SAE AMS3276F
Superseded
Superseded
View Superseded by
Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C)
Published date
05-16-2016
Publisher
Superseded date
05-02-2024
Superseded by
Sorry this product is not available in your region.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies fuel-resistant polysulfide (T) sealing compounds supplied as a two-component system.
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers fuel-resistant polysulfide (T) sealing compounds supplied as a two-component system.
| SAE AMS3166C | Solvents, Cleaning, Cleaning Prior to Application of Sealing Compounds |
| SAE AMS3265E | Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C) |
| SAE AMS3278B | Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose |
| SAE AMSC27725D | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C) |
| SAE AMS3379 | Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| SAE AMS3278C | Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant, High Tensile Strength/Elongation for Integral Fuel Tanks/Fuel Cavities/General Purpose |
| P-W-2891 Revision A:2002 | Wipe Solvents, Exempt and Non-Exempt |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| SAE AMS3263A | Sealing Compound, Polythioether, Ambient Cure or Immediate Heat Cure For Aircraft Structures, Fuel Resistant with Intermittent Use to 400°CF (204°CC) |
| SAE AMS3726/2B | Shims, Filled Resin Compound Precatalyzed Sheet |
| SAE AMS3100D | Adhesion Promoter For Polysulfide Sealing Compounds |
| SAE AS1301F | Adapters - Port Connection, Ring Locked Design, Installation and Removal of |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| SAE MA2114B | Adapter - Port Connection, Ring Locked Installation and Removal of |
| MIL-DTL-18264 Revision E:2015 | Finishes, Organic, Weapons Systems, Application and Control of |
| SAE AMS3259B | Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C) |
| SAE AS5551B | Fitting Assembly - 24° Cone Flareless per AS5827, 5080 psi, Port Connection, Port Preparation, Installation and Removal of AS5550 and AS5865 |
| NASA MSFC SPEC 3659 : 2012 | PROCESS SPECIFICATION FOR ELECTRICAL BONDING |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| SAE AMS3277J | Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE ARP4118A | Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AMS3092A | Release Agent, for Use During Form-In-Place Gasket Preparation |
| SAE AMS3167B | Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, or Sealing Compounds |
| SAE AMS3379A | Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels |
| SAE AMSC27725D | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C) |
| SAE AMS4911N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| MIL-PRF-85285 Revision E:2012 | Topcoat, Aircraft and Support Equipment |
| MIL-PRF-23377 Revision K:2012 | Primer Coatings: Epoxy, High-Solids |
| SAE AMS4045L | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS5516P | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated |
| SAE AS5127/1C | Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds |
| SAE AMS3100D | Adhesion Promoter For Polysulfide Sealing Compounds |
| SAE AMS3020A | Oil, Reference, for “L” Stock Rubber Testing |
| SAE AMS2629E | Fluid, Jet Reference |
| SAE AS5502D | Standard Requirements for Aerospace Sealants and Adhesion Promoters |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| SAE AS5127B | Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens |
Summarise
Sorry this product is not available in your region.