EN 932-5:2012/AC:2014
Current
The latest, up-to-date edition.
TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
05-28-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Common equipment
5 Calibration and checking
6 Reagents
Annex A (normative) - Method for the
performance check of sieves
Annex B (normative) - Procedure for the
manual checking of perforated
plate test sieve openings
Annex C (informative) - Balance recommendation
for various standard test methods
Bibliography
Describes general requirements for common equipment, calibration and checking procedures and reagents for the testing of the properties of aggregates.
Committee |
TC 154
|
DevelopmentNote |
Supersedes PREN 932-5. (03/2012)
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
PN EN 932-5 : 2012 AC 2014 | Identical |
SN 670901-5 : 2015 | Identical |
DIN EN 932-5:2012-05 | Identical |
NF EN 932-5 : 2012 | Identical |
SN EN 932-5:2013 | Identical |
UNI EN 932-5 : 2012 | Identical |
NS EN 932-5 : 2012 AC 2014 | Identical |
I.S. EN 932-5:2012 | Identical |
UNE-EN 932-5:2012 | Identical |
NBN EN 932-5 : 2012 | Identical |
BS EN 932-5:2012 | Identical |
NEN EN 932-5 : 2012 C1 2014 | Identical |
SN EN 932-5+AC:2015 | Identical |
DIN EN 1367-8 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
BS EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates Determination of compressibility and confined compressive strength of lightweight aggregates |
BS EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing of Lightweight aggregates |
07/30165780 DC : DRAFT AUG 2007 | BS EN 1097-5 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
07/30166977 DC : DRAFT AUG 2007 | BS EN 1744-1 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
PREN 13286-54 : DRAFT 2011 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES |
BS EN 933-11:2009 | Tests for geometrical properties of aggregates Classification test for the constituents of coarse recycled aggregate |
10/30218648 DC : DRAFT JUNE 2010 | BS EN 1744-7 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA AGGREGATE) |
08/30185875 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
DIN EN 1744-7:2012-05 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
11/30241878 DC : 0 | BS EN 933-6 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
I.S. EN 16236:2013 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
06/30153220 DC : 0 | BS EN 1367-6 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6 - RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT |
BS EN 1744-7:2012 | Tests for chemical properties of aggregates Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
UNE-EN 1367-8:2015 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
I.S. EN 1744-7:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH AGGREGATE (MIBA AGGREGATE) |
08/30188887 DC : 0 | BS EN 933-9 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
I.S. EN 1367-6:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
I.S. EN 1744-8:2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
UNI EN 1744-7 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF LOSS OF IGNITION OF MUNICIPAL INCINERATOR BOTTOM ASH - AGGREGATE (MIBA AGGREGATE) |
PREN 13383-2 : DRAFT 2017 | ARMOURSTONE - PART 2: TEST METHODS |
DIN EN 16236:2015-07 (Draft) | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
EN 13383-1:2002/AC:2004 | ARMOURSTONE - PART 1: SPECIFICATION |
DIN EN 1367-2:2010-02 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
DIN EN 933-8:2015-07 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
BS EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates Determination of the voids of dry compacted filler |
BS EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear by abrasion from studded tyres. Nordic test |
BS EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates Determination of the polished stone value |
BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
UNE-EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
BS EN 1744-6:2006 | Tests for chemical properties of aggregates Determination of the influence of recycled aggregate extract on the initial setting time of cement |
BS EN 13450:2013 | Aggregates for railway ballast |
BS EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates Determination of the resistance to wear (micro-Deval) |
BS EN 13242:2013 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
BS EN 1367-3:2001 | Tests for thermal and weathering properties of aggregates Boiling test for Sonnenbrand basalt |
BS EN 932-1:1997 | Tests for general properties of aggregates Methods for sampling |
BS EN 13043:2013 | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
I.S. EN 1097-1:2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
I.S. EN 1367-2:2009 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
I.S. EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test |
EN 1097-4:2008 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
EN 13055-1:2002/AC:2004 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
EN 13450:2002/AC:2004 | AGGREGATES FOR RAILWAY BALLAST |
EN 12620:2002+A1:2008 | Aggregates for concrete |
EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
CEN/TS 13286-54:2014 | Unbound and hydraulically bound mixtures - Part 54: Test method for the determination of frost susceptibility - Resistance to freezing and thawing of hydraulically bound mixtures |
EN 13055-2:2004 | Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
EN 13383-2:2013 | Armourstone - Part 2: Test methods |
EN 13139:2002/AC:2004 | AGGREGATES FOR MORTAR |
EN 13043:2002/AC:2004 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
UNI EN 16236 : 2013 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
04/30077125 DC : 0 | EN 933-11 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATES |
I.S. EN 13055-2:2004 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
PREN 16236 : DRAFT 2015 | EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
UNI EN 933-11 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
11/30246470 DC : 0 | BS EN 13286-54 - UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES |
DIN EN 1367-7:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
04/30088151 DC : DRAFT FEB 2004 | EN 1744-6 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
00/105661 DC : DRAFT AUG 2000 | BS EN 1744-4 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
16/30320756 DC : 0 | BS EN 1097-8 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
12/30256925 DC : 0 | BS EN 13055 - LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
09/30195711 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
PD CEN/TS 13286-54:2014 | Unbound and hydraulically bound mixtures Test method for the determination of frost susceptibility. Resistance to freezing and thawing of hydraulically bound mixtures |
09/30195708 DC : 0 | BS EN 13383-1 - ARMOURSTONE - PART 1: SPECIFICATION |
DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
UNI EN 1367-7 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
I.S. EN 1097-11:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
UNI CEN/TS 13286-54 : 2014 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES |
NF EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
DIN EN 1367-1:2007-06 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
DIN EN 933-6:2014-07 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
DIN EN 933-9:2013-07 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test (includes Amendment A1:2013) |
DIN EN 1367-4:2008-06 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
DIN EN 1367-5:2011-04 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
BS EN 933-9 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
UNE-EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
BS EN 13055-2:2004 | Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
BS EN 13286-1:2003 | Unbound and hydraulically bound mixtures Test methods for laboratory reference density and water content. Introduction, general requirements and sampling |
BS EN 933-3:2012 | Tests for geometrical properties of aggregates Determination of particle shape. Flakiness index |
BS EN 933-1:2012 | Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method |
I.S. EN 933-10:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
I.S. EN 933-6:2014 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
I.S. EN 1367-1:2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
I.S. EN 1097-5:2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
I.S. EN 13179-1:2013 | TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
I.S. EN 13450:2013 | AGGREGATES FOR RAILWAY BALLAST |
I.S. EN 1097-7:2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
I.S. EN 933-3:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
I.S. EN 933-1:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
I.S. EN 1097-6:2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
I.S. EN 933-8:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
I.S. EN 933-9:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
I.S. EN 1097-4:2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
I.S. EN 933-4:2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
I.S. EN 1367-4:2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
I.S. EN 1097-9:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
I.S. EN 1367-5:2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
DIN EN 933-6:2002-02 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
I.S. EN 1744-1:2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
ONORM EN 1097-7 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
UNE-EN 1744-7:2012 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
DIN EN 1367-8:2014-07 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
DIN EN 1097-11 E : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
BS EN 13055:2016 | Lightweight aggregates |
DIN EN 1097-11:2013-11 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
DIN EN 1744-8:2012-11 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
08/30185872 DC : 0 | BS EN 933-10 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
I.S. EN 13055-1:2002 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
07/30166974 DC : DRAFT AUG 2007 | BS EN 1367-2 - TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULPHATE TEST |
UNI EN 1097-11 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 11: DETERMINATION OF COMPRESSIBILITY AND CONFINED COMPRESSIVE STRENGTH OF LIGHTWEIGHT AGGREGATES |
UNI EN 1367-8 : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
06/30153237 DC : DRAFT JULY 2006 | BS ISO 16003 - COMPONENTS FOR GASEOUS MEDIA AND FIRE EXTINGUISHING SYSTEMS - REQUIREMENTS AND TEST METHODS - CONTAINER VALVE ASSEMBLIES AND THEIR ACTUATORS, SELECTOR VALVES AND THEIR ACTUATORS, NOZZLES, FLEXIBLE CONNECTORS, AND CHECK VALVES AND NON-RETURN VALVES |
10/30218642 DC : DRAFT JUNE 2010 | BS EN 1097-6 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
PREN 933-9 : DRAFT 2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
BS EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
PREN 933-10 : DRAFT 2008 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
DIN EN 1744-4:2005-10 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
DIN EN 1744-1:2013-03 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
DIN EN 1744-5:2006-12 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
DIN EN 933-3:2012-04 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
DIN EN 933-1:2012-03 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
DIN EN 1744-6:2006-12 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
DIN EN 1097-10:2014-09 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
DIN EN 1097-4:2008-06 | Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler |
DIN EN 1097-1:2011-04 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
DIN EN 1097-8:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
DIN EN 933-10:2009-10 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
DIN EN 1097-5:2008-06 | Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven |
DIN EN 1097-6:2013-09 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
EN 1097-8:2009 | Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value |
BS EN 1097-5:2008 | Tests for mechanical and physical properties of aggregates Determination of the water content by drying in a ventilated oven |
BS EN 13383-2:2013 | Armourstone Test methods |
BS EN 933-6:2014 | Tests for geometrical properties of aggregates Assessment of surface characteristics. Flow coefficient of aggregates |
UNI EN 1097-7 : 2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
UNI EN 1744-1 : 2013 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
UNI EN 933-3 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF PARTICLE SHAPE - FLAKINESS INDEX |
UNI EN 1367-2 : 2010 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 2: MAGNESIUM SULFATE TEST |
UNI EN 1367-1 : 2007 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING |
UNI EN 933-6 : 2014 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
UNI EN 13139 : 2013 | AGGREGATES FOR MORTAR |
UNI EN 13242 : 2013 | AGGREGATES FOR UNBOUND AND HYDRAULICALLY BOUND MATERIALS FOR USE IN CIVIL ENGINEERING WORK AND ROAD CONSTRUCTION |
UNI EN 1367-4 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF DRYING SHRINKAGE |
UNI EN 13179-1 : 2013 | TESTS FOR FILLER AGGREGATE USED IN BITUMINOUS MIXTURES - PART 1: DELTA RING AND BALL TEST |
UNI EN 1097-5 : 2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF THE WATER CONTENT BY DRYING IN A VENTILATED OVEN |
UNI EN 933-1 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
UNI EN 933-4 : 2008 | TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
UNI EN 13383-1 : 2013 | ARMOURSTONE - PART 1: SPECIFICATION |
UNI EN 1097-10 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
UNI EN 1744-6 : 2007 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF THE INFLUENCE OF RECYCLED AGGREGATE EXTRACT ON THE INITIAL SETTING TIME OF CEMENT |
UNI EN 1367-5 : 2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
I.S. EN 13043:2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
UNI EN 13043 : 2013 | AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS FOR ROADS, AIRFIELDS AND OTHER TRAFFICKED AREAS |
UNI EN 1097-1 : 2011 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF THE RESISTANCE TO WEAR (MICRO-DEVAL) |
UNI EN 1097-9 : 2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
UNI EN 933-10 : 2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 10: ASSESSMENT OF FINES - GRADING OF FILLER AGGREGATES (AIR JET SIEVING) |
UNI EN 1097-4 : 2008 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
UNI EN 13383-2 : 2013 | ARMOURSTONE - PART 2: TEST METHODS |
UNI EN 12620 : 2013 | AGGREGATES FOR CONCRETE |
UNI EN 13450 : 2013 | AGGREGATES FOR RAILWAY BALLAST |
UNE-EN 1097-11:2013 | Tests for mechanical and physical properties of aggregates - Part 11: Determination of compressibility and confined compressive strength of lightweight aggregates |
BS EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates Determination of resistance to disintegration of Lightweight Aggregates |
I.S. EN 933-11:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
07/30165777 DC : DRAFT AUG 2007 | BS EN 1097-4 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF THE VOIDS OF DRY COMPACTED FILLER |
DIN EN 1367-7 E : 2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
11/30231793 DC : 0 | BS EN 16262 - SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES |
07/30165783 DC : DRAFT AUG 2007 | BS EN 1097-7 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF THE PARTICLE DENSITY OF FILLER - PYKNOMETER METHOD |
S.R. CEN/TS 13286-54:2014 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 54: TEST METHOD FOR THE DETERMINATION OF FROST SUSCEPTIBILITY - RESISTANCE TO FREEZING AND THAWING OF HYDRAULICALLY BOUND MIXTURES |
14/30303776 DC : 0 | BS EN 13285 - UNBOUND MIXTURES - SPECIFICATIONS |
BS EN 1744-8:2012 | Tests for chemical properties of aggregates Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
07/30165774 DC : DRAFT AUG 2007 | BS EN 933-4 - TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF PARTICLE SHAPE - SHAPE INDEX |
DIN EN 933-11:2011-05 | Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate (includes Corrigendum AC:2009) |
PREN 933-6 : DRAFT 2011 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 6: ASSESSMENT OF SURFACE CHARACTERISTICS - FLOW COEFFICIENT OF AGGREGATES |
15/30311106 DC : 0 | BS EN 16236 - EVALUATION OF CONFORMITY OF AGGREGATES - INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
EN 16236:2013 | Evaluation of conformity of aggregates - Initial Type Testing and Factory Production Control |
18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
DIN EN 933-4:2015-01 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
DIN EN 1097-7:2008-06 | Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method |
DIN EN 1097-3:1998-06 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 3: DETERMINATION OF LOOSE BULK DENSITY AND VOIDS |
DIN EN 1097-9:2014-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 9: DETERMINATION OF THE RESISTANCE TO WEAR BY ABRASION FROM STUDDED TYRES - NORDIC TEST |
I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN 1744-1 : 2009 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 1: CHEMICAL ANALYSIS |
BS EN 1097-7:2008 | Tests for mechanical and physical properties of aggregates Determination of the particle density of filler. Pyknometer method |
BS EN 933-4:2008 | Tests for geometrical properties of aggregates Determination of particle shape. Shape index |
BS EN 12620:2013 | Aggregates for concrete |
UNE-EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
BS EN 13383-1:2013 | Armourstone Specification |
UNI EN 1097-8 : 2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
BS EN 933-10:2009 | Tests for geometrical properties of aggregates Assessment of fines. Grading of filler aggregates (air jet sieving) |
UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
BS EN 13139:2013 | Aggregates for mortar |
UNE-EN 1744-1:2010 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates Magnesium sulfate test |
BS EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates Determination of resistance to freezing and thawing |
UNE-EN 1097-6:2014 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
BS EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock |
BS EN 1744-4:2005 | Tests for chemical properties of aggregates Determination of water susceptibility of fillers for bituminous mixtures |
BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
BS EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates Determination of particle density and water absorption |
UNE-EN 1097-9:2014 | Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test |
BS EN 933-8 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 8: ASSESSMENT OF FINES - SAND EQUIVALENT TEST |
BS EN 13179-2:2000 | Test for filler aggregate used in bituminous mixtures Bitumen number |
I.S. EN 1097-8:2009 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
UNE-EN 1097-1:2011 | Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) |
BS EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates Determination of drying shrinkage |
EN 1367-6:2008 | Tests for thermal and weathering properties of aggregates - Part 6: Determination of resistance to freezing and thawing in the presence of salt (NaCl) |
EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
UNI EN 933-9 : 2013 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST |
EN 1744-1:2009+A1:2012 | Tests for chemical properties of aggregates - Part 1: Chemical analysis |
EN 1367-7:2014 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
EN 933-11:2009/AC:2009 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 11: CLASSIFICATION TEST FOR THE CONSTITUENTS OF COARSE RECYCLED AGGREGATE |
UNI EN 1097-6 : 2013 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF PARTICLE DENSITY AND WATER ABSORPTION |
EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
EN 1367-8:2014 | Tests for thermal and weathering properties of aggregates - Part 8: Determination of resistance to disintegration of Lightweight Aggregates |
ONORM EN 1744-4 : 2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
EN 1367-4:2008 | Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage |
EN 1744-6:2006 | Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement |
EN 1367-2:2009 | Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test |
EN 1744-7:2012 | Tests for chemical properties of aggregates - Part 7: Determination of loss of ignition of Municipal Incinerator Bottom Ash Aggregate (MIBA Aggregate) |
EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
EN 1744-5:2006 | Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts |
EN 933-4:2008 | Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index |
EN 932-1:1996 | Tests for general properties of aggregates - Part 1: Methods for sampling |
EN 933-6:2014 | Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates |
EN 1744-3:2002 | Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates |
EN 1367-3:2001/AC:2004 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 3: BOILING TEST FOR "SONNENBRAND BASALT" |
EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
EN 933-10:2009 | Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) |
EN 1367-1:2007 | Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing |
EN 1744-8:2012 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
DIN EN 1744-8 E : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
04/30088146 DC : DRAFT FEB 2004 | EN 1744-5 - TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
DIN EN 1367-6:2008-12 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
DIN 4226-1:2001-07 | AGGREGATES FOR CONCRETE AND MORTAR - PART 1: NORMAL AND HEAVY-WEIGHT AGGREGATES |
17/30345777 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
UNE-EN 1744-8:2013 | Tests for chemical properties of aggregates - Part 8: Sorting test to determine metal content of Municipal Incinerator Bottom Ash (MIBA) Aggregates |
I.S. EN 1367-8:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF RESISTANCE TO DISINTEGRATION OF LIGHTWEIGHT AGGREGATES |
PREN 1744-5 : DRAFT 2004 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF ACID SOLUBLE CHLORIDE SALTS |
UNI EN 1367-6 : 2008 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 6: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING IN THE PRESENCE OF SALT (NACL) |
UNE-EN 1367-7:2015 | Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates |
PREN 1097-8 : DRAFT 2016 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 8: DETERMINATION OF THE POLISHED STONE VALUE |
UNI EN 1744-8 : 2012 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 8: SORTING TEST TO DETERMINE METAL CONTENT OF MUNICIPAL INCINERATOR BOTTOM ASH (MIBA) AGGREGATES |
I.S. EN 1367-7:2014 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 7: DETERMINATION OF RESISTANCE TO FREEZING AND THAWING OF LIGHTWEIGHT AGGREGATES |
BS EN 16236:2013 | Evaluation of conformity of aggregates. Initial Type Testing and Factory Production Control |
BS EN 1744-3:2002 | Tests for chemical properties of aggregates Preparation of eluates by leaching of aggregates |
EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
BS EN 1097-10:2014 | Tests for mechanical and physical properties of aggregates Determination of water suction height |
UNE-EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
UNE-EN 1097-10:2015 | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
BS EN 13179-1:2013 | Tests for filler aggregate used in bituminous mixtures Delta ring and ball test |
BS EN 1744-5:2006 | Tests for chemical properties of aggregates Determination of acid soluble chloride salts |
EN 13055 : 2016 | LIGHTWEIGHT AGGREGATES |
EN 13179-2:2000 | Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number |
I.S. EN 1744-4:2005 | TESTS FOR CHEMICAL PROPERTIES OF AGGREGATES - PART 4: DETERMINATION OF WATER SUSCEPTIBILITY OF FILLERS FOR BITUMINOUS MIXTURES |
DIN EN 13055-2:2004-09 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
DIN EN 13055-1:2002-08 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
EN 13242:2002+A1:2007 | Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction |
EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
DIN EN 1097-10:2003-03 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
EN 13286-1:2003 | UNBOUND AND HYDRAULICALLY BOUND MIXTURES - PART 1: TEST METHODS FOR LABORATORY REFERENCE DENSITY AND WATER CONTENT - INTRODUCTION, GENERAL REQUIREMENTS AND SAMPLING |
I.S. EN 1097-10:2014 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 10: DETERMINATION OF WATER SUCTION HEIGHT |
EN 1744-4:2005 | Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures |
UNE-EN 933-9:2010 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 386:1977 | Liquid-in-glass laboratory thermometers Principles of design, construction and use |
ISO 3310-1:2016 | Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth |
EN ISO 3650:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS |
ISO 3310-2:2013 | Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate |
EN 933-3:2012 | Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index |
ISO 4788:2005 | Laboratory glassware Graduated measuring cylinders |
ISO 3650:1998 | Geometrical Product Specifications (GPS) Length standards Gauge blocks |
EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
ISO 384:2015 | Laboratory glass and plastics ware Principles of design and construction of volumetric instruments |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
ISO 6353-3:1987 | Reagents for chemical analysis — Part 3: Specifications — Second series |
EN 933-8:2012+A1:2015 | Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test |
OIML R 76-1 : 2006 | NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
ISO 649-1:1981 | Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.