IEC 60112:2003+AMD1:2009 CSV
|
Method for the determination of the proof and the comparative tracking indices of solid insulating materials
|
IEC 60320-1:2015
|
Appliance couplers for household and similar general purposes - Part 1: General requirements
|
IEC 60255-21-2:1988
|
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests
|
IEC 60038:2009
|
IEC standard voltages
|
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources
|
IEC 60384-14:2013+AMD1:2016 CSV
|
Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
|
IEC 60695-2-1:1991
|
Fire hazard testing - Part 2: Test methods - Section 1: Glow-wire test and guidance
|
IEC 60417-1:2002
|
Graphical symbols for use on equipment - Part 1: Overview and application
|
IEC 60297-1:1986
|
Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1: Panels and racks
|
IEC 60950:1999
|
Safety of information technology equipment
|
IEC 60255-21-3:1993
|
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests
|
IEC 61293:1994
|
Marking of electrical equipment with ratings related to electrical supply - Safety requirements
|
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
|
IEC 60695-2-3:1984
|
Fire hazard testing. Part 2: Test methods. Bad-connection test with heaters
|
IEC GUIDE 106:1996
|
Guide for specifying environmental conditions for equipmentperformance rating
|
IEC 61008-1:2010+AMD1:2012+AMD2:2013 CSV
|
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules
|
IEC 60825-1:2014
|
Safety of laser products - Part 1: Equipment classification and requirements
|
IEC 61810-1:2015
|
Electromechanical elementary relays - Part 1: General and safety requirements
|
IEC 62103:2003
|
Electronic equipment for use in power installations
|
IEC 60269-1:2006+AMD1:2009+AMD2:2014 CSV
|
Low-voltage fuses - Part 1: General requirements
|
IEC 60068-2-31:2008
|
Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
|
IEC 60085:2007
|
Electrical insulation - Thermal evaluation and designation
|
IEC 60352-1:1997
|
Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
|
ISO 262:1998
|
ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
|
IEC 61180-2:1994
|
High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
|
IEC 60068-2-3:1969
|
Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
|
IEC 60707:1999
|
Flammability of solid non-metallic materials when exposed to flame sources - List of test methods
|
IEC 60146-1-1:2009
|
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
|
ISO 780:2015
|
Packaging Distribution packaging Graphical symbols for handling and storage of packages
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
IEC 60755:2017
|
General safety requirements for residual current operated protective devices
|
IEC 60417-2:1998
|
Graphical symbols for use on equipment - Part 2: Symbol originals
|
IEC 60721-3-2:1997
|
Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
|
IEC 60068-2-2:2007
|
Environmental testing - Part 2-2: Tests - Test B: Dry heat
|
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
|
IEC 60255-5:2000
|
Electrical Relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests
|
IEC 60364-6-61:2001
|
Electrical installations of buildings - Part 6-61: Verification - Initial verification
|
ISO 4046:1978
|
Paper, board, pulp and related terms — Vocabulary
|
IEC 60255-21-1:1988
|
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)
|
IEC 60071-2:1996
|
Insulation co-ordination - Part 2: Application guide
|
ISO 261:1998
|
ISO general purpose metric screw threads General plan
|
IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV
|
Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
|
IEC 60352-2:2006+AMD1:2013 CSV
|
Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance
|
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
|
IEC 60068-2-28:1990
|
Environmental testing - Part 2: Tests. Guidance for damp heat tests
|
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
|
IEC 60060-1:2010
|
High-voltage test techniques - Part 1: General definitions and test requirements
|
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment
|
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules
|
IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV
|
Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
|
ISO 3864:1984
|
Safety colours and safety signs
|
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
|
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
|
IEC 60990:2016
|
Methods of measurement of touch current and protective conductor current
|
IEC 60654-3:1983
|
Operating conditions for industrial-process measurement and control equipment - Part 3: Mechanical influences
|
IEC 60721-3-1:1997
|
Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage
|