• There are no items in your cart

SAE AS 1701 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

LUBRICANT, SOLID FILM
Available format(s)

Hardcopy , PDF

Superseded date

05-02-2022

Language(s)

English

Published date

01-10-2017

1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES

This document covers the performance requirements for solid dry film lubricants, air dried or heat cured, for use in aerospace applications.

Committee
E-25
DocumentType
Revision
Pages
9
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

MS27082 Revision E:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
MS27057 Revision E:2013 Adapter Assembly, Flared, 90 Degrees Elbow, Tube to Hose - with Swivel Nut
MS27072 Revision F:2013 WIRE, RETAINER
MS27385 Revision C:2013 Adapter Assembly, Flareless, 90 Degrees Forged Elbow, Tube to Hose - with Swivel Nut
MS27382 Revision C:2013 Adapter Assembly, Flareless, 45 Degree Elbow, Tube to Hose-with Swivel Nut
MS27381 Revision C:2013 Adapter, Assembly, Flareless, Straight, Tube to Hose - with Swivel Nut
MS27086 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut
MS27060 Revision E:2013 Adapter Assembly, Flared, 90 Degrees Forged Elbow, Tube to Hose-with Swivel Nut
MS27087 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut
MS27383 Revision C:2014 ADAPTER ASSEMBLY, FLARELESS, 90 DEGREES ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
MS27056 Revision E:2013 Adapter Assembly, 45 Degrees Elbow, Swivel Flange to Hose
MS27076 Revision E:2013 Nipple, Straight, Swivel Flange
MS27387 Revision D:2013 Elbow Subassembly, Flareless, 45 Degrees, Swivel Nut
SAE AS 4723 : 2012 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR
MIL-DTL-27272 Revision D:2015 Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for
MS27055 Revision E:2013 Adapter Assembly, Flared, 45 Degrees Elbow, Tube to Hose - with Swivel Nut
MS27061 Revision D:2013 Nipple Subassembly, Flared, Straight - with Swivel Nut
SAE J 2485 : 2012 FASTENER PART STANDARD - MACHINE SCREW NUTS (METRIC AND INCH)
SAE AS 5878 : 2013 NUT, SELF-LOCKING, NICKEL ALLOY, UNS N07001, 1400 DEGREES F, 180,000 PSI, UNJ THREAD PROCUREMENT SPECIFICATION
MS27389 Revision D:2014 ELBOW SUB ASSEMBLY, FLARELESS, 45 DEGREES FORGED, SWIVEL NUT
MS27067 Revision D:2013 Elbow Subassembly, Flared, 45 Degrees Forged, Swivel Nut
MS27064 Revision E:2014 ELBOW SUBASSEMBLY, SWIVEL FLANGE, 45 DEGREES
MS27075 Revision D:2013 NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
MS27071 Revision D:2013 UNION, NIPPLE
MS27068 Revision D:2013 Elbow Subassembly, Flared, 90 Degrees Forged, Swivel Nut
MS27390 Revision C:2013 Elbow Subassembly, Flareless, 90 Degrees, Forged, Swivel Nut
MS27058 Revision E:2013 Adapter Assembly, 90 Degrees Elbow, Swivel Flange to Hose
MS27384 Revision C:2014 ADAPTOR ASSEMBLY, FLARELESS, 45 DEGREES FORGED ELBOW, TUBE TO HOSE - WITH SWIVEL NUT
MS27065 Revision F:2013 Elbow Subassembly, Flared, 90 Degrees, Swivel Nut
MS27062 Revision D:2013 Nipple Subassembly, Straight, Swivel Flange
SAE AS 85720 : 2018 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR
SAE AS 4417A : 2014 NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION
SAE AS 4726 : 2017 NUTS, SELF-LOCKING, UNS S66286 CLASSIFICATION: 220 KSI/850 DEGREE F PROCUREMENT SPECIFICATION
MS27070 Revision E:2013 SLEEVE, HOSE COUPLING
MS27391 Revision F:2013 Nipple, Flareless, Tube to Hose - Swivel Nut
SAE ARP 5824 : 2013 RECOMMENDED SOLID FILM LUBRICANTS FOR FLUID SYSTEM COMPONENTS
MS27063 Revision F:2013 Elbow Subassembly, Flared, 45 Degrees, Swivel Nut
SAE AS 5272 : 2016 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
MS27053 Revision E:2013 Adapter Assembly, Flared, Straight, Tube to Hose - with Swivel Nut
MS27394 Revision C:2014 ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
SAE J 2484 : 2012 FASTENER PART STANDARD - MACHINE SCREWS
SAE AIR 869 : 2014 V-COUPLINGS, INCLUDING V-BAND AND V-RETAINER COUPLING ASSEMBLIES, FLANGE AND SEAL DESIGN, APPLICATION OF
SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
SAE J 2271M : 2015 SHIP SYSTEMS AND EQUIPMENT - PART STANDARD FOR STUDS - CONTINUOUS AND DOUBLE END (METRIC)
SAE AS 4892 : 2012 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR
SAE ARP 700 : 1997(R2006) HIGH STRENGTH ELEVATED TEMPERATURE BOLTING PRACTICE
MS27066 Revision F:2013 Elbow Subassembly, Swivel Flange, 90 Degrees
MS27388 Revision D:2014 ELBOW SUBASSEMBLY, FLARELESS, 90 DEGREES, SWIVEL NUT
SAE J 2270 : 2016 SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE
MS27386 Revision C:2013 Nipple Subassembly, Flareless, Straight - with Swivel Nut
MS27054 Revision E:2013 Adapter Assembly, Straight, Swivel Flange to Hose
MS27069 Revision H:2017 SOCKET, HOSE COUPLING
MS27059 Revision E:2013 Adapter Assembly, Flared, 45 Degrees Forged Elbow, Tube to Hose - with Swivel Nut
MS27395 Revision D:2014 ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT
MS27084 Revision D:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES
SAE ARP 4058 : 2017 GENERAL SPECIFICATION GUIDE FOR MECHANICAL GEARED ROTARY ACTUATORS
SAE J 2656 : 2016 Fastener Part Standard - Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned<br>
SAE J 2295 : 2016 FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED)

SAE AMS 1424 : 2016 FLUID, AIRCRAFT DEICING/ANTI-ICING, SAE TYPE 1
MIL-DTL-5624 Revision W:2016 TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
SAE AMS 2488 : 2000 ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
ASTM D 1141 : 1998 : EDT 1 Standard Practice for the Preparation of Substitute Ocean Water
MIL-DTL-16232 Revision G:2000 PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
MIL-PRF-7808 Revision L:1997 LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
ASTM E 595 : 2015 : REDLINE Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
MIL-DTL-5541 Revision F:2006 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
VV-D-1078 Revision B:1983 DAMPING FLUID, SILICONE BASE (DIMETHYL POLYSILOXANE)
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
ASTM D 7091 : 2013 : REDLINE Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
ASTM D 2512 : 2017 Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2023)
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test
O-M-232 Revision M:2016 METHANOL (METHYL ALCOHOL)

View more information
US$97.94
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.