UNE-EN 71-5:2016

Cooperating organizations
National foreword
EN Foreword
Introduction
1. Scope
2. Normative references
3. Definitions
3.1 Plaster of Paris (gypsum) moulding set
3.2 Ceramic and vitreous enamelling materials supplied
      in miniature workshop set
3.3 Oven hardening plasticized PVC-modelling clay set
3.4 Plastic moulding set
3.5 Embedding set
3.6 Photographic developing set
3.7 Adhesives, paints, lacquers, varnishes, thinners
      and cleaning agents supplied or recommended in
      model sets
3.7.1 Adhesive
3.7.2 Water-based paint
3.7.3 Paints and lacquers containing solvents
3.7.4 Varnishes
3.7.5 Thinners and cleaning agents (solvents)
4. Plaster of Paris (gypsum) moulding sets
4.1 Marking
4.2 Safety rules
5. Ceramic and vitreous enamelling materials supplied
    in miniature workshop sets
5.1 Chemical preparations
5.2 Marking
5.3 Safety rules
6. Oven hardening plasticized PVC-modelling clay sets
6.1 Chemical substances
6.2 Marking
6.3 Safety rules
7. Plastic moulding sets
7.1 Polystyrene granules
7.1.1 Chemical substances
7.1.2 Marking
7.1.3 Safety rules
7.2 Embedding sets
7.2.1 Packaging
7.2.2 Marking
7.2.3 Safety rules
8. Photographic processing sets
8.1 Chemical substances and preparations
8.2 Packaging
8.3 Marking
8.3.1 Marking of the outer packaging
8.3.2 Marking of the individual packaging
8.4 Safety rules
9. Adhesives, paints, lacquers, varnishes, thinners and
    cleaning agents (solvents) supplied or recommended
    in model sets
9.1 General
9.2 Adhesives
9.2.1 Water-based adhesives
9.2.1.1 Liquid adhesives for paper and wood
9.2.1.1.1 Packaging
9.2.1.1.2 Marking
9.2.1.2 Adhesive sticks for paper
9.2.1.2.1 Packaging
9.2.1.2.2 Marking
9.2.2 Solvent-based adhesives
9.2.2.1 Multi-purpose adhesives
9.2.2.2 Contact adhesives
9.2.2.3 Special adhesives
9.2.2.4 Packaging
9.2.2.5 Marking
9.2.2.6 Safety rules
9.3 Water-based paints and lacquers
9.3.1 Packaging
9.3.2 Marking
9.3.3 Safety rules
9.4 Solvent-based paints, lacquers, thinners and
      cleaning solvents
9.4.1 Packaging
9.4.2 Marking
9.4.3 Safety rules
10. Marking
10.1 Marking of the outer packaging
10.1.1 Manufacturer's identification
10.1.2 Warning and caution phrases
10.2 Marking of individual containers and packaging
11. Instructions for use
11.1 General
11.2 Contents list
11.3 Advice for adult supervision
11.4 Safety rules
11.5 Instructions for carrying out of activities
11.6 Spills and disposal of chemicals
National appendix NA
National appendix NB

This European Standard specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are:

those classified as dangerous by the EC-legislation applying to dangerous substances and dangerous mixtures [5];

substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and

any other chemical substance(s) and mixture(s) delivered with the chemical toy.

NOTEThe terms substance and mixture are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.

Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.

This Part of EN 71 applies to:

plaster of Paris (gypsum) moulding sets;

oven-hardening plasticised PVC modelling clay sets;

plastic moulding sets;

embedding sets;

adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets.