Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM B 62 : 2017 : REDLINE

Current

Current

The latest, up-to-date edition.

Standard Specification for Composition Bronze or Ounce Metal Castings

Available format(s)

PDF

Language(s)

English

Published date

01-04-2017

CONTAINED IN VOL. 02.01, 2017 Defines requirements for an alloy having a composition of copper, tin, lead, and zinc, used for component castings of valves, flanges, and fittings.

Committee
B 05
DevelopmentNote
Supersedes QQ C 390 (B). (07/2004)
DocumentType
Redline
Pages
4
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This specification2 establishes requirements for an alloy having a composition of copper, tin, lead, and zinc, used for component castings of valves, flanges, and fittings. The common trade name of this alloy is 85-5-5-5; the correct identification is Copper Alloy UNS No. C83600.3

1.2The castings covered are used in products that may be manufactured in advance and supplied from stock from the manufacturer or other dealer.

1.3Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

A-A-59440-17 Base Document:2012 Valve, Trap, Strainer, Water, Oil, and Gas (WOG)
MIL-W-19044 Revision E:1993 WASHER-EXTRACTOR MACHINE, LAUNDRY, COMMERCIAL (NAVAL SHIPBOARD)
MSS SP 125 : 2010 GRAY IRON AND DUCTILE IRON IN-LINE, SPRING-LOADED, CENTER-GUIDED CHECK VALVES
A-A-59440-1 Revision B:2012 COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
A-A-59440-2 Revision B:2012 COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
MS35758 Revision D:2012 CUPS, GREASE, MANUAL FEED
ASTM F 1245 : 1989 : R1994 : EDT 1 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
ASTM F 721 : 1981 : R2014 Standard Specification for Gage Piping Assemblies
CSA 6.32:2012 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
A-A-59440-7 Revision B:2012 Valve, Shut-Off, Screw Stem, Threaded Type, 150 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads
MIL V 13612 : E VALVE, RELIEF, PRESSURE AND TEMPERATURE (FOR HOT WATER SUPPLY SYSTEMS)
A-A-59006 Base Document:1996 INDICATORS, PIPELINE, FLOW, SIGHT
MSS SP 106 : 2012 CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300
AWWA C503 : 2014 WET-BARREL FIRE HYDRANTS
ASTM F 1511 : 2016-11 SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS
ASTM F 1380 : 1995 : REV A Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ASTM F 1245 : 1989 : R2006 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
MIL-S-24686 Revision A:1992 Sprinkler, Automatic, Quick Response
A-A-59469 Base Document:1999 Washer-Extractor, Laundry, 35 to 200 Pound Capacity (Naval Shipboard)
OO-L-2880 Base Document:1997 LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR
MIL-DTL-18436 Revision G:2017 Valves, Check - Bronze -and Steel-Body
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
MIL-DTL-20064 Revision F:2014 VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS
A-A-59440-13 Base Document:2012 Valve, Relief, Angle, Steam
MS35759 Revision C:2008 CUPS, GREASE, AUTOMATIC FEED
MIL V 24624 : 0 VALVE, BUTTERFLY, WAFER AND LUG STYLE, SHIPBOARD SERVICE
MIL-P-24589 Revision A:1992 Proportioner Systems, Balanced Pressure, Aqueous Film-Forming Foam (AFFF) Liquid Concentrate
MIL V 18436 : F VALVES, CHECK, BRONZE, CAST IRON, AND STEEL BODY
A-A-59440-11 Base Document:2012 Valve, Swing, Check-Valve, Steam
A-A-59440-4 Revision B:2012 COCK-VALVE, DRAIN, GROUND KEY, 150 PSI, BRASS, STEAM PRESSURE, NPTF-1 THREADS
MIL-DTL-16556 Revision F:2017 Valve, Solenoid, Three-Way Bypass ( Naval Shipboard Use )
A-A-59440-5 Revision B:2012 Cock-Valve, Drain, Ground Key, Bib Nozzle 150 PSI, Steam Pressure, Brass, NPTF-1 Threads
A-A-59440-18 Base Document:2012 Valve, Trap, Strainer, Steam
MIL-DTL-23554 Revision E:2009 WASHER-EXTRACTOR, LAUNDRY, 16- TO 20-POUND CAPACITY (SUBMARINE SERVICE)
A-A-59440-8 Revision B:2012 Cock-Valve, Shut-Off, Screw Stem, Threaded Type, 50 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads
MSS SP 123 : 2013 NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE
CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASTM F 3226/F3226M : 2016 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
A-A-59440-3 Revision B:2012 COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS
ASTM F 1245 : 1989 : R2012 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
ASTM B 584 : 2014 : REDLINE Standard Specification for Copper Alloy Sand Castings for General Applications
A-A-59440-9 Revision B:2012 Cock-Valve, Plug, Ground Key, Threaded Type, Brass, 125 PSI Steam, NPTF-1 Threads
AWWA C500 : 2009 METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
A-A-59440-14 Base Document:2012 Valve, Flapper, Check-Swing, Water
AWWA C700 : 2015 COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE
AWWA C518 : 2013 DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE
AWWA C515 : 2015 REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
ASTM F 1508 : 1996 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
ASTM F 3226/F3226M : 2016 : EDT 1 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
ASTM F 1974:2009 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ASTM F 1155 : 2010 Standard Practice for Selection and Application of Piping System Materials
ASTM F 1380 : 1995 : REV A : R2002 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ASTM F 721 : 1981 : R1998 Standard Specification for Gage Piping Assemblies
ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008)
ASTM F 721 : 1981 : R2008 Standard Specification for Gage Piping Assemblies
ASTM F 1508 : 1996 : R2010 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
ASTM F 1974 : 2009 : R2015 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ASTM F 1155 : 2010 : R2015 Standard Practice for Selection and Application of Piping System Materials
ASME B31.1 : 2016 POWER PIPING
ASME B31.3:2016 PROCESS PIPING
ASTM F 1370 : 1992 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
MIL V 16271 : F VALVE, TANK FLOAT, ANGLE AND GLOBE PATTERN
MIL V 12126 : E VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI
MSS SP 81 : 2017 STAINLESS-STEEL OR STAINLESS-STEEL-LINED, BONNETLESS, KNIFE GATE VALVES WITH FLANGED ENDS
A-A-59440-10 Base Document:2012 Valve, Inline Check-Valve, Water, Oil, and Gas (WOG)
AWWA C507 : 2015 BALL VALVES, 6 IN. THROUGH 60 IN. (150 MM THROUGH 1,500 MM)
A-A-59440-15 Base Document:2012 Valve, Relief, Angle, Water, Oil, and Gas (WOG)
ASTM F 1370 : 1992 : R2011 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ANSI/AWWA C710 : 2015 COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE
ASTM F 2929 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
AWWA C713 : 2015 COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE
MIL-PRF-12125 Revision H:2011 VALVE, GATE: QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK
MIL-HDBK-270 Revision A:1991 METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
MIL-E-24759 Base Document:1991 Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate
GG W 00101 : C WASHERS, BEDPAN AND URINAL
MIL-A-17204 Revision D:1982 ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD
ASTM F 721 : 1981 : R2004 Standard Specification for Gage Piping Assemblies
A-A-59471 Base Document:1999 Dry Cleaning Presses and Finishing Equipment (Naval Shipboard)
MIL V 12125 : F VALVE, GATE, QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK
A-A-59440-16 Base Document:2012 Valve, Angle, Shutoff, Water, Oil, and Gas (WOG)
BS 1560-3.3:1989 Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges Specification for copper alloy and composite flanges
MIL-R-24414 Revision D:1991 Reels and Guides, Hose, Firefighting, Manually Operated
MSS SP 78 : 2011 GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS
AWWA C509 : 2015 RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
ASTM F 1245 : 1989 : R2001 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
ASTM F 1508 : 1996 : R2004 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
MSS SP 80 : 2013 BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES
A-A-2622 Revision A:1998 ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING
MIL-V-15020 Revision F:1968 VALVE, FLUSH (SHIPBOARD)
AWWA C502 : 2014 DRY-BARREL FIRE HYDRANTS
CSA 6.32 : 2012 : INC : ADD A : 2013 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
MIL-C-1203 Revision C:1973 COCKS, DRAIN, COCKS PLUG, AND COCKS, SHUTOFF, SCREW STEM
MIL-S-16293 Revision G:1980 STRAINER, SEDIMENT, PIPELINE, WATER, AIR, GAS, OIL, OR STEAM
MIL-I-20037 Revision B:1984 INDICATORS, SIGHT, LIQUID LEVEL, DIRECT INDIRECT READING, TUBULAR GLASS PLASTIC
WW-T-696 Revision E:1984 TRAPS, STEAM
MIL-G-24748 Revision A:1994 GASKETS, METALLIC & RUBBER, FOR USE IN UNION PIPE FITTINGS 1/4 TO 2 INCH NPS WITH VARIOUS FLUIDS FROM MINUS 30 DEGREES F (MINUS 34 DEGREES C) TO 425 DEGREES F (218 DEGREES C)
A-A-59440-6 Revision B:2012 Cock-Valve, Plug, Three-Way, Threaded Type, Brass, 125 PSI, NPTF-1 Threads, Water, Oil and Gas (WOG)
ASTM F 1370 : 1992 : R2005 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
ASTM B 763/B763M : 2015 : REDLINE Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM F 1508 : 1996 : R2016 : EDT 1 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
ASTM E 310 : 2015 : REDLINE Standard Reference Radiographs for Tin Bronze Castings
ASTM B 824 : 2017 : REDLINE Standard Specification for General Requirements for Copper Alloy Castings
MSS SP 88 : 2015 DIAPHRAGM VALVES
ASTM B 30 : 2016 : REDLINE Standard Specification for Copper Alloys in Ingot Form
ASME B16.33 : 2012 : R2017 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2)
ASME B16.33 : 2012 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2)
CSA/ANSI LC 4 : 2012 : INC : ADD A : 2013 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASME B16.18 : 2012 Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br>
CSA/ANSI LC 4:2012 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
CSA/ANSI LC 4-2012 (R2017)/CSA 6.32-2012 (R2016) PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASME B31.5 : 2016 REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS
ASME B16.15 : 2013 CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250
ASME B16.51 : 2013 Copper and Copper Alloy Press-Connect Pressure Fittings
ASME B16.23 : 2016 CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV
ASME B16.44 : 2012 : R2017 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI
ASME B31.12 : 2014 HYDROGEN PIPING AND PIPELINES
ASME B16.44 : 2012 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI
ASME B31.3 SPANISH : 2010 PROCESS PIPING

ASTM B 208 : 2014 : REDLINE Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM B 824 : 2017 : REDLINE Standard Specification for General Requirements for Copper Alloy Castings
ASTM B 846 : 2011-07 TERMINOLOGY FOR COPPER AND COPPER ALLOYS
ASTM E 8/E8M : 2016-09 TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS

View more information
$110.51
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more