ISO/IEC Guide 99:2007
Current
Current
The latest, up-to-date edition.
International vocabulary of metrology Basic and general concepts and associated terms (VIM)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, Russian, English - French
Published date
12-14-2007
ISO/IEC Guide 99:2007 provides a set of definitions and associated terms, in English and French, for a system of basic and general concepts used in metrology, together with concept diagrams to demonstrate their relations. Additional information is given in the form of examples and notes under many definitions.
This Vocabulary is meant to be a common reference for scientists and engineers, as well as teachers and practitioners, involved in planning or performing measurements, irrespective of the level of measurement uncertainty and irrespective of the field of application. It is also meant to be a reference for governmental and inter-governmental bodies, trade associations, accreditation bodies, regulators and professional societies.
| DevelopmentNote |
Supersedes RM.AERO 80312 & RM.AERO 80313. (05/2015)
|
| DocumentType |
Guide
|
| Pages |
92
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS Q 10012:2011 | Identical |
| CEI UNI 70099 : 2010 | Identical |
| UNE-ISO/IEC GUIA 99:2012 IN | Identical |
| PKN ISO/IEC GUIDE 99 : 2010 | Identical |
| UNI CEI 70099 : 2008 | Identical |
| NF ISO/IEC GUIDE 99 : 2011 | Identical |
| NEN NPR ISO/IEC GUIDE 99 : 2008 | Identical |
| IS/ISO/IEC/Guide 99 : 2007 | Identical |
| 15/30293072 DC : 0 | BS EN ISO 6789-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHOD FOR DESIGN CONFORMANCE TESTING, QUALITY CONFORMANCE TESTING AND CALIBRATION PROCEDURE |
| DIN EN 1911:2010-12 | Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method |
| I.S. EN IEC 62828-1:2018 | REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| PREN 932-5 : DRAFT 2009 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| BS EN ISO 384:2015 | Laboratory glass and plastics ware. Principles of design and construction of volumetric instruments |
| CSA C22.2 No. 80601-2-56 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT |
| 09/30165942 DC : 0 | BS ISO 21438-3 - WORKPLACE ATMOSPHERES - DETERMINATION OF INORGANIC ACIDS BY ION CHROMATOGRAPHY - PART 3: HYDROFLUORIC ACID AND PARTICULATE FLUORIDES |
| AAMI ISO 11607-1 : 2006 : R2010 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| DIN EN ISO 6789-2 E : 2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINTY (ISO 6789-2:2017) |
| I.S. EN 60193:2000 | HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - MODEL ACCEPTANCE TESTS (IEC 60193:1999) |
| 12/30258955 DC : 0 | BS ISO 16610-22 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS |
| BS EN 60846-1:2014 | Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors |
| DIN EN ISO 16610-1 E : 2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| BS EN 61788-6:2011 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors |
| UNE-EN ISO 4787:2011 | Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) |
| 13/30294309 DC : 0 | BS ISO/CIE 19476 - CHARACTERIZATION OF THE PERFORMANCE OF ILLUMINANCE METERS AND LUMINANCE METERS |
| I.S. EN ISO 16610-28:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS |
| CEI EN 62209-2 : 2013 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| CEI EN 61788-13 : 2013 | SUPERCONDUCTIVITY - PART 13: AC LOSS MEASUREMENTS - MAGNETOMETER METHODS FOR HYSTERESIS LOSS IN SUPERCONDUCTING MULTIFILAMENTARY COMPOSITES |
| CEI EN 55016-2-2 : 2012 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| DIN EN ISO 16610-22:2016-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
| DIN EN ISO 16610-61:2016-04 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015) |
| 14/30295711 DC : 0 | BS EN IEC 61757-3-1 ED. 1.0 - FIBRE OPTIC SENSORS - PART 3-1: TEMPERATURE MEASUREMENT - DISTRIBUTED SENSING |
| DIN EN ISO 16610-85:2013-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| BS ISO 9696:2007 | Water quality. Measurement of gross alpha activity in non-saline water. Thick source method |
| 13/30287730 DC : 0 | BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS |
| 12/30256719 DC : 0 | BS ISO/ASTM 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECTS RELEASE PROGRAMS |
| UNE-EN ISO 10360-8:2017 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 8: CMMs with optical distance sensors (ISO 10360-8:2013) |
| DIN EN ISO 19115-2:2010-05 | GEOGRAPHIC INFORMATION - METADATA - PART 2: EXTENSIONS FOR IMAGERY AND GRIDDED DATA |
| UNE-EN ISO 384:2016 | Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015) |
| I.S. EN ISO 20553:2017 | RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL (ISO 20553:2006) |
| BS ISO 7503-1:2016 | Measurement of radioactivity. Measurement and evaluation of surface contamination General principles |
| CISPR TR 16-3:2010+AMD1:2012+AMD2:2015 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports |
| ASTM E 1965 : 1998 : R2009 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| 12/30255465 DC : 0 | BS ISO 12999-1 - ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION |
| 11/30217189 DC : 0 | BS EN ISO 4064-1 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| UNI EN ISO 10360-8 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS |
| BS EN ISO 4064-4:2014 | Water meters for cold potable water and hot water Non-metrological requirements not covered in ISO 4064-1 |
| 17/30341492 DC : 0 | BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS |
| BS EN ISO 13843:2017 | Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods |
| BS EN 62475:2010 | High-current test techniques. Definitions and requirements for test currents and measuring systems |
| I.S. EN ISO 16610-61:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS - GAUSSIAN FILTERS (ISO 16610-61:2015) |
| ISO/IEC 19761:2011 | Software engineering — COSMIC: a functional size measurement method |
| DIN EN ISO/IEC 17043 E : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| ECA 10-15 : 2015 | GUIDELINES ON THE CALIBRATION OF DIGITAL MULTIMETERS |
| DIN EN ISO 29661 : 2018 COR 1 2018 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015) |
| BS ISO 11665-1 : 2012 | MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR: RADON-222 - PART 1: ORIGINS OF RADON AND ITS SHORT-LIVED DECAY PRODUCTS AND ASSOCIATED MEASUREMENT METHODS |
| DIN EN ISO 8041-1:2017-10 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION - PART 1: GENERAL PURPOSE VIBRATION METERS (ISO 8041-1:2017) |
| PD CEN/TS 1948-5:2015 | Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Long-term sampling of PCDDs/PCDFs and PCBs |
| 14/30286829 DC : 0 | BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING |
| ISO 7500-1:2018 | Metallic materials — Calibration and verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Calibration and verification of the force-measuring system |
| DIN EN 14793 E : 2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| UNI CEI CEN/TR 16469 : 2014 | HYDROMETRY - MEASUREMENT OF THE RAINFALL INTENSITY (LIQUID PRECIPITATION): REQUIREMENTS, CALIBRATION METHODS AND FIELD MEASUREMENTS |
| 13/30214514 DC : 0 | BS ISO 6145-2 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES USING DYNAMIC METHODS - PART 2: VOLUMETRIC PUMPS |
| DIN EN ISO 12999-1 E : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| 16/30332792 DC : DRAFT APR 2016 | BS EN ISO 2360 - NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD |
| 15/30270495 DC | BS ISO 18310-1. Measurement and prediction of the ambient dose equivalent from patients receiving iodine 131 administration after thyroid ablation. Part 1. During the hospitalization |
| BS EN 61674:2013 | Medical electrical equipment. Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging |
| DIN EN ISO 16610-60:2016-03 | Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters - Basic concepts (ISO 16610-60:2015) |
| 13/30265648 DC : 0 | BS ISO 22514-8 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 8: MACHINE PERFORMANCE OF A MULTI-STATES PRODUCTION PROCESS |
| BS ISO 13655:2017 | Graphic technology. Spectral measurement and colorimetric computation for graphic arts images |
| 16/30333424 DC : 0 | BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL |
| 09/30118876 DC : 0 | ISO 20785-2 - DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE |
| BS ISO 21438-3:2010 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Hydrofluoric acid and particulate fluorides |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| BS ISO 16638-1 : 2015 COR 2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS |
| I.S. EN 15853:2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF MERCURY DEPOSITION |
| ISO 18115-1:2013 | Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy |
| OIML R 131 : 2001 | POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEMS FOR IONIZING RADIATION PROCESSING OF MATERIALS AND PRODUCTS |
| DIN EN ISO 16610-21:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| PD ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products. Structuring principles and reference designations Application rules for a reference designation system |
| PD CEN ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests |
| OIML R 80-1 : 2009 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| 13/30260857 DC : 0 | BS ISO 5667-14 - WATER QUALITY - SAMPLING - PART 14: GUIDANCE ON QUALITY ASSURANCE AND QUALITY CONTROL OF ENVIRONMENTAL WATER SAMPLING AND HANDLING |
| BS ISO 12789-2:2008 | Reference radiation fields. Simulated workplace neutron fields Calibration fundamentals related to the basic quantities |
| I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| BS EN ISO 25178-604:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| DD ISO/TS 16610-32:2009 | Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters |
| BS ISO 27894:2009 | Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges |
| 12/30249815 DC : 0 | BS ISO 230-2 - TEST CODE FOR MACHINE TOOLS - PART 2: DETERMINATION OF ACCURACY AND REPEATABILITY OF POSITIONING OF NUMERICALLY CONTROLLED AXES |
| BS EN ISO 80601-2-56:2017 | Medical electrical equipment Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
| 12/30236613 DC : 0 | BS EN ISO 4064-5 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS |
| BS EN 62467-1:2015 | Medical electrical equipment. Dosimetric instruments as used in brachytherapy Instruments based on well-type ionization chambers |
| ISO/ASTM 51276:2012 | Practice for use of a polymethylmethacrylate dosimetry system |
| PREN ISO 80601-2-61 : DRAFT 2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| 14/30281850 DC : 0 | BS EN ISO 2178 - NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD |
| BS ISO 27048:2011 | Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure |
| BS EN 61207-1:2010 | Expression of performance of gas analyzers General |
| BS ISO 22514-8:2014 | Statistical methods in process management. Capability and performance Machine performance of a multi-state production process |
| BS EN ISO 10360-10:2016 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) Laser trackers for measuring point-to-point distances |
| BS EN ISO 16610-71:2014 | Geometrical product specifications (GPS). Filtration Robust areal filters: Gaussian regression filters |
| 11/30243507 DC : 0 | BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| BS ISO 13168:2015 | Water quality. Simultaneous determination of tritium and carbon 14 activities. Test method using liquid scintillation counting |
| I.S. EN ISO 16610-71:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-71:2014) |
| 09/30198186 DC : 0 | BS EN ISO 13102 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL INDICATOR - DESIGN AND METROLOGICAL CHARACTERISTICS |
| 09/30196964 DC : 0 | BS EN ISO 25178-7 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS |
| XP ISO/TS 16610-28 : 2010 XP | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS |
| BS EN ISO 10360-7:2011 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs equipped with imaging probing systems |
| 12/30268424 DC : 0 | BS EN 12341 - AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| BS ISO 19970:2017 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Metering of gas as fuel on LNG carriers during cargo transfer operations |
| 09/30191459 DC : 0 | BS ISO 16063-41 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 41: CALIBRATION OF LASER VIBROMETERS |
| CEI EN 60904-4 : 2010 | PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY |
| PD ISO/TS 17518:2015 | Medical laboratories. Reagents for staining biological material. Guidance for users |
| UNE-EN ISO 18674-1:2016 | Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 1: General rules (ISO 18674-1:2015) |
| DIN ISO 3567 E : 2015 | VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011) |
| I.S. EN ISO 9696:2017 | WATER QUALITY - GROSS ALPHA ACTIVITY - TEST METHOD USING THICK SOURCE (ISO 9696:2017) |
| UNI EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| UNI EN ISO 4787 : 2011 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
| BS ISO 10790:2015 | Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
| UNE-EN 15852:2010 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| BS EN ISO 16610-21:2012 | Geometrical product specifications (GPS). Filtration Linear profile filters: Gaussian filters |
| 12/30266708 DC : 0 | BS EN ISO 4064-1 - WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| BS EN 61757-1:2012 | Fibre optic sensors Generic specification |
| DIN EN ISO 18674-1 E : 2015 | GEOTECHNICAL INVESTIGATION AND TESTING - GEOTECHNICAL MONITORING BY FIELD INSTRUMENTATION - PART 1: GENERAL RULES (ISO 18674-1:2015) |
| 10/30229864 DC : 0 | BS EN ISO 11240 - HEALTH INFORMATICS - IDENTIFICATION OF MEDICINAL PRODUCTS - DATA ELEMENTS AND STRUCTURES FOR UNIQUE IDENTIFICATION AND EXCHANGE OF UNITS OF MEASUREMENT |
| 17/30341082 DC : 0 | BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| 11/30218527 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
| CISPR TR 18-1:2010 | Radio interference characteristics of overhead power lines and high-voltage equipment - Part 1: Description of phenomena |
| 14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
| 12/30242781 DC : 0 | BS EN 61331-2 - PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - PART 2: TRANSLUCENT PROTECTIVE PLATES |
| BIS IS/ISO 15189 : 2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| DIN EN ISO 384 E : 2016 | LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS (ISO 384:2015) |
| PD CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics |
| ASTM E 170 : 2017 : REDLINE | Standard Terminology Relating to Radiation Measurements and Dosimetry |
| DIN EN ISO 80000-1:2013-08 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
| ISO 5667-20:2008 | Water quality Sampling Part 20: Guidance on the use of sampling data for decision making Compliance with thresholds and classification systems |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| ISO 27891:2015 | Aerosol particle number concentration — Calibration of condensation particle counters |
| 13/30283709 DC : 0 | BS EN ISO 384 - LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS |
| 10/30238725 DC : 0 | BS EN 60469 - TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| BS ISO 20785-2 : 2011 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE |
| CEI EN 62522 : 2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
| CEI EN 62475 : 2011 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| I.S. EN 15859:2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| DIN EN ISO 13160 E : 2016 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012) |
| PREN 14625 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| 10/30179537 DC : 0 | BS ISO 11665-1 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - AIR - PART 1: RADON-222 AND ITS SHORT-LIVED DECAY PRODUCTS IN THE ATMOSPHERIC ENVIRONMENT: THEIR ORIGINS AND MEASUREMENT METHODS |
| ECA ILAC P10 : 2013 | ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS |
| 08/30175672 DC : DRAFT SEP 2008 | BS EN 15852 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
| DIN EN 15853:2010-11 | Ambient air quality - Standard method for the determination of mercury deposition |
| BS EN ISO 16664:2017 | Gas analysis. Handling of calibration gases and gas mixtures. Guidelines |
| 15/30321070 DC : 0 | BS ISO 16063-21:2003/AMD 1 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER |
| DIN EN ISO 4064-4:2014-11 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014) |
| 10/30210750 DC : 0 | BS EN 14212 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| BS EN ISO/IEC 17020:2012 | Conformity assessment. Requirements for the operation of various types of bodies performing inspection |
| 12/30251712 DC | BS ISO/ASTM 52116. Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator |
| BS EN 16211:2015 | Ventilation for buildings. Measurement of air flows on site. Methods |
| PD CISPR/TR 16-4-1:2009 | Specification for radio disturbance and immunity measuring apparatus and methods Uncertainties, statistics and limit modelling. Uncertainties in standardized EMC tests |
| 09/30201391 DC : 0 | BS EN 55016-4-2 ED.2 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| DIN EN ISO 16610-29 E : 2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015) |
| ISO 20391-1:2018 | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods |
| 10/30200748 DC : 0 | BS ISO 13160 - WATER QUALITY - MEASUREMENT OF STRONTIUM 90 AND STRONTIUM 89 |
| BS IEC 60860:2014 | Radiation protection instrumentation. Warning equipment for criticality accidents |
| DD ISO/TS 16610-30:2009 | Geometrical product specifications (GPS). Filtration Robust profile filters. Basic concepts |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| BS EN ISO 9493:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics |
| BS EN ISO 14253-3:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
| UNE-EN ISO 16641:2016 | Measurement of radioactivity in the environment - Air - Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors (ISO 16641:2014) |
| BS ISO 6145-2:2014 | Gas analysis. Preparation of calibration gas mixtures using dynamic methods Piston pumps |
| DIN EN ISO 11135:2014-10 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| BS EN ISO 6789-1:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance |
| BS EN ISO 4787:2011 | Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use |
| 13/30264462 DC : 0 | BS EN ISO 6508-1 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD |
| BS EN ISO 25178-605:2014 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments |
| 15/30312454 DC : 0 | BS EN ISO 80601-2-56 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT |
| 16/30295054 DC : DRAFT APR 2016 | BS ISO 12963 - GAS ANALYSIS - COMPARISON METHODS FOR THE DETERMINATION OF THE COMPOSITION OF GAS MIXTURES BASED ON ONE- AND TWO-POINT CALIBRATION |
| 13/30284241 DC : 0 | BS EN 13201-4 - ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE |
| BS IEC 61577-4 : 2009 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 4: EQUIPMENT FOR THE PRODUCTION OF REFERENCE ATMOSPHERES CONTAINING RADON ISOTOPES AND THEIR DECAY PRODUCTS (STAR) |
| PD CEN/TR 16269:2011 | Ambient air. Guide for the measurement of anions and cations in PM2,5 |
| 09/30196542 DC : 0 | BS ISO 9698 - WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD |
| 14/30274825 DC : 0 | BS ISO 7503-2 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND E EVALUATION OF SURFACE CONTAMINATION - PART 2: TEST METHOD USING WIPE-TEST SAMPLES |
| BS EN ISO 3611:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS ISO 21438-1:2007 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) |
| DIN EN ISO 25178-701:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| BS ISO 9697 : 2015 | WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE |
| 12/30273325 DC : 0 | BS ISO 16610-30 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 30: ROBUST PROFILE FILTERS: BASIC CONCEPTS |
| 15/30326444 DC : 0 | BS EN 60942 - ELECTROACOUSTICS - SOUND CALIBRATORS |
| 15/30331502 DC : DRAFT DEC 2015 | BS EN ISO 9696 - WATER QUALITY - MEASUREMENT OF GROSS ALPHA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD |
| 12/30217461 DC : 0 | BS ISO 16087 - IMPLANTS FOR SURGERY - ROENTGEN STEREOPHOTOGRAMMETRY FOR ASSESSMENT OF MICROMOTION OF ORTHOPAEDIC IMPLANTS |
| BS EN 61672-3:2013 | Electroacoustics. Sound level meters Periodic tests |
| I.S. EN 61757-2-2:2017 | FIBRE OPTIC SENSORS - PART 2-2: TEMPERATURE MEASUREMENT - DISTRIBUTED SENSING |
| ISO 2715:2017 | Liquid hydrocarbons — Volumetric measurement by turbine flowmeter |
| ISO 5129:2001 | Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| BS EN 61788-13:2012 | Superconductivity AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| PREN 12405-3 : DRAFT 2013 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| UNE-ISO 7504:2016 | Gas analysis. Vocabulary |
| BS ISO 4094:2017 | Paper, board and pulps. General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 |
| BIS IS/ISO 80000-1 : 2009 | QUANTITIES AND UNITS - PART 1: GENERAL |
| ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
| BS EN 61788-12:2013 | Superconductivity Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires |
| OIML R 81 : 1998 | DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS |
| OIML R 85-1 & 2 : 2008 | AUTOMATIC LEVEL GAUGES FOR MEASURING THE LEVEL OF LIQUID IN STATIONARY STORAGE TANKS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROL AND TESTS |
| CEI EN 61788-5 : 2014 | SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES |
| 08/30169333 DC : DRAFT MAR 2008 | BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNE-EN ISO 25178-602:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| OIML R 127 : 1999 | RADIOCHROMIC FILM DOSIMETRY SYSTEM FOR IONIZING RADIATION PROCESSING OF MATERIALS AND PRODUCTS |
| I.S. EN ISO 80000-1:2013 | QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011) |
| I.S. EN ISO 384:2015 | LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS (ISO 384:2015) |
| DIN EN 12405-3:2016-04 | Gas meters - Conversion devices - Part 3: Flow computer |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| DIN EN 12405-2:2012-10 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| CSA Z9919 : 2007 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| DIN 58964 E : 2015 | QUALITY ASSURANCE OF POCT RESULTS - ASSESSMENT CRITERIA FOR COMPARISON MEASUREMENT AND IMPLEMENTATION |
| ISO 12106:2017 | Metallic materials — Fatigue testing — Axial-strain-controlled method |
| OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| I.S. EN 55016-2-3:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
| EN ISO 20785-2:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011) |
| I.S. EN 62522:2014 | CALIBRATION OF TUNEABLE LASER SOURCES |
| I.S. EN 1911:2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF GASEOUS CHLORIDES EXPRESSED AS HCL - STANDARD REFERENCE METHOD |
| ISO/TS 19159-2:2016 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 2: Lidar |
| ISO 15378:2017 | Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| 16/30208484 DC : 0 | BS EN 15654-2 - RAILWAY APPLICATIONS - MEASUREMENT OF VERTICAL FORCES ON WHEELS AND WHEELSETS - PART 2: TEST IN WORKSHOP FOR NEW, MODIFIED AND MAINTAINED VEHICLES |
| I.S. EN 61757-1:2012 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012 (EQV)) |
| I.S. EN ISO 12999-1:2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION (ISO 12999-1:2014) |
| I.S. EN ISO 4064-5:2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014) |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| I.S. EN ISO 6789-1:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017) |
| PD IEC/TR 61282-14:2016 | Fibre optic communication system design guides Determination of the uncertainties of attenuation measurements in fibre plants |
| I.S. EN ISO 9698:2015 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010) |
| BS EN 61672-2 : 2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN 16479:2014 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| ANSI/AAMI/ISO 11135:2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS EN ISO 29661:2017 | Reference radiation fields for radiation protection. Definitions and fundamental concepts |
| ISO 6789-2:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 2: Requirements for calibration and determination of measurement uncertainty |
| I.S. EN IEC 60942:2018 | ELECTROACOUSTICS - SOUND CALIBRATORS |
| ISO 230-1:2012 | Test code for machine tools — Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| API MPM CH13.3 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 13.3: MEASUREMENT UNCERTAINTY |
| ISO/TS 19159-3:2018 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 3: SAR/InSAR |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| ISO/TS 16610-32:2009 | Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters |
| BS EN 12405-1 : 2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN ISO 11704:2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010) |
| AAMI TIR58 : 2014 | WATER TESTING METHODOLOGIES |
| ISO 6145-2:2014 | Gas analysis Preparation of calibration gas mixtures using dynamic methods Part 2: Piston pumps |
| UNE-EN ISO 14253-2:2012 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 14253-2:2011) |
| ISO 21439:2009 | Clinical dosimetry Beta radiation sources for brachytherapy |
| OIML R 75-1 : 2002 | HEAT METERS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 61672-2 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN ISO 2360:2017 | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| UNI CEI EN ISO 4064-5 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS |
| UNI EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| UNI CEI EN ISO 4064-1 : 2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| UNI CEI ISO/IEC 17007 : 2010 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| DIN EN ISO 9698 E : 2015 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD (ISO 9698:2010) |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| DIN ISO 16063-21:2016-08 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 21: VIBRATION CALIBRATION BY COMPARISON TO A REFERENCE TRANSDUCER (ISO 16063-21:2003 + COR. 1:2009 + AMD.1:2016) |
| BS EN 62209-2:2010 | Human exposure to radio frequency fields from hand-held and bodymounted wireless communication devices. Human models, instrumentation, and procedures Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) |
| ISO/IEC/IEEE 15939:2017 | Systems and software engineering — Measurement process |
| BS EN ISO 20785-2:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft Characterization of instrument response |
| CEI EN 61788-16 : 2013 | SUPERCONDUCTIVITY - PART 16: ELECTRONIC CHARACTERISTIC MEASUREMENTS - POWER DEPENDENT SURFACE RESISTANCE OF SUPERCONDUCTORS AT MICROWAVE FREQUENCIES |
| OIML D 29 : 2008 | GUIDE FOR THE APPLICATION OF ISO/IEC GUIDE 65 TO ASSESSMENT OF MEASURING INSTRUMENT CERTIFICATION BODIES IN LEGAL METROLOGY |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| ISO/TS 28037:2010 | Determination and use of straight-line calibration functions |
| UNI EN ISO 25178-6 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE |
| CEI EN 61757-1-1 : 1ED 2017 | FIBRE OPTIC SENSORS - PART 1-1: STRAIN MEASUREMENT - STRAIN SENSORS BASED ON FIBRE BRAGG GRATINGS |
| CSA CISPR 16-1-2 : 2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-2: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - COUPLING DEVICES FOR CONDUCTED DISTURBANCE MEASUREMENTS |
| DIN EN ISO 9698:2015-12 | Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010) |
| OIML R 59-1 : 2016 | MOISTURE METERS FOR CEREAL GRAINS AND OILSEEDS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| S.R. CWA 17102:2017 | WATER ANALYSIS - VIRUS SENSOR SYSTEM - MONITORING ROTAVIRUS, NOROVIRUS AND HEPATITIS A VIRUS IN VARIOUS TYPES OF WATER INTENDED FOR HUMAN USE |
| BS EN 13032-4:2015 | Light and lighting. Measurement and presentation of photometric data of lamps and luminaires LED lamps, modules and luminaires |
| ISO 13164-4:2015 | Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting |
| ASTM E 1965 : 1998 : R2016 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| IEC 61757-1-1:2016 | Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings |
| UNE-EN 16479:2014 | Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water |
| CEI EN 62467-1 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS AS USED IN BRACHYTHERAPY - PART 1: INSTRUMENTS BASED ON WELL-TYPE IONIZATION CHAMBERS |
| OVE/ONORM EN 55016-4-2 : 2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY (CISPR 16-4-2:2011 + A1:2014) |
| ASTM E 2194 : 2014 : R2017 | Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| UNI EN ISO 10360-7 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| ASTM D 6349 : 2013 : REDLINE | Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| I.S. EN ISO 10360-9:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
| I.S. EN ISO 25178-1:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE (ISO 25178-1:2016) |
| ISO 27894:2009 | Vacuum technology Vacuum gauges Specifications for hot cathode ionization gauges |
| IEC 61786-2:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings - Part 2: Basic standard for measurements |
| ANSI/ASA S1.4 PART 2 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO/TS 17822-1:2014 | In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions |
| I.S. EN ISO 19156:2013 | GEOGRAPHIC INFORMATION - OBSERVATIONS AND MEASUREMENTS (ISO 19156:2011) |
| NF EN ISO 10360-5 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| ASTM D 6568 : 2000 : R2006 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| I.S. EN 61674:2013 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMICONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING (IEC 61674:2012 (EQV)) |
| ASTM C 1128 : 2018 : REDLINE | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
| ISO/TS 23165:2006 | Geometrical product specifications (GPS) — Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty |
| I.S. EN ISO 4287:1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| DIN EN 1060-3:2010-03 | NON-INVASIVE SPHYGMOMANOMETERS - PART 3: SUPPLEMENTARY REQUIREMENTS FOR ELECTRO-MECHANICAL BLOOD PRESSURE MEASURING SYSTEMS |
| DIN EN 14212 E : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| DIN EN ISO 9906 E : 2013 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| DIN EN ISO 6974-2 E : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
| BS EN 12341:2014 | Ambient air. Standard gravimetric measurement method for the determination of the PM<sub>10</sub> or PM<sub>2,5</sub> mass concentration of suspended particulate matter |
| BS EN ISO 10882-1:2011 | Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator\'s breathing zone Sampling of airborne particles |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| BS EN 12211:2016 | Windows and doors. Resistance to wind load. Test method |
| BS EN ISO 3274:1998 | Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instruments |
| 11/30239716 DC : 0 | BS EN 16242 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| BS ISO 26142:2010 | Hydrogen detection apparatus. Stationary applications |
| UNE-EN 61331-2:2015 | Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates |
| UNE-EN ISO 6976:2017 | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) |
| BS EN ISO 12085 : 1998 | GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| BS EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
| BS EN ISO 6976:2005 | Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition |
| UNE-EN ISO 21572:2013 | Foodstuffs - Molecular biomarker analysis - Protein-based methods (ISO 21572:2013) |
| BS EN ISO 2813:2014 | Paints and varnishes. Determination of gloss value at 20 degrees, 60 degrees and 85 degrees |
| BS EN ISO 17994:2014 | Water quality. Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods |
| ISO 4064-4:2014 | Water meters for cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1 |
| CEN/TS 16429:2013 | Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique |
| I.S. EN ISO 15189:2012 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| CEN/TS 1948-5:2015 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs |
| CISPR TR 18-3:2017 RLV | Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise |
| EN 12405-2:2012 | Gas meters - Conversion devices - Part 2: Energy conversion |
| EN 61788-16:2013 | Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies |
| CEN ISO/TS 16491 : 2012 | GUIDELINES FOR THE EVALUATION OF UNCERTAINTY OF MEASUREMENT IN AIR CONDITIONER AND HEAT PUMP COOLING AND HEATING CAPACITY TESTS (ISO/TS 16491:2012) |
| BS 8888:2011 | Technical product documentation and specification |
| EN 62321-1:2013 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview |
| EN 61788-8:2010 | Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method |
| EN 1060-3:1997+A2:2009 | Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| DIN ISO 5129:2014-11 | Acoustics - Measurement of sound pressure levels in the interior of aircraft during flight (ISO 5129:2001 + Amd.1:2013) |
| EN 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| EN 62585 : 2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012) |
| EN 61788-18:2013 | Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| CEN/TS 14793:2005 | Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
| DIN EN ISO 139:2011-10 | Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005 + Amd.1:2011) |
| EN ISO 12179:2000/AC:2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| EN ISO 14253-3:2011 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| DIN EN 14789:2017-05 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| EN 1027:2016 | WINDOWS AND DOORS - WATER TIGHTNESS - TEST METHOD |
| EN 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
| EN ISO 13102:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| EN 61577-4:2014 | Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) |
| EN 12211:2016 | Windows and doors - Resistance to wind load - Test method |
| EN 13032-4:2015 | Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 4: LED lamps, modules and luminaires |
| EN 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers |
| EN 62467-1:2015 | Medical electrical equipment - Dosimetric instruments as used in brachytherapy - Part 1: Instruments based on well-type ionization chambers |
| EN 61788-5:2013 | SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES |
| EN 13352:2012 | Specification for the performance of automatic tank contents gauges |
| EN 80000-14:2009 | Quantities and units - Part 14: Telebiometrics related to human physiology |
| EN 55016-2-2:2011 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| EN 62419:2009 | Control technology - Rules for the designation of measuring instruments |
| EN 12341:2014 | Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| BS 7882:2017 | Method for calibration and classification of torque measuring devices |
| EN 62475 : 2010 | HIGH-CURRENT TEST TECHNIQUES - DEFINITIONS AND REQUIREMENTS FOR TEST CURRENTS AND MEASURING SYSTEMS |
| EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| ONORM EN ISO 15189 : 2014 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15) |
| ASME B89.3.7 : 2013 | GRANITE SURFACE PLATES |
| VDI/VDE 2624 Blatt 4.1:2013-04 | Measurement of mechanical quantities - Non-rotating static calibration of the measure torque on performance test stations |
| ASME B89.1.14 : 2018 | CALIPERS |
| VDI/VDE 2617 Blatt 6.3:2008-12 | Accuracy of coordinate measuring machines - Characteristics and their checking - Coordinate measuring machines with multiple probing systems |
| VDI/VDE 2660 Blatt 1:2010-07 | Experimental stress analysis - Optical strain sensor based on fibre Bragg grating - Fundamentals, characteristics and sensor testing |
| ONORM EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| 10/30207290 DC : 0 | BS EN 62129-2 - CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| 17/30337974 DC : 0 | BS EN ISO 50001 - ENERGY MANAGEMENT SYSTEMS - REQUIREMENTS WITH GUIDANCE FOR USE |
| PD CEN/TS 16450:2013 | Ambient air. Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| DIN EN 13032-4:2015-08 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| DIN EN 15852:2010-11 | Ambient air quality - Standard method for the determination of total gaseous mercury |
| 10/30174936 DC : 0 | BS ISO 11352 - WATER QUALITY - DETERMINATION OF MEASUREMENT UNCERTAINTY BASED ON VALIDATION DATA |
| CEI UNI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| DIN EN 15852 E : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| 13/30264511 DC : 0 | BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING |
| UNI 11314 : 2009 | METALLIC MATERIALS - CALIBRATION OF STATIC TORQUE MEASURING DEVICES |
| 14/30295890 DC : 0 | BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| 14/30275429 DC : 0 | BS ISO 16638-1 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: URANIUM |
| BS EN 61788-19:2014 | Superconductivity Mechanical properties measurement. Room temperature tensile test of reacted Nb<sub>3</sub>Sn composite superconductors |
| BS EN ISO 14253-2:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| 13/30273328 DC : 0 | BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS |
| BS EN ISO 20857:2013 | Sterilization of health care products. Dry heat. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| ISO/PAS 12868:2009 | Geometrical product specification (GPS) Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems |
| BS EN ISO 16610-61:2015 | Geometrical product specification (GPS). Filtration Linear areal filters. Gaussian filters |
| 17/30345849 DC : 0 | BS EN 13144 - METALLIC AND OTHER INORGANIC COATINGS - METHOD FOR QUANTITATIVE MEASUREMENT OF ADHESION BY TENSILE TEST |
| 10/30214897 DC : 0 | BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES |
| BS ISO/IEC 25040:2011 | Systems and software engineering. Systems and software quality requirements and evaluation (SQuaRE). Evaluation process |
| UNE-EN ISO 10360-7:2012 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
| DIN EN ISO 4064-5:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014) |
| I.S. EN ISO 11562:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE : PROFILE METHOD - METROLOGICAL CHARACTERISTICS OF PHASE CORRECT FILTERS |
| BS EN ISO 13225:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics |
| UNE-EN ISO 13385-2:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| UNE-EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| I.S. EN ISO 10360-8:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 8: CMMS WITH OPTICAL DISTANCE SENSORS (ISO 10360-8:2013) |
| DIN EN ISO 16610-20:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015) |
| BS ISO 12749-4:2015 | Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing |
| 15/30322609 DC : 0 | BS ISO 13655 - GRAPHIC TECHNOLOGY - SPECTRAL MEASUREMENT AND COLORIMETRIC COMPUTATION FOR GRAPHIC ARTS IMAGES |
| 13/30278455 DC : DRAFT JAN 2014 | BS ISO 16637 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR STAFF EXPOSED TO MEDICAL RADIONUCLIDES AS UNSEALED SOURCES |
| OIML D 21 : 1990 | SECONDARY STANDARD DOSIMETRY LABORATORIES FOR THE CALIBRATION OF DOSIMETERS USED IN RADIOTHERAPY |
| ISO/TR 79:2015 | Reference materials - Examples of reference materials for qualitative properties |
| 15/30318290 DC : 0 | BS EN ISO 17662 - WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES |
| 09/30208595 DC : 0 | BS EN 61672-3 ED.2 - ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| BS ISO/CIE 19476:2014 | Characterization of the performance of illuminance meters and luminance meters |
| 15/30299406 DC : 0 | BS EN ISO 16610-28 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS |
| PREN 12405-1 : DRAFT 2017 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| 15/30295114 DC : 0 | BS EN ISO 25178-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS |
| UNI CEI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| BS ISO 3310-1:2016 | Test sieves. Technical requirements and testing Test sieves of metal wire cloth |
| BS ISO 26824:2013 | Particle characterization of particulate systems. Vocabulary |
| 15/30295576 DC : 0 | BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS |
| BS EN ISO 16638-1:2017 | Radiological protection. Monitoring and internal dosimetry for specific materials Inhalation of uranium compounds |
| 17/30356677 DC : 0 | BS ISO/ASTM 51538 - PRACTICE FOR USE OF THE ETHANOL-CHLOROBENZENE DOSIMETRY SYSTEM |
| BS ISO/IEC 15944-9:2015 | Information technology. Business Operational View Business transaction traceability framework for commitment exchange |
| BS EN ISO 16948:2015 | Solid biofuels. Determination of total content of carbon, hydrogen and nitrogen |
| NF EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| 16/30344112 DC : 0 | BS ISO/ASTM 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY |
| CEI EN 60731 : 2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| OIML R 115 : 1995 | CLINICAL ELECTRICAL THERMOMETERS WITH MAXIMUM DEVICE |
| 09/30207691 DC : 0 | BS ISO/IEC 19761 - SOFTWARE ENGINEERING - COSMIC - A FUNCTIONAL SIZE MEASUREMENT METHOD |
| PREN 14791 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| XP ISO/TS 16610-31 : 2010 XP | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS |
| OIML R 128 : 2000 | ERGOMETERS FOR FOOT CRANK WORK |
| OIML R 50-1 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| DIN ISO 18115-1 E : 2017 | SURFACE CHEMICAL ANALYSIS - VOCABULARY - PART 1: GENERAL TERMS AND TERMS USED IN SPECTROSCOPY (ISO 18115-1:2013) |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| PD ISO/TS 17822-1:2014 | <i>In</i> <i>vitro</i> diagnostic test systems. Qualitative nucleic acid-based <i>in</i> <i>vitro</i> examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions |
| BS EN 16242:2012 | Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| 12/30258004 DC : 0 | BS ISO 17091 - WORKPLACE AIR - DETERMINATION OF LITHIUM HYDROXIDE, SODIUM HYDROXIDE, POTASSIUM HYDROXIDE AND CALCIUM DIHYDROXIDE - METHOD BY MEASUREMENT OF CORRESPONDING CATIONS BY SUPPRESSED ION CHROMATOGRAPHY |
| 15/30299409 DC : 0 | BS EN ISO 16610-31 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS |
| 12/30229691 DC : 0 | BS EN ISO 2813 - PAINTS AND VARNISHES - DETERMINATION OF SPECULAR GLOSS OF NON-METALLIC PAINT FILMS AT 20 DEGREES, 60 DEGREES AND 85 DEGREES |
| DIN EN 15859 E : 2010 | AIR QUALITY - CERTIFICATION OF AUTOMATED DUST ARRESTMENT PLANT MONITORS FOR USE ON STATIONARY SOURCES - PERFORMANCE CRITERIA AND TEST PROCEDURES |
| BS ISO 8196-3:2009 | Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Protocol for the evaluation and validation of alternative quantitative methods of milk analysis |
| 12/30258952 DC : 0 | BS ISO 16610-20 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS |
| BS ISO 20785-1 : 2012 | DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 1: CONCEPTUAL BASIS FOR MEASUREMENTS |
| BS EN ISO 16610-20:2015 | Geometrical product specifications (GPS). Filtration Linear profile filters: Basic concepts |
| 13/30287977 DC : 0 | BS EN ISO 1683 - ACOUSTICS - PREFERRED REFERENCE VALUES FOR ACOUSTICAL AND VIBRATORY LEVELS |
| BS EN 62419:2009 | Control technology. Rules for the designation of measuring instruments |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| 14/30298720 DC : 0 | BS ISO/IEC 15944-9 - INFORMATION TECHNOLOGY - BUSINESS OPERATIONAL VIEW - PART 9: BUSINESS TRANSACTION TRACEABILITY FRAMEWORK FOR COMMITMENT EXCHANGE |
| 10/30229245 DC : 0 | BS EN 62321-2 ED 1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTRO TECHNICAL PRODUCTS - PART 2: DISASSEMBLY, DISJOINTMENT AND MECHANICAL SAMPLE PREPARATION |
| 16/30334592 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| OIML D 27 : 2001 | INITIAL VERIFICATION OF MEASURING INSTRUMENTS UTILIZING THE MANUFACTURER'S QUALITY MANAGEMENT SYSTEM |
| ISO 11843-1:1997 | Capability of detection Part 1: Terms and definitions |
| 10/30203803 DC : 0 | BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| BS EN ISO 19156:2013 | Geographic information. Observations and measurements |
| DIN ISO 16063-16 E : 2015 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH'S GRAVITATION (ISO 16063-16:2014) |
| DIN ISO 3567:2015-05 | VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011) |
| DIN EN ISO 10360-9:2014-04 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS (ISO 10360-9:2013) |
| I.S. EN ISO 13102:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| DIN EN ISO 1683:2015-09 | ACOUSTICS - PREFERRED REFERENCE VALUES FOR ACOUSTICAL AND VIBRATORY LEVELS (ISO 1683:2015) |
| OIML R 100 : 1991 | ATOMIC ABSORPTION SPECTROMETERS FOR MEASURING METAL POLLUTANTS IN WATER |
| PD ISO/TR 13014:2012 | Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| CEI EN 61788-12 : 2014 | SUPERCONDUCTIVITY - PART 12: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO NON-COPPER VOLUME RATIO OF NB[3]SN COMPOSITE SUPERCONDUCTING WIRES |
| 15/30315820 DC : DRAFT JAN 2015 | BS EN ISO 1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| 10/30198898 DC : 0 | BS ISO 19156 - GEOGRAPHIC INFORMATION - OBSERVATIONS AND MEASUREMENTS |
| BS ISO 18158:2016 | Workplace air. Terminology |
| DIN EN ISO 13385-1:2011-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| UNI EN 16457 : 2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| BS ISO 19361:2017 | Measurement of radioactivity. Determination of beta emitters activities. Test method using liquid scintillation counting |
| BS ISO 27893:2011 | Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge |
| BS EN 15859:2010 | Air quality. Certification of automated dust arrestment plant monitors for use on stationary sources. Performance criteria and test procedures |
| BS EN 61577-4:2014 | Radiation protection instrumentation. Radon and radon decay product measuring instruments Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) |
| 11/30229715 DC : 0 | BS EN ISO/IEC 17020 - CONFORMITY ASSESSMENT - GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| 12/30236292 DC : 0 | BS EN ISO 17994 - WATER QUALITY - REQUIREMENTS FOR THE COMPARISON OF THE RELATIVE RECOVERY OF MICROORGANISMS BY TWO QUANTITATIVE METHODS |
| NF EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
| DIN EN ISO 12999-1:2014-09 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| BS EN ISO 12836:2015 | Dentistry. Digitizing devices for CAD/CAM systems for indirect dental restorations. Test methods for assessing accuracy |
| BS EN 60794-1-20:2014 | Optical fibre cables Generic specification. Basic optical cable test procedures. General and definitions |
| 08/30177580 DC : DRAFT FEB 2008 | BS EN 61260-1 - ELECTRO ACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 1: SPECIFICATIONS |
| BS EN ISO 16610-30:2017 | Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts |
| BS EN ISO 16610-29:2015 | Geometrical product specifications (GPS). Filtration Linear profile filters: Spline wavelets |
| 09/30175027 DC : 0 | BS ISO 14934-1 - FIRE TESTS - CALIBRATION AND USE OF HEAT FLUX METERS - PART 1: GENERAL PRINCIPLES |
| BS EN 15852:2010 | Ambient air quality. Standard method for the determination of total gaseous mercury |
| DIN EN ISO 10360-10 E : 2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES (ISO 10360-10:2016) |
| BS EN 61745:2017 | End-face image analysis procedure for the calibration of optical fibre geometry test sets Part 1: Introduction and roadmap for standardization |
| 11/30244091 DC : 0 | BS EN ISO 11135 - STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 4064-5 E : 2017 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 5: INSTALLATION REQUIREMENTS (ISO 4064-5:2014) |
| ISO 13059:2011 | Round timber — Requirements for the measurement of dimensions and methods for the determination of volume |
| BS EN 55016-2-2:2004 | Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| UNI CEN/TR 10317 : 2009 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
| PREN 13144 : DRAFT 2017 | METALLIC AND OTHER INORGANIC COATINGS - METHOD FOR QUANTITATIVE MEASUREMENT OF ADHESION BY TENSILE TEST |
| BS EN 55016-2-1:2014 | Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity. Conducted disturbance measurements |
| BS ISO 14470:2011 | Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| 12/30234144 DC : 0 | BS EN ISO 10360-10 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMS) - PART 10: LASER TRACKERS FOR MEASURING POINT-TO-POINT DISTANCES |
| BS EN 61788-17:2013 | Superconductivity Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| DIN EN 16440-1:2015-05 | TESTING METHODOLOGIES OF REFRIGERATING DEVICES FOR INSULATED MEANS OF TRANSPORT - PART 1: MECHANICAL COOLING DEVICE WITH FORCED AIR CIRCULATION EVAPORATOR WITH OR WITHOUT HEATING DEVICE |
| DIN EN ISO 384:2016-05 | LABORATORY GLASS AND PLASTICS WARE - PRINCIPLES OF DESIGN AND CONSTRUCTION OF VOLUMETRIC INSTRUMENTS (ISO 384:2015) |
| CAN/CSA-ISO/IEC 19761:12 (R2016) | Software engineering - COSMIC: a functional size measurement method (Adopted ISO/IEC 19761:2011, second edition, 2011-03-15) |
| BS ISO 2715:2017 | Liquid hydrocarbons. Volumetric measurement by turbine flowmeter Volumetric measurement by turbine meter systems |
| BS ISO 14934-2:2013 | Fire tests. Calibration and use of heat flux meters Primary calibration methods |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS EN 62129-2:2011 | Calibration of wavelength/optical frequency measurement instruments Michelson interferometer single wavelength meters |
| DIN EN ISO 25178-605:2014-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
| DD CEN ISO/TS 22117:2010 | Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| PD CISPR/TR 18-3:2017 | Radio interference characteristics of overhead power lines and high-voltage equipment Part 3: Code of practice for minimizing the generation of radio noise |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 12/30231423 DC : 0 | BS ISO 13163-1 - WATER QUALITY - LEAD 210 - PART 1: LIQUID SCINTILLATION COUNTING METHOD |
| DIN EN ISO 4064-1:2016-09 (Draft) | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS (ISO 4064-1:2014) |
| BS EN 61757-1-1:2017 | Fibre optic sensors Strain measurement. Strain sensors based on fibre Bragg gratings |
| DIN EN ISO 6789-1 E : 2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 1: REQUIREMENTS AND METHODS FOR DESIGN CONFORMANCE TESTING AND QUALITY CONFORMANCE TESTING: MINIMUM REQUIREMENTS FOR DECLARATION OF CONFORMANCE (ISO 6789-1:2017) |
| UNI EN ISO 25178-701 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| 14/30262728 DC : 0 | BS ISO 9000 - QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| PD CLC/TR 50083-2-1:2014 | Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility measurements |
| PD ISO/TS 17865:2016 | Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems |
| PD ISO GUIDE 35:2017 | Reference materials. Guidance for characterization and assessment of homogeneity and stability |
| 08/30193653 DC : 0 | BS ISO 17123-1 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY |
| BS ISO 29473:2010 | Fire tests. Uncertainty of measurements in fire tests |
| DIN EN ISO 12836:2015-11 | DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY (ISO 12836:2015) |
| OIML R 125 : 1998 | MEASURING SYSTEMS FOR THE MASS OF LIQUIDS IN TANKS |
| OIML D 8 : 2004 | MEASUREMENT STANDARDS. CHOICE, RECOGNITION, USE, CONSERVATION AND DOCUMENTATION |
| BS EN 61757-2-2:2017 | Fibre optic sensors Temperature measurement. Distributed sensing |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| BS EN ISO 11771:2010 | Air quality. Determination of time-averaged mass emissions and emission factors. General approach |
| BS EN 61260-2 : 2016 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| DD CEN/TS 14793:2005 | Stationary source emission. Intralaboratory validation procedure for an alternative method compared to a reference method |
| BS EN 60544-1:2013 | Electrical insulating materials. Determination of the effects of ionizing radiation Radiation interaction and dosimetry |
| 11/30235530 DC : 0 | BS ISO D 51276 - PRACTICE FOR USE OF A POLYMETHYLMETHACRYLATE DOSIMETRY SYSTEM |
| BS EN 61377:1997 | Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control |
| 18/30334086 DC : DRAFT APR 2018 | BS EN ISO 20896 - DENTISTRY - DIGITAL IMPRESSION DEVICES - METHODS FOR ASSESSING ACCURACY |
| CSA ISO/IEC 19761 : 2012 | SOFTWARE ENGINEERING - COSMIC: A FUNCTIONAL SIZE MEASUREMENT METHOD |
| 16/30344343 DC : 0 | BS ISO/ASTM 51205 - PRACTICE FOR USE OF A CERIC-CEROUS SULFATE DOSIMETRY SYSTEM |
| 17/30349154 DC : 0 | BS ISO 20146 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR CAPACITANCE DIAPHRAGM GAUGE |
| BS ISO 5667-20:2008 | Water quality. Sampling Guidance on the use of sampling data for decision making. Compliance with thresholds and classification systems |
| PD ISO/TS 19159-2:2016 | Geographic information. Calibration and validation of remote sensing imagery sensors and data Lidar |
| NF ISO 11929 : 2010 | DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE CONFIDENCE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION |
| 17/30341085 DC : 0 | BS EN ISO 13385-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: DESIGN AND METROLOGICAL CHARACTERISTICS OF CALLIPERS |
| I.S. EN ISO 80601-2-56:2017 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-56: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CLINICAL THERMOMETERS FOR BODY TEMPERATURE MEASUREMENT (ISO 80601-2-56:2017) |
| CEI EN 60469 : 2014 | TRANSITIONS, PULSES AND RELATED WAVE FORMS - TERMS, DEFINITIONS AND ALGORITHMS |
| BS EN ISO 25178-701:2010 | Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments |
| 09/30181956 DC : DRAFT MAY 2009 | BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| CEI EN 61526 : 2013 | RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS |
| S.R. CEN ISO TS 22117:2010 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| PREN 13201-4 : DRAFT 2013 | ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE |
| PREN 14790 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| PREN 14211 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| CEI EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| ASTM E 2194 : 2014 | Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| DIN EN ISO 204 E : 2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| DIN ISO 12789-2:2013-01 | REFERENCE RADIATION FIELDS - SIMULATED WORKPLACE NEUTRON FIELDS - PART 2: CALIBRATION FUNDAMENTALS RELATED TO THE BASIC QUANTITIES (ISO 12789-2:2008) |
| ISO 7504:2015 | Gas analysis Vocabulary |
| BS EN ISO 9698:2015 | Water quality. Determination of tritium activity concentration. Liquid scintillation counting method |
| CEI EN 62129-2 : 2012 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| UNE-EN 12405-3:2016 | Gas meters - Conversion devices - Part 3: Flow computer |
| ISO 14253-2:2011 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| DIN EN ISO 16664:2016-07 (Draft) | GAS ANALYSIS - HANDLING OF CALIBRATION GASES AND GAS MIXTURES - GUIDELINES (ISO 16664:2017) |
| ISO/ASTM 52628:2013 | Standard practice for dosimetry in radiation processing |
| IEC 60846-1:2009 | Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors |
| UNI EN ISO 8598-1 : 2014 | OPTICS AND OPTICAL INSTRUMENTS - FOCIMETERS - PART 1: GENERAL PURPOSE INSTRUMENTS USED FOR MEASURING SPECTACLE LENSES |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| ISO/TS 16610-28:2010 | Geometrical product specifications (GPS) Filtration Part 28: Profile filters: End effects |
| ISO 25178-71:2017 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 71: Software measurement standards |
| UNI EN 15964 : 2011 | BREATH ALCOHOL TEST DEVICES OTHER THAN SINGLE USE DEVICES - REQUIREMENTS AND TEST METHODS |
| IEC 60942 REDLINE : 4ED 2017 | ELECTROACOUSTICS - SOUND CALIBRATORS |
| AAMI ISO 11607-1 : 2006 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS, AND PACKAGING SYSTEMS |
| I.S. EN ISO 204:2009 | METALLIC MATERIALS - UNIAXIAL CREEP TESTING IN TENSION - METHOD OF TEST |
| ISO 9697:2015 | Water quality Gross beta activity in non-saline water Test method using thick source |
| ISO 2714:2017 | Liquid hydrocarbons — Volumetric measurement by displacement meter |
| UNE 199072-2:2017 | Road traffic management equipment. Air monitoring stations on roads. Part 2: Application protocol |
| ISO 11616:2017 | Health informatics — Identification of medicinal products — Data elements and structures for unique identification and exchange of regulated pharmaceutical product information |
| I.S. EN 55016-4-2:2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| BIS IS 14976 : 2012 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
| I.S. EN 62585:2012 | ELECTROACOUSTICS - METHODS TO DETERMINE CORRECTIONS TO OBTAIN THE FREE-FIELD RESPONSE OF A SOUND LEVEL METER (IEC 62585:2012 (EQV)) |
| I.S. EN ISO 18674-1:2015 | GEOTECHNICAL INVESTIGATION AND TESTING - GEOTECHNICAL MONITORING BY FIELD INSTRUMENTATION - PART 1: GENERAL RULES (ISO 18674-1:2015) |
| I.S. EN ISO 16610-29:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS (ISO 16610-29:2015) |
| I.S. EN ISO 16140-1:2016 | MICROBIOLOGY OF THE FOOD CHAIN - METHOD VALIDATION - PART 1: VOCABULARY (ISO 16140-1:2016) |
| ISO 13655:2017 | Graphic technology — Spectral measurement and colorimetric computation for graphic arts images |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 14934-1:2010 | Fire tests Calibration and use of heat flux meters Part 1: General principles |
| UNI EN ISO 80601-2-61 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| I.S. EN 61577-4:2014 | RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 4: EQUIPMENT FOR THE PRODUCTION OF REFERENCE ATMOSPHERES CONTAINING RADON ISOTOPES AND THEIR DECAY PRODUCTS (STAR) |
| ISO/IEC 19514:2017 | Information technology — Object management group systems modeling language (OMG SysML) |
| EN ISO 13160:2015 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
| I.S. EN IEC 62343-5-2:2018 | DYNAMIC MODULES - PART 5-2: TEST METHODS - 1XN FIXED-GRID WSS - DYNAMIC CROSSTALK MEASUREMENT |
| I.S. EN 62321-1:2013 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW (IEC 62321-1:2013 (EQV)) |
| NF EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 13385-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN 55016-1-5:2015 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus. Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
| I.S. EN ISO 16638-1:2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS (ISO 16638-1:2015) |
| I.S. EN 16457:2014 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| I.S. EN ISO 17034:2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS (ISO 17034:2016) |
| UNE-EN 55016-4-2:2012 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| UNE-EN ISO 5667-14:2017 | Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014) |
| ISO/TS 16610-30:2009 | Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts |
| ISO 11929:2010 | Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation Fundamentals and application |
| UNI CEN ISO/TS 22117 : 2011 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - SPECIFIC REQUIREMENTS AND GUIDANCE FOR PROFICIENCY TESTING BY INTERLABORATORY COMPARISON |
| ISO 7503-3:2016 | Measurement of radioactivity Measurement and evaluation of surface contamination Part 3: Apparatus calibration |
| EN ISO 9697:2017 | Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015) |
| BS EN ISO 19115-2:2010 | Geographic information. Metadata Extensions for imagery and gridded data |
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) |
| CEI EN 61788-17 : 2013 | SUPERCONDUCTIVITY - PART 17: ELECTRONIC CHARACTERISTIC MEASUREMENTS - LOCAL CRITICAL CURRENT DENSITY AND ITS DISTRIBUTION IN LARGE-AREA SUPERCONDUCTING FILMS |
| I.S. EN ISO 11554:2017 | OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS (ISO 11554:2017) |
| UNI EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ISO 18158:2016 | Workplace air Terminology |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
| ISO 12963:2017 | Gas analysis — Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration |
| EN ISO 7500-1:2018 | Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) |
| PREN 15058 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| ISO 16577:2016 | Molecular biomarker analysis — Terms and definitions |
| I.S. EN 61746-1:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
| S.R. CLC/TR 50083-2-1:2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 2-1: ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS |
| CEI EN 61672-1 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS |
| I.S. EN ISO 11616:2017 | HEALTH INFORMATICS - IDENTIFICATION OF MEDICINAL PRODUCTS - DATA ELEMENTS AND STRUCTURES FOR THE UNIQUE IDENTIFICATION AND EXCHANGE OF REGULATED PHARMACEUTICAL PRODUCT INFORMATION (ISO 11616:2017) |
| I.S. EN 60794-1-20:2014 | OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS |
| I.S. EN ISO 10360-7:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| 17/30337117 DC : 0 | BS EN 17212 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF MELAMINE AND CYANURIC ACID CONTENT BY LIQUID CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION (LC-MS/MS) |
| IEC 61745:2017 | End-face image analysis procedure for the calibration of optical fibre geometry test sets |
| ISO 20456:2017 | Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids |
| UNE-EN ISO 25178-6:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009) |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| IEC TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) - Part 1-6: General - Guide to the assessment of measurement uncertainty |
| I.S. EN 61788-15:2011 | SUPERCONDUCTIVITY - PART 15: ELECTRONIC CHARACTERISTIC MEASUREMENTS - INTRINSIC SURFACE IMPEDANCE OF SUPERCONDUCTOR FILMS AT MICROWAVE FREQUENCIES (IEC 61788-15:2011 (EQV)) |
| OIML G 5 : 1989 | HARDNESS STANDARD EQUIPMENT |
| ISO 15112:2011 | Natural gas Energy determination |
| CEI EN 61788-18 : 2014 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| CSA C22.2 No. 80601-2-61 : 2014(R2019) | MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| NF EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| NF EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPER - DESIGN AND METROLOGICAL CHARACTERISTICS |
| OIML R 114 : 1995 | CLINICAL ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT |
| CEI UNI EN ISO/IEC 17000 : 2011 | CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES |
| UNI EN ISO 13102 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS |
| EN ISO 19115-2:2010 | Geographic information - Metadata - Part 2: Extensions for imagery and gridded data (ISO 19115-2:2009) |
| OIML R 112 : 1994 | HIGH PERFORMANCE LIQUID CHROMATOGRAPHS FOR MEASUREMENT OF PESTICIDES AND OTHER TOXIC SUBSTANCES |
| IEC 60942:2017 | Electroacoustics - Sound calibrators |
| NF EN 62129-2 : 2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| DIN EN ISO 7500-1:2016-05 | METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM (ISO 7500-1:2015) |
| ASTM E 1965 : 1998 : R2003 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| IEC TS 62492-1:2008 | Industrial process control devices - Radiation thermometers - Part 1: Technical data for radiation thermometers |
| EN ISO 14253-1:2017 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for verifying conformity or nonconformity with specifications (ISO 14253-1:2017) |
| UNI EN ISO 11135 : 2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNI EN ISO 14978 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| BS EN ISO 80601-2-61:2011 | Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| EN ISO 20553:2017 | Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006) |
| DIN EN ISO 14253-1:2013-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR PROVING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2013) |
| I.S. EN 61672-3:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| I.S. EN ISO 12085:1998 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS |
| EN ISO 16610-61:2015 | Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 16610-61:2015) |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| IEC 61577-4:2009 | Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR) |
| I.S. EN 1330-1:2014&LC:2015 | NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| ISO 8196-1:2009 | Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 1: Analytical attributes of alternative methods |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| IEC 61757:2018 | Fibre optic sensors - Generic specification |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| ISO 21438-1:2007 | Workplace atmospheres Determination of inorganic acids by ion chromatography Part 1: Non-volatile acids (sulfuric acid and phosphoric acid) |
| DIN EN ISO 17662:2016-09 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| DIN EN 13201-4:2016-06 | ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE |
| DIN EN 12211:2016-10 | WINDOWS AND DOORS - RESISTANCE TO WIND LOAD - TEST METHOD |
| DIN EN 1027:2016-09 | WINDOWS AND DOORS - WATER TIGHTNESS - TEST METHOD |
| DIN EN 13352:2012-06 | Specification for the performance of automatic tank contents gauges |
| DIN EN 14211 E : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| DIN EN 14211:2012-11 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| DIN EN 16242:2013-03 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| DIN EN 14789:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| DIN EN 14626:2012-12 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| BS EN 14211:2012 | Ambient air. Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| UNE-EN 14662-3:2016 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| UNE-EN ISO 17662:2016 | Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2016) |
| BS EN 1027:2016 | Windows and doors. Water tightness. Test method |
| IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| BS EN ISO 14532:2017 | Natural gas. Vocabulary |
| ISO 6789-1:2017 | Assembly tools for screws and nuts — Hand torque tools — Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| ISO 13225:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| UNE-EN ISO 15189:2013 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| EN ISO 10360-5:2010 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010) |
| BS EN 14792:2017 | Stationary source emissions. Determination of mass concentration of nitrogen oxides. Standard reference method. Chemiluminescence |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| ISO 11240:2012 | Health informatics Identification of medicinal products Data elements and structures for the unique identification and exchange of units of measurement |
| BS EN ISO 5436-2:2012 | Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards |
| BS EN ISO 4287 : 2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| BS EN ISO 10360-2:2009 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs used for measuring linear dimensions |
| UNE-EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| I.S. EN ISO 17994:2014 | WATER QUALITY - REQUIREMENTS FOR THE COMPARISON OF THE RELATIVE RECOVERY OF MICROORGANISMS BY TWO QUANTITATIVE METHODS (ISO 17994:2014) |
| I.S. EN ISO 10360-2:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN 14211:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF NITROGEN DIOXIDE AND NITROGEN MONOXIDE BY CHEMILUMINESCENCE |
| I.S. EN ISO 15197:2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| I.S. EN ISO 14660-1:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
| I.S. EN 14792:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| I.S. EN ISO 10723:2012 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN 14791:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| I.S. EN ISO 2178:2016 | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| I.S. EN 932-5:2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION |
| I.S. EN ISO 2813:2014 | PAINTS AND VARNISHES - DETERMINATION OF GLOSS VALUE AT 20 DEGREES, 60 DEGREES AND 85 DEGREES (ISO 2813:2014) |
| I.S. EN 14789:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| I.S. EN 1060-3:1997 | NON-INVASIVE SPHYGMOMANOMETERS - PART 3: SUPPLEMENTARY REQUIREMENTS FOR ELECTRO-MECHANICAL BLOOD PRESSURE MEASURING SYSTEMS |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| DIN EN ISO 7218:2014-09 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GENERAL REQUIREMENTS AND GUIDANCE FOR MICROBIOLOGICAL EXAMINATIONS (ISO 7218:2007 + AMD 1:2013, CORRECTED VERSION 2014-04-15) |
| I.S. EN ISO 6974-2:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
| IEC 60942:2017 RLV | Electroacoustics - Sound calibrators |
| I.S. EN 1026:2016 | WINDOWS AND DOORS - AIR PERMEABILITY - TEST METHOD |
| I.S. EN 14790:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| I.S. EN 16242:2012 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| I.S. EN ISO 1:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STANDARD REFERENCE TEMPERATURE FOR THE SPECIFICATION OF GEOMETRICAL AND DIMENSIONAL PROPERTIES (ISO 1:2016) |
| I.S. EN ISO 6976:2016 | NATURAL GAS - CALCULATION OF CALORIFIC VALUES, DENSITY, RELATIVE DENSITY AND WOBBE INDICES FROM COMPOSITION (ISO 6976:2016) |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| I.S. EN 12211:2016 | WINDOWS AND DOORS - RESISTANCE TO WIND LOAD - TEST METHOD |
| I.S. EN 14625:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| I.S. EN 14626:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NON-DISPERSIVE INFRARED SPECTROSCOPY |
| I.S. EN 15058:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| I.S. EN ISO 14532:2017 | NATURAL GAS - VOCABULARY (ISO 14532:2014) |
| I.S. EN ISO 5436-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012) |
| I.S. EN 13352:2012 | SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| I.S. EN ISO 9906:2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| I.S. EN 13201-4:2015 | ROAD LIGHTING - PART 4: METHODS OF MEASURING LIGHTING PERFORMANCE |
| I.S. EN 14212:2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| I.S. EN ISO 6508-1:2016 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 1: TEST METHOD (ISO 6508-1:2016) |
| I.S. EN ISO 17662:2016 | WELDING - CALIBRATION, VERIFICATION AND VALIDATION OF EQUIPMENT USED FOR WELDING, INCLUDING ANCILLARY ACTIVITIES (ISO 17662:2016) |
| I.S. EN ISO 13803:2014 | PAINTS AND VARNISHES - DETERMINATION OF HAZE ON PAINT FILMS AT 20 DEGREES (ISO 13803:2014) |
| I.S. EN ISO 10882-1:2011 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES (ISO 10882-1:2011) |
| I.S. EN 1027:2016 | WINDOWS AND DOORS - WATERTIGHTNESS - TEST METHOD |
| I.S. EN 14662-3:2015 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATIONS - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHY |
| CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| OVE/ONORM EN 61757-1 : 2013 | FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION (IEC 61757-1:2012) |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| ASME B89.7.3.3 : 2002 : R2007 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| VDI/VDE 2631 Blatt 8:2013-09 | Form measurement - Stability monitoring of form measuring systems |
| VDI/VDE 2600 Blatt 1:2013-10 | Inspection process management - Identification, classification and proof of suitability for inspection processes |
| VDI/VDE 2617 Blatt 10.1:2014-05 | Accuracy of coordinate measuring machines - Characteristics and their checking - Laser trackers with multiple probing systems |
| ASME B89.7.3.3:2002 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| ASME B5.57 : 2012 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
| VDI/VDE/DGQ/DKD 2622 Blatt 14.1:2015-02 | Calibration of measuring equipment for electrical quantities - HF signal generators with analog modulation |
| VDI/VDE 2630 Blatt 1.2:2010-11 | Computed tomography in dimensional measurement - Influencing variables on measurement results and recommendations for computed tomography dimensional measurements |
| VDI/VDE/DGQ/DKD 2622 Blatt 20:2013-12 | Calibration of measuring equipment for electrical quantities - Direct-voltage measuring amplifiers |
| ASME B5.57 : 2012 : R2017 | METHODS FOR PERFORMANCE EVALUATION OF COMPUTER NUMERICALLY CONTROLLED LATHES AND TURNING CENTERS |
| VDI/VDE 2630 Blatt 2.1:2015-06 | Computed tomography in dimensional measurement - Determination of the uncertainty of measurement and the test process suitability of coordinate measurement systems with CT sensors |
| I.S. EN ISO 8655-1:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| VDI 2878 Blatt 4:2016-05 | Application of thermography to maintenance diagnostics - Equipment technology |
| VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
| ASME B89.7.3.3 : 2002 : R2012 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| ASME B89.7.3.3 : 2002 : R2017 | GUIDELINES FOR ASSESSING THE RELIABILITY OF DIMENSIONAL MEASUREMENT UNCERTAINTY STATEMENTS |
| BS EN 62321-1:2013 | Determination of certain substances in electrotechnical products Introduction and overview |
| UNE-EN 55016-1-2:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements |
| UNE-EN 16211:2016 | Ventilation for buildings - Measurement of air flows on site - Methods |
| UNE-EN 16450:2017 | Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) |
| CEI EN 61260-2 : 2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS |
| DIN ISO 17123-1:2016-02 (Draft) | OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY (ISO 17123-1:2014) |
| DIN EN ISO 16610-20 E : 2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 20: LINEAR PROFILE FILTERS: BASIC CONCEPTS (ISO 16610-20:2015) |
| DIN EN ISO 13225:2012-08 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| ECA ILAC P14 : 2013 | ILAC POLICY FOR UNCERTAINTY IN CALIBRATION |
| ISO 80601-2-61:2017 | Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
| BS EN ISO 11704:2015 | Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method |
| UNI EN ISO 17450-1 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
| 10/30227686 DC : 0 | BS EN 13352 - SPECIFICATION FOR THE PERFORMANCE OF AUTOMATIC TANK CONTENTS GAUGES |
| UNI EN ISO 25178-604 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS |
| IEC 63041-2:2017 | Piezoelectric sensors - Part 2: Chemical and biochemical sensors |
| 16/30339681 DC : 0 | BS ISO 19685 - VACUUM TECHNOLOGY - VACUUM GAUGES - SPECIFICATIONS, CALIBRATION AND MEASUREMENT UNCERTAINTIES FOR PIRANI GAUGES |
| DIN EN ISO 25178-602:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| PD ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| BS ISO 13160 : 2012 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING |
| 14/30283706 DC : 0 | BS ISO 18589-2 - MEASUREMENT OF RADIOACTIVITY IN THE ENVIRONMENT - SOIL - PART 2: GUIDANCE FOR THE SELECTION OF THE SAMPLING STRATEGY, SAMPLING AND PRE-TREATMENT OF SAMPLES |
| NF EN ISO 17450-1 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
| ANSI/ASA S1.4 PART 1 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS |
| 16/30326493 DC : 0 | BS EN ISO 14644-3 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 3: TEST METHODS |
| 11/30241337 DC : DRAFT JAN 2011 | BS EN 61757-1 - FIBRE OPTIC SENSORS - PART 1: GENERIC SPECIFICATION |
| PD IEC/TS 62720:2017 | Identification of units of measurement for computer-based processing |
| BS ISO 12749-2:2013 | Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Radiological protection |
| BS EN 16104:2012 | Food data. Structure and interchange format |
| 13/30289289 DC : 0 | BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| 10/30219384 DC : 0 | BS EN 15104 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| DD ISO/TS 15530-4:2008 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Evaluating task-specific measurement uncertainty using simulation |
| BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
| 13/30251855 DC : 0 | BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS |
| DIN EN ISO 16610-60 E : 2016 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 60: LINEAR AREAL FILTERS - BASIC CONCEPTS (ISO 16610-60:2015) |
| DIN 51898-1:2014-05 | GAS ANALYSIS - ABSOLUTE VOLUMETRIC METHOD FOR DYNAMIC PREPARATION OF CALIBRATION GASES - PART 1: PREPARATION FROM PURE GASES |
| BS EN ISO 18674-1:2015 | Geotechnical investigation and testing. Geotechnical monitoring by field instrumentation General rules |
| BS ISO 27891:2015 | Aerosol particle number concentration. Calibration of condensation particle counters |
| BS ISO 28218:2010 | Radiation protection. Performance criteria for radiobioassay |
| DIN EN ISO 11704 E : 2015 | WATER QUALITY - MEASUREMENT OF GROSS ALPHA AND BETA ACTIVITY CONCENTRATION IN NON-SALINE WATER - LIQUID SCINTILLATION COUNTING METHOD (ISO 11704:2010) |
| BS EN ISO 10360-8:2013 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with optical distance sensors |
| I.S. EN ISO 9919:2009 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| CEI EN 61788-15 : 2012 | SUPERCONDUCTIVITY - PART 15: ELECTRONIC CHARACTERISTIC MEASUREMENTS - INTRINSIC SURFACE IMPEDANCE OF SUPERCONDUCTOR FILMS AT MICROWAVE FREQUENCIES |
| 09/30118717 DC : DRAFT OCT 2009 | BS ISO 230-1 - TEST CODE FOR MACHINE TOOLS - PART 1: GEOMETRIC ACCURACY OF MACHINES OPERATING UNDER NO-LOAD OR QUASI-STATIC CONDITIONS |
| ISO 24115:2012 | Green coffee — Procedure for calibration of moisture meters — Routine method |
| UNE-EN ISO 11240:2013 | Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) |
| UNE-EN ISO 17034:2017 | General requirements for the competence of reference material producers (ISO 17034:2016) |
| BS EN 61331-2:2014 | Protective devices against diagnostic medical X-radiation Translucent protective plates |
| BS EN ISO 15530-3:2011 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards |
| I.S. EN 15852:2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| DIN EN ISO 16610-85 E : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| BS IEC 60747-14-4:2011 | Semiconductor devices. Discrete devices Semiconductor accelerometers |
| I.S. EN ISO 3611:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| DIN SPEC 1330 : 2013 | INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 3: APPLICATION RULES FOR A REFERENCE DESIGNATION SYSTEM (ISO/TS 81346-3:2012) |
| 13/30275718 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
| UNE-ISO 230-1:2014 | Machine-tools. Test code for machine tools -- Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
| ISO 10790:2015 | Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
| PD IEC/TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments Optical frequency meters using optical frequency combs |
| 16/30330536 DC : 0 | BS EN ISO 18472 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL AND CHEMICAL INDICATORS - TEST EQUIPMENT |
| BS ISO 11929:2010 | Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application |
| 14/30282337 DC : 0 | BS ISO 17123-8 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 8: GNSS FIELD MEASUREMENT SYSTEMS IN REAL-TIME KINEMATIC (RTK) |
| DD IEC TS 62492-1 : DRAFT 2008 | INDUSTRIAL PROCESS CONTROL DEVICES - RADIATION THERMOMETERS - PART 1: TECHNICAL DATA FOR RADIATION THERMOMETERS |
| 12/30236609 DC : 0 | BS EN ISO 4064-4 - WATER METERS INTENDED FOR THE METERING OF COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 |
| I.S. EN ISO 139:2005 | TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| BS EN ISO 25178-606:2015 | Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments |
| BS EN ISO 16140-1:2016 | Microbiology of the food chain. Method validation Vocabulary |
| UNE-EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
| BS 70000:2017 | Medical physics, clinical engineering and associated scientific services in healthcare. Requirements for quality, safety and competence |
| 11/30236651 DC : 0 | BS ISO/IEC 25021 - SYSTEMS AND SOFTWARE ENGINEERING - SYSTEMS AND SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - QUALITY MEASURE ELEMENTS |
| DIN EN 15842 E : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| BS ISO 28057 : 2014 | DOSIMETRY WITH SOLID THERMOLUMINESCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| UNE-EN ISO 13160:2016 | Water quality - Strontium 90 and strontium 89 - Test methods using liquid scintillation counting or proportional counting (ISO 13160:2012) |
| 13/30213519 DC : 0 | BS EN ISO 25178-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 1: INDICATION OF SURFACE TEXTURE |
| UNI EN ISO 12999-1 : 2014 | ACOUSTICS - DETERMINATION AND APPLICATION OF MEASUREMENT UNCERTAINTIES IN BUILDING ACOUSTICS - PART 1: SOUND INSULATION |
| PD ISO/TR 79:2015 | Reference materials. Examples of reference materials for qualitative properties |
| BS EN 62321-2:2014 | Determination of certain substances in electrotechnical products Disassembly, disjointment and mechanical sample preparation |
| UNI EN ISO 25178-601 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| FD ISO/TR 14294 : 2011 FD | WORKPLACE ATMOSPHERES - MEASUREMENT OF DERMAL EXPOSURE - PRINCIPLES AND METHODS |
| BS EN ISO 25178-602:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| DIN ISO 18115-1:2016-09 (Draft) | SURFACE CHEMICAL ANALYSIS - VOCABULARY - PART 1: GENERAL TERMS AND TERMS USED IN SPECTROSCOPY (ISO 18115-1:2013) |
| BS EN ISO 25178-603:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| BS EN 60469:2013 | Transitions, pulses and related waveforms. Terms, definitions and algorithms |
| UNI EN ISO 25178-605 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| UNI EN 12405-2 : 2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| ISO/TS 17518:2015 | Medical laboratories — Reagents for staining biological material — Guidance for users |
| BS EN 16479:2014 | Water quality. Performance requirements and conformity test procedures for water monitoring equipment. Automated sampling devices (samplers) for water and waste water |
| UNI ISO 3534-1 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY |
| EN ISO 9698:2015 | Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010) |
| BS EN 61676 : 2002 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETRIC INSTRUMENTS USED FOR NON-INVASIVE MEASUREMENT OF X-RAY TUBE VOLTAGE IN DIAGNOSTIC RADIOLOGY |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| 11/30215951 DC : 0 | BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS |
| BS EN 61788-11:2011 | Superconductivity Residual resistance ratio measurement. Residual resistance ratio of Nb<sub>3</sub>Sn composite superconductors |
| ISO 19361:2017 | Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting |
| BS ISO 22514-6:2013 | Statistical methods in process management. Capability and performance Process capability statistics for characteristics following a multivariate normal distribution |
| PD CEN/TS 16429:2013 | Stationary source emissions. Sampling and determination of hydrogen chloride content in ducts and stacks. Infrared analytical technique |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| BS ISO 2714:2017 | Liquid hydrocarbons. Volumetric measurement by displacement meter Volumetric measurement by displacement meter systems other than dispensing pumps |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| DD ISO/TS 28037:2010 | Determination and use of straight-line calibration functions |
| 14/30315832 DC : 0 | BS ISO/ASTM 52303 - GUIDE FOR ABSORBED-DOSE MAPPING IN RADIATION PROCESSING FACILITIES |
| ASTM E 2919 : 2014 : REDLINE | Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose |
| BS EN 61788-5:2013 | Superconductivity Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| CEI UNI EN ISO/IEC 17020 : 2012 | CONFORMITY ASSESSMENT REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION |
| 17/30327513 DC : DRAFT APR 2017 | BS EN ISO 11990 - LASERS AND LASER-RELATED EQUIPMENT - DETERMINATION OF LASER RESISTANCE OF TRACHEAL TUBE SHAFT AND TRACHEAL CUFFS |
| BS IEC 61588:2008 | Precision clock synchronization protocol for networked measurement and control systems |
| 17/30351720 DC : 0 | BS EN ISO 11607-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: VALIDATION REQUIREMENTS FOR FORMING, SEALING AND ASSEMBLY PROCESSES |
| UNI ISO 22514-6 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION |
| CEI EN 61746-1 : 2012 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES |
| DIN EN ISO 10360-10:2017-03 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| 12/30258958 DC : 0 | BS ISO 16610-29 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 29: LINEAR PROFILE FILTERS: SPLINE WAVELETS |
| DD ISO/TS 16610-31:2010 | Geometrical product specifications (GPS). Filtration Robust profile filters. Gaussian regression filters |
| PREN 14212 : DRAFT 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF SULPHUR DIOXIDE BY ULTRAVIOLET FLUORESCENCE |
| UNI EN ISO 15530-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
| PREN 17212 : DRAFT 2017 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALSYSIS - DETERMINATION OF MELAMINE AND CYANURIC ACID CONTENT BYLIQUID CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION (LC-MS/MS) |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| DIN EN ISO 16610-21 E : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| ISO 7503-1:2016 | Measurement of radioactivity Measurement and evaluation of surface contamination Part 1: General principles |
| BS EN ISO 14253-5:2015 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments |
| 14/30293544 DC : 0 | BS EN 14791 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| 14/30293551 DC : 0 | BS EN 14790 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE WATER VAPOUR IN DUCTS - STANDARD REFERENCE METHOD |
| BS ISO 16331-1:2017 | Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments Performance of handheld laser distance meters |
| BS ISO 16578:2013 | Molecular biomarker analysis — General definitions and requirements for microarray detection of specific nucleic acid sequences |
| UNE-EN 55016-2-2:2012 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| PD IEC/TS 62492-2:2013 | Industrial process control devices. Radiation thermometers Determination of the technical data for radiation thermometers |
| UNE-EN ISO 11135:2015 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| EN 61788-17:2013 | Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films |
| 11/30218530 DC : DRAFT FEB 2011 | BS ISO 16331-1 - OPTICS AND OPTICAL INSTRUMENTS - LABORATORY PROCEDURES FOR TESTING SURVEYING AND CONSTRUCTION INSTRUMENTS - PART 1: PERFORMANCE OF HANDHELD LASER DISTANCE METERS |
| OIML R 137-1 : 2006 | GAS METERS - PART 1: REQUIREMENTS |
| DIN EN ISO 10360-7:2011-09 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 7: CMMs equipped with imaging probing systems (ISO 10360-7:2011) |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| IEC 62754:2017 | Computation of waveform parameter uncertainties |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| CEI EN 61788-19 : 2014 | SUPERCONDUCTIVITY - PART 19: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF REACTED NB[3]SN COMPOSITE SUPERCONDUCTORS |
| BS ISO 8196-1:2009 | Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis Analytical attributes of alternative methods |
| I.S. EN ISO 16610-21:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS (ISO 16610-21:2011) |
| 17/30349807 DC : 0 | BS EN ISO 9698 - WATER QUALITY - TRITIUM - TEST METHOD USING LIQUID SCINTILLATION COUNTING |
| 17/30347911 DC : 0 | BS ISO 11929-3 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 3: APPLICATIONS TO UNFOLDING METHODS |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| I.S. EN ISO 16610-60:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 60: LINEAR AREAL FILTERS: BASIC CONCEPTS (ISO 16610-60:2015) |
| 13/30282602 DC : 0 | BS ISO 12749-3 - NUCLEAR ENERGY - VOCABULARY - PART 3: NUCLEAR FUEL CYCLE |
| 09/30198179 DC : 0 | BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
| BS ISO 3567:2011 | Vacuum gauges. Calibration by direct comparison with a reference gauge |
| UNI EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| NF EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| ISO/IEC 18014-4:2015 | Information technology Security techniques Time-stamping services Part 4: Traceability of time sources |
| 13/30275855 DC : 0 | BS EN ISO 16948 - SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN |
| PD CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| BS EN 61788-4:2016 | Superconductivity Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors |
| 12/30250460 DC : 0 | BS ISO 16378 - SPACE SYSTEMS - MEASUREMENTS OF THERMO-OPTICAL PROPERTIES OF THERMO CONTROL MATERIALS |
| 12/30251867 DC : 0 | BS EN ISO 16610-71 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
| UNE-EN ISO 16638-1:2018 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| 13/30255474 DC : 0 | BS ISO 7504 - GAS ANALYSIS - VOCABULARY |
| 12/30255293 DC : 0 | BS EN 14890-1 - APPLICATION INTERFACE FOR SMART CARDS USED AS SECURE SIGNATURE CREATION DEVICES - PART 1: BASIC SERVICES |
| BS ISO 16378:2013 | Space systems - Measurements of thermo-optical properties of thermal control materials |
| UNE-EN 16457:2014 | Characterization of waste - Framework for the preparation and application of a testing programme - Objectives, planning and report |
| 11/30247969 DC : 0 | ISO/DIS 22514-6.2 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 6: PROCESS CAPABILITY STATISTICS FOR CHARACTERISTICS FOLLOWING A MULTIVARIATE NORMAL DISTRIBUTION |
| BS ISO 9698 : 2010 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD |
| 11/30211367 DC : DRAFT JULY 2011 | BS ISO 17123-4 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 4: ELECTRO-OPTICAL DISTANCE METERS (EDM INSTRUMENTS) |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| BS EN ISO 13102:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics |
| 17/30356073 DC : 0 | BS ISO 19101-2 - GEOGRAPHIC INFORMATION - REFERENCE MODEL - PART 2: IMAGERY |
| BS EN ISO 10360-9:2013 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) CMMs with multiple probing systems |
| 14/30288062 DC : 0 | BS EN 61377 ED. 2.0 - RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| 14/30291326 DC : 0 | BS EN ISO 10360-12 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) |
| BS ISO/IEC 19761:2011 | Software engineering. COSMIC: A functional size measurement method |
| UNE-EN ISO 17450-1:2015 | Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011) |
| BS ISO 12764:2017 | Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| 16/30341489 DC : 0 | BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| 17/30339109 DC : 0 | BS ISO 17123-9 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 9: TERRESTRIAL LASER SCANNERS |
| 09/30198176 DC : 0 | BS EN ISO 17450-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION |
| BS EN ISO 11135:2014 | Sterilization of health-care products. Ethylene oxide. Requirements for the development, validation and routine control of a sterilization process for medical devices |
| DIN EN 15104:2011-04 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| UNI EN ISO 16610-71 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 71: ROBUST AREAL FILTERS: GAUSSIAN REGRESSION FILTERS |
| EN ISO 11135:2014 | Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) |
| ISO/TS 15530-4:2008 | Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation |
| UNI EN ISO 3611 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| EN 62754:2017 | Computation of waveform Parameter uncertainties |
| BS EN ISO 8598-1:2014 | Optics and optical instruments. Focimeters General purpose instruments |
| CAN/CSA-ISO/IEC 15944-9:16 | Information technology Business Operational View Part 9: Business transaction traceability framework for commitment exchange (Adopted ISO/IEC 15944-9:2015, first edition, 2015-10-01) |
| INCITS/ISO TS 19159-1 : 2015 | GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS |
| I.S. EN 60469:2013 | TRANSITIONS, PULSES AND RELATED WAVEFORMS - TERMS, DEFINITIONS AND ALGORITHMS (IEC 60469:2013 (EQV)) |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| CSA Z11135-1 : 2009 : R2014 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-ISO/IEC 17007:2010 | Conformity assessment. Guidance for drafting normative documents suitable for use for conformity assessment |
| DIN EN ISO 80000-1 E : 2013 | QUANTITIES AND UNITS - PART 1: GENERAL (ISO 80000-1:2009 + COR 1:2011) |
| CEN ISO/TS 17450-1:2007/AC:2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO/TS 17450-1:2005/COR 1:2007) |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| ISO 11352:2012 | Water quality — Estimation of measurement uncertainty based on validation and quality control data |
| I.S. EN 12405-2:2012 | GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION |
| CSA Z9919 :2007 | MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE |
| I.S. EN 16104:2012 | FOOD DATA - STRUCTURE AND INTERCHANGE FORMAT |
| UNE-EN ISO 10360-10:2017 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 10: Laser trackers for measuring point-to-point distances (ISO 10360-10:2016) |
| UNE-EN ISO 12999-1:2014 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| ASTM D 6568 : 2000 : R2011 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| IEC 61788-23:2018 | Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors |
| ISO 16378:2013 | Space systems — Measurements of thermo-optical properties of thermal control materials |
| CISPR 16-1-1 REDLINE : 4ED 2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS |
| ISO 12764:2017 | Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
| PREN 12341 : DRAFT 2012 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM 10 OR PM 2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| DIN EN ISO 25178-603:2014-02 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| UNE-EN ISO 80601-2-56:2013 | Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2009) |
| CEI UNI ISO/IEC 17007 : 2012 | CONFORMITY ASSESSMENT - GUIDANCE FOR DRAFTING NORMATIVE DOCUMENTS SUITABLE FOR USE FOR CONFORMITY ASSESSMENT |
| I.S. EN 61788-6:2011 | SUPERCONDUCTIVITY - PART 6: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF CU/NB-TI COMPOSITE SUPERCONDUCTORS |
| ISO/TR 14253-6:2012 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
| S.R. CEN/TR 16269:2011 | AMBIENT AIR - GUIDE FOR THE MEASUREMENT OF ANIONS AND CATIONS IN PM2,5 |
| BS EN 61526:2013 | Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters |
| BS EN 60731:2012 | Medical electrical equipment. Dosimeters with ionization chambers as used in radiotherapy |
| ISO 10360-12:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 12: Articulated arm coordinate measurement machines (CMM) |
| CEI UNI EN ISO/IEC 17011 : 2008 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| ISO 29473:2010 | Fire tests — Uncertainty of measurements in fire tests |
| BS ISO 16610-30:2015 | Geometrical product specifications (GPS). Filtration Robust profile filters: Basic concepts |
| UNE-EN ISO 9698:2016 | Water quality - Determination of tritium activity concentration - Liquid scintillation counting method (ISO 9698:2010) |
| IEC 61526:2010 | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters |
| ISO 16610-29:2015 | Geometrical product specifications (GPS) Filtration Part 29: Linear profile filters: Spline wavelets |
| ISO 17123-4:2012 | Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors) |
| I.S. CEN/TS 17021:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF SULPHUR DIOXIDE BY INSTRUMENTAL TECHNIQUES |
| CEI EN 61315 : 2007 | CALIBRATION OF FIBRE-OPTIC POWER METERS |
| I.S. EN 62127-2:2007 | ULTRASONICS - HYDROPHONES - PART 2: CALIBRATION FOR ULTRASONIC FIELDS UP TO 40 MHZ |
| BS EN ISO 11616:2017 | Health informatics. Identification of medicinal products. Data elements and structures for unique identification and exchange of regulated pharmaceutical product information |
| I.S. EN 60846-1:2014 | RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS |
| I.S. EN 12405-3:2015 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| I.S. EN ISO 13843:2017 | WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017) |
| I.S. EN ISO 16610-85:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 85: MORPHOLOGICAL AREAL FILTERS: SEGMENTATION (ISO 16610-85:2013) |
| CISPR 16-1-1:2015 RLV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| I.S. EN ISO 6789-2:2017 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - HAND TORQUE TOOLS - PART 2: REQUIREMENTS FOR CALIBRATION AND DETERMINATION OF MEASUREMENT UNCERTAINLY (ISO 6789-2:2017) |
| BS EN ISO 9697:2017 | Water quality. Gross beta activity in non-saline water. Test method using thick source |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| UNI ISO 11843-1 : 2009 | CAPABILITY OF DETECTION - PART 1: TERMS AND DEFINITIONS |
| NF EN ISO 10360-7 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 7: CMMS EQUIPPED WITH IMAGING PROBING SYSTEMS |
| UNI ISO 20553 : 2009 | RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL |
| I.S. EN IEC 63041-2:2018 | PIEZOELECTRIC SENSORS - PART 2: CHEMICAL AND BIOCHEMICAL SENSORS |
| I.S. EN ISO 4064-4:2014 | WATER METERS FOR COLD POTABLE WATER AND HOT WATER - PART 4: NON-METROLOGICAL REQUIREMENTS NOT COVERED IN ISO 4064-1 (ISO 4064-4:2014) |
| EN 61745:2017 | End-face image analysis procedure for the calibration of optical fibre geometry test sets |
| ISO 14470:2011 | Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food |
| ISO 21438-3:2010 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides |
| EN ISO 15378:2017 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017) |
| UNI EN 15852 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF TOTAL GASEOUS MERCURY |
| S.R. CEN/TR 10317:2014 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| AAMI ISO 11135-1 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| ISO 26824:2013 | Particle characterization of particulate systems — Vocabulary |
| ISO/ASTM 52303:2015 | Guide for absorbed-dose mapping in radiation processing facilities |
| S.R. CEN ISO/TS 19397:2018 | DETERMINATION OF THE FILM THICKNESS OF COATINGS USING AN ULTRASONIC GAGE (ISO/TS 19397:2015) |
| I.S. EN ISO 10360-12:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 12: ARTICULATED ARM COORDINATE MEASUREMENT MACHINES (CMM) (ISO 10360-12:2016) |
| I.S. EN ISO 29661:2017 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015) |
| OIML R 139 : 2007 | COMPRESSED GASEOUS FUEL MEASURING SYSTEMS FOR VEHICLES |
| I.S. EN 61745:2017 | END-FACE IMAGE ANALYSIS PROCEDURE FOR THE CALIBRATION OF OPTICAL FIBRE GEOMETRY TEST SETS |
| I.S. EN ISO 19115-2:2010 | GEOGRAPHIC INFORMATION - METADATA - PART 2: EXTENSIONS FOR IMAGERY AND GRIDDED DATA |
| ISO 21501-4:2007 | Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne particle counter for clean spaces |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
| S.R. CEN ISO/TS 16491:2012 | GUIDELINES FOR THE EVALUATION OF UNCERTAINTY OF MEASUREMENT IN AIR CONDITIONER AND HEAT PUMP COOLING AND HEATING CAPACITY TESTS (ISO/TS 16491:2012) |
| EN 60193:1999 | Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
| I.S. EN ISO/IEC 17020:2012 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION (ISO/IEC 17020:2012) |
| UNE-EN ISO 9493:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| UNE 80407:2014 | Metrological control of measuring equipment used in the cement test |
| UNI EN 15853 : 2010 | AMBIENT AIR QUALITY - STANDARD METHOD FOR THE DETERMINATION OF MERCURY DEPOSITION |
| BS ISO 16637:2016 | Radiological protection. Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources |
| BS EN ISO 6145-1:2008 | Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods Methods of calibration |
| I.S. EN 61331-2:2014 | PROTECTIVE DEVICES AGAINST DIAGNOSTIC MEDICAL X-RADIATION - PART 2: TRANSLUCENT PROTECTIVE PLATES |
| EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| CLC/TR 50083-2-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 2-1: Electromagnetic compatibility measurements |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| IEC 62343-5-2:2018 | Dynamic modules - Part 5-2: Test methods - 1 x N fixed-grid WSS - Dynamic crosstalk measurement |
| I.S. EN 61788-16:2013 | SUPERCONDUCTIVITY - PART 16: ELECTRONIC CHARACTERISTIC MEASUREMENTS - POWER-DEPENDENT SURFACE RESISTANCE OF SUPERCONDUCTORS AT MICROWAVE FREQUENCIES (IEC 61788-16:2013 (EQV)) |
| EN 61757-2-2:2017 | Fibre optic sensors - Part 2-2: Temperature measurement - Distributed sensing |
| BS EN ISO 11665-1:2015 | Measurement of radioactivity in the environment. Air: radon-222 Origins of radon and its short-lived decay products and associated measurement methods |
| DIN EN 13032-4 E : 2015 | LIGHT AND LIGHTING - MEASUREMENT AND PRESENTATION OF PHOTOMETRIC DATA OF LAMPS AND LUMINAIRES - PART 4: LED LAMPS, MODULES AND LUMINAIRES |
| UNI EN ISO 13225 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ASTM D 6568 : 2000 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| UNE-ISO 230-2:2016 | Test code for machine tools -- Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
| ASTM E 3083 : 2017 | Standard Terminology Relating to Radiation Processing: Dosimetry and Applications |
| OIML D 9 : 2004 | PRINCIPLES OF METROLOGICAL SUPERVISION |
| OIML R 133 : 2002 | LIQUID-IN-GLASS THERMOMETERS |
| ASTM D 6568 : 2000 : R2018 | Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples |
| EN ISO 9696:2017 | Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017) |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| UNI ISO 3534-2 : 2014 | STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS |
| IEC TS 62720:2017 | Identification of units of measurement for computer-based processing |
| EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
| IEC 61005:2014 | Radiation protection instrumentation - Neutron ambient dose equivalent (rate) meters |
| EN ISO 11616:2017 | Health informatics - Identification of medicinal products - Data elements and structures for the Unique Identification and Exchange of regulated Pharmaceutical Product Information (ISO 11616:2017) |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
| ISO 29661:2012 | Reference radiation fields for radiation protection — Definitions and fundamental concepts |
| I.S. EN 55016-1-5:2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-5: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNA CALIBRATION SITES AND REFERENCE TEST SITES FOR 5 MHZ TO 18 GHZ |
| ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| ISO 12749-4:2015 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing |
| ISO/ASTM 51940:2013 | Guide for dosimetry for sterile insects release programs |
| BS EN ISO 11607-1:2017 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| ISO 19115-2:2009 | Geographic information Metadata Part 2: Extensions for imagery and gridded data |
| ISO 80601-2-56:2017 | Medical electrical equipment — Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement |
| ISO 17091:2013 | Workplace air — Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide — Method by measurement of corresponding cations by suppressed ion chromatography |
| I.S. EN 55016-2-2:2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| IEC 60747-14-4:2011 | Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers |
| CISPR 16-2-3 REDLINE : 4ED 2016 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
| I.S. EN 61672-2:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS |
| I.S. EN 60904-4:2009 | PHOTOVOLTAIC DEVICES - PART 4: REFERENCE SOLAR DEVICES - PROCEDURES FOR ESTABLISHING CALIBRATION TRACEABILITY |
| I.S. EN 61207-1:2010 | EXPRESSION OF PERFORMANCE OF GAS ANALYZERS - PART 1: GENERAL |
| IEC 62522:2014 | Calibration of tuneable laser sources |
| CISPR TR 18-3:2017 | Radio interference characteristics of overhead power lines and high-voltage equipment - Part 3: Code of practice for minimizing the generation of radio noise |
| UNE-EN ISO/IEC 17020:2012 | Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
| I.S. EN ISO/IEC 17011:2017 | CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES (ISO/IEC 17011:2017) |
| I.S. EN 61672-1:2013 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 1: SPECIFICATIONS |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| DIN EN ISO 10360-2:2010-06 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 2: CMMs used for measuring linear dimensions (ISO 10360-2:2009) |
| DIN EN 932-5:2012-05 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| DIN EN 1026:2016-09 | WINDOWS AND DOORS - AIR PERMEABILITY - TEST METHOD |
| DIN EN ISO 10360-5:2011-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| DIN EN ISO 10882-1:2012-01 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| DIN EN ISO 13803:2015-02 | PAINTS AND VARNISHES - DETERMINATION OF HAZE ON PAINT FILMS AT 20 DEGREES (ISO 13803:2014) |
| DIN EN ISO 21572 E : 2013 | FOODSTUFFS - MOLECULAR BIOMARKER ANALYSIS - PROTEIN-BASED METHODS (ISO 21572:2013) |
| DIN EN 14792 E : 2006 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| DIN EN ISO 15189:2014-11 | Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| DIN EN 14626 E : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF CARBON MONOXIDE BY NON-DISPERSIVE INFRARED SPECTROSCOPY |
| DIN EN ISO 6974-2:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| DIN EN 14212:2012-11 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| ISO 1:2016 | Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties |
| UNE-EN ISO 6974-2:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| BS EN ISO 9919:2009 | Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| ISO 384:2015 | Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments |
| BS EN ISO 6789:2003 | Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| ISO 463:2006 | Geometrical Product Specifications (GPS) Dimensional measuring equipment Design and metrological characteristics of mechanical dial gauges |
| ISO 15197:2013 | In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
| UNE-EN ISO 10882-1:2012 | Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) |
| UNE-EN ISO 11665-1:2016 | Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods (ISO 11665-1:2012) |
| IEC 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
| UNE-EN 1026:2017 | Windows and doors - Air permeability - Test method |
| DIN EN 14792:2006-04 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| UNE-EN ISO 16948:2015 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) |
| UNE-EN ISO 2813:2015 | Paints and varnishes - Determination of gloss value at 20º, 60º and 85º (ISO 2813:2014) |
| BS EN ISO 9906:2012 | Rotodynamic pumps. Hydraulic performance acceptance tests. Grades 1, 2 and 3 |
| DIN EN ISO 9906:2013-03 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 (ISO 9906:2012) |
| ISO 6145-1:2003 | Gas analysis Preparation of calibration gas mixtures using dynamic volumetric methods Part 1: Methods of calibration |
| ISO 16641:2014 | Measurement of radioactivity in the environment Air Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors |
| IEC 61788-5:2013 | Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| IEC 61788-15:2011 | Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies |
| ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics |
| UNE-EN 15104:2011 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen - Instrumental methods |
| UNE-EN 14154-1:2005 | Water meters - Part 1: General requirements |
| EN 61757-1-1:2017 | Fibre optic sensors – Part 1-1: Strain measurement – Strain sensors based on fibre Bragg gratings |
| EN ISO 12999-1:2014 | Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 1: Sound insulation (ISO 12999-1:2014) |
| EN 55016-1-5:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-5: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNA CALIBRATION SITES AND REFERENCE TEST SITES FOR 5 MHZ TO 18 GHZ (CISPR 16-1-5:2014/A1:2016) |
| EN 55016-2-1:2014/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-1: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - CONDUCTED DISTURBANCE MEASUREMENTS (CISPR 16-2-1:2014/A1:2017) |
| EN 55016-4-2:2011/A1:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| I.S. EN ISO 13385-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| EN ISO 13385-2:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| NASA HDBK 8739.19-4 : 2010 | ESTIMATION AND EVALUATION OF MEASUREMENT DECISION RISK - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 4 |
| CSA ISO 16948 : 2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN |
| UNE-EN ISO 10360-5:2012 | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010) |
| EN ISO 11704:2015 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
| EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| I.S. EN ISO 21572:2013 | FOODSTUFFS - MOLECULAR BIOMARKER ANALYSIS - PROTEIN-BASED METHODS (ISO 21572:2013) |
| I.S. EN ISO 9000:2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| ONORM EN ISO 13385-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| ONORM EN ISO 10360-5 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| UNI EN ISO 10360-5 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 5: CMMS USING SINGLE AND MULTIPLE STYLUS CONTACTING PROBING SYSTEMS |
| EN 14662-3:2015 | Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| EN ISO 16610-60:2015 | Geometrical Product Specification (GPS) - Filtration - Part 60: Linear areal filters: Basic concepts (ISO 16610-60:2015) |
| EN ISO 6789-1:2017 | Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance (ISO 6789-1:2017) |
| EN ISO 13803:2014 | Paints and varnishes - Determination of haze on paint films at 20° (ISO 13803:2014) |
| EN ISO 14660-1:1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
| EN ISO 14532:2017 | Natural gas - Vocabulary (ISO 14532:2014) |
| EN ISO 16140-1:2016 | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
| EN ISO 25178-6:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010) |
| EN ISO 16948:2015 | Solid biofuels - Determination of total content of carbon, hydrogen and nitrogen (ISO 16948:2015) |
| PREN ISO 25178-7 : DRAFT 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 7: SOFTWARE MEASUREMENT STANDARDS |
| UNI EN ISO 463 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| UNI EN ISO 8655-1 : 2004 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| UNI EN ISO 15212-1 : 2000 | OSCILLATION-TYPE DENSITY METERS - LABORATORY INSTRUMENTS |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
| UNI EN 14625 : 2012 | AMBIENT AIR - STANDARD METHOD FOR THE MEASUREMENT OF THE CONCENTRATION OF OZONE BY ULTRAVIOLET PHOTOMETRY |
| UNI EN ISO 10882-1 : 2012 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - SAMPLING OF AIRBORNE PARTICLES AND GASES IN THE OPERATOR'S BREATHING ZONE - PART 1: SAMPLING OF AIRBORNE PARTICLES |
| UNI EN ISO 9906 : 2012 | ROTODYNAMIC PUMPS - HYDRAULIC PERFORMANCE ACCEPTANCE TESTS - GRADES 1, 2 AND 3 |
| UNI EN ISO 15189 : 2013 | MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE |
| EN ISO 9919:2009 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005) |
| EN ISO 25178-605:2014 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) |
| UNI EN 14154-1 : 2011 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 5436-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS |
| UNI EN ISO 6974-2 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| UNI EN ISO 6974-1 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| UNI EN 932-5 : 2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| UNI EN 16242 : 2013 | CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNI EN ISO 17994 : 2014 | WATER QUALITY - REQUIREMENTS FOR THE COMPARISON OF THE RELATIVE RECOVERY OF MICROORGANISMS BY TWO QUANTITATIVE METHODS |
| UNI EN 15104 : 2011 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN - INSTRUMENTAL METHODS |
| UNI EN ISO 10360-2 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 2: CMMS USED FOR MEASURING LINEAR DIMENSIONS |
| UNI EN ISO 4287 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| UNI EN ISO 10723 : 2013 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
| UNI EN 12341 : 2014 | AMBIENT AIR - STANDARD GRAVIMETRIC MEASUREMENT METHOD FOR THE DETERMINATION OF THE PM10 OR PM2,5 MASS CONCENTRATION OF SUSPENDED PARTICULATE MATTER |
| IES HB 10 : 2011 | THE LIGHTING HANDBOOK |
| ASTM E 1965 : 1998 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature |
| BS ISO 7503-3:2016 | Measurement of radioactivity. Measurement and evaluation of surface contamination Apparatus calibration |
| UNI CEN/TS 16429 : 2013 | STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF HYDROGEN CHLORIDE CONTENT IN DUCTS AND STACKS - INFRARED ANALYTICAL TECHNIQUE |
| DIN EN 16440-1 E : 2015 | TESTING METHODOLOGIES OF REFRIGERATING DEVICES FOR INSULATED MEANS OF TRANSPORT - PART 1: MECHANICAL COOLING DEVICE WITH FORCED AIR CIRCULATION EVAPORATOR WITH OR WITHOUT HEATING DEVICE |
| BIS IS/ISO/IEC GUIDE 43-1 : 1997 | PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME |
| DIN EN ISO 25178-601:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| DIN EN ISO 11771:2011-04 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| 13/30241125 DC : 0 | BS ISO/IEC 33003 - INFORMATION TECHNOLOGY - PROCESS ASSESSMENT - REQUIREMENTS FOR PROCESS MEASUREMENT FRAMEWORKS |
| OIML D 22 : 1991 | GUIDE TO PORTABLE INSTRUMENTS FOR ASSESSING AIRBORNE POLLUTANTS ARISING FROM HAZARDOUS WASTES |
| CSA C22.2 No. 80601-2-59 : 2010 : INC : COR 1 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-59: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SCREENING THERMOGRAPHS FOR HUMAN FEBRILE TEMPERATURE SCREENING |
| BS ISO 12749-3:2015 | Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Nuclear fuel cycle |
| I.S. EN 61377:2016 | RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS |
| PD ISO/TS 14101:2012 | Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
| PD ISO/TR 16476:2016 | Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials |
| 10/30213495 DC : 0 | BS ISO 10360-9 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
| 14/30293548 DC : 0 | BS EN 14792 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF NITROGEN OXIDES - STANDARD REFERENCE METHOD: CHEMILUMINESCENCE |
| CSA C22.2 No. 80601-2-59 : 2010 : R2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-59: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SCREENING THERMOGRAPHS FOR HUMAN FEBRILE TEMPERATURE SCREENING |
| DIN EN ISO 13102:2012-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| DIN EN 16479 E : 2014 | WATER QUALITY - PERFORMANCE REQUIREMENTS AND CONFORMITY TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - AUTOMATED SAMPLING DEVICES (SAMPLERS) FOR WATER AND WASTE WATER |
| 12/30247768 DC : 0 | BS ISO 12749-2 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 2: RADIOLOGICAL PROTECTION |
| 12/30271500 DC : 0 | BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
| BS ISO 18115-1:2013 | Surface chemical analysis. Vocabulary General terms and terms used in spectroscopy |
| 11/30205376 DC : 0 | BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| 17/30345272 DC : 0 | BS ISO 14167 - GAS ANALYSIS - GENERAL QUALITY ASPECTS AND METROLOGICAL TRACEABILITY OF CALIBRATION GAS MIXTURES |
| BS EN 61788-16:2013 | Superconductivity Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies |
| UNI EN 1911 : 2010 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF GASEOUS CHLORIDES EXPRESSED AS HCL - STANDARD REFERENCE METHOD |
| UNI CEN ISO/TS 15530-1 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS |
| 12/30258979 DC : 0 | BS ISO 10790 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - GUIDANCE TO THE SELECTION, INSTALLATION AND USE OF CORIOLIS METERS (MASS FLOW, DENSITY AND VOLUME FLOW MEASUREMENTS) |
| NF ISO 9698 : 2011 | WATER QUALITY - DETERMINATION OF TRITIUM ACTIVITY CONCENTRATION - LIQUID SCINTILLATION COUNTING METHOD |
| BS EN ISO 16610-60:2015 | Geometrical Product Specification (GPS). Filtration Linear areal filters: Basic concepts |
| BS ISO 21438-2:2009 | Workplace atmospheres. Determination of inorganic acids by ion chromatography Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| PREN 1330-1 : DRAFT 2014 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| UNI ISO/TS 15530-4 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 4: EVALUATING TASK-SPECIFIC MEASUREMENT UNCERTAINTY USING SIMULATION |
| NFM 60 809 : 2011 | NUCLEAR ENERGY - MEASUREMENT OF THE RADIOACTIVITY IN THE ENVIRONMENT - WATER - MEASUREMENT OF LEAD 210 ACTIVITY BY LIQUID SCINTILLATION IN WATER |
| 13/30277750 DC : 0 | BS ISO 9697 - WATER QUALITY - MEASUREMENT OF GROSS BETA ACTIVITY IN NON-SALINE WATER - THICK SOURCE METHOD |
| UNI EN ISO 16610-21 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 21: LINEAR PROFILE FILTERS: GAUSSIAN FILTERS |
| UNI EN ISO 10360-9 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING SYSTEMS (CMS) - PART 9: CMMS WITH MULTIPLE PROBING SYSTEMS |
| DIN ISO 16063-16:2015-11 | METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 16: CALIBRATION BY EARTH'S GRAVITATION (ISO 16063-16:2014) |
| 17/30344899 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
| CSA C22.2 No. 80601-2-59 : 2010FR | MEDICAL ELECTRICAL EQUIPMENT - PART 2-59: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SCREENING THERMOGRAPHS FOR HUMAN FEBRILE TEMPERATURE SCREENING |
| CSA ISO 15197 : 2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| 11/30243401 DC : 0 | BS ISO 3567 - VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE |
| I.S. EN ISO 9697:2017 | WATER QUALITY - GROSS BETA ACTIVITY IN NON-SALINE WATER - TEST METHOD USING THICK SOURCE (ISO 9697:2015) |
| BS EN ISO 15796:2008 | Gas analysis. Investigation and treatment of analytical bias |
| BS EN ISO 1683:2015 | Acoustics. Preferred reference values for acoustical and vibratory levels |
| DIN ISO 3310-1:2001-09 | TEST SIEVES - TECHNICAL REQUIREMENTS AND TESTING - PART 1: TEST SIEVES OF METAL WIRE CLOTH (ISO 3310-1:2016) |
| 16/30299911 DC : 0 | BS ISO 21501-4 - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SINGLE PARTICLE LIGHT INTERACTION METHODS - PART 4: LIGHT SCATTERING AIRBORNE PARTICLE COUNTER FOR CLEAN SPACES |
| 11/30241735 DC : 0 | BS ISO 14291 - VACUUM TECHNOLOGY - VACUUM GAUGES - DEFINITIONS AND SPECIFICATIONS FOR QUADRUPOLE MASS SPECTROMETERS |
| 13/30294275 DC : 0 | BS ISO GUIDE 30 - REFERENCE MATERIALS - SELECTED TERMS AND DEFINITIONS |
| ISO/TR 16476:2016 | Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
| BS EN 12405-3:2015 | Gas meters. Conversion devices Flow computer |
| 12/30229938 DC : 0 | BS IEC 61577-2 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 2: SPECIFIC REQUIREMENTS FOR [222]RN AND [220]RN MEASURING INSTRUMENTS |
| DIN 58964:2015-09 | Quality assurance of POCT results - Assessment criteria for comparison measurement and implementation |
| 14/30293541 DC : 0 | BS EN 14789 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN (O2) - STANDARD REFERENCE METHOD - PARAMAGNETISM |
| BS EN ISO 4064-1:2017 | Water meters for cold potable water and hot water Metrological and technical requirements |
| NF EN ISO 9493 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| 12/30241725 DC : 0 | BS ISO 28057 - DOSIMETRY WITH SOLID THERMOLUMINSCENCE DETECTORS FOR PHOTON AND ELECTRON RADIATIONS IN RADIOTHERAPY |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| 10/30229130 DC : 0 | BS EN 62321-1 ED 1 - DETERMINATION OF CERTAIN SUBSTANCES IN ELECTRO TECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| I.S. EN ISO 1683:2015 | ACOUSTICS - PREFERRED REFERENCE VALUES FOR ACOUSTICAL AND VIBRATORY LEVELS (ISO 1683:2015) |
| CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| BS EN ISO 11240:2012 | Health informatics. Identification of medicinal products. Data elements and structures for the unique identification and exchange of units of measurement |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| OIML D 10 : 2007 | GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS |
| OIML D 31 : 2008 | GENERAL REQUIREMENTS FOR SOFTWARE CONTROLLED MEASURING INSTRUMENTS |
| BS EN ISO 13160:2015 | Water quality. Strontium 90 and strontium 89. Test methods using liquid scintillation counting or proportional counting |
| 09/30194820 DC : 0 | BS EN 60731 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY |
| UNE-EN ISO 20857:2013 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| I.S. EN 61005:2017 | RADIATION PROTECTION INSTRUMENTATION - NEUTRON AMBIENT DOSE EQUIVALENT (RATE) METERS |
| UNE-EN ISO 16610-21:2013 | Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO 16610-21:2011) |
| BS ISO 24115:2012 | Green coffee. Procedure for calibration of moisture meters. Routine method |
| 14/30316056 DC : 0 | BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION |
| BS ISO 16577:2016 | Molecular biomarker analysis. Terms and definitions |
| I.S. EN ISO 9493:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| ISO 11704:2010 | Water quality Measurement of gross alpha and beta activity concentration in non-saline water Liquid scintillation counting method |
| FD ISO/TR 14253-6 : 2013 FD | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 6: GENERALIZED DECISION RULES FOR THE ACCEPTANCE AND REJECTION OF INSTRUMENTS AND WORKPIECES |
| 09/30174815 DC : 0 | BS ISO 29661 - REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS |
| 11/30208525 DC : 0 | BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| BS EN 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments Optical spectrum analyzers |
| UNE-EN ISO 25178-1:2016 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) |
| PD ISO GUIDE 30:2015 | Reference materials. Selected terms and definitions |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| NF EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| BS EN ISO 16610-28:2016 | Geometrical product specifications (GPS). Filtration Profile filters: End effects |
| PD ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| 12/30218281 DC : 0 | BS ISO 80003-3 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 3: CHEMISTRY |
| BS EN 61746-2:2011 | Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres |
| BS EN ISO 6789-2:2017 | Assembly tools for screws and nuts. Hand torque tools Requirements for calibration and determination of measurement uncertainty |
| OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
| PD IEC/TR 61000-1-6:2012 | Electromagnetic compatibility (EMC) General. Guide to the assessment of measurement uncertainty |
| 16/30333694 DC : 0 | BS EN ISO 14253-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS |
| UNE-IEC 60050-351:2010 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
| OIML R 116 : 2006 | INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETERS FOR THE MEASUREMENT OF METAL POLLUTANTS IN WATER |
| DIN EN ISO 13160:2016-03 | WATER QUALITY - STRONTIUM 90 AND STRONTIUM 89 - TEST METHODS USING LIQUID SCINTILLATION COUNTING OR PROPORTIONAL COUNTING (ISO 13160:2012) |
| BS EN 16682:2017 | Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| BS EN ISO 8041-1:2017 | Human response to vibration. Measuring instrumentation General purpose vibration meters |
| ISO 12749-3:2015 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 3: Nuclear fuel cycle |
| 14/30265645 DC : 0 | BS ISO 7503-3 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND EVALUATION OF SURFACE CONTAMINATION - PART 3: APPARATUS CALIBRATION |
| 13/30292662 DC : 0 | BS EN 61260-2 ED.1.0 - ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN EVALUATION TESTS |
| BS ISO 17123-8:2015 | Optics and optical instruments. Field procedures for testing geodetic and surveying instruments GNSS field measurement systems in real-time kinematic (RTK) |
| BS ISO 2314:2009 | Gas turbines. Acceptance tests |
| 12/30262689 DC : 0 | BS ISO 16610-60 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 60: LINEAR AREAL FILTERS - BASIC CONCEPTS |
| DIN EN ISO 16610-31 E : 2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| BS EN ISO 15378:2017 | Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) |
| 09/30191982 DC : 0 | BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
| 17/30345263 DC : 0 | BS EN ISO 6974-3 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 3: PRECISION AND BIAS |
| ASTM D 6808 : 2002 : R2012 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| 16/30327521 DC : 0 | BS EN ISO 11554 - LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS |
| OIML G 6 : 1991 | THE UNIFICATION OF HARDNESS MEASUREMENT |
| ISO 3898:2013 | Bases for design of structures — Names and symbols of physical quantities and generic quantities |
| CEI EN 62321-1 : 2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 1: INTRODUCTION AND OVERVIEW |
| BS EN 62522:2014 | Calibration of tuneable laser sources |
| PD ISO/TR 12888:2011 | Selected illustrations of gauge repeatability and reproducibility studies |
| DD ISO/PAS 12868:2009 | Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems |
| 13/30264514 DC : 0 | BS ISO/ASTM 52701 - GUIDE FOR PERFORMANCE CHARACTERIZATION OF DOSIMETERS AND DOSIMETRY SYSTEMS FOR USE IN RADIATION PROCESSING |
| DIN EN ISO 16610-22 E : 2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 22: LINEAR PROFILE FILTERS: SPLINE FILTERS (ISO 16610-22:2015) |
| BS EN ISO 16610-85:2013 | Geometrical product specifications (GPS). Filtration Morphological areal filters: Segmentation |
| 09/30205556 DC : 0 | BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| 08/30157876 DC : 0 | |
| BS ISO 80000-1 : 2009 | QUANTITIES AND UNITS - PART 1: GENERAL |
| BS EN 12405-2:2012 | Gas meters. Conversion devices Energy conversion |
| BS EN 16440-1:2015 | Testing methodologies of refrigerating devices for insulated means of transport Mechanical cooling device with forced air circulation evaporator with or without heating device |
| BS EN 61788-18:2013 | Superconductivity Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors |
| I.S. EN ISO 16610-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015) |
| BS EN ISO 14912:2006 | Gas analysis. Conversion of gas mixture composition data |
| 11/30217467 DC : 0 | BS ISO 17123-6 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 6: ROTATING LASERS |
| BS ISO 5129 : 2001 | ACOUSTICS - MEASUREMENT OF SOUND PRESSURE LEVELS IN THE INTERIOR OF AIRCRAFT DURING FLIGHT |
| BS EN 80000-14:2009 | Quantities and units Telebiometrics related to human physiology |
| 12/30263896 DC : 0 | BS EN 16457 - CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| 14/30287632 DC : 0 | BS EN ISO 12836:2012/AMD 1 - DENTISTRY - DIGITIZING DEVICES FOR CAD/CAM SYSTEMS FOR INDIRECT DENTAL RESTORATIONS - TEST METHODS FOR ASSESSING ACCURACY |
| BS EN 15964:2011 | Breath alcohol test devices other than single use devices. Requirements and test methods |
| DIN EN 16211:2015-09 | Ventilation for buildings - Measurement of air flows on site - Methods |
| BS ISO 230-1:2012 | Test code for machine tools Geometric accuracy of machines operating under no-load or quasi-static conditions |
| BS ISO/IEC 18014-4:2015 | Information technology. Security techniques. Time-stamping services Traceability of time sources |
| DIN EN 12405-3 E : 2016 | GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
| OIML B 18 : 2017 | FRAMEWORK FOR THE OIML CERTIFICATION SYSTEM (OIML-CS) |
| BS IEC 61786-2:2014 | Measurement of DC magnetic, AC magnetic and AC electric fields from 1 Hz to 100 kHz with regard to exposure of human beings Basic standard for measurements |
| 10/30217545 DC : 0 | BS EN 61674 - MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| DIN ISO 17123-1 E : 2017 | OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 1: THEORY (ISO 17123-1:2014) |
| 10/30216004 DC : 0 | BS EN 60050-351 - INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 351: CONTROL TECHNOLOGY |
| BS ISO 29661 : 2012 | REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS |
| BS EN ISO 12999-1:2014 | Acoustics. Determination and application of measurement uncertainties in building acoustics Sound insulation |
| UNE-IEC 60050-112:2012 | International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units |
| IEEE 15939-2008 | IEEE Standard Adoption of ISO/IEC 15939:2007--Systems and Software Engineering--Measurement Process |
| 14/30274840 DC : 0 | BS ISO 7503-1 - MEASUREMENT OF RADIOACTIVITY - MEASUREMENT AND EVALUATION OF SURFACE CONTAMINATION - PART 1: GENERAL PRINCIPLES |
| CEI EN 80601-2-59 : 2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-59: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SCREENING THERMOGRAPHS FOR HUMAN FEBRILE TEMPERATURE SCREENING |
| BS EN 1911:2010 | Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method |
| BS ISO 15796 : 2005 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| I.S. EN 16211:2015 | VENTILATION FOR BUILDINGS - MEASUREMENT OF AIR FLOWS ON SITE - METHODS |
| NF EN ISO 25178-701 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| 17/30347905 DC : 0 | BS ISO 11929-1 - DETERMINATION OF THE CHARACTERISTIC LIMITS (DECISION THRESHOLD, DETECTION LIMIT AND LIMITS OF THE COVERAGE INTERVAL) FOR MEASUREMENTS OF IONIZING RADIATION - FUNDAMENTALS AND APPLICATION - PART 1: ELEMENTARY APPLICATIONS |
| 08/30134763 DC : DRAFT JUNE 2008 | BS ISO/IEC 27004 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT - MEASUREMENT |
| ISO 3567:2011 | Vacuum gauges — Calibration by direct comparison with a reference gauge |
| I.S. EN 61788-18:2013 | SUPERCONDUCTIVITY - PART 18: MECHANICAL PROPERTIES MEASUREMENT - ROOM TEMPERATURE TENSILE TEST OF AG- AND/OR AG ALLOY-SHEATHED BI-2223 AND BI-2212 COMPOSITE SUPERCONDUCTORS |
| BS EN 61672-1:2013 | Electroacoustics. Sound level meters Specifications |
| BS ISO 6707-1:2017 | Buildings and civil engineering works. Vocabulary General terms |
| CSA Z11135-1 :2009 | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO/IEC 19796-3:2009 | Information technology. Learning, education and training. Quality management, assurances and metrics Reference methods and metrics |
| CSA CISPR 16-2-3 : 2012 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
| I.S. EN ISO 16948:2015 | SOLID BIOFUELS - DETERMINATION OF TOTAL CONTENT OF CARBON, HYDROGEN AND NITROGEN (ISO 16948:2015) |
| 16/30312185 DC : 0 | BS EN ISO/IEC 17011 - CONFORMITY ASSESSMENT - REQUIREMENTS FOR ACCREDITATION BODIES ACCREDITING CONFORMITY ASSESSMENT BODIES |
| UNE-EN 15964:2012 | Breath alcohol test devices other than single use devices - Requirements and test methods |
| ANSI/AAMI/ISO 20857:2010(R2015) | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| DIN EN ISO 11240:2013-03 | Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) |
| UNI CEI EN ISO 80000-1 : 2013 | QUANTITIES AND UNITS - PART 1: GENERAL |
| UNI EN ISO 20857 : 2013 | STERILIZATION OF HEALTH CARE PRODUCTS - DRY HEAT - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| NF EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| NF EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| CSA Z11135-1 : 2009 : FR | STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| DIN EN ISO 16610-61 E : 2016 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - FILTRATION - PART 61: LINEAR AREAL FILTERS: GAUSSIAN FILTERS (ISO 16610-61:2015) |
| DIN EN ISO 14253-3:2011-10 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| 17/30310826 DC : 0 | BS EN ISO 19115-2 - GEOGRAPHIC INFORMATION - METADATA - PART 2: EXTENSIONS FOR ACQUISITION AND PROCESSING |
| BS ISO/IEC/IEEE 15939:2017 | Systems and software engineering. Measurement process |
| DIN EN ISO 20857:2013-08 | Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) |
| DIN EN 16457:2014-07 | CHARACTERIZATION OF WASTE - FRAMEWORK FOR THE PREPARATION AND APPLICATION OF A TESTING PROGRAMME - OBJECTIVES, PLANNING AND REPORT |
| BIS IS/ISO 9000 : 2015 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY |
| DIN EN ISO 16610-71:2014-12 | Geometrical product specifications (GPS) - Filtration - Part 71: Robust areal filters: Gaussian regression filters (ISO 16610-71:2014) |
| UNE-EN ISO 15378:2016 | Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015) |
| I.S. EN 55016-1-2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-2: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - COUPLING DEVICES FOR CONDUCTED DISTURBANCE MEASUREMENTS |
| BS EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity. Radiated disturbance measurements |
| ISO 27893:2011 | Vacuum technology — Vacuum gauges — Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge |
| BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
| CISPR 16-1-5:2014+AMD1:2016 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
| I.S. EN ISO 14253-1:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 1: DECISION RULES FOR VERIFYING CONFORMITY OR NONCONFORMITY WITH SPECIFICATIONS (ISO 14253-1:2017) |
| UNI EN ISO 11771 : 2011 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| UNE-EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| CEI EN 61788-8 : 2011 | SUPERCONDUCTIVITY - PART 8: AC LOSS MEASUREMENTS - TOTAL AC LOSS MEASUREMENT OF ROUND SUPERCONDUCTING WIRES EXPOSED TO A TRANSVERSE ALTERNATING MAGNETIC FIELD AT LIQUID HELIUM TEMPERATURE BY A PICKUP COIL METHOD |
| I.S. EN 61788-13:2012 | SUPERCONDUCTIVITY - PART 13: AC LOSS MEASUREMENTS - MAGNETOMETER METHODS FOR HYSTERESIS LOSS IN SUPERCONDUCTING MULTIFILAMENTARY COMPOSITES (IEC 61788-13:2012 (EQV)) |
| BS EN ISO 20785-1:2017 | Dosimetry for exposures to cosmic radiation in civilian aircraft Conceptual basis for measurements |
| I.S. EN ISO 13225:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012) |
| UNE-EN ISO 1683:2016 | Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015) |
| NF EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| I.S. EN ISO 11135:2014 | STERILIZATION OF HEALTH-CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11135:2014) |
| UNE-EN ISO 25178-601:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| BS EN 55016-4-2 : 2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| I.S. EN 60544-1:2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY (IEC 60544-1:2013 (EQV)) |
| I.S. EN ISO 14253-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| IEC 61588:2009 | Precision clock synchronization protocol for networked measurement and control systems |
| BS EN ISO 9696:2017 | Water quality. Gross alpha activity. Test method using thick source |
| EN ISO 15530-3:2011 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) |
| BS EN 55016-1-2:2014 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus. Coupling devices for conducted disturbance measurements |
| ISO 13163:2013 | Water quality Lead-210 Test method using liquid scintillation counting |
| CEI UNI EN ISO 17034 : 1ED 2018 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| CEI EN 61672-3 : 2014 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 3: PERIODIC TESTS |
| I.S. EN 61788-5:2013 | SUPERCONDUCTIVITY - PART 5: MATRIX TO SUPERCONDUCTOR VOLUME RATIO MEASUREMENT - COPPER TO SUPERCONDUCTOR VOLUME RATIO OF CU/NB-TI COMPOSITE SUPERCONDUCTING WIRES (IEC 61788-5:2013 (EQV)) |
| NF EN ISO 4787 : 2011 | LABORATORY GLASSWARE - VOLUMETRIC INSTRUMENTS - METHODS FOR TESTING OF CAPACITY AND FOR USE |
| ISO/TS 14101:2012 | Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method |
| I.S. EN ISO 16610-31:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016) |
| ISO/TR 14294:2011 | Workplace atmospheres Measurement of dermal exposure Principles and methods |
| ISO 13843:2017 | Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods |
| ISO 16063-16:2014 | Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation |
| DIN EN ISO 15530-3:2012-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| I.S. EN 62129-2:2011 | CALIBRATION OF WAVELENGTH/OPTICAL FREQUENCY MEASUREMENT INSTRUMENTS - PART 2: MICHELSON INTERFEROMETER SINGLE WAVELENGTH METERS |
| I.S. EN ISO 25178-604:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| I.S. EN ISO 17450-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 1: MODEL FOR GEOMETRICAL SPECIFICATION AND VERIFICATION (ISO 17450-1:2011) |
| I.S. EN 16682:2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| ISO 15337:2009 | Ambient air Gas phase titration Calibration of analysers for ozone |
| BS ISO 17034 : 2016 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIAL PRODUCERS |
| UNE-EN ISO 4064-1:2015 | Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) |
| ISO 2314:2009 | Gas turbines — Acceptance tests |
| UNE-EN ISO 14253-1:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 1: Decision rules for proving conformity or nonconformity with specification (ISO 14253-1:2013) |
| EN ISO 29661:2017 | Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012, including Amd 1:2015) |
| I.S. EN ISO 25178-71:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 71: SOFTWARE MEASUREMENT STANDARDS (ISO 25178-1:2017) |
| PREN 14789 : DRAFT 2014 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| BS EN ISO 11607-1 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 1: REQUIREMENTS FOR MATERIALS, STERILE BARRIER SYSTEMS AND PACKAGING SYSTEMS |
| ISO/IEC 19796-3:2009 | Information technology — Learning, education and training — Quality management, assurance and metrics — Part 3: Reference methods and metrics |
| CEI EN 61674 : 2014 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AND/OR SEMI-CONDUCTOR DETECTORS AS USED IN X-RAY DIAGNOSTIC IMAGING |
| DIN EN ISO 14253-2:2011-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION (ISO 14253-2:2011) |
| I.S. EN 61788-8:2010 | SUPERCONDUCTIVITY - PART 8: AC LOSS MEASUREMENTS - TOTAL AC LOSS MEASUREMENT OF ROUND SUPERCONDUCTING WIRES EXPOSED TO A TRANSVERSE ALTERNATING MAGNETIC FIELD AT LIQUID HELIUM TEMPERATURE BY A PICKUP COIL METHOD |
| BS EN ISO/IEC 17011:2017 | Conformity assessment. Requirements for accreditation bodies accrediting conformity assessment bodies |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| UNE-EN ISO 204:2010 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
| UNE-EN ISO 11704:2016 | Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method (ISO 11704:2010) |
| UNI EN ISO 19115-2 : 2010 | GEOGRAPHIC INFORMATION - METADATA - PART 2: EXTENSIONS FOR IMAGERY AND GRIDDED DATA |
| I.S. EN ISO 25178-603:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| EN IEC 62828-1:2018 | Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters |
| ISO 21438-2:2009 | Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) |
| UNI EN ISO 14253-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| OIML R 132 : 2001 | ALANINE EPR DOSIMETRY SYSTEMS FOR IONIZING RADIATION PROCESSING OF MATERIALS AND PRODUCTS |
| ASTM E 3125 : 2017 | Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range |
| OIML R 50-2 : 2014 | CONTINUOUS TOTALIZING AUTOMATIC WEIGHING INSTRUMENTS (BELT WEIGHERS) - PART 2: TEST PROCEDURES |
| ASTM D 6808 : 2002 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| EN IEC 63041-2:2018 | Piezoelectric Sensors - Part 2: Chemical and Biochemical Sensors |
| ANSI/ASA S1.4 PART 3:2014 | Electroacoustics - Sound Level Meters - Part 3: Periodic Tests (a nationally adopted international standard) |
| UNE-EN ISO 3611:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| EN ISO 25178-71:2017 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO/TS 81346-3:2012 | Industrial systems, installations and equipment and industrial products Structuring principles and reference designations Part 3: Application rules for a reference designation system |
| ISO 17733:2015 | Workplace air Determination of mercury and inorganic mercury compounds Method by cold-vapour atomic absorption spectrometry or atomic fluorescence spectrometry |
| BS EN ISO 21572:2013 | Foodstuffs. Molecular biomarker analysis. Protein-based methods |
| ISO 230-2:2014 | Test code for machine tools — Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
| ISO/TR 18196:2016 | Nanotechnologies — Measurement technique matrix for the characterization of nano-objects |
| ISO 28057:2014 | Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy |
| ISO/IEC 15944-9:2015 | Information technology — Business operational view — Part 9: Business transaction traceability framework for commitment exchange |
| IEC TS 62129-3:2014 | Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters using optical frequency combs |
| ISO 16331-1:2017 | Optics and optical instruments — Laboratory procedures for testing surveying and construction instruments — Part 1: Performance of handheld laser distance meters |
| ISO 16063-21:2003 | Methods for the calibration of vibration and shock transducers — Part 21: Vibration calibration by comparison to a reference transducer |
| ISO/ASTM 52701:2013 | Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 12749-2:2013 | Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection |
| ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
| ISO 20785-2:2011 | Dosimetry for exposures to cosmic radiation in civilian aircraft Part 2: Characterization of instrument response |
| ISO 16638-1:2015 | Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds |
| EN ISO 80601-2-61:2011 | Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011) |
| I.S. EN 80601-2-59:2009 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-59: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF SCREENING THERMOGRAPHS FOR HUMAN FEBRILE TEMPERATURE SCREENING |
| IWA 15:2015 | Specification and method for the determination of performance of automated liquid handling systems |
| S.R. CWA 16060:2009 | ENVIRONMENTAL TECHNOLOGY VERIFICATION - AIR EMISSION ABATEMENT TECHNOLOGIES |
| UNI EN ISO 21572 : 2013 | FOODSTUFFS - MOLECULAR BIOMARKER ANALYSIS - PROTEIN-BASED METHODS |
| ISO 4545-1:2017 | Metallic materials — Knoop hardness test — Part 1: Test method |
| CISPR TR 18-1 REDLINE : 3ED 2017 | RADIO INTERFERENCE CHARACTERISTICS OF OVERHEAD POWER LINES AND HIGH-VOLTAGE EQUIPMENT - PART 1: DESCRIPTION OF PHENOMENA |
| I.S. EN ISO 25178-701:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN ISO 14253-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 2: GUIDANCE FOR THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| I.S. EN 61069-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
| I.S. EN 12405-1:2005 | GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
| I.S. EN 15842:2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| I.S. EN 62209-2:2010 | HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODYMOUNTED WIRELESS COMMUNICATION DEVICES - HUMAN MODELS, INSTRUMENTATION, AND PROCEDURES - PART 2: PROCEDURE TO DETERMINE THE SPECIFIC ABSORPTION RATE (SAR) FOR WIRELESS COMMUNICATION DEVICES USED IN CLOSE PROXIMITY TO THE HUMAN BODY (FREQUENCY RANGE OF 30 MHZ TO 6 GHZ) |
| ISO/TS 27893:2009 | Vacuum technology Vacuum gauges Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge |
| I.S. EN 60398:2015 | INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - GENERAL PERFORMANCE TEST METHODS |
| IEC 60050-112:2010 | International Electrotechnical Vocabulary (IEV) - Part 112: Quantities and units |
| I.S. EN 61746-2:2011 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
| CISPR TR 16-4-1:2009 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests |
| I.S. EN 55016-2-1:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-1: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - CONDUCTED DISTURBANCE MEASUREMENTS |
| IEC 60860:2014 | Radiation protection instrumentation - Warning equipment for criticality accidents |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| I.S. EN 60731:2012 | MEDICAL ELECTRICAL EQUIPMENT - DOSIMETERS WITH IONIZATION CHAMBERS AS USED IN RADIOTHERAPY (IEC 60731:2011 (EQV)) |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| EN 61746-1:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 1: OTDR FOR SINGLE-MODE FIBRES (IEC 61746-1:2009) |
| BS EN ISO 11607-1:2020 | Packaging for terminally sterilized medical devices Requirements for materials, sterile barrier systems and packaging systems |
| EN 61746-2:2011/AC:2014 | CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES |
| EN 61260-2:2016/A1:2017 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS - PART 2: PATTERN-EVALUATION TESTS (IEC 61260-2:2016/A1:2017) |
| DIN EN ISO 9000:2015-11 | QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015) |
| DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| DIN EN ISO 2813:2015-02 | PAINTS AND VARNISHES - DETERMINATION OF GLOSS VALUE AT 20 DEGREES, 60 DEGREES AND 85 DEGREES (ISO 2813:2014) |
| DIN EN 15058 E : 2006 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF CARBON MONOXIDE - STANDARD REFERENCE METHOD: NON-DISPERSIVE INFRARED SPECTROMETRY |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN 14791 E : 2006 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF MASS CONCENTRATION OF SULPHUR OXIDES - STANDARD REFERENCE METHOD |
| DIN EN 14789 E : 2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF VOLUME CONCENTRATION OF OXYGEN - STANDARD REFERENCE METHOD: PARAMAGNETISM |
| BS EN 15058:2017 | Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry |
| ISO 139:2005 | Textiles Standard atmospheres for conditioning and testing |
| ISO 16610-1:2015 | Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts |
| ISO 25178-603:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| ISO 16610-21:2011 | Geometrical product specifications (GPS) — Filtration — Part 21: Linear profile filters: Gaussian filters |
| IEC 61788-4:2016 | Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb<sub>3</sub>Sn composite superconductors |
| ISO 9906:2012 | Rotodynamic pumps — Hydraulic performance acceptance tests — Grades 1, 2 and 3 |
| IEC 61788-13:2012 | Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites |
| ISO 5436-2:2012 | Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards |
| ISO 10882-1:2011 | Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles |
| ISO 16948:2015 | Solid biofuels Determination of total content of carbon, hydrogen and nitrogen |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO 26142:2010 | Hydrogen detection apparatus Stationary applications |
| ISO 16610-20:2015 | Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts |
| IEC 61377:2016 | Railway applications - Rolling stock - Combined test method for traction systems |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO/TS 16491:2012 | Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests |
| ISO 14253-5:2015 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments |
| ISO 25178-605:2014 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments |
| ISO 10360-10:2016 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring systems (CMS) Part 10: Laser trackers for measuring point-to-point distances |
| BS EN ISO 6974-2:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations |
| BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
| ISO 10360-9:2013 | Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 9: CMMs with multiple probing systems |
| ISO 8598-1:2014 | Optics and optical instruments — Focimeters — Part 1: General purpose instruments |
| IEC 61331-2:2014 | Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates |
| ISO 9493:2010 | Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics |
| ISO 6976:2016 | Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition |
| ISO 4064-1:2014 | Water meters for cold potable water and hot water Part 1: Metrological and technical requirements |
| BS EN ISO 8655-1:2002 | Piston-operated volumetric apparatus Terminology, general requirements and user recommendations |
| UNE-EN ISO/IEC 17011:2017 | Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC 17011:2017) |
| EN 61788-4:2016 | Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors |
| UNE-EN 14626:2013 | Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy |
| IEC 61746-1:2009 | Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single mode fibres |
| BS EN 1026:2016 | Windows and doors. Air permeability. Test method |
| ISO 16610-30:2015 | Geometrical product specifications (GPS) Filtration Part 30: Robust profile filters: Basic concepts |
| ISO 21572:2013 | Foodstuffs Molecular biomarker analysis Protein-based methods |
| UNE-EN 14792:2017 | Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence |
| ISO 10360-5:2010 | Geometrical product specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 5: CMMs using single and multiple stylus contacting probing systems |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO 15796:2005 | Gas analysis — Investigation and treatment of analytical bias |
| ISO 1683:2015 | Acoustics Preferred reference values for acoustical and vibratory levels |
| ISO 12999-1:2014 | Acoustics Determination and application of measurement uncertainties in building acoustics Part 1: Sound insulation |
| UNE-EN ISO 10723:2013 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| BS EN 14662-3:2015 | Ambient air. Standard method for the measurement of benzene concentrations Automated pumped sampling with in situ gas chromatography |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| UNE-EN 932-5:2012 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| IEC 60398:2015 | Installations for electroheating and electromagnetic processing - General performance test methods |
| IEC 61676:2002+AMD1:2008 CSV | Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology |
| ISO 16610-60:2015 | Geometrical product specification (GPS) Filtration Part 60: Linear areal filters Basic concepts |
| IEC 61788-11:2011 | Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors |
| ISO 14253-3:2011 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| UNE-EN 14625:2013 | Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| ISO 17994:2014 | Water quality — Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods |
| IEC 62585:2012 | Electroacoustics - Methods to determine corrections to obtain the free-field response of a sound level meter |
| IEC 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| ISO 10723:2012 | Natural gas — Performance evaluation for analytical systems |
| IEC 61788-12:2013 | Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb<sub>3</sub>Sn composite superconducting wires |
| ISO 16610-22:2015 | Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters |
| BS EN ISO 463:2006 | Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| ISO 15212-1:1998 | Oscillation-type density meters Part 1: Laboratory instruments |
| ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| BS EN 14625:2012 | Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry |
| ISO 14912:2003 | Gas analysis — Conversion of gas mixture composition data |
| ISO 25178-604:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| ISO 25178-1:2016 | Geometrical product specifications (GPS) Surface texture: Areal Part 1: Indication of surface texture |
| ISO 13385-1:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
| IEC 62129-1:2016 | Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers |
| ISO 5667-14:2014 | Water quality Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling |
| ISO 13102:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| ISO 11771:2010 | Air quality Determination of time-averaged mass emissions and emission factors General approach |
| IEC 62475:2010 | High-current test techniques - Definitions and requirements for test currents and measuring systems |
| IEC 61207-1:2010 | Expression of performance of gas analyzers - Part 1: General |
| ISO 13803:2014 | Paints and varnishes Determination of haze on paint films at 20 |
| IEC 62419:2008 | Control technology - Rules for the designation of measuring instruments |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| UNE-EN 16242:2014 | Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| ISO 17450-1:2011 | Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| ISO 13160:2012 | Water quality Strontium 90 and strontium 89 Test methods using liquid scintillation counting or proportional counting |
| BS EN ISO 10360-5:2010 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) CMMs using single and multiple stylus contacting probing systems |
| ISO 4064-5:2014 | Water meters for cold potable water and hot water — Part 5: Installation requirements |
| UNE-EN 14211:2013 | Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence |
| UNE-EN ISO 13385-1:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| ISO 16610-28:2016 | Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects |
| UNE-EN ISO 4064-4:2015 | Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2014) |
| ISO 14532:2014 | Natural gas — Vocabulary |
| BS EN 14154-1 : 2005 | WATER METERS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| ISO 10360-3:2000 | Geometrical Product Specifications (GPS) Acceptance and reverification tests for coordinate measuring machines (CMM) Part 3: CMMs with the axis of a rotary table as the fourth axis |
| ISO 13385-2:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics |
| IEC 61788-16:2013 | Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies |
| UNE-EN 14212:2013 | Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence |
| ISO 16610-85:2013 | Geometrical product specifications (GPS) — Filtration — Part 85: Morphological areal filters: Segmentation |
| ISO 25178-6:2010 | Geometrical product specifications (GPS) Surface texture: Areal Part |