABLE FACILITY CLASSIFICATION DEFINITIONS AND REQUIREMENTS
ASTM F 1764 : 1997 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
ASTM D 7877 : 2014 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
MIL-DTL-2036 Revision E:2014 ENCLOSURES FOR ELECTRIC AND ELECTRONIC EQUIPMENT, NAVAL SHIPBOARD
NFPA 50 : 2001 BULK OXYGEN SYSTEMS AT CONSUMER SITES
ANSI Z21.94 : 2006 : INC : ADD A : 2007 : R2016 AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS
IEEE C37.13.1-2006 IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear
ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2017 GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION)
CSA C22.2 No. 254 : 2005(R2015) MOTOR CONTROL CENTRES
API 2T REDLINE : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
SAE J 2847/3 : 2013 COMMUNICATION FOR PLUG-IN VEHICLES AS A DISTRIBUTED ENERGY RESOURCE
ANSI Z21.40.2 : 1996 : INC : ADD A : 1997 : R2012 GAS-FIRED, WORK ACTIVATED AIR-CONDITIONING AND HEAT PUMP APPLIANCES (INTERNAL COMBUSTION)
C22.2 NO. 45.1-07 (R2017) Electrical Rigid Metal Conduit - Steel (Tri-National standard, with UL 6 and NMX-J-534-ANCE-2007)
C22.2 NO. 18.1-13 (R2018) Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1)
CSA C22.2 No. 256 : 2014 DIRECT PLUG-IN NIGHTLIGHTS
ANSI Z21.19 : 2014 REFRIGERATORS USING GAS FUEL
C22.2 NO. 213-17 Nonincendive electrical equipment for use in Class I and II, Division 2 and Class III, Divisions 1 and 2 hazardous (classified) locations (Binational standard with UL 121201)
CSA T568.2 : 2005 : R2010 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR CABLING COMPONENTS
C22.2 NO. 38-18 THERMOSET-INSULATED WIRES AND CABLES
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2016 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
ANSI Z21.84-2017 Manually lighted, natural gas, decorative gas appliances for installation in solid-fuel burning appliances
CSA C22.2 NO. 60947-4-1:14 (R2019) Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters ( Bi-national standard, with UL 60947-4-1)
ANSI Z21.78 : 2010 COMBINATION GAS CONTROLS FOR GAS APPLIANCES
CSA C22.2 No. 167 : 2017 HOUSEHOLD DISHWASHERS
IEEE C57.159-2016 IEEE Guide on Transformers for Application in Distributed Photovoltaic (DPV) Power Generation Systems
ANSI Z21.94 : 2006 AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS
CSA C22.2 No. 45.1 : 2007 : INC : UPD 2 : 2014 : R201200 ELECTRICAL RIGID METAL CONDUIT - STEEL
ANSI Z21.60-2017/CSA 2.26-2017 DECORATIVE GAS APPLIANCES FOR INSTALLATION IN SOLID-FUEL BURNING FIREPLACES
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2012 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
ANSI B151.6 : 1982 AMERICAN NATIONAL STANDARD FOR PLASTICS MACHINERY - SLIT TAPE AND MONOFILAMENT POSTEXTRUSION EQUIPMENT - CONSTRUCTION, CARE AND USE
CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
CSA C22.2 No. 63 : 1993 : R2013 HOUSEHOLD REFRIGERATORS AND FREEZERS
CSA C22.2 No. 199 : 2007 : R2011 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
API STD 676 : 2009 POSITIVE DISPLACEMENT PUMPS - ROTARY
SAE ARP 1247 : 2018 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS
API 682 CHINESE : 2014 PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS
API 2N : 2015 PLANNING, DESIGNING, AND CONSTRUCTING STRUCTURES AND PIPELINES FOR ARCTIC CONDITIONS
API 2C : 2012 OFFSHORE PEDESTAL-MOUNTED CRANES
IEEE 45.1-2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
NFPA 1917 : 2016 AUTOMOTIVE AMBULANCES
SAE J 2891 : 2015 AUXILIARY POWER UNIT ELECTRICAL INTERFACE REQUIREMENTS FOR CLASS EIGHT TRUCKS
CSA B44.1 : 2014 ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT
CSA C22.2 No. 60745-2-15 : 2010 : INC : UPD 1 : 2011 HAND-HELD MOTOR OPERATED ELECTRIC TOOLS - SAFETY - PART 2-15: PARTICULAR REQUIREMENTS FOR HEDGE TRIMMERS
API 49 RUSSIAN : 2001 : R2007 RECOMMENDED PRACTICE FOR DRILLING AND WELL SERVICING OPERATIONS INVOLVING HYDROGEN SULFIDE
CSA 6.31 : 2006 : INC : ADD A : 2007 : R2016 AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS
NFPA 490 : 2002 CODE FOR THE STORAGE OF AMMONIUM NITRATE
API 2008 : 4ED 84 SAFE OPERATION OF INLAND BULK PLANTS
ASTM E 2542 : 2008 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
IEEE 1844-2015 IEEE Standard Test Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities
ANSI A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
NFPA 72F : 1985 INSTALLATION, MAINTENANCE, AND USE OF EMERGENCY VOICE/ALARM COMMUNICATION SYSTEMS
API 681 : 1996 LIQUID RING VACUUM PUMPS AND COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
CSA C22.2 No. 2515 : 2009 : R2014 ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
API 674 : 2010 : ERR 2 : 2015 POSITIVE DISPLACEMENT PUMPS - RECIPROCATING
API 676 : 2009 : R2015 POSITIVE DISPLACEMENT PUMPS - ROTARY
ASAE EP342.2 : 1995(R1999) SAFETY FOR ELECTRICALLY HEATED LIVESTOCK WATERERS
ANSI Z21.5.2 : 2016 GAS CLOTHES DRYERS, VOLUME 2, TYPE 2 CLOTHES DRYERS
API 610 REDLINE : 2010 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
NFPA 480 : 1998 STORAGE, HANDLING, AND PROCESSING OF MAGNESIUM SOLIDS AND POWDERS
ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
CSA 12.5 : 1999 : R2004 NGV DISPENSING SYSTEMS
SAE J 3068 :2018 ELECTRIC VEHICLE POWER TRANSFER SYSTEM USING A THREE-PHASE CAPABLE COUPLER
EEMUA 209 : 2015 GUIDE TO THE DEVELOPMENT AND IMPLEMENTATION OF ON-LINE ANALYSER APPLICATIONS
ASTM E 2513 : 2007 : R2012 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
API 11S5 : 2008 RECOMMENDED PRACTICE FOR THE APPLICATION OF ELECTRICAL SUBMERSIBLE CABLE SYSTEMS
API 554-2 : 2008 : R2016 PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN
SCTE 184 : 2015 SCTE ENERGY MANAGEMENT OPERATIONAL PRACTICES FOR CABLE FACILITIES
ANSI Z83.20-2016/CSA 2.34-2016 Gas-fired tubular and low-intensity infrared heaters
CSA 6.31 : 2006 : INC : ADD A : 2007 : R2011 AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS
CSA 6.31 : 2006 AUTOMATIC FLAMMABLE VAPOR SENSOR SYSTEMS AND COMPONENTS
IEEE 1526-2003 IEEE Recommended Practice for Testing the Performance of Stand-Alone Photovoltaic Systems
NFPA 350 : 2016 SAFE CONFINED SPACE ENTRY AND WORK
NFPA 414 : 2017 AIRCRAFT RESCUE AND FIRE-FIGHTING VEHICLES
IEEE C57.12.50 : 1981 REQUIREMENTS FOR VENTILATED DRY-TYPE DISTRIBUTION TRANSFORMERS, 1 TO 500 KVA, SINGLE-PHASE, AND 15 TO 500 KVA, THREE-PHASE, WITH HIGH-VOLTAGE 601 TO 34500 VOLTS, LOW-VOLTAGE 120 TO 600 VOLTS
ISA TR12.06.01 : 1999 ELECTRICAL EQUIPMENT IN A CLASS 1, DIVISION 2/ZONE 2 HAZARDOUS LOCATION
IEEE 1184-2006 IEEE Guide for Batteries for Uninterruptible Power Supply Systems
IEEE C37.121-2012 GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
IEEE 1205-2014 IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 979-2012 IEEE Guide for Substation Fire Protection
ANSI/ASSP A10.9:2013 SAFETY REQUIREMENTS FOR CONCRETE AND MASONRY WORK - AMERICAN NATIONAL STANDARD FOR CONSTRUCTION AND DEMOLITION OPERATIONS
AWS D1.6 : 1999 ERRATA 1999 STRUCTURAL WELDING CODE - STAINLESS STEEL
IEEE DRAFT 1562 : D8 2006 ARRAY AND BATTERY SIZING IN STAND-ALONE PHOTOVOLTAIC SYSTEMS
CSA C22.2 No. 42-1 : 2013 COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES
ANSI/AIHA/ASSP Z9.9-2010 PORTABLE VENTILATION SYSTEMS
C22.2 NO. 2459-08 (R2017) Insulated multi-pole splicing wire connectors (Bi-national standard, with UL 2459)
CSA C22.2 No. 2459 : 2008 : R2013 INSULATED MULTI-POLE SPLICING WIRE CONNECTORS
NFPA 81 : 1986 FUR STORAGE, FUMIGATION AND CLEANING
IEEE 463-2013 REDLINE IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
ANSI/ASSE A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
ANSI A10.16 REDLINE : 2009 COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009)
ANSI/ASSE A10.22 : 2007 : R2012 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
IEEE DRAFT 848 : D17 JAN 96 DRAFT STANDARD PROCEDURE FOR THE DETERMINATION OF THE AMPACITY DERATING OF FIRE PROTECTED CABLES
API 54 : 1999 : R2013 RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS
AIHA Z9.3 : 2007 SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION
C22.2 NO. 182.1-17 Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682)
S.R. HD 60364-5-52:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-52: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - WIRING SYSTEMS
NFPA 97 : 2003 GLOSSARY OF TERMS RELATING TO CHIMNEYS, VENTS, AND HEAT-PRODUCING APPLIANCES
ANSI/ASSE A10.6 : 2006 SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS
ANSI/ASSE Z117.1 : 2009 SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES
ANSI/ASSE A10.10 : 2014 SAFETY REQUIREMENTS FOR TEMPORARY AND PORTABLE SPACE HEATING DEVICES
CSA C22.2 No. 18-4 : 2004 : R2009 : FR HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE
IEC 60974-1:2017 Arc welding equipment - Part 1: Welding power sources
CSA C22.2 No. 178.1 : 2014 TRANSFER SWITCH EQUIPMENT
NFPA 1904 : 1991 AERIAL LADDER AND ELEVATING PLATFORM FIRE APPARATUS
NSF 40 : 2013 RESIDENTIAL WASTEWATER TREATMENT SYSTEMS
IEEE C37.123-1996 IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
AAMI ST27 : 1988 GUIDELINE FOR INDUSTRIAL ETHYLENE OXIDE STERILIZATION OF MEDICAL DEVICES - PROCESS DESIGN, VALIDATION, ROUTINE STERILIZATION AND CONTRACT STERILIZATION
ASCE T&DI 21.3 : 2008 AUTOMATED PEOPLE MOVER STANDARDS - PART 3
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
NSF 350 : 2014 ONSITE RESIDENTIAL AND COMMERCIAL WATER REUSE TREATMENT SYSTEMS
NASA KSC SPEC E 0021 : 1996 AC POWER CABLE, INTERLOCKED-ARMORED, 600-VOLT, 60-HERTZ, PROCUREMENT OF, SPECIFICATION FOR
FM 3232 : 2011 VIDEO IMAGE FIRE DETECTORS FOR AUTOMATIC FIRE ALARM SIGNALING
NSF 46 : 2017 EVALUATION OF COMPONENTS AND DEVICES USED IN WASTEWATER TREATMENT SYSTEMS
NFPA 22 : 2018 WATER TANKS FOR PRIVATE FIRE PROTECTION
IEEE C62.92.2-1989 IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems
MSS SP 116 : 2014 SERVICE-LINE VALVES AND FITTINGS FOR DRINKING WATER SYSTEMS
IEEE 802.3-2012 IEEE Standard for Ethernet
ASCE 24 98 : 2000 FLOOD RESISTANCE DESIGN AND CONSTRUCTION
ASCE 21 00 : 2002 AUTOMATED PEOPLE MOVER STANDARDS - PART 3
IEEE 1695-2016 IEEE Guide to Understanding, Diagnosing, and Mitigating Stray and Contact Voltage
NFPA 1452 : 2015 TRAINING FIRE SERVICE PERSONNEL TO CONDUCT COMMUNITY RISK REDUCTION
ASTM F 2202 : 2002 Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
ASAE EP294.2 : 1998 COMPUTING ELECTRICAL DEMANDS FOR FARMS
ASTM F 2970 : 2017 : REDLINE Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
HI 1.3 : 2013 ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION
API 612 : 2014 PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
ANSI MH24.1 : 2005 SAFETY STANDARD FOR HORIZONTAL CAROUSEL MATERIAL HANDLING AND ASSOCIATED EQUIPMENT
RMA B28.8 : 1983 RUBBER MACHINERY - WINDUP EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE AND USE
ABS 0057 : 2017 COR 2017 GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS
ASTM F 2319 : 2004 Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances (Withdrawn 2013)
IEEE DRAFT 602 : D2 2006 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
ASTM F 1602 : 2012 : R2017 Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
CSA C22.2 No. 198.1 : 2006 EXTRUDED INSULATING TUBING
CSA 6.26 : 2018 FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING
ASCE 24 05 : 2006 FLOOD RESISTANT DESIGN AND CONSTRUCTION
ISO/TR 14799-2:2015 Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments
API 1626 : 2010 STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS
API 340 : 1997 LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 1615 : 2011 INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS
API 2610:2005 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
ASME A17.1-2016/CSA B44-16 Safety code for elevators and escalators (Bi-national standard, with ASME A17.1)
NSF 50 : 2016 EQUIPMENT FOR SWIMMING POOLS, SPAS, HOT TUBS AND OTHER RECREATIONAL WATER FACILITIES
I.S. EN ISO 13709:2009 CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
ANSI/CSA-B149.6-15 Code for digester gas, landfill gas, and biogas generation and utilization
IEEE 242-2001 IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book)
IEEE C62.34 : 1996 TEST METHODS AND PERFORMANCE OF LOW-VOLTAGE (1000 V RMS OR LESS) SURGE PROTECTIVE DEVICES USED ON SECONDARY DISTRIBUTION SYSTEMS (BETWEEN THE TRANSFORMER LOW-VOLTAGE TERMINALS AND THE LINE SIDE OF THE SERVICE EQUIPMENT)
IEEE 1147-2005 IEEE Guide for the Rehabilitation of Hydroelectric Power Plants
IEEE 45.3-2015 IEEE Recommended Practice for Shipboard Electrical Installations -- Systems Engineering
CSA C22.2 No. 104:2011 HUMIDIFIERS
13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
ISO 10437:2003 Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
UL 121201:9ED 2017-09 Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
09/30193524 DC : 0 BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY
ISO 13710:2004 Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps
NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
BS ISO 19372:2015 Microturbines applications. Safety
CAN/CSA-C22.2 No. 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
UL 514D:2ED 2013-06 Cover Plates for Flush-Mounted Wiring Devices
BS EN ISO 10438-1:2003 Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements
IEEE C62.43.0-2017 IEEE Guide for Surge Protectors and Protective Circuits Used in Information and Communications Technology Circuits, Including Smart Grid Data Networks--Overview
BS EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps
ISO 13705:2012 Petroleum, petrochemical and natural gas industries — Fired heaters for general refinery service
ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
UL 1008A:2ED 2017-09 Transfer Switch Equipment, Over 1000 Volts
ASTM F 1323 : 2014 : REDLINE Standard Specification for Shipboard Incinerators
UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
PD ISO/TR 14799-2:2005 Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments
IEC TR 62368-2:2015 Audio/video, information and communication technology equipment - Part 2: Explanatory information related to IEC 62368-1
IEC TR 62222:2012 Fire performance of communication cables installed in buildings
ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors
IEEE 1185-2010 IEEE Recommended Practice for Cable Installation in Generating Stations and Industrial Facilities
CSA C22.2 NO. 178.3:17 Transfer switch equipment, over 1000 volts (Binational standard with UL 1008A)
BS ISO 13577-2:2014 Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems
CSA B45.10 : 2012 HYDROMASSAGE BATHTUB SYSTEMS
CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500 HUMIDIFIERS
ANSI/ASSE A10.8 REDLINE : 2011 COMPARISON DOCUMENT OF A10.8 AMERICAN NATIONAL STANDARD - SCAFFOLDING SAFETY REQUIREMENTS (FOR VERSIONS 2001 AND 2011)
EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009)
EN ISO 10438-1:2007 Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007)
EN ISO 10437:2003 Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003)
EI 1598 : 2012 DESIGN, FUNCTIONAL REQUIREMENTS AND LABORATORY TESTING PROTOCOLS FOR ELECTRONIC SENSORS TO MONITOR FREE WATER AND/OR PARTICULATE MATTER IN AVIATION FUEL
EI 1540 : 2014 DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES
EI MODEL CODE SAFE PRACTICE PT7 : 1998 DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES
EN ISO 10439-1:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015)
EN ISO 21049:2004 Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
EN ISO 19906:2010 Petroleum and natural gas industries - Arctic offshore structures (ISO 19906:2010)
EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007)
EN ISO 13710:2004 Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004)
EN ISO 13705:2012 Petroleum, petrochemical and natural gas industries - Fired heaters for general refinery service (ISO 13705:2012)
IEEE 1361-2014 IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
FM 5700 : 2018 EXPLOSION SUPPRESSION SYSTEMS
I.S. EN 60974-1:2012 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012 (EQV))
API 2005 : 1996 SERVICE STATION SAFETY
API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
ASAE EP473 : 1994 EQUIPOTENTIAL PLANE IN ANIMAL CONTAINMENT AREAS
SAE ARP 5818 : 2015 AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS
NACE SP 01 77 : 2014 MITIGATION OF ALTERNATING CURRENT AND LIGHTNING EFFECTS ON METALLIC STRUCTURES AND CORROSION CONTROL SYSTEMS
MIL-W-45844 Revision D:1987 WELDING MACHINE, RESISTANCE, SPOT & TYPE PORTABLE (AUTOMOTIVE REPAIR)
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
UNE-EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
A-A-59618 Base Document:2002 Cleaner, Pressure, Hot-Water, Skid-Mounted
MIL-PRF-32531 Base Document:2015 FLUORESCENT PENETRANT INSPECTION (FPI) UNITS, SEPARATE MODULAR STATION TYPES
IEEE 1683-2014 IEEE Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical Hazards
MIL-PRF-43001 Revision G:2016 WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL
F-S-2911 Base Document:1997 STOKERS, MECHANICAL - FOR PACKAGED BOILERS FIRED ON COAL OR A COMBINATION OF COAL-GAS, COAL-OIL, OR COAL-GAS-OIL (2,000 TO 50,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
GGG-S-58 Revision F:1993 Saw, Radial Overarm, Woodworking (No S/S Document)
MIL G 45006 : F NOTICE 1 GRINDING MACHINE, CRANKSHAFT
MIL-HDBK-232 Revision A:1987 RED/BLACK ENGINEERING-INSTALLATION GUIDELINES
ANSI A10.7 REDLINE : 2011 COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011)
MIL-C-10541 Revision D:1978 COOLING UNIT, STEREOPLOTTER PROJECTION
MIL-M-29190 Revision A:1986 MONITORING DEVICES, EMISSION, STACK RELATED
RMA B28.6 : 1983 REINFORCING MACHINERY FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
ISA 12.12.03 : 2011 STANDARD FOR PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
API RP 1004:2003 BOTTOM LOADING AND VAPOR RECOVERY FOR MC-306 & DOT-406 TANK MOTOR VEHICLES
MIL-W-80187 Revision A:1985 WELDING MACHINE, ULTRASONIC BONDING, MINIATURE WIRE
API 555 : 2013 PROCESS ANALYZERS
AIHA Z9.4 : 2011 ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES
NFPA 501D : 1996 RECREATIONAL VEHICLE PARKS AND CAMPGROUNDS
CSA HGV 4.4 : 2013(R2018) STANDARD FOR BREAKAWAY DEVICES FOR COMPRESSED HYDROGEN DISPENSING HOSES AND SYSTEMS
MIL-B-17095 Revision H:1990 BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
ICC ICCPC INTERNATIONAL PERFORMANCE CODE : 2015 ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES
ANSI/ASA S12.15 : 1992(R2016) FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED
ASTM F 860 : 2007 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
ASTM F 1764 : 1997 : R2002 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
UFC 4-610-01 : Change 2 UNIFIED FACILITIES CRITERIA - ADMINISTRATIVE FACILITIES
IEEE 515-2011 IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications
NFPA 30B : 2015 CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS
IEEE 1036-2010 IEEE Guide for the Application of Shunt Power Capacitors
GR 295 CORE : ISSUE 1 ISOLATED AND MESH BONDING NETWORKS: DEFINITION AND APPLICATION TO TELEPHONE CENTRAL OFFICES
NFPA 115 : 2016 LASER FIRE PROTECTION
ASTM F 1603 : 2017 : REDLINE Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
MIL-DTL-22342 Revision E:1995 BROWS, ALUMINIUM, BEAM AND TRUSS
MIL-B-43998 Revision D:1992 BATH UNIT, AUTOMATED, MULTI-HEAD
ANSI Z21.58-2018/CSA 1.6-2018 Outdoor cooking gas appliances
MIL-HDBK-1024-1 Base Document:1994 AVIATION OPERATIONAL AND SUPPORT FACILITIES
AWS C7.2 : 1998 RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING AND DRILLING
ANSI/IES RP-29 : 2016 LIGHTING FOR HOSPITALS AND HEALTH CARE FACILITIES
API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
11/30246055 DC : 0 BS EN ISO 13705 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FIRED HEATERS FOR GENERAL REFINERY SERVICE
API MPM CH7 : 2001 : INC : ADD 2 : 2017 MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION
MIL-B-40611 Revision C:1972 BAGGING MACHINE, FRUIT AND PRODUCE
MIL D 45582 : B DESOLDERING & RESOLDERING KITS, ELECTRIC
API 55 : 1995 : R2007 RECOMMENDED PRACTICE FOR OIL AND GAS PRODUCING AND GAS PROCESSING PLANT OPERATIONS INVOLVING HYDROGEN SULFIDE
MIL-W-80253 Revision B:1990 WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, SINGLE PHASE
09/30171555 DC : DRAFT SEP 2009 BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS
ALI B153.1 : 1990 CONSTRUCTION, CARE, AND USE OF AUTOMOTIVE LIFTS, SAFETY REQUIREMENTS FOR,
NFPA 601 : 2015 SECURITY SERVICES IN FIRE LOSS PREVENTION
API 99 : 2014 FLASH FIRE RISK ASSESSMENT FOR THE UPSTREAM OIL AND GAS INDUSTRY
ANSI E1.43 : 2016 ENTERTAINMENT TECHNOLOGY - PERFORMER FLYING SYSTEMS
IEEE C37.17-2012 IEEE Standard for Trip Systems for Low-Voltage (1000 V and below) AC and General Purpose (1500 V and below) DC Power Circuit Breakers
API 680 : 1ED 87 PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES
ANSI B28.1 : 2017 SAFETY SPECIFICATIONS FOR MILLS AND CALENDERS IN THE RUBBER INDUSTRY
GGG-B-175 Revision A:1987 BENDER, ELECTRICAL CONDUIT, HAND (PORTABLE)
ASTM F 2876 : 2010 : R2015 Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
I.S. EN 60079-30-1:2017 EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS
GG-S-1343 Revision A:1975 STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE)
IEEE 649-2006 IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations
ASTM F 860 : 2007 : R2013 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
ASAE EP329 : 2001 SINGLE-PHASE RURAL DISTRIBUTION SERVICE FOR MOTORS AND PHASE CONVERTERS
ANSI B152.2 : 1982 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE AND USE OF PERMANENT-MOLD CASTING MACHINES (OTHER THAN GRAY IRON)
ASAE S354.3 : 1995 AGRICULTURAL EQUIPMENT - SAFETY FOR FARMSTEAD EQUIPMENT
MIL-W-80256 Revision A:1987 WELDING MACHINES, ELECTRICAL, RESISTANCE, SPOT, PRESS TYPE, AIR OPERATED, SINGLE PHASE
MIL-W-80070 Revision D:1987 WELDING MACHINE, ELECTRICAL, RESISTANCE, SPOT, ROCKER, ARM, SINGLE PHASE
UFC 4-213-10 : Change 1 UNIFIED FACILITIES CRITERIA - DESIGN: GRAVING DRYDOCKS
ANSI Z117.1 REDLINE : 2009 COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009)
UL 1128:3ED 1997-09 Standard for Marine Blowers
NSF 350-1 : 2017 ONSITE RESIDENTIAL AND COMMERCIAL GRAYWATER TREATMENT SYSTEMS FOR SUBSURFACE DISCHARGE
MIL-F-44402 Base Document:1990 FINISHING SECTION, MODULAR PRINTING SYSTEM
API 11S5 : 2008 : R2013 RECOMMENDED PRACTICE FOR THE APPLICATION OF ELECTRICAL SUBMERSIBLE CABLE SYSTEMS
MIL-I-2220 Revision C:1991 INSTRUMENT, ELECTRICAL MEASURING, HYDROGEN GAS INDICATING, NONPORTABLE,[SUBMARINE USE]
14/30267605 DC : 0 BS EN 60079-30-2 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN; INSTALLATION AND MAINTENANCE
MIL-W-80124 Revision C:1987 WELDING MACHINE (MICROWELDER), RESISTANCE, SINGLE PHASE, BENCH MOUNTED
NFPA 68 : 2018 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
MIL-A-29521 Base Document:1988 ANTENNA GROUP, AN/BRA-34(V), AN/BRA-34A(V), AN/BRA-34B(V)
ANSI B11.11 : 2001 : R2012 SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
CSA M688 : 2010 : FR PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY
CSA T568.3 : 2005 : R2010 OPTICAL FIBER CABLING COMPONENTS STANDARD
IEEE C62.92.4-2014 REDLINE IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part IV: Distribution
UFC 3-570-01 : 2016 UNIFIED FACILITIES CRITERIA (UFC) - CATHODIC PROTECTION
A-A-52213 Base Document:1997 BATH UNIT, PORTABLE, FOUR SHOWERHEADS
NFPA 72D : 1986 INSTALLATION, MAINTENANCE, AND USE OF PROPRIETARY PROTECTIVE SIGNALING SYSTEMS
NFPA 73 : 2016 ELECTRICAL INSPECTIONS FOR EXISTING DWELLINGS
ANSI Z21.71:1993 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
GG-S-1344 Revision A:0197 STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE)
MIL-P-52307 Revision B:1992 PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH)
C22.2 NO. 214-17 Communications cables (Bi-national standard, with UL 444)
CSA 1.6 : 2018 OUTDOOR COOKING GAS APPLIANCES
API 554-2 : 2008 PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN
UFC 4-730-01 : Change 1 UNIFIED FACILITIES CRITERIA - FAMILY SERVICE CENTERS
API 74 : 2001 : R2013 RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION
ANSI NGV4.8 : 2012 : R2016 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
ANSI E1.6-1 : 2012 ENTERTAINMENT TECHNOLOGY - POWERED HOIST SYSTEMS
CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 2420 : 2009 BELOWGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS
AWWA C542 : 2016 ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES
ANSI Z21.71 : 1993 : INC : ADD A : 2005 : R2012 AUTOMATIC INTERMITTENT PILOT IGNITION SYSTEMS FOR FIELD INSTALLATION
CSA 12.8 : 2002 : R2016 STANDARD FOR NATURAL GAS VEHICLE FUELING STATION RECIPROCATING COMPRESSOR GUIDELINES
ANSI Z83.19-2017/CSA 2.35-2017 Gas-fired high-intensity infrared heaters
ANS 57.2 : 1983 LIGHT WATER REACTOR SPENT FUEL STORAGE FACILITIES, REQUIREMENTS FOR,
ASTM F 1202 : 2016 : REDLINE Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
MIL-S-52330 Revision E:1993 SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED
ANSI/ASSE A10.27 : 1998 : R2005 SAFETY REQUIREMENTS FOR HOT MIX ASPHALT FACILITIES
ANSI B169.1 : 1990 SAFETY REQUIREMENTS FOR THE CONSTRUCTION, CARE, AND USE OF MACHINERY USED IN ENVELOPE MANUFACTURING
MIL-DTL-52849 Revision E:2008 TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE)
ISA 7.0.01 : 1996 QUALITY STANDARD FOR INSTRUMENT AIR
ASTM F 1764 : 1997 : R2018 Standard Guide for Selection of Hardline Communication Systems for Confined-Space Rescue
API 616 REDLINE : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
CSA C22.2 No. 45.1 : 2007 : INC : UPD 1 : 2010 : R2012 ELECTRICAL RIGID METAL CONDUIT - STEEL
ANSI Z21.40.1 : 1996 : INC : ADD A : 1997 : R2012 GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES
NFPA 56 (PS) : 2012 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
ANSI Z21.92 :2001 MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS
CSA C22.2 No. 199 :2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
ANSI Z21.47 : 2016 GAS-FIRED CENTRAL FURNACES
C22.2 NO. 243-17 Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017)
IEEE C37.17-2012 TRIP DEVICES FOR AC AND GENERAL PURPOSE DC LOW VOLTAGE POWER CIRCUIT BREAKERS
CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017 METALLIC OUTLET BOXES
NFPA 484 : 2015 COMBUSTIBLE METALS
ANSI B11.20 : 2004 : R2015 SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS
ANSI B11.11 : 2001 : R2007 SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
C22.2 NO. 236-15 Heating and cooling equipment (Bi-national standard with UL 1995)
CSA C22.2 No. 169 : 2015 ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
ANSI/ASSE A10.17 : 2006 : R2011 SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION
API 617 : 2014 AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
CSA M688 : 2010 : INC : UPD 1 : 2011 : FR PORTABLE AGRICULTURAL AUGER CONVEYING EQUIPMENT - GENERAL SAFETY
ANSI Z21.74-2017 Portable refrigerators
ANSI Z21.40.1 : 1996 GAS-FIRED, HEAT ACTIVATED AIR CONDITIONING AND HEAT PUMP APPLIANCES
ANSI B11.21 : 2006 : R2012 SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS
API 619 : 2010 ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES
NFPA 72E : 1990 AUTOMATIC FIRE DETECTORS
API 616 : 2011 GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
API TR 11L6 : 2008 TECHNICAL REPORT ON ELECTRIC MOTOR PRIME MOVER FOR BEAM PUMPING UNIT SERVICE
CSA T568.1 : 2005 : R2010 COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 1: GENERAL REQUIREMENTS
ICC IBC CODE AND COMMENTARY VOLUME 1 : 2015 IBC® Code and Commentary, Volume 1
CSA C22.2 No. 60335-2-89 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-89: PARTICULAR REQUIREMENTS FOR COMMERCIAL REFRIGERATING APPLIANCES WITH AN INCORPORATED OR REMOTE REFRIGERANT UNIT OR COMPRESSOR
CSA C370 : 2013 COOLING PERFORMANCE OF PORTABLE AIR CONDITIONERS
CSA C22.2 NO. 60947-5-1:14 (R2019) Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (Bi-national standard, with UL 60947-5-1)
ASTM C 1217 : 2000 : R2006 Standard Guide for Design of Equipment for Processing Nuclear and Radioactive Materials
CAN/CSA-C22.2 NO. 60947-7-1:17 Low-voltage switchgear and controlgear ? Part 7-1: Ancillary equipment ? Terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-1-ANCE and UL 60947-7-1)
SCTE 117 : 2010 SPECIFICATION FOR BRAIDED 75 OHMS, MINI-SERIES BROADBAND COAXIAL CABLE
CAN/CSA-C22.2 NO. 60947-7-2:17 Low-voltage switchgear and controlgear ? Part 7-2: Ancillary equipment ? Protective conductor terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-2-ANCE and UL 60947-7-2)
API RP 2T : 2010 PLANNING, DESIGNING, AND CONSTRUCTING TENSION LEG PLATFORMS
CEI EN 60695-1-40 : 2014 FIRE HAZARD TESTING - PART 1-40: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - INSULATING LIQUIDS
CSA HGV 4.5 : 2013 STANDARD FOR PRIORITY AND SEQUENCING EQUIPMENT FOR HYDROGEN VEHICLE FUELING
ANSI/ASSE A10.22 : 2007 SAFETY REQUIREMENTS FOR ROPE-GUIDED AND NON-GUIDED WORKERS' HOISTS
SAE J 2406 : 2018 RECOMMENDED PRACTICES FOR CNG POWERED MEDIUM AND HEAVY-DUTY TRUCKS
ANSI Z21.96 : 2014 PORTABLE WATER HEATERS FOR OUTDOOR USE
CSA C22.2 No. 291 : 2014(R2019) BARE AND COVERED FERRULES
IEEE DRAFT C37.96 : D5 99 DRAFT GUIDE FOR AC MOTOR PROTECTION
ISO 19906:2010 Petroleum and natural gas industries Arctic offshore structures
CAN/CSA-C22.2 NO. 60947-7-3:17 Low-voltage switchgear and controlgear ? Part 7-3: Ancillary equipment ? Safety requirements for fuse terminal blocks (Trinational standard NMX-J-538/7-3-ANCE with UL 60947-7-3)
NFPA 655 : 2017 PREVENTION OF SULFUR FIRES AND EXPLOSIONS