ISO 14405-1:2016
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
08-04-2016
ISO 14405-1:2016 establishes the default specification operator (see ISO 17450‑2) for linear size and defines a number of special specification operators for linear size for features of size, e.g. "cylinder", "sphere", "torus,"[1], "circle", "two parallel opposite planes", or "two parallel opposite straight lines".
It also defines the specification modifiers and the drawing indications for these linear sizes.
It covers the following linear sizes:
a) local size:
- two-point size;
- spherical size;
- section size;
- portion size;
b) global size:
- direct global linear size:
- least-squares size;
- maximum inscribed size;
- minimum circumscribed size;
- minimax size;
- indirect global linear size;
c) calculated size:
- circumference diameter;
- area diameter;
- volume diameter;
d) rank-order size:
- maximum size;
- minimum size;
- average size;
- median size;
- mid-range size;
- range of sizes;
- standard deviation of sizes.
ISO 14405-1:2016 defines tolerances of linear sizes for the following:
- a + and/or − limit deviation (e.g. 0/−0,019);
- an upper limit of size (ULS) and/or lower limit of size (LLS) (e.g. 15,2 max., 12 min., or 30,2/30,181);
- an ISO tolerance class code in accordance with ISO 286‑1 (e.g. 10 h6);
with or without modifiers.
ISO 14405-1:2016 provides a set of tools to express several types of size characteristic. It does not present any information on the relationship between a function or a use and a size characteristic.
[1] A torus is a feature of size when its directrix diameter is fixed.
DevelopmentNote |
Supersedes ISO/DIS 14405-1. (08/2016)
|
DocumentType |
Standard
|
Pages |
54
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NF EN ISO 14405-1 : 2016 | Identical |
NBN EN ISO 14405-1 : 2016 | Identical |
NEN EN ISO 14405-1 : 2016 | Identical |
NS EN ISO 14405-1 : 2016 | Identical |
I.S. EN ISO 14405-1:2016 | Identical |
PN EN ISO 14405-1 : 2016 | Identical |
SN EN ISO 14405-1 : 2016 | Identical |
UNI EN ISO 14405-1 : 2011 | Identical |
SS-EN ISO 14405-1: 2016 | Identical |
UNI EN ISO 14405-1:2016 | Identical |
BS EN ISO 14405-1:2010 | Identical |
EN ISO 14405-1:2016 | Identical |
DIN EN ISO 14405-1:2017-07 | Identical |
UNE-EN ISO 14405-1:2018 | Identical |
BS EN ISO 14405-1:2016 | Identical |
UNE-EN ISO 14405-1:2012 | Identical |
IS 18229 : Part 1 : 2023 | Identical |
UNE-EN ISO 14405-1:2012 | Identical |
ISO 1206:2018 | Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
ISO 199:2014 | Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
BS EN ISO 3040:2016 | Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones |
16/30334592 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
13/30281595 DC : 0 | BS ISO 464 - ROLLING BEARINGS - RADIAL BEARINGS WITH LOCATING SNAP RING - DIMENSIONS AND GEOMETRICAL TOLERANCES (GPS) |
DIN EN ISO 14405-3 E : 2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016) |
12/30262686 DC : 0 | BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) |
BS ISO 12297-2:2018 | Rolling bearings. Cylindrical rollers Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers |
16/30339565 DC : 0 | BS ISO 12297-2 - ROLLING BEARINGS - CYLINDRICAL ROLLERS - PART 2: CERAMIC ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
UNE-EN ISO 3040:2016 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
DIN EN ISO 14405-2:2012-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
UNE-EN ISO 286-2:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
I.S. EN ISO 14405-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
ISO 3245:2015 | Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
UNE-EN ISO 14405-2:2015 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
EN ISO 14405-2:2011 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
BS EN ISO 2692:2014 | Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
BS 8888:2011 | Technical product documentation and specification |
EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
I.S. EN ISO 17296-3:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
17/30348146 DC : 0 | BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
13/30275718 DC : 0 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
PD ISO/TS 17863:2013 | Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies |
15/30321493 DC : 0 | BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
DIN EN ISO 14638 E : 2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
11/30234091 DC : DRAFT JULY 2011 | BS 8888 - TECHNICAL PRODUCT DOCUMENTATION AND SPECIFICATION |
EN ISO 2692:2014 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
ONORM EN ISO 286-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCES, DEVIATIONS AND FITS (ISO 286-1:2010 + COR 1:2013) |
UNE-EN ISO 286-1:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) |
BS EN ISO 14405-2:2011 | Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
UNE-EN ISO 2692:2015 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
I.S. EN ISO 2692:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014) |
17/30348149 DC : 0 | BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
BS ISO 464:2015 | Rolling bearings. Radial bearings with locating snap ring. Dimensions, geometrical product specifications (GPS) and tolerance values |
BS EN ISO 18391:2016 | Geometrical product specifications (GPS). Population specification |
BS EN ISO 17296-3:2016 | Additive manufacturing. General principles Main characteristics and corresponding test methods |
I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
12/30264410 DC : 0 | BS ISO 199 - ROLLING BEARINGS - THRUST BEARINGS - TOLERANCES |
UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
ABMA ISO 199 : 2014 | ROLLING BEARINGS - THRUST BEARINGS - GEOMETRICAL PRODUCT SPECIFICATION (GPS) AND TOLERANCE VALUES |
ISO/TS 17863:2013 | Geometrical product specification (GPS) Tolerancing of moveable assemblies |
DIN EN ISO 2692:2015-12 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
ISO 464:2015 | Rolling bearings Radial bearings with locating snap ring Dimensions, geometrical product specifications (GPS) and tolerance values |
EN ISO 14405-3:2017 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016) |
DIN EN ISO 14405-3:2013-08 (Draft) | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016) |
BS EN ISO 286-1:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Basis of tolerances, deviations and fits |
DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
14/30257552 DC : 0 | BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES |
BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
BS EN ISO 14405-3:2017 | Geometrical product specifications (GPS). Dimensional tolerancing Angular sizes |
BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
15/30284673 DC : 0 | BS EN ISO 17450-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING FORM, ORIENTATION LOCATION AND RUN-OUT DEVIATION |
BS ISO 492:2014 | Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
BS ISO 16792:2006 | Technical product documentation. Digital product definition data practices |
ISO 16792:2015 | Technical product documentation Digital product definition data practices |
17/30346164 DC : 0 | BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
I.S. EN ISO 1938-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
UNI EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
I.S. EN ISO 3040:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - CONES (ISO 3040:2016) |
DIN EN ISO 286-2:2010-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
ISO 14405-2:2011 | Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
PREN ISO 2692 : DRAFT 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012) |
ISO 18391:2016 | Geometrical product specifications (GPS) Population specification |
ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
ISO 3040:2016 | Geometrical product specifications (GPS) Dimensioning and tolerancing Cones |
ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
ISO 14405-3:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes |
ISO 17296-3:2014 | Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
EN ISO 3040:2016 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016) |
EN ISO 17296-3:2016 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
EN ISO 1938-1:2015 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
EN ISO 1938-2:2017 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
EN ISO 18391:2016 | Geometrical product specifications (GPS) - Population specification (ISO 18391:2016) |
DIN EN ISO 1938-2 E : 2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
16/30341970 DC : 0 | BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
BS ISO 17296-3 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
BIS IS 919-1 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 1: BASIS OF TOLERANCE, DEVIATION AND FITS |
ISO 12297-2:2018 | Rolling bearings — Cylindrical rollers — Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers |
11/30231340 DC : 0 | BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
13/30272933 DC : 0 | BS EN ISO 14405-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES |
BS EN ISO 1938-1:2015 | Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
12/30258651 DC : 0 | BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES |
I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
13/30240527 DC : 0 | BS ISO 129-2 - TECHNICAL PRODUCT DOCUMENTATION - INDICATION OF DIMENSIONS AND TOLERANCES - PART 2: DIMENSIONING OF MECHANICAL ENGINEERING DRAWINGS |
BS ISO 199:2014 | Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values |
BS ISO 3245:2015 | Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
I.S. EN ISO 14405-3:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO/DIS 14405-3:2013) |
I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
I.S. EN ISO 18391:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - POPULATION SPECIFICATION (ISO 18391:2016) |
NF EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
UNE-EN ISO 17296-3:2017 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
ISO 1938-2:2017 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
DIN EN ISO 14405-3:2017-07 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 3: ANGULAR SIZES (ISO 14405-3:2016) |
BS 8888:2013 | Technical product documentation and specification |
ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
ISO/TS 17863:2013 | Geometrical product specification (GPS) Tolerancing of moveable assemblies |
ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
ISO 17450-1:2011 | Geometrical product specifications (GPS) — General concepts — Part 1: Model for geometrical specification and verification |
ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
ISO 3098-2:2000 | Technical product documentation — Lettering — Part 2: Latin alphabet, numerals and marks |
ISO 17450-3:2016 | Geometrical product specifications (GPS) General concepts Part 3: Toleranced features |
ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
ISO 10579:2010 | Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.