PPP-P-1892 Base Document:1974
Withdrawn
Withdrawn
PAINT, VARNISH, LACQUER, AND RELATED MATERIALS: PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT)
Available format(s)
PDF
Published date
12-31-1974
Publisher
Withdrawn date
11-21-1997
US$20.00
Excluding Tax where applicable
Defines requirements for packing, packaging and marking of paint, lacquer, varnish and related materials for shipment and storage
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| TT-P-320 Revision D:1977 | PIGMENT, ALUMINUM: POWDER AND PASTE, FOR PAINT (S/S BY A-A-341) |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY, NO. 17 (FORMULA NO. 5-0) (METRIC) (S/S BY DOD-E-24635 OR FED-STD-595) |
| MIL-P-85658 Base Document:1986 | PAINT, WATER DISPLACING |
| DOD-P-15328 Revision D:1978 | Primer (Wash), Pretreatment (Formula NO. 117 for Metals) (Metric) (S/S by TT-C-490) |
| MIL-E-52891 Revision B:1988 | Enamel, Lusterless, Zinc Phosphate, Styrenated Alkyd Type |
| MIL-P-6884 Revision F:1973 | PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE (NO S/S DOCUMENT) |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) (NO S/S DOCUMENT) |
| TT-P-664 Revision D:1988 | PRIMER COATING, ALKYD, CORROSION-INHIBITING, LEAD AND CHROMATE FREE, VOC-COMPLIANT (S/S BY SSPC-PAINT25) |
| MIL-C-52032 Revision D:1995 | Coating, Interior, Fuel Resistant, VOC Complaint for Gasoline Containers (No S/S Document) |
| DOD C 22325 : A | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
| DOD P 24631 : (1) SUPP 1 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| TT-P-2760 Revision A:1994 | Primer Coating: Polyurethane, Elastomeric, High-Solids |
| DOD-V-15218 Revision C:1977 | VARNISH (MIXING, PHENOLIC) (METRIC) (NO S/S DOCUMENT) |
| MIL-P-28578 Revision B:1988 | PAINT, WATER-BORNE, ACRYLIC OR MODIFIED ACRYLIC, SEMIGLOSS, FOR METAL SURFACES (S/S BY A-A-50570) |
| DOD-P-15144 Revision B:1977 | PAINT, FORMULA NO. 34 (BINDER FOR ANTI SWEAT COATINGS) (METRIC) (NO S/S DOCUMENT) |
| MIL-C-47002 Revision A:1991 | Coating, Polyurethane, Single Component System (No S/S Document) |
| MIL-C-46168 Revision D:1987 | Coating, Aliphatic Polyurethane, Chemical Agent Resistant (See Notice 1 for Replacement Information) |
| MIL-R-10036 Revision E:1987 | RUST ARRESTING COATING (FOR TREATMENT OF RUSTED METAL) (NO S/S DOCUMENT) |
| MIL-L-46159 Revision A:1976 | Lacquer, Acrylic, Low Reflective (S/S by MIL-C-46168 or MIL-c-53039 now MIL-DTL-53039) |
| MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| TT-P-1757 Revision B:1997 | Primer Coating, ALKYD Base, One Component |
| MIL-STD-1428 Base Document:1981 | CLEANING COMPOUNDS (NO S/S DOCUMENT) |
| SAE AMS3126D | Aluminum Coating Material, Corrosion and Heat Resistant Thermosetting, Inorganic Binder |
| MIL-C-47221 Revision A:1982 | Compound, Molding, Epoxy Resin, Silicon Dioxide and Asbestos-Fiber Filled (No S/S Document) |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT (NO S/S DOCUMENT) |
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| MIL-C-83231 Revision A:1981 | Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts (S/S by SAE-AMS-C-83231) |
| MIL P 11414 : E | PRIMER COATING, LACQUER, RUST INHIBITING |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| TT-P-86 Revision H:1987 | PAINT, RED-LEAD BASE, READY-MIXED (NO S/S DOCUMENT) |
| DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) (S/S BY FED-STD-595/15187) |
| MIL-R-23461 Revision A:1987 | Resin Compound, Thermosetting, Room Temperature Curing,for Metal Coating |
| MIL-I-24718 Base Document:1990 | Insulating Resins, Solventless, Vacuum-Pressure-Impregnating; General Specification for |
| MIL-P-28642 Base Document:1977 | PAINT (TOPCOAT), VINYL CHLORIDE-ACETATE COPOLYMER, HIGH-BUILD (FOR STEEL AND MASONRY) (S/S BY MIL-P-24441 AND MIL-C-85285) |
| MIL E 1115 : D | ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| MIL-E-52929 Base Document:1977 | Enamel, Alkyd, Camouflage, Flash Dry (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODES (S/S BY MIL-STD-2073-2) |
| MIL-C-83445 Revision A:1980 | Coating System, Polyurethane, Non-Yellowing, White, Rain Erosion Resistant, Thermally Reflective (S/S by SAE-AMS-C-83445) |
| MIL-L-24478 Revision C:1990 | Lubricant, Molybdenum Disulfide in Isopropanol |
| TT-P-47 Revision G:1984 | PAINT, OIL (NONPENETRATING - FLAT, READY-MIXED TINTS AND WHITE) (S/S BY A-A-2246) |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) (S/S BY A-A-2786, TT-P-664) |
| MIL-I-16923 Revision H:1991 | Insulating Compound, Electrical, Embedding, Epoxy (S/S by A-A-59877) |
| MIL-C-82747 Base Document:1988 | Coating Polyurethane Clear, Safflower Oil Modified Alkyd (No S/S Document) |
| MIL-A-46091 Revision B:1981 | Adhesive, Brake Lining to Metal (No S/S Document) |
| DOD-P-24555 Base Document:1977 | Paint, Aluminum, Heat-Resisting (650 Degree C), Low-Emissivity (0.40 or Less) (Metric) |
| SS-S-1996 Base Document:1976 | SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES (NO S/S DOCUMENT) |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| MIL-S-53018 Base Document:1983 | SEALER, WELD-THROUGH FOR OVERLAPPING SURFACES (NO S/S DOCUMENT) |
| MMM-A-179 Revision B:1982 | ADHESIVE: PAPER LABEL (S/S BY A-A-3006) |
| TT-E-490 Revision E:1975 | Enamel, Silicone Alkyd Copolymer, Semigloss (for Exterior and Interior Use (S/S by MIL-PRF-24635) |
| MIL E 24635 : B | ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
| MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
| TT-P-110 Revision C:1977 | PAINT, TRAFFIC BLACK (NONREFLECTORIZED) (S/S BY TT-P-1952 OR A-A-2886) |
| DOD-P-24655 Base Document:1985 | PAINT, UNDERWATER HULL, ANTICORROSION (METRIC) (S/S BY DOD-P-24647) |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) (S/S BY DOD-P-24631) |
| MIL-S-19653 Revision B:1984 | Sealing Compound (Wood Bedding) (No S/S Document) |
| MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
| TT-P-2756 Revision A:1996 | Polyurethane Coating: Self-Priming Topcoat, Low Volatile Organic Compounds (VOC) Content (No S/S Document) |
| TT-P-650 Revision D:1988 | Primer Coating, Latex Base, Interior, White (for Gypsum Wallboard) (See Notice 1 for Replacement Information) |
| TT-E-489 Revision J:1994 | Enamel, Alkyd, Gloss, Low VOC Content (See Notice 2 for Replacement Information) |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL-C-29475 Base Document:1994 | Coating, Water Borne Polyurethane Camouflage (S/S by MIL-DTL-64159) |
| DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| MIL-P-53032 Base Document:1983 | PRIMER COATING, WATER REDUCIBLE, EPOXY ESTER-LATEX TYPE, LEAD AND CHROMATE FREE (NO S/S DOCUMENT) |
| MIL P 46093 : A | PRIMER COATING, SYNTHETIC (FOR BRAKE DRUMS) |
| TT-S-001992 Base Document:1975 | STAIN, LATEX, EXTERIOR FOR WOOD SURFACES (NO S/S DOCUMENT) |
| DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| MIL-P-22299 Revision B:1985 | PAINT, ANTIFOULING, POLYISOBUTYLENE (FORMULA NO. 134) (S/S BY DOD-P-24631) |
| TT-E-508 Revision C:1977 | ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES (S/S BY A-A-50574) |
| MIL-L-24479 Revision C:1990 | Lubricant, Red Lead and Graphite in Mineral Oil (No S/S Document) (for Future Acquisition of a Product with Similar Functional Performance Refer to A-A-59004) |
| MIL-C-18255 Revision E:1989 | Calking Compound, Synthetic Rubber Base, Wooden Deck Seam Application (See Notice 1 for Replacement Information) |
| MIL C 46127 : A | COATING, GRAY, UNDERCOAT (SOLAR HEAT REFLECTING) |
| MIL-E-52835 Revision A:1977 | Enamel, Modified Alkyd, Camouflage, Lusterless (S/S by MIL-C-46168 or MIL-DTL-53039) |
| MIL L 52909 : NOTICE 1 | LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS |
| MIL-L-24131 Revision C:1995 | Lubricant, Colloidal Graphite in Isopropanol |
| TT-P-115 Revision F:1984 | PAINT, TRAFFIC, HIGHWAY, WHITE AND YELLOW (NO S/S DOCUMENT) |
| MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) (SEE NOTICE 1 FOR REPLACEMENT INFORMATION) |
| MIL P 28641 : 0 | PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| MIL-P-52905 Revision A:1994 | PAINT CAMOUFLAGE, REMOVABLE (NO S/S DOCUMENT) |
| MIL-L-2638 Revision D:1975 | Lacquer, Vinyl Resin, Gasoline and Water Resistant (S/S by MIL-C-4556) |
| MIL-C-46157 Revision A:1983 | Coating Compound, Temporary Protective for Retrograde Materials (No S/S Document) |
| TT-E-505 Revision B:1985 | ENAMEL (ODORLESS, ALKYD, INTERIOR, HIGH GLOSS) (S/S BY TT-E-506) |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| TT-P-96 Revision D:1976 | PAINT, LATEX BASE, FOR EXTERIOR SURFACES (WHITE AND TINTS) (S/S BY TT-P-19) |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE-NITRATE MODIFIED ALKYD TYPE, CORROSION-INHIBITING, FAST-DRYING (FOR SPRAY APPLICATION OVER PRETREATMENT COATING) (NO S/S DOCUMENT) |
| TT P 001952 : C | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
| MIL-S-11388 Revision D:1983 | SEALING MATERIAL FOR METAL CONTAINER SEAMS |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL-A-5540 Revision B:1967 | Adhesive, Polychloroprene |
| SAE AMS1376B | Remover, Epoxy Paint Acid-Type, Thickened |
| DOD-R-18708 Revision B:1990 | RUST-ARRESTING COATING, SHIPBOARD EXTERIOR, GRAY, NAVY FORMULA NO. 123G METRIC (NO S/S DOCUMENT) |
| MIL-R-53086 Base Document:1988 | RUST CONVERTER, METRIC (NO S/S DOCUMENT) |
| MIL-C-22325 Revision B:1988 | Color, Tinting, for Interior Nonflaming (Dry) Paints (Metric) (S/S by DOD-E-24607 and MIL-PRF-24596) |
| TT-E-545 Revision C:1986 | PRIMER COATING, INTERIOR, FOR WALLS AND WOOD (S/S BY A-A-2994) |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| TT-L-215 Revision D:1977 | LINSEED OIL, RAW (FOR USE IN ORGANIC COATINGS) (S/S BY A-A-379) |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS AND SEMIGLOSS, TINTS AND WHITE) (FOR INTERIOR USE) (S/S BY TT-P-29) |
| MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| MIL R 46073 : B | REMOVER, PAINT; ORGANIC, SOLVENT TYPE |
| TT-D-376 Revision D:1975 | Dipentene, Technical (for Use in Organic Coatings) (No S/S Document) |
| TT-W-551 Revision F:1976 | Wood Preservative, Chromated Zinc Chloride Mixture (No S/S Document) |
| TT-T-266 Revision D:1976 | THINNER, DOPE AND LACQUER (CELLULOSE NITRATE) (S/S BY A-A-857) |
| SAE AMS3145D | Paint, Marking Epoxy |
| MIL-I-15265 Revision C:1992 | Insulation, Electrical, Plastic (Submarine Bus Bar Covering) (No S/S Document) |
| MIL-C-18480 Revision B:1982 | Coating Compound, Bituminous, Solvent, Coal-Tar Base |
| MIL C 85285 : C | |
| MIL-W-15234 Revision C:1988 | WHITING (S/S BY ASTM-D1199) |
| MIL-V-13811 Revision D:1976 | Varnish, Waterproofing, Electrical, Ignition (No S/S Document) |
| TT-E-491 Revision C:1977 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL AND WOOD FURNITURE) (S/S BY TT-E-2784) |
| TT-C-494 Revision B:1985 | COATING COMPOUND, BITUMINOUS, SOLVENT TYPE ACID-RESISTANT (NO S/S DOCUMENT) |
| MIL-C-47116 Revision A:1979 | Coating, Epoxy/Amine (No S/S Document) |
| TT-C-001951 Base Document:1976 | COATING, CLEAR (SATIN FINISH), POLYURETHANE, LATEX, FOR INTERIOR USE (NO S/S DOCUMENT) |
| DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO. 20) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) (METRIC) (S/S BY DOD-E-24635 & FED-STD-595) |
| SAE AMS1659 | COATING, SOIL BARRIER Semi-Permanent |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT (S/S BY A-A-2962) |
| MIL-P-28577 Revision B:1988 | PRIMER, WATER-BORNE, ACRYLIC OR MODIFIED ACRYLIC, FOR METAL SURFACES (S/S BY A-A-50557) |
| MIL-R-24719 Base Document:1989 | Resins, Vinyl Ester, Low PressureLaminating |
| TT-L-190 Revision D:1976 | LINSEED OIL, BOILED, (FOR USE IN ORGANIC COATING) (S/S BY A-A-371) |
| DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) (S/S BY DOD-E-24635, FED-STD-595) |
| MIL P 47115 : A | PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
| TT-P-95 Revision C:1975 | PAINT, RUBBER, FOR SWIMMING POOLS AND OTHER CONCRETE AND MASONRY SURFACES (S/S BY A-A-3120) |
| TT-P-59 Revision E:1975 | PAINT, READY MIXED, INTERNATIONAL ORANGE (NOT FOR RESIDENTIAL USE) (NO S/S DOCUMENT) |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-P-47170 Revision A:1992 | PRIMER, SILICONE RUBBER SEALANT (S/S BY A-A-59116) |
| MIL-I-24092 Revision D:1993 | Insulating Varnishes and Solventless Resins for Application by the Dip Process |
| MIL-L-10287 Revision B:1976 | Lacquer, Cellulose Nitrate for Identification of Small Arms Ammunition |
| MIL E 15145 : C | ENAMEL, ZINC DUST PIGMENTED, FRESH WATER TANK PROTECTIVE, FORMULA NO. 102 |
| TT-P-001984 Base Document:1975 | PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS (NO S/S DOCUMENT) |
| DOD-PRF-24648 Base Document:1985 | Primer Coating, Zinc Dust Pigmented for Exterior Steel Surfaces (Metric) (S/S by A-A-59745) |
| MIL-P-24380 Revision B:1989 | Paint, Anchor Chain, Solvent Type, Gloss Black (Metric)(S/S by MIL-PRF-24635) |
| TT-P-30 Revision E:1977 | PAINT, ALKYD, ODORLESS, INTERIOR, FLAT, WHITE AND TINTS (S/S BY TT-P-29) |
| SAE AMS3136F | Coating Material, Phenolic Resin, PTFE Filled Pigmented, 150 °C (302 °F) Cure |
| ANSI NEMA IM 60003:2023 | Electrical Insulating Varnish |
| PPP-C-96 Revision E:1992 | Cans, Metal, 28 Gage and Lighter |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| PPP-B-636 Revision J:1981 | Boxes, Shipping, Fiberboard (S/S by ASTM-D1974 and ASTM-D5118) |
| MIL-STD-147 Revision E:2008 | Palletized Unit Loads |
| PPP-F-320 Revision D:1970 | Fiberboard: Corrugated and Solid, Sheet Stock (Container Grade), and Cut Shapes (S/S by ASTM-D4727) |
| QQ-S-781 Revision H:1974 | STRAPPING, STEEL, AND SEALS (S/S BY ASTM-D3953-87) |
| PPP-D-705 Revision E:1994 | Drum, Shipping and Storage: Steel, 16 and 30 Gallon Capacity (Future acquisitions for this material should refer to MIL-DTL-6054) |
| FED-STD-123 Revision H:2007 | Marking for Shipment (Civil Agencies) |
| PPP-B-591 Revision B:1971 | BOXES, SHIPPING, FIBERBOARD, WOOD-CLEATED (S/S BY PPP-B-576) |
| PPP-D-729 Revision E:1977 | Drums, Shipping and Storage, Steel, 55-Gallon (208 Liters) |
| PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED-PLYWOOD (S/S BY ASTM-D6251) |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| PPP-D-732 Revision D:1976 | Drum, Metal, 55 Gallon Reconditioned (For Shipment of Noncorrosive) |
| PPP-T-66 Revision E:1976 | TAPE, PACKAGING, VINYL PLASTIC FILM (S/S BY A-A-1689) |
| PPP-B-621 Revision D:1981 | Boxes, Wood, Nailed and Lock-Corner (S/S by ASTM-D6880) |
| MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
| PPP-B-640 Revision D:1966 | Boxes, Fiberboard, Corrugated, Triple Wall (S/S by ASTM-D5168) |
Summarise
US$20.00
Excluding Tax where applicable
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.