Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM B 584 : 2014 : REDLINE

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Copper Alloy Sand Castings for General Applications

Available format(s)

PDF

Superseded date

08-11-2022

Language(s)

English

Published date

14-06-2014

CONTAINED IN VOL. 02.01, 2017 Defines the requirements for copper alloy sand castings for general applications.

Committee
B 05
DevelopmentNote
Supersedes ASTM B 119, ASTM B 132, ASTM B 143, ASTM B 144, ASTM B 145, ASTM B 146, ASTM B 147, ASTM B 149, ASTM B 198 and ASTM B 292 (01/2002) Supersedes MIL C 11866 (C). (06/2004) Supersedes QQ C 390 (B). (07/2004)
DocumentType
Redline
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification covers requirements for copper alloy sand castings for general applications. Nominal compositions of the alloys defined by this specification are shown in Table 1.2 This is a composite specification replacing former documents as shown in Table 1.

Note 1Other copper alloy castings are included in the following ASTM Specifications: B22/B22M, B61, B62, B66, B67, B148, B176, B271/B271M, B369, B427, B505/B505M, B763/B763M, B770, and B806.

1.2Component part castings produced to this specification may be manufactured in advance and supplied from stock. In such cases the manufacturer shall maintain a general quality certification of all castings without specific record or date of casting for a specific casting.

1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standards Relationship
SAE AMS 4862 : 2016 Identical

MIL-DTL-29210-2 Base Document:2010 HOSE ASSEMBLY, IRON, BRASS, AND CRES CONNECTORS, RUBBER, METAL LINED, WIRE REINFORCED, 1.250, 1.500, AND 2.000 INCH HOSE, 250 PSIG, SATURATED STEAM SERVICE
A-A-59440-17 Base Document:2012 Valve, Trap, Strainer, Water, Oil, and Gas (WOG)
ASTM F 1987 : 2001 Standard Specification for Multilayer Pipe Type 2 , Compression Fittings, and Compression Joints for Hydronic Heating Systems
MIL V 1189 : D VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE]
MIL-DTL-52404 Revision C:2010 CONNECTIONS: HOSE, FIRE AND WATER
MIL-DTL-24509 Revision B:2017 Valves, Flanged, Balland Plugfor Sewageand Seawater Service
MIL-T-12173 Revision D:1992 TRAVELLER, BICYCLE
MSS SP 125 : 2010 GRAY IRON AND DUCTILE IRON IN-LINE, SPRING-LOADED, CENTER-GUIDED CHECK VALVES
A-A-59440-1 Revision B:2012 COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
A-A-59440-2 Revision B:2012 COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
MIL-DTL-15743-10 Revision C:2007 Switch, Rotary, Enclosed, Submersible (15 Feet), Snap Action, 500 Volts Alternating Current/250 Volts Direct Current, 30 Ampere, Symbol 852 (4PDT)
MS35758 Revision D:2012 CUPS, GREASE, MANUAL FEED
MIL-DTL-15743-9 Revision C:2007 SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 500 VOLTS ALTERNATING CURRENT/250 VOLTS DIRECT CURRENT, 30 AMPERE, SYMBOLS 839.1 (4PDT), 848.1 (TPDT), AND 2752.1 (SPECIAL)
AWWA C800 : 2014 UNDERGROUND SERVICE LINE VALVES AND FITTINGS
MIL-DTL-3922 Revision E:2016 FLANGES, WAVEGUIDE, GENERAL PURPOSE, GENERAL SPECIFICATION FOR
MSS SP 106 : 2012 CAST COPPER ALLOY FLANGES AND FLANGED FITTINGS: CLASS 125, 150, AND 300
A-A-59440-7 Revision B:2012 Valve, Shut-Off, Screw Stem, Threaded Type, 150 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads
MS14308 Revision D:2015 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, REDUCING, CLASS 125
MIL V 13612 : E VALVE, RELIEF, PRESSURE AND TEMPERATURE (FOR HOT WATER SUPPLY SYSTEMS)
ASTM F 998 : 2012 Standard Specification for Centrifugal Pump, Shipboard Use
MS14314 Revision E:2015 PLUGS, PIPE, BRASS OR BRONZE, THREADED (SQUARE HEAD AND SQUARE SOCKET), CLASSES 250 AND 125
MIL-H-24580 Base Document:1974 HOSE ASSEMBLIES, SYNTHETIC RUBBER, NON-COLLAPSIBLE, FIRE FIGHTING
AWWA C500 : 2009 METAL-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
ASTM B 30 : 2016 : REDLINE Standard Specification for Copper Alloys in Ingot Form
ANSI/AWWA C561 : 2014 FABRICATED STAINLESS-STEEL SLIDE GATES
AWWA C503 : 2014 WET-BARREL FIRE HYDRANTS
ASTM F 3226/F3226M : 2016 : EDT 1 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
BS EN ISO 4126-2:2003 Safety devices for protection against excessive pressure Bursting disc safety devices
ASTM F 1986 : 2001 : R2006 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ASTM F 2798 : 2009 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM B 824 : 2017 : REDLINE Standard Specification for General Requirements for Copper Alloy Castings
ASTM F 1718 : 2001 : R2019 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 1511 : 2016-11 SPECIFICATION FOR MECHANICAL SEALS FOR SHIPBOARD PUMP APPLICATIONS
ASTM E 272 : 2015 : REDLINE Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
ASTM F 1718 : 2001 : R2013 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 1986 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
ASTM F 2798 : 2009 : R2018 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
MIL-L-15596 Revision G:1988 LOCK, COMBINATION (SAFE AND SAFE LOCKER)
NBR 15827 : 2014 INDUSTRIAL VALVES FOR INSTALLATIONS OF EXPLORATION, PRODUCTION, REFINING AND TRANSPORT OF PETROL PRODUCTS - REQUIREMENTS FOR DESIGN AND PROTOTYPE TEST
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-B-44037 Revision A:1986 BLENDER, POWERED MIX, MECHANICALLY REFRIGERATED
DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-S-24686 Revision A:1992 Sprinkler, Automatic, Quick Response
OO-L-2880 Base Document:1997 LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR
MIL-P-53065 Base Document:1986 PUMPING UNIT, FRAME MOUNTED, 1-1/2 INCH, ELECTRIC MOTOR DRIVEN, 35 GPM AT 25 FEET TOTAL HEAD
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-18436 Revision G:2017 Valves, Check - Bronze -and Steel-Body
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-N-52110 Revision F:1982 NOZZLE, FUEL & OIL SERVICING, NONAUTOMATIC SHUTOFF & NOZZLES, FUEL SERVICING AUTOMATIC SHUTOFF
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-24646 Revision C:2015 FUSE BOXES, GENERAL SPECIFICATION FOR
MIL-DTL-20064 Revision F:2014 VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS
A-A-59440-13 Base Document:2012 Valve, Relief, Angle, Steam
MS35759 Revision C:2008 CUPS, GREASE, AUTOMATIC FEED
MIL V 18436 : F VALVES, CHECK, BRONZE, CAST IRON, AND STEEL BODY
A-A-59440-11 Base Document:2012 Valve, Swing, Check-Valve, Steam
A-A-59440-4 Revision B:2012 COCK-VALVE, DRAIN, GROUND KEY, 150 PSI, BRASS, STEAM PRESSURE, NPTF-1 THREADS
A-A-59440-5 Revision B:2012 Cock-Valve, Drain, Ground Key, Bib Nozzle 150 PSI, Steam Pressure, Brass, NPTF-1 Threads
ASTM F 1380 : 1995 : REV A : R2002 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
A-A-59440-18 Base Document:2012 Valve, Trap, Strainer, Steam
MS14305 Revision D:2015 FITTINGS, PIPE, BRASS OR BRONZE, THREADED (TEES, CROSSES, 45-DEGREE ELBOWS, AND COUPLINGS), CLASS 125
CSA 6.32:2012 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
A-A-59440-8 Revision B:2012 Cock-Valve, Shut-Off, Screw Stem, Threaded Type, 50 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads
MIL-DTL-15743-3 Revision C:2007 SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOLS 801.2 (DPST), 804.1 (TPST), 829.1 (DPDT), AND 879.1 (DPTT)
MIL V 12125 : F VALVE, GATE, QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK
MSS SP 123 : 2013 NON-FERROUS THREADED AND SOLDER-JOINT UNIONS FOR USE WITH COPPER WATER TUBE
MIL-I-24783 Base Document:1993 ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE
MIL-P-10360 Revision G:1993 PUMP, CENTRIFUGAL 4 INCH AND 6 INCH, GASOLINE ENGINE AND DIESEL ENGINE DRIVEN FOR WATER
MIL-DTL-32408 Base Document:2012 INTEGRAL MOTOR PUMP (IMP)
MS14309 Revision E:2015 TEES, PIPE, BRASS OR BRONZE, THREADED, REDUCING, CLASS 125
CSA 6.32 : 2012 : INC : ADD A : 2012 : R2016 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASTM F 1380 : 1995 : REV A : R2002 : EDT 1 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2008)
A-A-59440-3 Revision B:2012 COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS
ASTM F 956 : 1991 : R2012 Standard Specification for Bell, Cast, Sound Signalling
A-A-59440-9 Revision B:2012 Cock-Valve, Plug, Ground Key, Threaded Type, Brass, 125 PSI Steam, NPTF-1 Threads
MIL-DTL-24127 Revision A:2016 EDUCTORS, GASOLINE, OIL, OR WATER
WW-C-633 Revision D:1980 COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE
A-A-59440-14 Base Document:2012 Valve, Flapper, Check-Swing, Water
ANSI/AWWA C702 : 2015 COLD-WATER METERS - COMPOUND TYPE
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
AWWA C701 : 2015 COLD-WATER METERS - TURBINE TYPE, FOR CUSTOMER SERVICE
AWWA C518 : 2013 DUAL-DISC SWING-CHECK VALVES FOR WATERWORKS SERVICE
AWWA E103 : 2015 HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS
AWWA C703 : 2015 COLD-WATER METERS - FIRE-SERVICE TYPE
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
ASTM F 1380 : 1995 : REV A Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
ASTM F 1548 : 2001 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1718 : 2001 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 1510 : 2007 : R2013 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
ASTM F 1245 : 1989 SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, SHIPBOARD
ASTM F 1548 : 2001 : R2012 Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 1974 : 2009 : R2015 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
ASME B31.1 : 2016 POWER PIPING
BS 5150:1990 Specification for cast iron gate valves
BS 1414:1975 Specification for steel wedge gate valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries
MIL C 15730 : M COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
NFPA 1963 : 2014 FIRE HOSE CONNECTIONS
MS51952 Revision D:2015 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, STREET, CLASS 125
ASTM F 956 : 1991 : R2001 Standard Specification for Bell, Cast, Sound Signalling
MIL-P-52405 Revision C:1990 PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN (FOR WATER)
CSA 6.32 : 2012 : INC : ADD A : 2013 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
A-A-59440-10 Base Document:2012 Valve, Inline Check-Valve, Water, Oil, and Gas (WOG)
A-A-59440-15 Base Document:2012 Valve, Relief, Angle, Water, Oil, and Gas (WOG)
MIL-PRF-20042 Revision F:2015 FLANGES, PIPE, BRONZE (SILVER BRAZING)
MIL-C-11866 Revision C:1980 CASTINGS, PRECISION, NONFERROUS
ASTM F 2929 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
ASTM F 3226/F3226M : 2016 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
MS14311 Revision D:2015 FITTINGS, PIPE, BRASS OR BRONZE, THREADED (90-DEGREE ELBOWS, TEES, CROSSES, 45-DEGREE ELBOWS, AND COUPLINGS), CLASS 250
MS14312 Revision D:2015 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, REDUCING, CLASS 250
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASTM F 1475 : 1993 Specification for Dispensing Tanks, 250 Liter Maximum (Withdrawn 1998)
ASTM F 998 : 2012 : R2018 Standard Specification for Centrifugal Pump, Shipboard Use
ASTM F 956 : 1991 : R1996 Standard Specification for Bell, Cast, Sound Signalling
AWWA C708 : 2015 COLD-WATER METERS - MULTIJET TYPE
AWWA C562 : 2014 FABRICATED ALUMINUM SLIDE GATES
AWWA C713 : 2015 COLD-WATER METERS - FLUIDIC-OSCILLATOR TYPE
AWWA C704 : 2015 PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS
AWWA C501 : 1992 CAST-IRON SLUICE GATES
ANSI/AWWA C714 : 2013 COLD-WATER METERS FOR RESIDENTIAL FIRE SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES
ASTM F 2798 : 2009 : R2014 : EDT 1 Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
ASTM F 1718 : 2001 : R2006 Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
ASTM F 1548 : 2001 : R2006 Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
ASTM F 956 : 1991 : R2006 Standard Specification for Bell, Cast, Sound Signalling
AWWA C712 : 2019 COLD-WATER METERS - SINGLEJET TYPE
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
AWWA C560:2014 CAST-IRON SLIDE GATES
MIL-DTL-15743-8 Revision C:2007 SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 500 VOLTS ALTERNATING CURRENT/250 VOLTS DIRECT CURRENT, 30 AMPERE, SYMBOLS 838.1 (DPDT), 840.1 (DPDT), AND 851 (TPST)
DOD HDBK 270 : 0 METALLIC MATERIALS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
MIL-DTL-15743-5 Revision D:2014 SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOLS 827.1 (SPECIAL), 850.1 (TPDT), AND 863 (4PDT)
MIL-PRF-12125 Revision H:2011 VALVE, GATE: QUICK-OPENING, CLASS 125, CAST IRON, WITH POSITION LOCK
MIL-PRF-24176 Revision C:2004 CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC)
ASTM F 1245 : 1989 : R1994 : EDT 1 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
MIL-HDBK-270 Revision A:1991 METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
ASTM F 1245 : 1989 : R2012 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
MIL-DTL-15743-7 Revision C:2007 SWITCH, ROTARY, ENCLOSED, SPLASHPROOF, SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOL 814 (DPST)
MIL-S-24660 Base Document:1985 Sprinkler Head, 180 Degrees Full Cone
MIL-DTL-1183 Revision K:2016 Fittings, Pipe, Cast Bronze, Silver-Brazing, General Specification for
MS14310 Revision D:2015 CAPS, PIPE, BRASS OR BRONZE, THREADED, CLASS 125
MIL-DTL-3155 Revision D:2013 Valve, Temperature-Regulating Ventilation Heater, Steam Control, Naval Shipboard Use
ANSI/AWWA C710 : 2015 COLD-WATER METERS - DISPLACEMENT TYPE, PLASTIC MAIN CASE
ASTM F 1510 : 2007 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
MSS SP 131 : 2017 METALLIC MANUALLY OPERATED GAS DISTRIBUTION VALVES
MIL-A-17204 Revision D:1982 ADAPTERS, STRAIGHT OR REDUCING, PIPE THREAD TO HOSE THREAD
WW-C-621 Revision G:1990 COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED)
MS14315 Revision D:2015 BUSHINGS, PIPE, BRASS OR BRONZE, THREADED (OUTSIDE HEAD, INSIDE HEAD, AND FACE) CLASS 250
MIL-DTL-29210-1 Base Document:2010 HOSE ASSEMBLY, IRON, BRASS, AND CRES CONNECTORS, RUBBER, METAL LINED, WIRE REINFORCED, .750 AND 1.00 INCH HOSE, 250 PSIG, SATURATED STEAM SERVICE
AWWA C520 : 2014 KNIFE GATE VALVES, SIZES 2 IN. (50 MM) THROUGH 96 IN. (2,400 MM)
WW-P-460 Revision F:2015 PIPE FITTINGS; BRASS OR BRONZE (THREADED), CLASSES 125 AND 250 POUND
MS14307 Revision D:2015 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 45-DEGREE, STREET, CLASS 125
MIL C 11053 : F COUPLING ASSEMBLIES, HOSE (CHEMICAL, 3/4 AND 1-INCH)
MS14306 Revision D:2015 FITTINGS, PIPE, BRASS OR BRONZE, THREADED (REDUCERS, CLOSE AND OPEN RETURN BENDS, AND 45-DEGREE Y-BRANCHES), CLASS 125
MSS SP 129 : 2014 COPPER-NICKEL SOCKET-WELDING, FITTINGS, AND UNIONS
A-A-59440-16 Base Document:2012 Valve, Angle, Shutoff, Water, Oil, and Gas (WOG)
MIL-D-82062 Revision C:1992 DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY
MIL V 18500 : B VALVE, REDUCING, COMPRESSED GAS
MIL-DTL-17840 Revision D:2018 Pump, Centrifugal, Close-Coupled, Navy Standard (for Surface Ships Application)
MSS SP 107 : 1991 TRANSITION UNION FITTINGS FOR JOINING METAL AND PLASTIC PRODUCTS
MSS SP 78 : 2011 GRAY IRON PLUG VALVES, FLANGED AND THREADED ENDS
ASTM F 1974:2009 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
AWWA C563 : 2014 FABRICATED COMPOSITE SLIDE GATES
MSS SP 25 : 2013 STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS
AWWA C712 : 2015 COLD-WATER METERS - SINGLEJET TYPE
AWWA C509 : 2015 RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
I.S. EN ISO 4126-2:2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - PART 2: BURSTING DISC SAFETY DEVICES
ASTM F 1245 : 1989 : R2001 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
ASTM F 1987 : 2001 : R2011 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
MIL-DTL-17901 Revision C:2005 Bearing Components, Bonded Synthetic Rubber, Water Lubricated
MSS SP 80 : 2013 BRONZE GATE, GLOBE, ANGLE, AND CHECK VALVES
MIL-PRF-43001 Revision G:2016 WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
MIL-DTL-24227 Revision A:2018 Fittings and Flanges, Cast Bronze, Silver-Brazing, Suitable for Ultrasonic Inspection
MIL V 24509 : A VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE
MIL-B-18558 Revision B:1988 Bearing, Propulsion Line Shaft, Oil Disc Lubricated
MIL-DTL-24044 Revision C:2013 FLANGES, COAXIAL LINE, RIGID, AIR DIELECTRIC, GENERAL SPECIFICATION FOR
MIL C 52404 : B CONNECTIONS: HOSE, FIRE AND WATER
A-A-2622 Revision A:1998 ADAPTERS, PIPE TO HOSE, STRAIGHT OR REDUCING
AWWA C502 : 2014 DRY-BARREL FIRE HYDRANTS
AWWA C513 : 2005 OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES
MIL-DTL-3390 Revision H:2011 RINGS, DEE
AWWA C700 : 2015 COLD-WATER METERS - DISPLACEMENT TYPE, METAL ALLOY MAIN CASE
MIL-DTL-1189 Revision E:2018 VALVE, GATE, BRONZE
MIL-DTL-17505 Revision G:2014 Hose and Hose Assembly, Rubber, Oil and Gasoline, Suction and Discharge
WW-T-696 Revision E:1984 TRAPS, STEAM
A-A-59553 Revision A:2012 COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE
ASTM F 1335 : 2004 Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011)
MIL-T-11372 Revision F:1991 TRIVET, SURVEYING INSTRUMENT
SAE J 462 : 2018 CAST COPPER ALLOYS
MIL-DTL-15743-4 Revision C:2007 SWITCHES, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOLS 805.1 (4PST), 857 (TPDT)
A-A-59440-6 Revision B:2012 Cock-Valve, Plug, Three-Way, Threaded Type, Brass, 125 PSI, NPTF-1 Threads, Water, Oil and Gas (WOG)
MIL-DTL-15743-1 Revision C:2007 SWITCH, ROTARY, ENCLOSED, SUBMERSIBLE (15 FEET), SNAP ACTION, 125 VOLTS ALTERNATING CURRENT, 10 AMPERE, SYMBOL 801.1 (DPST)
MS51845 Revision E:2015 ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEGREE, STRAIGHT, CLASS 125
CSA B79 : 2008 : R2013 COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS
B79-08 (R2018) Commercial and residential drains and cleanouts
CSA B 79 : 2008 COMMERCIAL AND RESIDENTIAL DRAINS AND CLEANOUTS
AWWA C515 : 2015 REDUCED-WALL, RESILIENT-SEATED GATE VALVES FOR WATER SUPPLY SERVICE
ASTM F 1986 : 2001 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
ASTM F 1987 : 2001 : R2006 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNI EN ISO 4126-2 : 2003 SAFETY DEVICES FOR PROTECTION AGAINST EXCESSIVE PRESSURE - BURSTING DISC SAFETY DEVICES
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASTM E 310 : 2015 : REDLINE Standard Reference Radiographs for Tin Bronze Castings
ASTM F 1245 : 1989 : R2006 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASME B16.33 : 2012 : R2017 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2)
ASME B16.33 : 2012 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN GAS PIPING SYSTEMS UPTO 175 PSI (SIZES NPS 1/2 THROUGH NPS 2)
CSA/ANSI LC 4 : 2012 : INC : ADD A : 2013 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASME B16.18 : 2012 Cast Copper Alloy Solder Joint Pressure Fittings (B16.18 - 2012)<br>
CSA/ANSI LC 4:2012 PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASME A112.6.1M : 1997 : R2008 FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE
ASME A112.6.1M : 1997 : R2012 FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE
ASME A112.6.1M : 1997 : R2002 FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE
ASME A112.14.1 : 2003 BACKWATER VALVES
CSA/ANSI LC 4-2012 (R2017)/CSA 6.32-2012 (R2016) PRESS-CONNECT METALLIC FITTINGS FOR USE IN FUEL GAS DISTRIBUTION SYSTEMS
ASME A112.14.1 : 2003 : R2008 BACKWATER VALVES
ASME B31.5 : 2016 REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS
ASME B16.15 : 2013 CAST COPPER ALLOY THREADED FITTINGS: CLASSES 125 AND 250
ASME B16.51 : 2013 Copper and Copper Alloy Press-Connect Pressure Fittings
ASME B16.23 : 2016 CAST COPPER ALLOY SOLDER JOINT DRAINAGE FITTINGS: DWV
ASME A112.6.3 : 2016 FLOOR AND TRENCH DRAINS
ASME B16.44 : 2012 : R2017 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI
ASME A112.14.1 : 2003 : R2017 BACKWATER VALVES
ASME B16.44 : 2012 MANUALLY OPERATED METALLIC GAS VALVES FOR USE IN ABOVEGROUND PIPING SYSTEMS UP TO 5 PSI
ASME B31.3 SPANISH : 2010 PROCESS PIPING
ASME A112.14.1 : 2003 : R2012 BACKWATER VALVES
ASME A112.6.1M : 1997 : R2017 FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE

ASTM B 66 : 2015 : REDLINE Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts
ASTM B 770 : 2015 : REDLINE Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
ASTM B 208 : 2014 : REDLINE Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings
ASTM B 763/B763M : 2015 : REDLINE Standard Specification for Copper Alloy Sand Castings for Valve Applications
ASTM B 806 : 2014 : REDLINE Standard Specification for Copper Alloy Permanent Mold Castings for General Applications
ASTM B 61 : 2015 : REDLINE Standard Specification for Steam or Valve Bronze Castings
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM B 824 : 2017 : REDLINE Standard Specification for General Requirements for Copper Alloy Castings
ASTM B 22/B22M : 2017 : REDLINE Standard Specification for Bronze Castings for Bridges and Turntables
ASTM B 846 : 2011-07 TERMINOLOGY FOR COPPER AND COPPER ALLOYS
ASTM B 67 : 2014 : REDLINE Standard Specification for Car and Tender Journal Bearings, Lined
ASTM B 62 : 2017 : REDLINE Standard Specification for Composition Bronze or Ounce Metal Castings
ASME PV CODE SET : 2017 BOILER AND PRESSURE VESSEL CODE - COMPLETE SET

$122.77
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more