DIN EN 16457 E : 2014
Current
The latest, up-to-date edition.
CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT
08-04-2014
National foreword<br>Foreword<br>Introduction<br>1 Scope<br>2 Normative references<br>3 Terms and definitions<br>4 Defining a waste testing programme<br>5 Carrying out a waste testing programme <br>6 Overall testing report <br>Annex A (normative) - Matrix testing steps versus<br> parameters specifying the standards to be<br> used in a waste testing programme <br>Annex B (informative) - A-deviations<br>Bibliography
Defines requirements for a waste testing programme regarding mainly objectives, planning and report with the intent to ensure reliable and comparable results when using the reference methods that have been developed and/or adopted by CEN/TC 292.
DocumentType |
Standard
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Current
|
Standards | Relationship |
EN 16457:2014 | Identical |
CEN/TR 15310-2 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 2: GUIDANCE ON SAMPLING TECHNIQUES |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
EN 15875:2011/AC:2012 | CHARACTERIZATION OF WASTE - STATIC TEST FOR DETERMINATION OF ACID POTENTIAL AND NEUTRALISATION POTENTIAL OF SULFIDIC WASTE |
EN 12457-2:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 4 mm (without or with size reduction) |
CEN/TR 16176:2011 | Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification |
ISO 11074:2015 | Soil quality — Vocabulary |
CEN/TR 16130:2011 | Characterization of waste - On-site verification |
CEN/TR 16365:2012 | Characterization of waste - Sampling of waste from extractive industries |
EN 16377:2013 | Characterization of waste - Determination of brominated flame retardants (BFR) in solid waste |
CEN/TR 16363:2012 | Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries |
CEN/TR 15310-1 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 1: GUIDANCE ON SELECTION AND APPLICATION OF CRITERIA FOR SAMPLING UNDER VARIOUS CONDITIONS |
PREN 15863 : DRAFT 2013 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TEST FOR BASIC CHARACTERIZATION - DYNAMIC MONOLITHIC LEACHING TEST WITH PERIODIC LEACHANT RENEWAL, UNDER FIXED TEST CONDITIONS |
EN 14735:2005/AC:2006 | CHARACTERIZATION OF WASTE - PREPARATION OF WASTE SAMPLES FOR ECOTOXICITY TESTS |
EN 13137 : 2001 | CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS |
EN 15308:2016 | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection |
EN 14582:2016 | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
EN 12457-4:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with size reduction) |
EN 14346:2006 | CHARACTERIZATION OF WASTE - CALCULATION OF DRY MATTER BY DETERMINATION OF DRY RESIDUE OR WATER CONTENT |
CEN/TR 15018:2005 | Characterization of waste - Digestion of waste samples using alkali-fusion techniques |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
CEN/TS 15864:2015 | Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) |
EN 12457-1:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
EN 15192:2006 | Characterisation of waste and soil - Determination of Chromium(VI) in solid material by alkaline digestion and ion chromatography with spectrophotometric detection |
ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
EN 16192:2011 | Characterization of waste - Analysis of eluates |
EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
CEN/TR 16110:2010 | Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste |
EN 12920:2006+A1:2008 | Characterization of waste - Methodology for the determination of the leaching behaviour of waste under specified conditions |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
EN 15002:2015 | Characterization of waste - Preparation of test portions from the laboratory sample |
EN 15169:2007 | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
EN 13656 : 2002 | CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
EN 14345 : 2004 | CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT BY GRAVIMETRY |
EN 12457-3:2002 | Characterisation of waste - Leaching - Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4 mm (without or with size reduction) |
EN 14039 : 2004 | CHARACTERIZATION OF WASTE - DETERMINATION OF HYDROCARBON CONTENT IN THE RANGE OF C[10] TO C[40] BY GAS CHROMATOGRAPHY |
EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
EN 15527:2008 | Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) |
CEN/TS 16229:2011 | Characterization of waste - Sampling and analysis of weak acid dissociable cyanide discharged into tailings ponds |
CEN/TS 16023:2013 | Characterization of waste - Determination of gross calorific value and calculation of net calorific value |
PREN 14997 : DRAFT 2013 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH CONTINUOUS PH CONTROL |
CEN/TS 14405 : 2004 | CHARACTERIZATION OF WASTE - LEACHING BEHAVIOUR TESTS - UP-FLOW PERCOLATION TEST (UNDER SPECIFIED CONDITIONS) |
CEN/TR 15310-3 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 3: GUIDANCE ON PROCEDURES FOR SUB-SAMPLING IN THE FIELD |
CEN/TS 15862:2012 | Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions |
EN 15216:2007 | Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates |
EN 14899:2005 | Characterization of waste - Sampling of waste materials - Framework for the preparation and application of a Sampling Plan |
CEN/TR 15310-4 : 2006 | CHARACTERIZATION OF WASTE - SAMPLING OF WASTE MATERIALS - PART 4: GUIDANCE ON PROCEDURES FOR SAMPLE PACKAGING, STORAGE, PRESERVATION, TRANSPORT AND DELIVERY |
EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
CEN/TR 15310-5:2006 | Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan |
CEN/TS 15364:2006 | Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test |
PREN 14429 : DRAFT 2013 | CHARACTERISATION OF WASTE - LEACHING BEHAVIOUR TEST - INFLUENCE OF PH ON LEACHING WITH INITIAL ACID/BASE ADDITION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.