EN 9100:2009
|
Quality Management Systems - Requirements for Aviation, Space and Defense Organizations
|
ISO 5855-1:1999
|
Aerospace MJ threads Part 1: General requirements
|
EN 3311:2009
|
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bar for machining - D < 110 mm
|
SAE AMS 2488 : 2000
|
ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
|
EN 2603 : 2005
|
AEROSPACE SERIES - PORT ENDS FOR ADAPTORS, THREADED, WITH LOCKRING - GEOMETRIC CONFIGURATION
|
EN 4315:2007
|
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Solution treated and precipitation treated, bar and section a or D ≤ 100 mm, Rm ≥ 900 MPa
|
EN 4317:2007
|
Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated, forging stock a or D ≤ 200 mm
|
EN 2491:2011
|
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods
|
EN 2608 : 2005
|
AEROSPACE SERIES - INSTALLATION AND REMOVAL REQUIREMENTS FOR 8 DEGREE 30 MINUTES ADAPTORS, THREADED, WITH LOCKRING
|
EN 3079:2006
|
Aerospace series - Pipe coupling 8°30' up to 28 000 kPa - Adaptors - Metric series - Technical specification
|
SAE AMS 4965 : 2014
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
|
SAE AMS 5734 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
|
ISO 7169:2014
|
Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric
|
ISO 5855-3:1999
|
Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems
|
SAE AMS 5731 : 2012
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
|
EN 2645 : 2005
|
AEROSPACE SERIES - LOCKRINGS FOR ADAPTORS, THREADED, WITH LOCKRING - DIMENSIONS
|
EN 2424:2008
|
Aerospace series - Marking of aerospace products
|
EN 2606 : 2009
|
AEROSPACE SERIES - 60 DEGREES INTERFACE FOR ADAPTORS, THREADED, WITH LOCKRING - GEOMETRIC CONFIGURATION
|
ISO 286-2:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
|
ISO 3601-1:2012
|
Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes
|
EN 2602 : 2005
|
AEROSPACE SERIES - PORTS FOR ADAPTORS, THREADED, WITH LOCKRING - GEOMETRIC CONFIGURATION
|
SAE AMS 4967 : 2014
|
TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
|
SAE AMS 4928 : 2016
|
TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
|