PREN 3021 : DRAFT 2015
Withdrawn
Withdrawn
View Superseded by
AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION
Published date
04-18-2016
Withdrawn date
12-11-2023
Superseded by
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Composition
5 Curing
6 Storage
7 Batch release and qualification testing quality assurance
Defines the qualification and test requirements for graphite and halogen free molybdenum disulphide dry film lubricant.
| DocumentType |
Draft
|
| ProductNote |
Superseded by EN 3021:2017
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| DIN EN 3021:2017-09 | Identical |
| NF EN 3021 : 2017 | Identical |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| EN 4160:2011 | Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
| EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
| ISO 2812-2:2007 | Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method |
| PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
| EN 2497:1989 | Aerospace series - Dry abrasive blasting of titanium and titanium alloys |
| EN ISO 9117-6:2012 | Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) |
| EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method |
| ISO 6270-1:1998 | Paints and varnishes — Determination of resistance to humidity — Part 1: Continuous condensation |
| ISO 2808:2007 | Paints and varnishes — Determination of film thickness |
| EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
| EN 2491:2011 | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 8504-2:2001 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| ISO 8080:1985 | Aerospace — Anodic treatment of titanium and titanium alloys — Sulfuric acid process |
| EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
| EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| EN 3026:1994 | Aerospace series - Test method for dry film lubricants - Corrosion test on steels specimens |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
| ISO 2811-2:2011 | Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method |
| ISO 11078:2007 | Aircraft — De-icing/anti-icing fluids — ISO types II, III and IV |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| ISO 4618:2014 | Paints and varnishes — Terms and definitions |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 2811-4:2011 | Paints and varnishes — Determination of density — Part 4: Pressure cup method |
| ISO 1513:2010 | Paints and varnishes — Examination and preparation of test samples |
| ISO 1519:2011 | Paints and varnishes — Bend test (cylindrical mandrel) |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| ISO 1524:2013 | Paints, varnishes and printing inks — Determination of fineness of grind |
| EN 3027:1994 | Aerospace series - Test method for dry film lubricants - Salt spray test |
| ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning |
| ISO 11075:2007 | Aircraft — De-icing/anti-icing fluids — ISO type I |
| ISO 9117-1:2009 | Paints and varnishes — Drying tests — Part 1: Determination of through-dry state and through-dry time |
| ISO 9117-6:2012 | Paints and varnishes — Drying tests — Part 6: Print-free test |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
| EN 3030:1994 | Aerospace series - Test method for dry film lubricants - Solids content |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| ISO 4628-2:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering |
| EN ISO 4618:2014 | Paints and varnishes - Terms and definitions (ISO 4618:2014) |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| ISO 2431:2011 | Paints and varnishes — Determination of flow time by use of flow cups |
Summarise
Sorry this product is not available in your region.