• There are no items in your cart

SAE J 429 : 2014

Current
Current

The latest, up-to-date edition.

MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

05-07-2014

1. SCOPE
2. REFERENCES
3. DESIGNATIONS
4. MATERIALS AND PROCESSES
5. MECHANICAL REQUIREMENTS
6. METHODS OF TEST
7. PRODUCT MARKING - BOLTS AND SCREWS
8. TEST REQUIREMENTS
9. NOTES
APPENDIX A

Specifies the mechanical and material requirements for inch-series steel bolts, screws, studs, screws for sems, and U-bolts in sizes to 1-1/2 in. inclusive.

DocumentType
Revision
Pages
14
PublisherName
SAE International
Status
Current
Supersedes

A-A-59438 Revision A:2013 PLAYPIPE: NOZZLE, FIRE HOSE
10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
SAE J 2295 : 2016 FASTENER PART STANDARD - CAP SCREWS, HEX, HEAVY HEX AND HEAVY HEX STRUCTURAL BOLTS, AND HEX NUTS (INCH DIMENSIONED)
SAE J 1040 : 2003 PERFORMANCE CRITERIA FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR CONSTRUCTION, EARTHMOVING, FORESTRY, AND MINING MACHINES
MIL-DTL-24696 Revision C:2008 GASKET, SHEET, NON-ASBESTOS
MIL-A-52940 Revision C:1987 AEROSOL GENERATOR, NON-THERMAL, INSECTICIDE, ULTRA LOW VOLUME
MIL-C-555 Revision L:1991 COMPRESSOR, AIR RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
A-A-52512 Base Document:1995 WINCH, DRUM POWER OPERATED, 1-TON PULL, PNEUMATIC
MIL-DTL-45912 Revision B:2013 BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL
SAE AS 4775 : 2017 AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
SAE J 58 : 2015 FLANGED 12-POINT SCREWS
SAE J 2194 : 2016 ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS
BS EN ISO 10442:2002 Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
MIL-A-52767 Revision D:1989 AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT
MIL-P-52327 Revision C:1990 PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING
MIL-DTL-1222 Revision J:2000 STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
SAE J518/1:2023 Hydraulic Flange Tube, Pipe, and Hose Connections Four-Screw Flange Connection - Part 1: 3.5 to 35 MPa (Code 61)
ASME B18.5 : 2012 : R2017 ROUND HEAD BOLTS (INCH SERIES)
MIL-S-63540 Revision C:1995 STUD, SELF-CLINCHING GENERAL SPECIFICATION FOR
FF-S-85 Revision D:2005 Screw, Cap, Slotted and Hexagon Head
MIL-DTL-45913 Revision D:2011 NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE
ASME B18.5 : 2012 ROUND HEAD BOLTS (INCH SERIES)
MIL-B-45908 Revision B:1985 BOLT, EYE, GENERAL SPECIFICATION FOR
GG-T-35 Revision C:1989 TABLE; DRAWING, TRACING, AND SCRIBING
MIL-H-4607 Revision E:1987 HEATER, ENGINE AND SHELTER, GROUND
MIL B 45912 : A BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
MIL C 00555 : K COMPRESSORS, AIR, RECIPROCATING AND ROTARY, DIESEL ENGINE DRIVEN
11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
MIL S 1222 : H STUD, BOLTS, HEX CAP SCREWS, SOCKET HEAD CAP SCREWS AND NUTS
MIL-P-10360 Revision G:1993 PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER
MIL-P-52746 Revision C:1994 PUMP ASSEMBLY, FLAMMABLE LIQUID, CENTRIFUGAL, SELF PRIMING 2 INCH 100 GPM AT 100 FEET TOTAL DYNAMIC HEAD
ASTM D 5657 : 2007 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
ASTM F 2437/F2437M : 2017 : REDLINE Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
AGMA 6001 : REV D : 1997 DESIGN AND SELECTION OF COMPONENTS FOR ENCLOSED GEAR DRIVES
IFI 124 : 2002 TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS
IFI 160 : 2007 TEST PROCEDURE FOR THE PERFORMANCE OF NUTS WITH PRE-APPLIED ADHESIVE COATED THREADS - INCH SERIES
SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
ASTM F 1510 : 2007 : R2013 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM D 5648 : 2001 : R2008 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 5648 : 2001 : R2014 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
AWWA C541 : 2016 HYDRAULIC AND PNEUMATIC CYLINDER AND VANE-TYPE ACTUATORS FOR VALVES AND SLIDE GATES
I.S. EN ISO 10441:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - FLEXIBLE COUPLINGS FOR MECHANICAL POWER TRANSMISSION - SPECIAL-PURPOSE APPLICATIONS
API 671 : 2007 SPECIAL PURPOSE COUPLINGS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
CSA C83 : 2017 COMMUNICATION AND POWER LINE HARDWARE
SAE J 1102 : 2016 MECHANICAL AND MATERIAL REQUIREMENTS FOR WHEEL BOLTS
SAE J 518 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE
FF-C-450 Revision G:2017 CLAMPS, WIRE ROPE
ANSI/HI 9.6.2 : 2015 ROTODYNAMIC PUMPS FOR ASSESSMENT OF APPLIED NOZZLE LOADS
MIL V 12126 : E VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI
MS51868 Revision E:2017 CLAMP, WIRE ROPE, DOUBLE SADDLED, DOUBLE-GRIP, STEEL, TYPE 3
MIL-D-63303 Revision B:1988 DISPENSER, MINE, GROUND VEHICLE, M128
ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
SAE J 1194 : 2016 ROLLOVER PROTECTIVE STRUCTURES (ROPS) FOR WHEELED AGRICULTURAL TRACTORS
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
API 671 : 2007 : R2010 SPECIAL PURPOSE COUPLINGS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES
ASTM F 1510 : 2007 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
MIL-P-52405 Revision C:1990 PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER)
BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
CSA G401 : 2014 CORRUGATED STEEL PIPE PRODUCTS
CSA B242 : 2005 GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS
AGMA 6001 : REV D : 1997 : R2003 DESIGN AND SELECTION OF COMPONENTS FOR ENCLOSED GEAR DRIVES
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
ASCE 16 95 : 1996 STANDARD FOR LOAD AND RESISTANCE FACTOR DESIGN (LRFD) FOR ENGINEERED WOOD CONSTRUCTION
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
MSS SP 127 : 2014 BRACING FOR PIPING SYSTEMS: SEISMIC - WIND - DYNAMIC DESIGN, SELECTION, AND APPLICATION
SAE J 2486 : 2013 TENSION INDICATING WASHER TIGHTENING METHOD FOR FASTENERS
CSA S16 : 2014 DESIGN OF STEEL STRUCTURES
ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
BS EN ISO 10441:2007 Petroleum, petrochemical and natural gas industries. Flexible couplings for mechanical power transmission. Special-purpose applications
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
CSA O86 : 2014 ENGINEERING DESIGN IN WOOD
ISO 10442:2002 Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors
ISO 10441:2007 Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 10441:2007 Petroleum, petrochemical and natural gas industries - Flexible couplings for mechanical power transmission - Special-purpose applications (ISO 10441:2007)
EN ISO 10442:2002 Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors (ISO 10442:2002)
SAE J 1199 : 2013 MECHANICAL AND MATERIAL REQUIREMENTS FOR METRIC EXTERNALLY THREADED STEEL FASTENERS
ASTM D 5648 : 2001 : R2019 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D 5657 : 2007 : R2014 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
MIL-S-12511 Revision G:1983 SPRAYER, INSECTICIDE, FRAME MOUNTED, GASOLINE ENGINE DRIVEN, MIST AND SOLID STREAM, 180 GPH
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
MIL N 45913 : B NUTS, SELF LOCKING, HEXAGON, PREVAILING-TORQUE
IFI 136 : 2006 STUDS AND BENT BOLTS
16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
SAE J 1965 : 2017 ROAD VEHICLES - WHEELS FOR COMMERCIAL VEHICLES AND MULTIPURPOSE PASSENGER VEHICLES - FIXING NUTS - TEST METHODS
MIL-STD-2193 Revision C:2012 Ship Hydraulic System Components
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
ANSI/AWWA D103 : 2009 FACTORY-COATED BOLTED CARBON STEEL TANKS FOR WATER STORAGE
DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
MIL-C-11071 Revision D:1983 CLEANING MACHINE, FUEL CAN, DRUM
AGMA 6001 : D DESIGN AND SELECTION OF COMPONENTS FOR ENCLOSED GEAR DRIVES
CSA B352.0 : 2016 ROLL-OVER PROTECTIVE STRUCTURES (ROPS), FALLING OBJECT PROTECTIVE STRUCTURES (FOPS), OPERATOR PROTECTIVE STRUCTURES (OPS), AND TIP-OVER PROTECTIVE STRUCTURES (TOPS) FOR MOBILE MACHINERY - GENERAL CANADIAN REQUIREMENTS
N287.2-17 Material requirements for concrete containment structures for nuclear power plants
CSA B242 : 2005 : R2016 GROOVE- AND SHOULDER-TYPE MECHANICAL PIPE COUPLINGS
SAE J 238 : 2017 NUT AND CONICAL SPRING WASHER ASSEMBLIES
ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
IFI 124 : 2002 : R2013 TEST PROCEDURE FOR THE PERFORMANCE OF NONMETALLIC RESISTANT ELEMENT PREVAILING-TORQUE SCREWS
DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
SAE J 935 : 2009 HIGH STRENGTH CARBON AND ALLOY DIE DRAWN STEELS
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASTM D 5648 : 2001 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
SAE J518/2:2023 Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection - Part 2: 42 MPa (Code 62)
API RP 697:2023 Pump Repair
ASME B18.31.2 : 2014 CONTINUOUS THREAD STUD, DOUBLE-END STUD, AND FLANGE BOLTING STUD (STUD BOLT) (INCH SERIES)

ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
SAE J 403 : 2014 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE J 409 : 1995 PRODUCT ANALYSIS - PERMISSIBLE VARIATIONS FROM SPECIFIED CHEMICAL ANALYSIS OF A HEAT OR CAST OF STEEL
SAE J 411 : 2015 CARBON AND ALLOY STEELS
SAE J 1268 : 2010 HARDENABILITY BANDS FOR CARBON AND ALLOY H STEELS
SAE J 417 : 1983 HARDNESS TESTS AND HARDNESS NUMBER CONVERSIONS
ASTM F 2328 : 2017 : REDLINE Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
SAE J 404 : 2009 CHEMICAL COMPOSITIONS OF SAE ALLOY STEELS
ASME B18.18 : 2017 QUALITY ASSURANCE FOR FASTENERS
SAE J 995 : 2012 MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS

View more information
US$119.18
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.