UNE-EN 61400-4:2013
Current
Current
The latest, up-to-date edition.
Wind turbines - Part 4: Design requirements for wind turbine gearboxes
Available format(s)
Hardcopy , PDF
Language(s)
Spanish, Castilian, English
Published date
09-25-2013
Publisher
Committee |
CTN 221
|
DocumentType |
Standard
|
Pages |
176
|
PublisherName |
Asociacion Espanola de Normalizacion
|
Status |
Current
|
Standards | Relationship |
EN 61400-4:2013 | Identical |
IEC 61400-4:2012 | Identical |
EN ISO 4287:1998/A1:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
ISO 1328-2:1997 | Cylindrical gears ISO system of accuracy Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
DIN 3990-4:1987-12 | CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; CALCULATION OF SCUFFING LOAD CAPACITY |
ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
ISO 11007:1997 | Petroleum products and lubricants Determination of rust-prevention characteristics of lubricating greases |
EN ISO 4288 : 1997 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
EN 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
ISO 14104:2017 | Gears — Surface temper etch inspection after grinding, chemical method |
ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
ISO 8579-2:1993 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
ISO 5593:1997 | Rolling bearings Vocabulary |
ISO 2394:2015 | General principles on reliability for structures |
DIN 51819-1:2016-12 | TESTING OF LUBRICANTS - MECHANICAL-DYNAMIC TESTING IN THE ROLLER BEARING TEST APPARATUS FE8 - PART 1: GENERAL WORKING PRINCIPLES |
IEC TS 61400-13:2001 | Wind turbine generator systems - Part 13: Measurement of mechanical loads |
DIN 471:2011-04 | RETAINING RINGS FOR SHAFTS - NORMAL TYPE AND HEAVY TYPE |
ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
DIN 472:2016-10 (Draft) | RETAINING RINGS FOR BORES - NORMAL TYPE AND HEAVY TYPE |
DIN 7190:2001-02 | INTERFERENCE FITS - CALCULATION AND DESIGN RULES |
ISO 6336-3:2006 | Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
AGMA 6001 : D | DESIGN AND SELECTION OF COMPONENTS FOR ENCLOSED GEAR DRIVES |
ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
DIN 51517-3:2014-02 | LUBRICANTS - LUBRICATING OILS - PART 3: LUBRICATING OILS CLP, MINIMUM REQUIREMENTS |
EN 61400-1:2005/A1:2010 | WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
ISO/TR 15144-1:2014 | Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles |
ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
AGMA 925 : A | EFFECT OF LUBRICATION ON GEAR SURFACE DISTRESS |
IEC 61400-22:2010 | Wind turbines - Part 22: Conformity testing and certification |
ISO/TR 1281-2:2008 | Rolling bearings Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
IEC 61400-3:2009 | Wind turbines - Part 3: Design requirements for offshore wind turbines |
AGMA 9005 : E | INDUSTRIAL GEAR LUBRICATION |
ISO 10474:2013 | Steel and steel products — Inspection documents |
EN 10204:2004 | Metallic products - Types of inspection documents |
EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ISO/TR 1281-1:2008 | Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life |
SAE FATIGUE DESIGN HDBK : 3ED 1997 | FATIGUE DESIGN HANDBOOK AE-22 |
ISO 12925-1:1996 | Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems |
ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
ISO 6336-6:2006 | Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
DIN 6892:2012-08 | Drive type fastenings without taper action - Parallel keys - Calculation and design |
ISO 10825:1995 | Gears — Wear and damage to gear teeth — Terminology |
ISO 8579-1:2002 | Acceptance code for gear units — Part 1: Test code for airborne sound |
EN 61400-22:2011 | Wind turbines - Part 22: Conformity testing and certification |
ISO 12107:2012 | Metallic materials — Fatigue testing — Statistical planning and analysis of data |
IEC 61400-1:2005+AMD1:2010 CSV | Wind turbines - Part 1: Design requirements |
ISO 76:2006 | Rolling bearings Static load ratings |
ISO/TS 16281:2008 | Rolling bearings Methods for calculating the modified reference rating life for universally loaded bearings |
ISO 15243:2017 | Rolling bearings — Damage and failures — Terms, characteristics and causes |
DIN 45667:1969-10 | CLASSIFICATION METHODS FOR EVALUATION OF RANDOM VIBRATIONS |
US$181.13
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - Spanish
PDF - Spanish
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.