• There are no items in your cart

NFPA 70E : 2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

ELECTRICAL SAFETY IN THE WORKPLACE
Available format(s)

Hardcopy

Superseded date

10-31-2020

Language(s)

English

Published date

01-01-2018

Chapter 1 - Safety-Related Work Practices
Chapter 2 - Safety-Related Maintenance Requirements
Chapter 3 - Safety Requirements for Special Equipment
Informative Annex A: Informative Publications
Informative Annex B: Reserved
Informative Annex C: Limits of Approach
Informative Annex D: Incident Energy and Arc Flash
                     Boundary Calculation Methods
Informative Annex E: Electrical Safety Program
Informative Annex F: Risk Assessment and Risk
                     Control
Informative Annex G: Sample Lockout/Tagout
                     Program
Informative Annex H: Guidance on Selection of
                     Protective Clothing and Other Personal
                     Protective Equipment (PPE)
Informative Annex I: Job Briefing and Planning
                     Checklist
Informative Annex J: Energized Electrical Work
                     Permit
Informative Annex K: General Categories of
                     Electrical Hazards
Informative Annex L: Typical Application of
                     Safeguards in the Cell Line
                     Working Zone
Informative Annex M: Layering of Protective
                     Clothing and Total System
                     Arc Rating
Informative Annex N: Example Industrial Procedures
                     and Policies for Working Near
                     Overhead Electrical
                     Lines and Equipment
Informative Annex O: Safety-Related Design
                     Requirements
Informative Annex P: Aligning Implementation of
                     This Standard with Occupational
                     Health and Safety Management
                     Standards
Informative Annex Q: Human Performance and
                     Workplace Electrical Safety
Index

Describes electrical safety-related work practices, safety-related maintenance requirements, and other administrative controls for employee workplaces that are necessary for the practical safeguarding of employees relative to the hazards associated with electrical energy during activities such as the installation, inspection, operation, maintenance, and demolition of electric conductors, electric equipment, signaling and communications conductors and equipment, and raceways.

DevelopmentNote
Also available with NFPA 70B. Also available with NFPA 70 and NFPA 70B. Also available with NFPA 79 and NFPA 70B. (08/2011) Also available as NFPA 70E SET with NFPA 70E HDBK. (01/2013) 2015 Version is also available in Spanish; See NFPA 70E SPANISH. (09/2016)
DocumentType
Standard
Pages
106
PublisherName
National Fire Protection Association
Status
Superseded
SupersededBy
Supersedes

IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
15/30259978 DC : 0 BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C.
IEEE 902 : 1998 MAINTENANCE, OPERATION, AND SAFETY OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
UFC 3-501-01 : 2015 UNIFIED FACILITIES CRITERIA - ELECTRICAL ENGINEERING
ANSI B11.21 : 2006 SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS
MIL-DTL-32529 Base Document:2015 POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD
ANSI B11.3 : 2012 SAFETY REQUIREMENTS FOR POWER PRESS BRAKES
ANSI B11.12 : 2005 : R2010 SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES
ANSI B11.20 : 2004 : R2009 SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS
ANSI B11.6 : 2001 : R2012 SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
IEEE 1668-2014 IEEE Trial-Use Recommended Practice for Voltage Sag and Short Interruption Ride-Through Testing for End-Use Electrical Equipment Rated Less than 1000 V
API T 1 : 2016 CREATING ORIENTATION PROGRAMS FOR PERSONNEL GOING OFFSHORE
IEEE 1578-2007 IEEE Recommended Practice for Stationary Battery Electrolyte Spill Containment and Management
IEEE 1584-2002 IEEE Guide for Performing Arc Flash Hazard Calculations
NFPA 25 HANDBOOK : 2011 INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS HANDBOOK
ASTM E 1549/E1549M : 2013 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
NFPA 18A : 2017 WATER ADDITIVES FOR FIRE CONTROL AND VAPOR MITIGATION
NFPA 79 : 2018 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
NFPA 59 : 2018 UTILITY LP-GAS PLANT CODE
IEEE 1657-2009 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
NETA ECS : 2015 ELECTRICAL COMMISSIONING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
UNE-EN ISO 16230-1:2016 Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
ANSI B11.18 : 2006 SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL
PIP ELCGL01 : 2013 ELECTRICAL DESIGN CRITERIA
UFC 3-520-05 : Change 1 UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS
FC 4-211-03F : 2016 FACILITIES CRITERIA - AIR FORCE FIGHTER ENGINE MAINTENANCE FACILITY
UFC 3-550-07 : 2017 UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS
FC 4-721-02F : 2015 FACILITIES CRITERIA - AIR FORCE LEVEL 1 CONFINEMENT FACILITY
UFC 3-520-01 : 2015 UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS
ASHRAE/ACCA 180 : 2008 STANDARD PRACTICE FOR INSPECTION AND MAINTENANCE OF COMMERCIAL BUILDING HVAC SYSTEMS
SSPC-GUIDE 12 : 2016 GUIDE TO ILLUMINATION OF INDUSTRIAL COATING PROJECTS
ANSI B11.20 : 2004 SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS
IEEE 3007.1 : 2010 RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE C37.20.7-2007 REDLINE IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
ANSI Z49.1 : 2012 SAFETY IN WELDING, CUTTING, AND ALLIED PROCESSES
I.S. EN ISO 16230-1:2015 AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
UFC 3-560-01 : Change 1 UNIFIED FACILITIES CRITERIA (UFC) - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY
ANSI B11.8:2001(R2007) SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
ANSI B11.0 : 2015 SAFETY OF MACHINERY - GENERAL REQUIREMENTS AND RISK ASSESSMENT
ANSI B11.2 : 2013 SAFETY REQUIREMENTS FOR HYDRAULIC AND PNEUMATIC POWER PRESSES
NETA ATS : 2017 ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
API 500 RUSSIAN :1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
API 500 RUSSIAN : 1997 : R2002 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
IEEE 3004.5-2014 IEEE Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems
IEEE 45-7 : 2012 RECOMMENDED PRACTICE FOR ELECTRICAL INSTALLATIONS ON SHIPBOARD - AC SWITCHBOARDS
BS EN ISO 16230-1:2015 Agricultural machinery and tractors. Safety of higher voltage electrical and electronic components and systems General requirements
13/30280565 DC : 0 BS EN ISO 16230-1 - AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
ANSI B11.17 : 2004 : R2015 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
ANSI B11.17 : 2004 : R2009 SAFETY REQUIREMENTS FOR HORIZONTAL HYDRAULIC EXTRUSION PRESSES
ANSI B11.23 : 2002 : R2012 SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES
Z462-18 Workplace electrical safety
ANSI B11.1 : 2009 SAFETY REQUIREMENTS FOR MECHANICAL POWER PRESSES
ANSI B11.10 : 2003 : R2009 SAFETY REQUIREMENTS FOR METAL SAWING MACHINES
ANSI B11.24 : 2002 : R2012 SAFETY REQUIREMENTS FOR TRANSFER MACHINES
ANSI B11.24 : 2002 : R2007 SAFETY REQUIREMENTS FOR TRANSFER MACHINES
ANSI B11.23 : 2002 : R2007 SAFETY REQUIREMENTS FOR MACHINING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED MILLING, DRILLING AND BORING MACHINES
ANSI B11.10 : 2003 : R2015 SAFETY REQUIREMENTS FOR METAL SAWING MACHINES
ANSI B11.22 : 2002 : R2012 SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES
ANSI B11.18 : 2006 : R2012 SAFETY REQUIREMENTS FOR MACHINES PROCESSING OR SLITTING COILED OR NON-COILED METAL
ANSI B11.22 : 2002 : R2007 SAFETY REQUIREMENTS FOR TURNING CENTERS AND AUTOMATIC, NUMERICALLY CONTROLLED TURNING MACHINES
ANSI/ASSP A10.8 : 2011 SCAFFOLDING SAFETY REQUIREMENTS
NEMA SG 10 : 2013 GUIDE TO OSHA AND NFPA 70E SAFETY REQUIREMENTS WHEN SERVICING AND MAINTAINING MEDIUM-VOLTAGE SWITCHGEAR, CIRCUIT BREAKERS, AND MEDIUM-VOLTAGE CONTROLLERS RATED ABOVE 1000 V
NEMA KS 3:2010 Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications
NEMA ABP 8:2016 Avoid Arc-Flash Occurrences by Following Industry Standards
NEMA ICS 3.1 : 2009(R2014) GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS
NEMA VE 2 : 2013 CABLE TRAY INSTALLATION GUIDELINES
ANSI/NEMA KS 2:2013 Distribution Equipment Switch Application Guide, A User\'s Reference
NEMA ICS 1.3:1986 (R2001, R2009, R2015) Preventive Maintenance of Industrial Control and Systems Equipment
ANSI/NEMA PB 2.1:2013 General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less
NEMA SG 11 : 2013 GUIDE FOR HANDLING AND MAINTENANCE OF ALTERNATING CURRENT OUTDOOR HIGH-VOLTAGE CIRCUIT BREAKERS
FC 4-179-03F : 2015 FACILITIES CRITERIA - AIR FORCE INDOOR SMALL ARMS FIRING RANGE
NEMA SG 4:2009(R2013) ALTERNATING CURRENT HIGH-VOLTAGE CIRCUIT BREAKERS
ANSI/NEMA PB 1.1:2013 General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less
ANSI/NEMA AB 3:2013 Molded-Case Circuit Breakers and Their Application
NEMA ICS 7.1:2014 Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems
NEMA ICS 1 : 2000(R2015) INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS
NEMA BU 1.1:2010 General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less
NFPA 1855 : 2018 SELECTION, CARE, AND MAINTENANCE OF PROTECTIVE ENSEMBLES FOR TECHNICAL RESCUE INCIDENTS
EEE 602 : 2007 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
ANSI/SPI B151.31:2014 PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR THE MANUFACTURE AND USE OF BLOW MOLDING MACHINES
UFC 3-550-01 : CHANGE 1 UNIFIED FACILITIES CRITERIA - EXTERIOR ELECTRICAL POWER DISTRIBUTION
IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
RMA B28.9 : 1983 AMERICAN NATIONAL STANDARDS FOR RUBBER MACHINERY LET-OFF EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CAR AND USE
14/30304595 DC : 0 BS EN 61482-2 - LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC - PART 2: REQUIREMENTS
IEEE 400-2012 REDLINE IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
BS ISO 18639-1:2018 PPE ensembles for firefighters undertaking specific rescue activities General
ANSI B11.15 : 2001 : R2007 SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES
IEEE 3007.2 : 2010 This recommended practice covers the maintenance of industrial and commercial power systems.
ANSI/SPI B151.29:2014 PLASTICS MACHINERY - SAFETY REQUIREMENTS FOR VERTICAL CLAMP INJECTION MOLDING MACHINES
ANSI B11.15 : 2001 : R2012 SAFETY REQUIREMENTS FOR PIPE, TUBE, AND SHAPE BENDING MACHINES
IEEE C37.20.6-2015 IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
IEEE 1827-2016 IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities
ANSI/ASSP Z244.1:2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
IEEE C37.59-2007 IEEE Standard Requirements for Conversion of Power Switchgear Equipment
IEEE DRAFT C37.20.7 : 0 TESTING METAL-ENCLOSED SWITCHGEAR RATED UP TO 38 KV FOR INTERNAL ARCING FAULTS
IEEE 1159-2009 IEEE Recommended Practice for Monitoring Electric Power Quality
ASTM E 1549/E1549M : 2013 : R2016 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
ASTM E 2014 : 2017 : REDLINE Standard Guide on Metallographic Laboratory Safety
API 2610:2005 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
IEEE 1458-2005 IEEE Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications
IEEE DRAFT 1184 : D21 2006 GUIDE FOR BATTERIES FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS
IEEE 1818-2017 IEEE Guide for the Design of Low-Voltage Auxiliary Systems for Electric Power Substations
IEEE 3001.5-2013 IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems
IEEE C62.72-2007 IEEE Guide for the Application of Surge Protective Devices for Low Voltage (1000 Volts or Less) AC Power Circuits
DIN EN ISO 16230-1:2016-08 AGRICULTURAL MACHINERY AND TRACTORS - SAFETY OF HIGHER VOLTAGE ELECTRICAL AND ELECTRONIC COMPONENTS AND SYSTEMS - PART 1: GENERAL REQUIREMENTS (ISO 16230-1:2015)
ISO 16230-1:2015 Agricultural machinery and tractors Safety of higher voltage electrical and electronic components and systems Part 1: General requirements
NASA SSTD 8070 0138 : 2015 ARC FLASH STANDARD
NASA KSC STD E 0012 : 2013 FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC E 166 : 2009 INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA SSTD 8070 0081 : 2001 FACILITY ELECTRICAL STANDARD
IEEE 3001.2-2017 IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
ANSI E1.32 : 2012(R2017) GUIDE FOR THE INSPECTION OF ENTERTAINMENT INDUSTRY INCANDESCENT LAMP LUMINAIRES
ANSI B11.25 : 2015 SAFETY REQUIREMENTS FOR LARGE MACHINES
SCTE 108 : 2018 TEST METHOD FOR DIELECTRIC WITHSTAND OF COAXIAL CABLE
C22.10-10 Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments
IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
ANSI B11.7 : 1995 COLD HEADERS AND COLD FORMERS - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
ANSI B11.9:2010 SAFETY REQUIREMENTS FOR GRINDING MACHINES
RMA B28.7 : 1983 TAKEOFF EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
ANSI B11.9 : 2010(R2015) SAFETY REQUIREMENTS FOR GRINDING MACHINES
IEEE DRAFT C57.12.01 : D6 2005 GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS INCLUDING THOSE WITH SOLID-CAST AND/OR RESIN ENCAPSULATED WINDINGS
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
ANSI B11.12 : 2005 : R2015 SAFETY REQUIREMENTS FOR ROLL-FORMING AND ROLL-BENDING MACHINES
IEEE C57.152-2013 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
ANSI B11.6 : 2001 : R2007 SAFETY REQUIREMENTS FOR MANUAL TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
IEEE 45.1-2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
ISO 18639-1:2018 PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General
IEEE C37.10-2011 REDLINE IEEE Guide for Investigation, Analysis, and Reporting of Power Circuit Breaker Failures
IEEE 1184-2006 IEEE Guide for Batteries for Uninterruptible Power Supply Systems
IEEE 979-2012 IEEE Guide for Substation Fire Protection
ISO 14990-1:2016 Earth-moving machinery — Electrical safety of machines utilizing electric drives and related components and systems — Part 1: General requirements
IEEE 463-2013 REDLINE IEEE Standard for Electrical Safety Practices in Electrolytic Cell Line Working Zones
API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
IEC 61482-2:2018 REDLINE LIVE WORKING - PROTECTIVE CLOTHING AGAINST THE THERMAL HAZARDS OF AN ELECTRIC ARC - PART 2: REQUIREMENTS
RMA B28.8 : 1983 RUBBER MACHINERY - WINDUP EQUIPMENT FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE AND USE
IEEE DRAFT 602 : D2 2006 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 2610 : 2005 : R2010 DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES
IEC TS 62933-5-1:2017 Electrical energy storage (EES) systems - Part 5-1: Safety considerations for grid-integrated EES systems - General specification
BS ISO 14990-1:2016 Earth-moving machinery. Electrical safety of machines utilizing electric drives and related components and systems General requirements
ANSI/ASSE A10.8 REDLINE : 2011 COMPARISON DOCUMENT OF A10.8 AMERICAN NATIONAL STANDARD - SCAFFOLDING SAFETY REQUIREMENTS (FOR VERSIONS 2001 AND 2011)
EN ISO 16230-1:2015 Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
IEEE 1361-2014 IEEE Guide for Selecting, Charging, Testing, and Evaluating Lead-Acid Batteries Used in Stand-Alone Photovoltaic (PV) Systems
IEEE 241 : 1990 ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS
IEEE 400.4-2015 IEEE Guide for Field Testing of Shielded Power Cable Systems Rated 5 kV and Above with Damped Alternating Current (DAC) Voltage
IEEE 1683-2014 IEEE Guide for Motor Control Centers Rated up to and including 600 V AC or 1000 V DC with Recommendations Intended to Help Reduce Electrical Hazards
RMA B28.6 : 1983 REINFORCING MACHINERY FOR RUBBER HOSE - SAFETY REQUIREMENTS FOR CONSTRUCTION, CARE, AND USE
NFPA 25 : 2017 INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS
ASTM F 3272 : 2017 Standard Guide for Selection, Care, and Use of Arc Protective Blankets
API 99 : 2014 FLASH FIRE RISK ASSESSMENT FOR THE UPSTREAM OIL AND GAS INDUSTRY
IEEE 1653.1-2016 IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output
IEEE C37.48-2005 IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
ANSI B11.11 : 2001 : R2012 SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
IEEE 1187-2013 REDLINE IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications
ANSI/ASSE Z244.1 : 2016 THE CONTROL OF HAZARDOUS ENERGY LOCKOUT, TAGOUT AND ALTERNATIVE METHODS
ANSI B11.8:2001(R2012) SAFETY REQUIREMENTS FOR MANUAL MILLING, DRILLING AND BORING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL
ANSI B11.20 : 2004 : R2015 SAFETY REQUIREMENTS FOR INTEGRATED MANUFACTURING SYSTEMS
ANSI B11.11 : 2001 : R2007 SAFETY REQUIREMENTS FOR GEAR AND SPLINE CUTTING MACHINES
ANSI B11.21 : 2006 : R2012 SAFETY REQUIREMENTS FOR MACHINE TOOLS USING A LASERS FOR PROCESSING MATERIALS
IEEE 45.6-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing
IEEE 400.2-2013 REDLINE IEEE Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)(less than 1 Hz)
IEEE 1584.1-2013 IEEE Guide for the Specification of Scope and Deliverable Requirements for an Arc-Flash Hazard Calculation Study in Accordance with IEEE Std 1584(TM)
NFPA 350 : 2016 SAFE CONFINED SPACE ENTRY AND WORK
ANSI B11.4 : 2003 SAFETY REQUIREMENTS FOR SHEARS
API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
ASTM E 2345 : 2004 Standard Practice for Investigating Electrical Incidents (Withdrawn 2004)
IEEE C37.20.1-2015 REDLINE IEEE Standard for Metal-Enclosed Low-Voltage (1000 Vac and below, 3200 Vdc and below) Power Circuit Breaker Switchgear
IEEE C37.21-2005 IEEE Standard for Control Switchboards
IEC 61482-2:2018 RLV Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements
ASME EA 2:2009 ENERGY ASSESSMENT FOR PUMPING SYSTEMS
ASME EA 2 : 2009 : R2015 ENERGY ASSESSMENT FOR PUMPING SYSTEMS

IEEE 3007.1 : 2010 RECOMMENDED PRACTICE FOR THE OPERATION AND MANAGEMENT OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
ASTM F 1505 : 2016 : REDLINE Standard Specification for Insulated and Insulating Hand Tools
IEC TS 60479-1:2005+AMD1:2016 CSV Effects of current on human beings and livestock - Part 1: Generalaspects
IEEE 1187-2013 REDLINE IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications
IEEE 3007.2 : 2010 This recommended practice covers the maintenance of industrial and commercial power systems.
IEEE C37.20.6-2015 IEEE Standard for 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
ASTM F 496 : 2014-04 SPECIFICATION FOR IN-SERVICE CARE OF INSULATING GLOVES AND SLEEVES
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
ASTM F 2675/F2675M : 2013 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection
ASTM D 1049 : 1998 Standard Specification for Rubber Insulating Covers
NFPA 79 : 2015 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
IEEE 1106-2015 REDLINE IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications
IEEE 1657-2009 IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries
CSA Z462 : 2015 WORKPLACE ELECTRICAL SAFETY
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
NETA MTS : 2011 MAINTENANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
UL 943:5ED 2016-05 Ground-Fault Circuit-Interrupters
ANSI A14.1 : 2007 WOOD SAFETY REQUIREMENTS
IEEE 3007.3-2012 IEEE Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems
IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
ANSI Z535-2011 COLOR CHART
ANSI A14.5 : 2007 PORTABLE REINFORCED PLASTIC - SAFETY REQUIREMENTS
ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
IEEE C2-2017 NATIONAL ELECTRICAL SAFETY CODE (NESC)(R)
ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
ISO 14001:2015 Environmental management systems — Requirements with guidance for use
ASTM F 1506 : 2017-11 PERFORMANCE SPECIFICATION FOR FLAME RESISTANT AND ELECTRIC ARC RATED PROTECTIVE CLOTHING WORN BY WORKERS EXPOSED TO FLAMES AND ELECTRIC ARCS
NFPA 1 : 2018 FIRE CODE
IEEE 1584B : 2011 GUIDE FOR PERFORMING ARC-FLASH HAZARD CALCULATIONS - AMENDMENT 2: CHANGES TO CLAUSE 4
ANSI Z358.1 : 2014 EMERGENCY EYEWASH AND SHOWER EQUIPMENT
IEEE C37.20.7-2007 REDLINE IEEE Guide for Testing Metal-Enclosed Switchgear Rated Up to 38 kV for Internal Arcing Faults
IEEE 450-2010 REDLINE IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
IEEE 1184-2006 IEEE Guide for Batteries for Uninterruptible Power Supply Systems
ASTM F 887 : 2017-02 SPECIFICATIONS FOR PERSONAL CLIMBING EQUIPMENT
CSA Z1000 : 2014 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT
ANSI Z87.1 : 2015 OCCUPATIONAL AND EDUCATIONAL PERSONAL EYE AND FACE PROTECTION DEVICES
IEEE 1584-2002 IEEE Guide for Performing Arc Flash Hazard Calculations
CFR 29(PT1926) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
IEEE 946-2004 IEEE Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Systems
ANSI A14.4 : 2009 SAFETY REQUIREMENTS FOR JOB MADE WOODEN LADDERS
IEEE 937-2007 REDLINE IEEE Recommended Practice for Installation and Maintenance of Lead-Acid Batteries for Photovoltaic (PV) Systems
IEEE 1491-2012 REDLINE IEEE Guide for Selection and Use of Battery Monitoring Equipment in Stationary Applications
ANSI A14.3 : 2008(R2018) FIXED - SAFETY REQUIREMENTS
IEEE 1584a-2004 IEEE Guide for Performing Arc-Flash Hazard Calculations--Amendment 1

View more information
US$127.20
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.