VDI 2441:2016-05
Current
The latest, up-to-date edition.
Process gas and waste gas cleaning by cold plasma - Barrier discharge, corona discharge, UV radiation
Hardcopy , PDF
German - English
05-01-2016
Preliminary note
1 Scope
2 Terms and definitions
3 Symbols
4 Ionisation and plasma
5 Process modules
6 Notes on system design and configuration
7 Emission measurement instructions
8 Notes on technical warranty/guaranteed
performance data
9 Example systems
Bibliography
Gives information on the design, construction and operation of non-thermal plasma systems for air pollution control applications.
DocumentType |
Standard
|
Pages |
52
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
VDI 3928:2017-01 | Waste gas cleaning by chemisorption |
VDI 2260:2003-10 | Technical warranty for gas cleaning equipment - Particulate and gaseous matter |
DIN EN 50290-1-2:2005-10 | COMMUNICATION CABLES - PART 1-2: DEFINITIONS |
EN 60873-2:2004 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing |
IEC 60873-2:2004 | Electrical and pneumatic analogue chart recorders for use in industrial process control systems - Part 2: Guidance for inspection and routine testing |
ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
DIN EN 14791:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
EN 14791:2017 | Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method |
IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
VDI 2310 Blatt 15:2001-12 | Maximum immission values referring to human health - Maximum immission concentrations for ozone |
CEN/TS 13649:2014 | Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption |
VDI 3880:2011-10 | Olfactometry - Static sampling |
DIN EN 14790:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
DIN EN 1911:2010-12 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
VDI 3882 Blatt 2:1994-09 | Olfactometry - Determination of hedonic odour tone |
VDI 3476 Blatt 1:2015-06 | Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals |
EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
EN 13725:2003/AC:2006 | AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY |
EN 14625:2012 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
DIN CEN/TS 13649;DIN SPEC 33969:2015-03 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - SORPTIVE SAMPLING METHOD FOLLOWED BY SOLVENT EXTRACTION OR THERMAL DESORPTION |
EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
VDI 3884 Blatt 1:2015-02 | Olfactometry - Determination of odour concentration by dynamic olfactometry - Supplementary instructions for application of DIN EN 13725 |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
DIN EN 14625:2012-12 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
DIN EN ISO 23210:2009-12 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
EN 15058:2017 | Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry |
EN 60873-1:2004 | Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation |
VDE 0410-1 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
EN 12619:2013 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
DIN EN 13284-1:2015-12 (Draft) | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
EN 1911:2010 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
EN 50290-1-2:2004 | Communication cables - Part 1-2: Definitions |
DIN EN 60873-1 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION |
DIN EN 12619:2013-04 | Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method |
DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
VDI 3951:2013-09 | Overview on relevant regulations on the performance of emission measurements |
EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
VDE 0410-2 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
PREN 13649 : DRAFT 2011 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF INDIVIDUAL GASEOUS ORGANIC COMPOUNDS - ACTIVATED CARBON AND SOLVENT DESORPTION METHOD |
DIN EN 15058:2006-09 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
VDI 3477:2016-03 | Biological waste gas purification - Biofilters |
DIN EN 60873-2 : 2004 | ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING |
DIN EN 13725:2003-07 | Air quality - Determination of odour concentration by dynamic olfactometry |
VDI 3882 Blatt 1:1992-10 | Olfactometry; determination of odour intensity |
VDI 2066 Blatt 1:1975-10 | Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals |
EN ISO 23210:2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
VDI 3478 Blatt 2:2008-04 | Biological waste gas purification - Biological trickle bed-reactors |
DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
IEC 60873-1:2003 | Electrical and pneumatic analogue chart recorders for use in industrial-process systems - Part 1: Methods for performance evaluation |
VDI 3478 Blatt 1:2011-03 | Biological waste gas purification - Bioscrubbers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.