ISO 75-1:2013
|
Plastics Determination of temperature of deflection under load Part 1: General test method
|
EN ISO 62:2008
|
Plastics - Determination of water absorption (ISO 62:2008)
|
PREN 13160-2 : DRAFT 2014
|
LEAK DETECTION SYSTEMS - PART 2: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PRESSURE AND VACUUM SYSTEMS
|
EN 13121-1:2003
|
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
|
EN 10300:2005
|
Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating
|
PREN 13160-1 : DRAFT 2014
|
LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES
|
EN ISO 75-3:2004/AC:2006
|
Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics (ISO 75-3:2004)
|
EN 228:2012+A1:2017
|
Automotive fuels - Unleaded petrol - Requirements and test methods
|
EN 1107-2 : 2001
|
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
|
EN 1849-2:2009
|
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
|
EN 495-5:2013
|
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
|
PREN 13160-3 : DRAFT 2014
|
LEAK DETECTION SYSTEMS - PART 3: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR LIQUID SYSTEMS FOR TANKS
|
EN ISO 75-1:2013
|
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
|
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
|
EN ISO 604 : 2003
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002)
|
EN ISO 24345 : 2012
|
RESILIENT FLOOR COVERINGS - DETERMINATION OF PEEL RESISTANCE (ISO 24345:2006)
|
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
|
EN ISO 179-1:2010
|
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
|
EN 13121-2:2003
|
GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance
|
ISO 75-2:2013
|
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
|
EN ISO 75-2:2013
|
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
|
ISO 2528:2017
|
Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
|
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
EN 14879-4:2007
|
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
|
ISO 604:2002
|
Plastics — Determination of compressive properties
|
ISO 179-1:2010
|
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
|
ISO 62:2008
|
Plastics Determination of water absorption
|
ISO 6133:2015
|
Rubber and plastics Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
|
ISO 75-3:2004
|
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
|
EN ISO 179-2:1999/A1:2012
|
PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - INSTRUMENTED IMPACT TEST (ISO 179-2:1997/AMD 1:2011)
|
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
|
ISO 178:2010
|
Plastics Determination of flexural properties
|
EN ISO 527-3:1995/AC:2002
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
|
PREN 13160-4 : DRAFT 2014
|
LEAK DETECTION SYSTEMS - PART 4: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR SENSOR BASED LEAK DETECTION SYSTEMS
|
ISO 24345:2006
|
Resilient floor coverings Determination of peel resistance
|
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
|
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles
|