Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

DEFSTAN 00-970(PT0)/15(2015) : 2015

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS

Available format(s)

Hardcopy , PDF

Superseded date

13-07-2015

Language(s)

English

Published date

01-01-2015

Preface
Section One - General
Section Two - Format of 00-970
Section Three - Use of 00-970
Section Four - Qualification of Equipment for Use
               on Aircraft
Section Five - Amendment Procedure
Section Six - Status of Issue
Annex A - Table of Contents
Annex B - Applicable NATO Standardization Agreements
          (STANAGs)
Annex C - Applicable UK Defence Standards
Annex D - US Military Specifications
Annex E - Other Related Specifications
Annex F - Definitions
Annex G - Suspect Text Reporting

Gives guidance and content information, together with definitions of the terms used throughout this document.

DevelopmentNote
Supersedes DEFSTAN 00-970(PT0)/14(2014). (03/2015)
DocumentType
Standard
Pages
73
PublisherName
UK Ministry of Defence Standards
Status
Superseded
SupersededBy
Supersedes

BS 381C:1996 Specification for colours for identification, coding and special purposes
MIL-STD-850 Revision B:1970 AIRCREW STATION VISION REQUIREMENTS FOR MILITARY AIRCRAFT
DEFSTAN 47-25/1(1982) : 1982 PIPELINES AND PIPE COUPLINGS FOR AIRCRAFT FLUID SYSTEMS (METRIC)
SAE AS 50571 B : 2016 LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR
BS EN 10202:2001 Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
SAE AMS I 7171 : 2011 Insulation Blanket, Thermal-Acoustical
BS 6221-20:1984 Printed wiring boards Guide for the assembly of printed wiring boards
MIL-A-8865 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY MISCELLANEOUS LOADS
ASTM D 3701 : 2017 : REDLINE Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry
BS 7867:1997 Specification for portable fire extinguishers for use in aircraft
MIL-PRF-83870 Revision C:2008 FILTER ELEMENT, DISPOSABLE, 20 MICRON ABSOLUTE, CONSTANT SPEED DRIVE, AIRCRAFT
MIL B 8075 : D BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF
STANAG 3370 : 2004 AIRCREW STATION ALERTING SYSTEMS
DEFSTAN 17-3/1(1972) : 1972 ADAPTORS, AIRCRAFT JACKING POINTS (DETACHABLE JACKING PADS)
STANAG 3456 : 0 AIRCRAFT ELECTRICAL POWER SYSTEM CHARACTERISTICS
MIL-STD-13231 Base Document:1999 MARKING OF ELECTRONIC ITEMS
MIL-I-6115 Revision A:1951 INSTRUMENT SYSTEMS, PITOT TUBE AND FLUSH STATIC PORT OPERATED, INSTALLATION OF
BS EN ISO 9809-3:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Normalized steel cylinders
ASTM B 80 : 2015 : REDLINE Standard Specification for Magnesium-Alloy Sand Castings
DEFSTAN 08-11/1(2000) : 2000 NBC PROTECTION FOR AIR PLATFORMS
DEFSTAN 03-11/5(2008) : 2008 PHOSPHATE TREATMENT OF IRON AND STEEL
STANAG 3303 : 86 AMD 5 CONNECTORS FOR 115/200 VOLTS, 400 HERTZ, 3 PHASE, AC SERVICING POWER
MIL-HDBK-505 Base Document:1998 DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS
STANAG 3217 : 2006 OPERATION OF CONTROLS AND SWITCHES AT AIRCREW STATIONS
STANAG 4671 : 2017 UNMANNED AIRCRAFT SYSTEMS AIRWORTHINESS REQUIREMENTS (USAR)
STANAG 3558 : 2002 LOCATION OF ELECTRICAL CONNECTORS FOR AIRCRAFT STORES
STANAG 3341 : 72 AMD 6 EMERGENCY CONTROL COLOUR SCHEMES
DEFSTAN 00-00/2(2014) : 2014 A STANDARD FOR DEFENCE STANDARDS: MANAGEMENT AND PRODUCTION
BS 2087-1:1992 Preservative textile treatments Specification for treatments
MIL-STD-1365 Revision C:2010 GENERAL DESIGN CRITERIA FOR HANDLING EQUIPMENT ASSOCIATED WITH WEAPONS AND RELATED ITEMS
MIL-HDBK-729 Base Document:1983 CORROSION & CORROSION PREVENTION METALS
MIL-I-8500 Revision D:1980 INTERCHANGEABILITY AND REPLACEABILITY OF COMPONENT PARTS FOR AEROSPACE VEHICLES
BS 4921:1988 Specification for sherardized coatings on iron or steel
MIL-STD-1530 Revision D:2016 AIRCRAFT STRUCTURAL INTEGRITY PROGRAM (ASIP)
STANAG 3368 : 2014 INTERNAL AIRCRAFT ENGINE STARTING SYSTEM
DEFSTAN 05-61/1(1983) : 1983 QUALITY ASSURANCE PROCEDURAL REQUIREMENTS
SAE AS 8090 : 2016 MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR
DEFSTAN 00-16/1(1984) : 1984 GUIDE TO THE ACHIEVEMENT OF QUALITY IN SOFTWARE
STANAG 3605 : 0 COMPATIBILITY OF ARMING SYSTEMS AND EXPENDABLE AIRCRAFT STORES
MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
DEFSTAN 03-5/3(1995) : 1995 AUTOCATALYTIC (ELECTROLESS) NICKEL COATING OF METALS
SAE AS 8700 : 1999 INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-A-46146 Revision B:1990 ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)
MIL-HDBK-273 Base Document:1983 SURVIVABILITY ENHANCEMENT, AIRCRAFT NUCLEAR WEAPON THREAT, DESIGN AND EVALUATION GUIDELINES
SAE ARP 1179 : 2011 AIRCRAFT GAS TURBINE ENGINE EXHAUST SMOKE MEASUREMENT
BS X 31:1967 Specification for low temperature stoving scheme for aeronautical purposes
MIL-C-16310 Revision D:1991 CYLINDER, COMPRESSED GAS (COMPRESSED AIR AND CARBON DIOXIDE, NONSHATTERABLE AND NONMAGNETIC)
MIL-F-8785 Revision C:1980 FLYING QUALITIES OF PILOTED AIRPLANES
RTCA DO 178 : C2011 SOFTWARE CONSIDERATIONS IN AIRBORNE SYSTEMS AND EQUIPMENT CERTIFICATION
BS G 175:1959 Aircraft fuel nozzle grounding plugs and sockets
MIL-HDBK-173 Revision A:1973 AUDIO EQUIPMENT
MIL-STD-704 Revision F:2004 AIRCRAFT ELECTRIC POWER CHARACTERISTICS
STANAG 3153 : 0 AIRCRAFT NAVIGATION AND ANTI-COLLISION LIGHTS
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
DEFSTAN 03-36/2(2010) : 2010 GUIDANCE TO THE USE OF CADMIUM ALTERNATIVES IN THE PROTECTIVE COATING OF DEFENCE EQUIPMENT
STANAG 3319 : 83 AMD 6 DIMENSIONS FOR CASES OF CONTROL BOXES, INSTRUMENTS AND PANEL MOUNTED EQUIPMENT
STANAG 3659 : 2002 ELECTRICAL BONDING REQUIREMENTS FOR METALLIC AIRCRAFT SYSTEMS
MIL-HDBK-1512 Base Document:1997 ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS
MIL-STD-101 Revision C:2014 COLOR CODE FOR PIPELINES AND FOR COMPRESSED GAS CYLINDERS
MIL-A-8863 Revision C:1993 AIRPLANE STRENGTH AND RIGIDITY GROUND LOADS FOR NAVY ACQUIRED AIRPLANES
MIL-E-22285 Base Document:1959 EXTINGUISHING SYSTEM, FIRE, AIRCRAFT, HIGH-RATE DISCHARGE TYPE, INSTALLATION AND TEST OF
AECTP-400 : 2006 MECHANICAL ENVIRONMENTAL TESTS
SAE J 1966 : 2011 LUBRICATING OILS, AIRCRAFT PISTON ENGINE (NON-DISPERSANT MINERAL OIL)
MIL I 18373 : B INSTRUMENT AND NAVIGATION EQUIPMENT, AIRCRAFT, INSTALLATION OF
DEFSTAN 59-113/2(2012) : 2012 LIGHTNING STRIKE PROTECTION REQUIREMENTS FOR SERVICE AIRCRAFT
BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes
MIL-S-22885-1 Revision J:2010 SWITCH, PUSH BUTTON, ILLUMINATED LENSES (SCREW-IN, T-1-3/4 MFB LAMP)
DEFSTAN 13-8/4(1978) : 1978 DIMENSIONAL REQUIREMENTS FOR AIRBORNE STORES, ASSOCIATED SUSPENSION AND RELEASE SYSTEMS AND ELECTRICAL CONTROL CONNECTIONS
DEFSTAN 81-24/5(2004) : 2004 IDENTIFICATION MARKING OF TRANSPORTABLE CONTAINERS, COMPRESSED GAS
MIL-HDBK-1763 Base Document:1998 AIRCRAFT/STORES COMPATIBILITY: SYSTEMS ENGINEERING DATA REQUIREMENTS AND TEST PROCEDURES
MIL-P-46111 Revision C:1978 PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT)
MIL-HDBK-728-4 Revision A:1993 MAGNETIC PARTICLE TESTING
DEFSTAN 00-10/3(1986) : 1986 AMD 2 1993 GENERAL DESIGN AND MANUFACTURING REQUIREMENTS FOR SERVICE ELECTRONIC EQUIPMENT
BS 2C 13:1988 Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)
AFGS-87219 Revision B:2012 ELECTRICAL POWER SYSTEMS, AIRCRAFT
DEFSTAN 03-14/4(2008) : 2008 ELECTRODEPOSITION OF CHROMIUM FOR ENGINEERING PURPOSES
MIL-D-23222 Revision A:1971 DEMONSTRATION REQUIREMENTS FOR HELICOPTERS
MIL-PRF-83860 Revision D:2013 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE
BS 5M 23:1987 Specification for an identification scheme for pipelines
DEFSTAN 05-18/5(2007) : 2007 SYMBOL MARKINGS OF SERVICING AND SAFETY/HAZARD POINTS ON AIRCRAFT, GROUND SUPPORT EQUIPMENT AND GUIDED WEAPONS SYSTEMS
STANAG 3104 : 2015 IDENTIFICATION OF AIRCRAFT AND MISSILE PIPELINES AND ELECTRICAL CONDUITS
MIL-STD-878 Revision B:2006 METHOD OF DIMENSIONING AND DETERMINING CLEARANCE FOR AIRCRAFT TIRES AND RIMS
DEFSTAN 61-7(PT2)/3(1991) : 1991 IDENTIFICATION OF ELECTRICAL AND ELECTRONIC SYSTEMS, WIRING AND COMPONENTS - PART 2: MARKING CODE FOR ELECTRICAL AND ELECTRONIC EQUIPMENT
SAE ARP 4418 : 2008 PROCEDURE FOR SAMPLING AND MEASUREMENT OF ENGINE AND APU GENERATED CONTAMINANTS IN BLEED AIR SUPPLIES FROM AIRCRAFT ENGINES
STANAG 3294 : 0 AIRCRAFT FUEL CAPS AND FUEL CAP ACCESS COVERS
MIL-PRF-27210 Revision J:2013 OXYGEN, AVIATOR'S BREATHING, LIQUID AND GAS
DEFSTAN 03-4/6(2011) : 2011 THE PRE-TREATMENT AND PROTECTION OF STEEL ITEMS OF SPECIFIED MAXIMUM TENSILE STRENGTH EXCEEDING 1450 MPA
SAE ARP 8615 : 2011 FUEL SYSTEM COMPONENTS: GENERAL SPECIFICATION FOR
STANAG 3315 : 1998 AIRCRAFT CABIN PRESSURIZING TEST CONNECTIONS
DEFSTAN 05-42/2(1982) : 1982 PARTICULATE CONTAMINATION CLASSES FOR FLUIDS IN HYDRAULIC SYSTEMS
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
DEFSTAN 00-600/3(2014) : 2014 INTEGRATED LOGISTIC SUPPORT - REQUIREMENTS FOR MOD PROJECTS
BS EN ISO 9809-1:2010 Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing Quenched and tempered steel cylinders with tensile strength less than 1100 MPa
STANAG 3542 : 2011 TECHNICAL CRITERIA FOR THE TRANSPORT OF CARGO BY HELICOPTER
STANAG 3701 : 0 AIRCRAFT INTERIOR COLOUR SCHEMES
MIL-HDBK-725 Base Document:1972 ADHESIVES - A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS
DEFSTAN 81-14/8(2013) : 2013 CASES, WOOD (BATTEN AND BOARD CONSTRUCTION)
MIL-A-87229 Base Document:1985 AUXILIARY POWER SYSTEMS, AIRBORNE
MIL-E-85583 Revision A:1987 ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR
SAE ARP 4754 : 2010 GUIDELINES FOR DEVELOPMENT OF CIVIL AIRCRAFT AND SYSTEMS
DEFSTAN 00-3/4(2011) : 2011 DESIGN GUIDANCE FOR THE TRANSPORTABILITY OF EQUIPMENT
MIL-STD-2073-1 Revision E:2008 STANDARD PRACTICE FOR MILITARY PACKAGING
BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions
MIL-T-81259 Revision B:1991 TIE DOWN, AIRFRAME DESIGN, REQUIREMENTS FOR
MIL-PRF-5425 Revision E:1998 PLASTIC SHEET, ACRYLIC, HEAT RESISTANT
MIL-HDBK-244 Revision A:1990 GUIDE TO AIRCRAFT - STORES COMPATIBILITY
DEFSTAN 00-34/1(1986) : 1986 AMD 1 1990 STANDARD SYMBOLOGY FOR AUTOMATIC IDENTIFICATION MARKING - BAR CODE 39
DEFSTAN 03-10/2(1987) : 1987 ELECTRO-DEPOSITION OF NICKEL AND CHROMIUM
STANAG 3312 : 0 PROFILE DIMENSIONS OF FLANGES FOR V-BAND COUPLINGS FOR PIPING AND DUCTING
BS 4F 68:2002 Controlled storage of vulcanized rubbers for use in aerospace applications
NF EN 1803 : 2002 TRANSPORTABLE GAS CYLINDERS - PERIODIC INSPECTION AND TESTING OF WELDED CARBON STEEL GAS CYLINDERS
MIL-T-7743 Revision F:1993 TESTING, STORE SUSPENSION AND RELEASE EQUIPMENT, GENERAL SPECIFICATION FOR
MIL-STD-8651 Base Document:1997 INSTALLATION OF IDENTIFICATION AND MODIFICATION PLATES (FOR AIRCRAFT)
DEFSTAN 07-55(PT1)/1(1975) : 1975 AMD 3 1983 ENVIRONMENTAL TESTING OF SERVICE MATERIAL - PART 1: GENERAL REQUIREMENTS
MIL-STD-2218 Base Document:1992 THERMAL DESIGN, ANALYSIS & TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT
MIL A 5498 : D ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT
MIL S 25073 : 0
DEFSTAN 03-13/1(1977) : 1977 GUIDE FOR THE PREVENTION OF CORROSION OF METAL CAUSED BY VAPOUR FROM ORGANIC MATERIALS
STANAG 3278 : 2014 AIRCRAFT TOWING ATTACHMENTS AND DEVICES
SAE AMS R 83283 : 2014 RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE
MIL-DTL-83054 Revision C:2003 BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK
AFGS-87139 Revision B:2013 LANDING GEAR SYSTEMS
MIL-C-18244 Revision A:1962 CONTROL AND STABILIZATION SYSTEMS, AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR
DEFSTAN 01-5/17(2011) : 2011 FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS
DEFSTAN 49-2/2(1975) : 1975 AMD 3 LUBRICATING GUNS, HAND AND GUNS, FLUID, DIRECT DELIVERY
BS EN 22063:1994 Metallic and other inorganic coatings. Thermal spraying. Zinc, aluminium and their alloys
SAE AS 25050B : 2017 COLORS, AERONAUTICAL LIGHTS AND LIGHTING EQUIPMENT, GENERAL REQUIREMENTS FOR
DEFSTAN 00-29/1(1982) : 1982 FUNGAL CONTAMINATION AFFECTING THE DESIGN OF MILITARY MATERIAL
STANAG 3372 : 2014 LOW PRESSURE AIR AND ASSOCIATED ELECTRICAL CONNECTIONS FOR AIRCRAFT ENGINE STARTING
MIL-B-8584 Revision C:1970 BRAKE SYSTEMS, WHEEL, AIRCRAFT, DESIGN OF
MIL-STD-31000 Revision A:2013 Technical Data Packages
DEFSTAN 05-43/1(1977) : 1977 STANDARD PROCEDURES FOR TAKING SAMPLES OF HYDRAULIC FLUIDS FOR EVALUATION OF PARTICULATE CONTAMINATION
MIL-B-81365 Base Document:1966 BLEED AIR SYSTEMS, GENERAL SPECIFICATIONS FOR
DEFSTAN 59-71/1(1988) : 1988 AMD 1 1990 CRIMPED ELECTRICAL CONNECTIONS FOR COPPER CONDUCTORS - GENERIC SPECIFICATION
ASTM D 6576 : 2013 : REDLINE Standard Specification for Flexible Cellular Rubber Chemically Blown
JSSG-2000 Revision B:2004 AIR SYSTEM
MIL-L-6723 Revision C:1987 LIGHT, AIRCRAFT, GENERAL SPECIFICATION FOR
STANAG 3492 : 0 CLAMPS, MOUNTING (IMPERIAL AND METRIC) FOR AIRCRAFT INSTRUMENTS
STANAG 3643 : 0 COATING REFLECTION REDUCING FOR GLASS ELEMENTS USED IN AIRCREW STATION DISPLAYS
MIL-P-85573 Base Document:1983 POWER UNIT AIRCRAFT AUXILIARY, GAS TURBINE, GENERAL SPECIFICATION FOR
DEFSTAN 03-24/5(2008) : 2008 CHROMIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
DEFSTAN 05-56/1(1980) : 1980 GRAPHICAL SYMBOLS FOR AIRCRAFT HYDRAULIC AND PNEUMATIC SYSTEMS
JSSG-2007 Base Document:1998 JOINT SERVICE SPECIFICATION GUIDE - ENGINES, AIRCRAFT, TURBINE
DEFSTAN 15-2/1(1987) : 1987 FLEXIBLE TANKS FOR USE IN AIRCRAFT FUEL AND METHANOL/WATER SYSTEMS
MIL-A-8869 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY NUCLEAR WEAPONS EFFECTS
BS EN ISO 9241-1:1997 Ergonomic requirements for office work with visual display terminals (VDTs) General introduction
MIL-PRF-83861 Revision D:2013 FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE
MIL-DTL-23227 Revision F:1997 TUBE AND PIPE, NICKEL-CHROMIUM-IRON ALLOY (UNS N06600)
BS 7195(1989) : 1989 GUIDE FOR PREVENTION OF CORROSION OF METALS CAUSED BY VAPOURS FROM ORGANIC MATERIALS
MIL-DTL-25959 Revision H:2012 TIE DOWN, TENSIONERS, CARGO, AIRCRAFT
MIL-STD-46855 Revision A:2011 HUMAN ENGINEERING REQUIREMENTS FOR MILITARY SYSTEMS, EQUIPMENT, AND FACILITIES
DEFSTAN 00-44/2(2012) : 2012 RELIABILITY AND MAINTAINABILITY DATA COLLECTION AND CLASSIFICATION
BS 7863:2009 Recommendations for colour coding to indicate the extinguishing media contained in portable fire extinguishers
DEFSTAN 03-3/5(2011) : 2011 PROTECTION OF ALUMINIUM ALLOYS BY SPRAYED METAL COATINGS
STANAG 3525 : 0 SAFETY DESIGN REQUIREMENTS - AIRBORNE FUZING SYSTEMS
STANAG 3639 : 2004 AIRCREW STATION DIMENSIONAL DESIGN FACTORS
BS EN 2127:1992 Aluminium alloy AL-P7075-T73511. Extruded bars and sections a or D ≤ 100 mm
DEFSTAN 61-15/3(1990) : 1990 AMD 1 1991 PRECAUTIONS AGAINST ELECTRICAL SHOCK IN MAINTENANCE AREAS
BS EN 1803:2002 Transportable gas cylinders. Periodic inspection and testing of welded carbon steel gas cylinders
JSSG-2010 Base Document:1998 Crew Systems
BS 2C 7:1984 Specification for aircraft tyre valves: interchangeability dimensions
STANAG 3302 : 81 AMD 5 CONNECTORS FOR 28 VOLT "DC" SERVICING POWER
STANAG 3220 : 74 AMD 6 LOCATION, ACTUATION AND SHAPE OF AIRFRAME CONTROLS FOR FIXED WING AIRCRAFT
STANAG 4324 : 2007 ELECTROMAGNETIC RADIATION HAZARD ASSESSMENT AND TESTING OF MUNITIONS AND ASSOCIATED SYSTEMS
MIL-HDBK-2164 Revision A:1996 ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT
STANAG 4360 : 2012 SPECIFICATION FOR PAINT SYSTEMS, RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT
ASTM B 584 : 2014 : REDLINE Standard Specification for Copper Alloy Sand Castings for General Applications
SAE AS 18802 : 2013 FUEL AND OIL LINES, AIRCRAFT, INSTALLATION OF
STANAG 3865 : 2009 PHYSIOLOGICAL REQUIREMENTS FOR AIRCRAFT MOLECULAR SIEVE OXYGEN CONCENTRATING SYSTEMS
SAE AS 6144 : 2011 SOUND AND THERMAL INSULATION FOR AIRCRAFT - GENERAL SPECIFICATION FOR THE INSTALLATION OF
BS G 262:1998 Aircraft. Declaration of design and performance for aircraft equipment. Standard form
MIL-L-85314 Revision A:1983 LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR
MIL-STD-1760 Revision E:2007 AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
DEFSTAN 17-4/3(1986) : 1986 PICKETING (TIE-DOWN) FITTINGS FOR SHIPBORNE AIRCRAFT (INCLUDING HELICOPTERS)
MIL-HDBK-2089 Base Document:1997 AIRCRAFT SURVIVABILITY TERMS
MIL-G-5485 Revision D:1993 GLASS; LAMINATED, FLAT, BULLET RESISTANT
MIL-HDBK-781 Revision A:1996 RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION
MIL-I-8672 Revision B:1969 INSTALLATION AND TEST OF AIRCRAFT PYROTECHNIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR [ASG]
BS 2C 4:1973 Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections
SAE AS 5440 : 2011 HYDRAULIC SYSTEMS, AIRCRAFT, DESIGN AND INSTALLATION REQUIREMENTS FOR
MIL-DTL-7905 Revision H:2003 CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI
SAE AS 8091 : 2014 AIRCRAFT JACKING PADS ADAPTERS AND SOCKETS DESIGN AND INSTALLATION OF
MIL-HDBK-275 Revision A:1976 GUIDE FOR SELECTION OF LUBRICANTS, FLUIDS AND COMPOUNDS FOR USE IN FLIGHT VEHICLES AND COMPONENTS
MIL-E-7016 Revision F:1976 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT ANALYSIS OF
MIL-STD-411 Revision F:1997 AIRCREW STATION ALERTING SYSTEMS
STANAG 4236 : 2007 LIGHTNING ENVIRONMENT
MIL-STD-8591 Base Document:2005 AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE)
SAE ARP 1256 : 2011 PROCEDURE FOR THE CONTINUOUS SAMPLING AND MEASUREMENT OF GASEOUS EMISSIONS FROM AIRCRAFT TURBINE ENGINES
BS 5852:2006 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources
MIL-DTL-6162 Revision C:2000 GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR
NASM 25049 : REV 1 KNOBS, CONTROL, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
STANAG 3416 : 0 METHANOL/WATER AND DEMINERALIZED WATER REPLENISHMENT
AECTP-500 : 2016 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION
DEFSTAN 03-8/2(1992) : 1992 ELECTRO-DEPOSITION OF TIN
MIL-HDBK-454 Revision B:2007 GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
MIL-STD-889 Revision C:2016 DISSIMILAR METALS
DEFSTAN 16-23/2(1982) : 1982 FLOOR FITTINGS FOR CARGO TRANSPORT AIRCRAFT APERTURES FOR TIE-DOWN POINTS
STANAG 3400 : 2010 RESTRAINT OF CARGO IN FIXED WING AIRCRAFT
MIL-STD-1788 Revision A:1985 AVIONICS INTERFACE DESIGN STANDARD
BS G 212:1971 Specification for general requirements for aircraft electrical cables
MIL-D-21625 Revision G:1993 DESIGN AND EVALUATION OF CARTRIDGES FOR CARTRIDGE ACTUATED DEVICES
BS 5045-7:2000 Transportable gas containers Specification for seamless steel gas containers of water capacity 0.5 L up to 15 L for special portable applications
MIL E 5400 : T ELECTRONIC EQUIPMENT, AEROSPACE, GENERAL SPECIFICATION FOR
STANAG 3237 : 1997 APERTURE OF TERMINAL RING OR LINK OF AIRCRAFT LIFTING SLINGS
BS EN ISO 14001:2015 Environmental management systems. Requirements with guidance for use
MIL-HDBK-728-2 Base Document:1985 EDDY CURRENT TESTING
MIL-STD-7080 Base Document:1994 SELECTION & INSTALLATION OF AIRCRAFT ELECTRIC EQUIPMENT
SAE ARP 1533 : 2016 PROCEDURE FOR THE ANALYSIS AND EVALUATION OF GASEOUS EMISSIONS FROM AIRCRAFT ENGINES
SAE AS 1933 : 2013 AGE CONTROLS FOR HOSE CONTAINING AGE-SENSITIVE ELASTOMERIC MATERIAL
STANAG 3800 : 2001 NIGHT VISION IMAGING SYSTEM (NVIS) INTERIOR LIGHTING COMPATIBILITY DESIGN CRITERIA
STANAG 3334 : 96 AMD 1 DEFUELLING OF AIRCRAFT
MIL-P-9400 Revision C:1991 PLASTIC LAMINATE AND SANDWICH CONSTRUCTION PARTS, AIRCRAFT STRUCTURAL PROCESS SPECIFICATION REQUIREMENTS
SAE ARP 492 : 2014 AIRCRAFT ENGINE FUEL PUMP CAVITATION ENDURANCE TEST
SAE AMS A 25463 : 2013 ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION
DEFSTAN 47-12/4(1987) : 1987 POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES (WIRE REINFORCED) FOR MEDIUM AND HIGH PRESSURE FLUID SYSTEMS IN AIRCRAFT
IEC TS 62239-1:2015 Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan
MIL-I-8671 Revision D:1994 INSTALLATION OF DROPPABLE STORES AND ASSOCIATED RELEASE SYSTEMS
STANAG 3323 : 0 PIPE (TUBE) CONNECTIONS TO AIRCRAFT INSTRUMENTS (IMPERIAL AND METRIC)
MIL-W-81752 Revision A:1987 WINDSHIELDED SYSTEM, FIXED WING AIRCRAFT - GENERAL SPECIFICATION FOR
MIL-PRF-5480 Revision H:2015 DATA, ENGINEERING AND TECHNICAL: REPRODUCTION
DEFSTAN 15-3 : LATEST TRANSPARENT GLAZING MATERIALS AND ACCESSORIES FOR AEROSPACE APPLICATIONS
STANAG 3647 : 0 NOMENCLATURE IN AIRCREW STATIONS
DEFSTAN 81-46/3(2005) : 2005 BOARD, CORRUGATED, DOUBLE-FACED (TYPES A, B AND C)
SAE ARP 4761 : 1996 GUIDELINES AND METHODS FOR CONDUCTION THE SAFETY ASSESSMENT PROCESS ON CIVIL AIRBORNE SYSTEMS AND EQUIPMENT
ASTM D 3983 : 1998 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
SAE AMS P 83310 : 2016 PLASTIC SHEET, POLYCARBONATE, TRANSPARENT
STANAG 2133 : 2004 VULNERABILITY ANALYSIS OF CHEMICAL AND BIOLOGICAL HAZARDS
MIL-D-19326 Revision H:1990 DESIGN AND INSTALLATION OF LIQUID OXYGEN SYSTEMS IN AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-DTL-23659 Revision F:2010 Initiators, Electric, General Design Specification for
DEFSTAN 00-41/3(1993) : 1993 RELIABILITY AND MAINTAINABILITY MOD GUIDE TO PRACTICES AND PROCEDURES
DEFSTAN 00-31/1(1987) : 1987 THE DEVELOPMENT OF SAFETY CRITICAL SOFTWARE FOR AIRBORNE SYSTEMS
DEFSTAN 08-5/1(1984) : 1984 ADDENDUM 1998 DESIGN REQUIREMENTS FOR WEAPON SYSTEMS (GUIDED WEAPONS, TORPEDOES AND AIRBORNE ARMAMENT STORES)
MIL-E-18927 Revision E:1983 ENVIRONMENTAL CONTROL SYSTEMS, AIRCRAFT, GENERAL REQUIREMENTS FOR
STANAG 3230 : 2007 EMERGENCY MARKINGS ON AIRCRAFT
DEFSTAN 80-143/2(2006) : 2006 CORROSION PREVENTIVE, AUTOMOTIVE, UNDERBODY AND HOLLOW SECTION: JOINT SERVICE DESIGNATION: PX-28
MIL-PRF-27260 Revision D:2013 TIE DOWN, CARGO, AIRCRAFT CGU-1/B
SAE AS 85075 : 2000 TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR
BS 5599:1993 Specification for hard anodic oxidation coatings on aluminium and its alloys for engineering purposes
SAE ARP 5316 : 2014 STORAGE OF ELASTOMER SEALS AND SEAL ASSEMBLIES WHICH INCLUDE AN ELASTOMER ELEMENT PRIOR TO HARDWARE ASSEMBLY
AECTP-100 : 2016 ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL
DEFSTAN 66-27/1(1978) : 1978 AMD 1 PRESSURE CONNECTIONS ON AIRCRAFT INSTRUMENTS AND ASSOCIATED EQUIPMENT
STANAG 7187 : 2015 ON BOARD OXYGEN GENERATING SYSTEMS (OBOGS) PERFORMANCE STANDARDS
MIL-HDBK-2124 Base Document:2000 FLIGHT DATA RECORDER FUNCTIONAL STANDARDS FOR
DEFSTAN 00-971/1(1987) : 1987 GENERAL SPECIFICATION FOR AIRCRAFT GAS TURBINE ENGINES
DEFSTAN 05-10/4(1990) : 1990 DRAWING PROCEDURE
DEFSTAN 03-7/1(1973) : 1973 PAINTING OF METAL AND WOOD
STANAG 3611 : 73 AMD 4 CHARACTERISTICS OF COMPRESSED BREATHING AIR FOR AIRCRAFT USE
STANAG 4235 : 0 ELECTROSTATIC ENVIRONMENTAL CONDITIONS AFFECTING THE DESIGN OF MATERIEL FOR USE BY NATO FORCES
STANAG 3499 : 0 CHARACTERISTICS OF SUPPLY EQUIPMENT FOR LIQUID OXYGEN
MIL-HDBK-337 Base Document:1982 ADHESIVE BONDED AEROSPACE STRUCTURE REPAIR
MIL-PRF-8184 Revision F:1998 PLASTIC SHEET, ACRYLIC MODIFIED
BS EN 1968:2002 Transportable gas cylinders. Periodic inspection and testing of seamless steel gas cylinders
MIL-HDBK-83377 Base Document:1997 Adhesive Bonding (Structural) for Aerospace and Other Systems, Requirements for
SAE AS 18259 : 1997 INSTALLATION OF WINDOW ANTI-ICING, DE-GREASING AND WASHING SYSTEMS (GENERAL SPECIFICATION FOR)
STANAG 3692 : 76 AMD 4 LOCATION AND ACTUATION OF THRUST VECTOR CONTROLS FOR VSTOL AIRCRAFT OTHER THAN ROTARY WING AIRCRAFT
MIL-HDBK-1812 Base Document:1997 TYPE DESIGNATION, ASSIGNMENT AND METHOD FOR OBTAINING
MIL-F-17874 Revision B:1965 FUEL SYSTEMS, AIRCRAFT, INSTALLATION AND TEST OF
DEFSTAN 03-26/2(1988) : 1988 HARD ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
MIL-T-5842 Revision B:1985 TRANSPARENT AREAS ON AIRCRAFT SURFACES [WINDSHIELDS AND CANOPIES] RAIN REMOVING AND WASHING SYSTEMS FOR, DEFROSTING, DEICING, DEFOGGING, GENERAL SPECIFICATION FOR
MIL-PRF-28800 Revision F:1996 TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR
MIL-PRF-5503 Revision G:2013 ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
BS 2569-2:1965 Specification for sprayed metal coatings Protection of iron and steel against corrosion and oxidation at elevated temperatures.
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
ASTM D 4529 : 2017 : REDLINE Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
MIL-HDBK-336-2 Base Document:1983 SURVIVABILITY, AIRCRAFT, NONNUCLEAR, AIRFRAME - VOLUME 2
DEFSTAN 16-21/2(1986) : 1986 AMD 1 1986 MARKING OF AIRCRAFT HYDRAULIC COMPONENTS
MIL-P-6992 Base Document:1950 PUMP ASSEMBLY, FUEL, ELECTRICALLY DRIVEN, AIRCRAFT HEATER
STANAG 3575 : 0 AIRCRAFT STORES EJECTOR RACKS
MIL-L-8552 Revision C:1965 LANDING GEAR, AIRCRAFT SHOCK ABSORBER [AIR OIL TYPE]
IPC 2221B:2012 GENERIC STANDARD ON PRINTED BOARD DESIGN
DEFSTAN 61-7(PT1)/6(1990) : 1990 IDENTIFICATION OF ELECTRICAL AND ELECTRONIC SYSTEMS, WIRING AND COMPONENTS - PART 1: COLOUR CODING AND MARKING FOR POLARITY AND PHASE DISTINCTION IN ELECTRICAL SYSTEMS
MIL-E-5007 Revision D:1973 ENGINE, AIRCRAFT, TURBOJET AND TURBOFAN, GENERAL SPECIFICATION FOR
MIL-HDBK-17-4 Revision A:2002 Composite Materials Handbook - Volume 4 Metal Matrix Composites
STANAG 3224 : 2005 AIRCRAFT INTERIOR AND EXTERIOR LIGHTING NIGHT VISION GOGGLE (NVG) AND NON-NVG COMPATIBLE
DEFSTAN 66-7(PT1)/3(1983) : 1983 AMD 1 1985 INSTRUMENTS, ELECTRICAL INDICATING (SEALED) 50 MM TO 100 MM - PART 1: SPECIFICATION
AFGS-87154 Revision A:1992 FUEL SYSTEMS, GENERAL DESIGN SPECIFICATION FOR
BS 5X 17(1998) : 1998 SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES
JSSG-2001 Revision B:2004 Air Vehicle
MIL-STD-1290 Revision A:1988 LIGHT FIXED & ROTARY-WING AIRCRAFT CRASH RESISTANCE
MIL-PRF-32070 Revision A:2012 TEST PROGRAM SETS
DEFSTAN 03-18/5(2012) : 2012 CHROMATE CONVERSION COATINGS (CHROMATE FILMING TREATMENTS) GRADES: STANDARD AND BRUSHING FOR ALUMINIUM AND ALUMINIUM ALLOYS
STANAG 3221 : 77 AMD 7 AUTOMATIC FLIGHT CONTROL SYSTEM (AFCS) IN AIRCRAFT DESIGN STANDARDS AND LOCATION OF CONTROLS
MIL-L-81174 Revision A:1993 LIGHT LANDING, AIRCRAFT RETRACTABLE
MIL-S-8812 Revision D:1975 STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR
MIL-STD-882 Revision E:2012 System Safety
MIL-C-8779 Revision E:1988 COLOR, INTERIOR, AIRCRAFT, REQUIREMENTS FOR
MIL-H-5484 Revision C:1964 Heater, Aircraft, Combustion Type
SAE AS 5778 : 1997 COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR
STANAG 4327 : 0 LIGHTNING, MUNITION ASSESSMENT AND TEST PROCEDURES
BS 3G 230:2000 Specification for general requirements for aircraft electrical cables (second series)
MIL-M-8609 Revision B:1965 MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR
BS EN 1802:2002 Transportable gas cylinders. Periodic inspection and testing of seamless aluminium alloy gas cylinders
MIL-STD-461 Revision G:2015 REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT
MIL-HDBK-2165 Base Document:1995 Testability Program for Systems and Equipments
STANAG 4145 : 1991 NUCLEAR SURVIVABILITY CRITERIA FOR ARMED FORCES MATERIEL AND INSTALLATIONS - AEP-4
SAE AS 7413 : 2001(S2019) COUPLING ASSEMBLIES, QUICK DISCONNECT, AUTOMATIC SHUTOFF
MIL-HDBK-268 Base Document:1982 SURVIVABILITY ENHANCEMENT, AIRCRAFT CONVENTIONAL WEAPON THREATS, DESIGN & EVALUATION GUIDELINES
STANAG 3747 : 2016 GUIDE SPECIFICATIONS (MINIMUM QUALITY STANDARDS) FOR AVIATION TURBINE FUELS (F-24, F-27, F-34, F-35, F-37, F-40 AND F-44)
BS 2G 199:1984 Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration
DEFSTAN 68-284/3(2009) : 2009 COMPRESSED BREATHING GASES FOR AIRCRAFT, DIVING AND MARINE LIFE-SUPPORT APPLICATIONS
MIL-R-8236 Revision F:1995 REEL, SHOULDER HARNESS, INERTIA LOCK
MIL-DTL-5578 Revision D:2008 TANKS, FUEL, AIRCRAFT, SELF-SEALING
STANAG 7139 : 0 AIRCRAFT ENGINE CONTROLS, SWITCHES, DISPLAYS, INDICATORS, GAUGES AND ARRANGEMENTS
DEFSTAN 95-7/2(2004) : 2004 WIRE FOR LOCKING PURPOSES AND WIRE LOCKING PRACTICE FOR AEROSPACE USE
DEFSTAN 03-2/6(2011) : 2011 CLEANING AND PREPARATION OF METAL SURFACES
MIL-HDBK-87213 Revision A:2005 ELECTRONICALLY/OPTICALLY GENERATED AIRBORNE DISPLAYS
MIL T 5041 : J TIRE, PNEUMATIC, AIRCRAFT
MIL-PRF-24021 Revision K:1998 ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT
AECTP-200 : 2009 ENVIRONMENTAL CONDITIONS
BS 4M 45-1:1998 Aircraft tyres and rims Specifications
MIL-F-25173 Revision A:1956 FASTENER, CONTROL PANEL, AIRCRAFT EQUIPMENT
DEFSTAN 61-10/4(1984) : 1984 GENERATOR SETS (GROUND, ENGINE DRIVEN)
MIL-HDBK-728-3 Base Document:1985 LIQUID PENETRANT TESTING
DEFSTAN 05-13/2(1991) : 1991 MARKS IDENTIFYING METRIC FEATURES OF EQUIPMENT AND PARTS
MIL-DTL-6396 Revision F:2008 TANKS, FUEL, OIL, COOLING FLUIDS, INTERNAL, REMOVABLE NON-SELF-SEALING
MIL-D-81641 Base Document:1972 DISPLAY, HEAD UP, GENERAL SPECIFICATION FOR
MIL-HDBK-131 Revision A:1966 IDENTIFICATION MARKINGS FOR FASTENERS
BS ISO 10074:2010 Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
STANAG 3317 : 71 AMD 8 AIRCRAFT ELECTRICAL CABLES
DEFSTAN 03-25/5(2008) : 2008 SULFURIC ACID ANODIZING OF ALUMINIUM AND ALUMINIUM ALLOYS
STANAG 3208 : 2009 AIR CONDITIONING CONNECTIONS
SAE AMS G 25871 : 2016 GLASS, LAMINATED, AIRCRAFT GLAZING
BS 4C 14:1991 Specification for aircraft pressure refuelling connectors
STANAG 4155 : 0 NCB PROTECTIVE MASK AND FILTER CANNISTER SCREW THREADS
ASTM E 2375 : 2016 : REDLINE Standard Practice for Ultrasonic Testing of Wrought Products
MIL-HDBK-728-6 Base Document:1985 ULTRASONIC TESTING
ASTM E 1444 : 2005 Standard Practice for Magnetic Particle Testing
STANAG 4702 : 2016 ROTARY WING UNMANNED AIRCRAFT SYSTEMS AIRWORTHINESS REQUIREMENTS
MIL-A-8867 Revision C:1987 AIRPLANE STRENGTH AND RIGIDITY GROUND TESTS
SAE AS 18276 : 2014 LIGHTING, AIRCRAFT INTERIOR, INSTALLATION OF
BS ISO 461-1:2003 Aircraft. Connectors for ground electrical supplies Design, performance and test requirements
STANAG 3198 : 2017 FUNCTIONAL REQUIREMENTS OF AIRCRAFT OXYGEN EQUIPMENT AND PRESSURE SUITS
STANAG 4703 : 2016 LIGHT UNMANNED AIRCRAFT SYSTEMS AIRWORTHINESS REQURIEMENTS
MIL PRF 5041 : K TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT
MIL-A-8861 Revision B:1986 AIRPLANE STRENGTH AND RIGIDITY FLIGHT LOADS
SAE AS 5604 : 2012 COMPASS: MAGNETIC, PILOT'S STANDBY
DEFSTAN 16-24/1(1983) : 1983 SHAPES OF AIRFRAME AND ENGINE CONTROL HANDLES AND KNOBS IN FIXED WING AIRCRAFT
STANAG 3766 : 2017 GREASE NIPPLES
STANAG 3632 : 0 AIRCRAFT AND GROUND SUPPORT EQUIPMENT ELECTRICAL CONNECTIONS FOR STATIC GROUNDING
MIL-STD-2131 Revision A:1991 LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL-STD-7179 Revision A:2009 Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment
MIL-PRF-22885 Revision J:2016 Switches, Push Button, Illuminated, General Specification for
SAE AS 8775 : 1998 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES, GENERAL SPECIFICATION FOR
MIL-STD-2089 Base Document:1981 AIRCRAFT NONNUCLEAR SURVIVABILITY TERMS
DEFSTAN 05-65/1(1984) : 1984 RADIOGRAPHIC INSPECTION
BS EN 971-1:1996 Paints and varnishes. Terms and definitions for coating materials General terms
SAE AS 18012 : 1998 MARKINGS FOR AIRCREW STATION DISPLAYS DESIGN AND CONFIGURATION OF
STANAG 3447 : 2016 AIR-TO-AIR (AERIAL) REFUELLING EQUIPMENT: PROBE-DROGUE INTERFACE CHARACTERISTICS
BS SP115-117(1956) : 1956 SPECIFICATIONS FOR HYDRAULIC SURFACE-CHECK TYPE LUBRICATING NIPPLES FOR AIRCRAFT
MIL-F-23447 Base Document:1962 FIRE WARNING SYSTEMS, AIRCRAFT, RADIATION SENSING TYPE, TEST AND INSTALLATION OF
DEFSTAN 80-161/2(2002) : 2002 PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK
DEFSTAN 59-31/2 : LATEST LIGHTING PROTECTION
SAE AS 35411 : 2010 FITTINGS, LUBRICATION
MIL-S-8512 Revision D:1974 SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF
STANAG 4270 : 0 AVIATION FUEL DESIGN PARAMETER FOR FUTURE NATO LAND BASED TURBINE POWERED MILITARY AIRCRAFT
SAE AS 50881 : 2015 WIRING AEROSPACE VEHICLE
JSSG-2009 Revision A:2013 Air Vehicle Subsystems
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
MIL-PRF-25690 Revision B:1993 PLASTIC, SHEET AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT
DEFSTAN 00-55(PT1)/3(2014) : 2014 REQUIREMENTS FOR SAFETY OF PROGRAMMABLE ELEMENTS (PE) IN DEFENCE SYSTEMS - PART 1: REQUIREMENTS AND GUIDANCE
DEFSTAN 00-49/3(2014) : 2014 MOD GUIDE TO R&M TERMINOLOGY USED IN REQUIREMENTS
BS 2G 219:1983 Specification for general requirements for ground support electrical supplies for aircraft
MIL-M-8650 Revision C:1976 Mockups, Aircraft, General Specification for
STANAG 7106 : 2015 CHARACTERISTICS OF GASEOUS BREATHING OXYGEN, LIQUID BREATHING OXYGEN AND SUPPLY PRESSURES, HOSES AND REPLENISHMENT COUPLINGS
DEFSTAN 80-214/3(2009) : 2009 PAINT, FINISH, SELECTIVELY STRIPPABLE, ACRYLIC - TYPES: BRUSHING, SPRAYING
MIL-STD-322 Revision B:1984 Explosive Components, Electrically Initiated, Basic Evaluation Tests for
MIL-STD-1366 Revision E:2006 INTERFACE STANDARD FOR TRANSPORTABILITY CRITERIA
STANAG 3359 : 85 AMD 4 LOCATION AND ARRANGEMENT OF ENGINE DISPLAYS IN AIRCRAFT
MIL-W-6729 Revision C:1993 WATERTIGHTNESS OF AIRCRAFT, GENERAL SPECIFICATION FOR
STANAG 3705 : 0 HUMAN ENGINEERING DESIGN CRITERIA FOR CONTROLS AND DISPLAYS IN AIRCREW STATIONS
MIL F 8815 : D FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR
MIL-STD-962 Revision D:2003 DEFENSE STANDARDS FORMAT AND CONTENT
MIL-HDBK-728-1 Base Document:1985 NONDESTRUCTIVE TESTING
SAE AMS F 7190 : 2016 FORGING, STEEL, FOR AIRCRAFT/AEROSPACE EQUIPMENT AND SPECIAL ORDNANCE APPLICATIONS
BS 2G 135:1967 Specification for electrically-heated pitot and pitotstatic pressure heads
MIL-HDBK-838 Base Document:1997 LUBRICATION OF MILITARY EQUIPMENT
DEFSTAN 13-91/2(1981) : 1981 AMD 2 MECHANICAL ARMING WIRE CONNECTIONS BETWEEN AIRBORNE ARMAMENT STORES AND ASSOCIATED SUSPENSION EQUIPMENT
BS ISO 3324-1:2013 Aircraft tyres and rims Specifications
MIL-DTL-18307 Revision H:2006 NOMENCLATURE AND IDENTIFICATION FOR AERONAUTICAL SYSTEMS INCLUDING JOINT ELECTRONICS TYPE DESIGNATED SYSTEMS AND ASSOCIATED SUPPORT SYSTEMS
MIL-STD-1474 Revision E:2015 NOISE LIMITS
STANAG 3441 : 2007 DESIGN OF AIRCRAFT STORES
MIL-HDBK-310 Base Document:1997 DEPARTMENT OF DEFENSE HANDBOOK - GLOBAL CLIMATIC DATA FOR DEVELOPING MILITARY PRODUCTS
MIL-P-15024-5 Base Document:1971 PLATE, IDENTIFICATION
DEFSTAN 00-55(PT2)/2(1997) : 1997 ERRATUM 1997 REQUIREMENTS FOR SAFETY RELATED SOFTWARE IN DEFENCE EQUIPMENT - PART 2: GUIDANCE
MIL-STD-805 Revision B:1987 TOWING FITTING AND PROVISIONS FOR FIXED WING AIRCRAFT, DESIGN, REQUIREMENTS FOR
BS 2M 41:1977 Methods of numbering propulsion units and components and describing their direction of rotation
MIL-HDBK-728-5 Revision A:1994 RADIOGRAPHIC TESTING - VOLUME 5
MIL-D-8708 Revision C:1991 DEMONSTRATION REQUIREMENTS FOR AIRPLANES
DEFSTAN 47-17/1(1978) : 1978 ADAPTORS AND SEALS FOR PIPE CONNECTIONS TO AIRCRAFT PITOT/STATIC INSTRUMENTS AND ASSOCIATED EQUIPMENT
STANAG 4670 : 2016 GUIDANCE FOR THE TRAINING OF UNMANNED AIRCRAFT SYSTEMS (UAS) OPERATORS
BS 6221-25:2000 Printed wiring boards Guide to the rework and repair of soldered surface mounted printed board assemblies
AECTP-300 : 2006 CLIMATIC ENVIRONMENTAL TESTS
DEFSTAN 16-1/3(1992) : 1992 CORR 1997 OXYGEN; LIQUID AND GASEOUS (BREATHING) FOR AIRCRAFT SYSTEMS
MIL-HDBK-470 Revision A:1997 DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
MIL-T-18606 Base Document:1955 TEST PROCEDURES FOR AIRCRAFT ENVIRONMENT SYSTEMS
DEFSTAN 81-121/3(2004) : 2004 RECONDITIONING OF AIRBORNE HIGH PRESSURE SEAMLESS STEEL GAS CONTAINERS
MIL A 46108 : B ARMOR, TRANSPARENT, GLASS; GLASS/PLASTIC; PLASTIC LAMINATES (GENERAL SPECIFICATION)
BS 2X 26:2001 Doping and finishing schemes for fabric covered aircraft
STANAG 3258 : 0 POSITION OF PILOT OPERATED NAVIGATION AND RADIO CONTROLS
ASTM D 1322 : 2015-06 TEST METHOD FOR SMOKE POINT OF KEROSINE AND AVIATION TURBINE FUEL
STANAG 3687 : 90 AMD 2 CAMOUFLAGE OF AIRCRAFT
STANAG 3576 : 2016 ELECTRICAL CONNECTOR FOR DISPENSERS AND INTERNAL INTERVALOMETER TYPE ROCKET LAUNCHERS FOR AIRCRAFT
BS EN ISO 17834:2003 Thermal spraying. Coatings for protection against corrosion and oxidation at elevated temperatures
STANAG 3219 : 0 LOCATION AND GROUPING OF ELECTRICAL SWITCHES IN AIRCRAFT
STANAG 4234 : 0 ELECTROMAGNETIC RADIATION (RADIO FREQUENCY) - 200 KHz TO 40 GHz ENVIRONMENT - AFFECTING THE DESIGN OF MATERIEL FOR USE BY NATO FORCES
MIL-PRF-38214 Revision D:2008 COMPASS, MAGNETIC, MOUNTED
MIL-HDBK-237 Revision D:2005 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS AND SPECTRUM SUPPORTABILITY GUIDANCE FOR THE ACQUISITION PROCESS
DEFSTAN 47-22/1(1979) : 1979 END FITTINGS FOR FLEXIBLE HOSE ASSEMBLIES FOR AIRCRAFT - METRIC
DEFSTAN 16-17/2(1983) : 1983 AIR SUPPLY AND TEST CONNECTIONS FOR AIRCRAFT
MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
MIL-HDBK-691 Revision B:1987 Adhesive Bonding
MIL-HDBK-336-1 Base Document:1982 SURVIVABILITY, AIRCRAFT, NONNUCLEAR, GENERAL CRITERIA - VOLUME 1
DEFSTAN 08-41(PT1)/1(1997) : 1997 CHEMICAL AND BIOLOGICAL HARDENING OF MILITARY EQUIPMENT - PART 1: GENERAL REQUIREMENTS ASSESSMENT AND TESTING
MIL-DTL-5498 Revision G:2013 ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT
MIL-HDBK-6870 Revision B:2012 NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS
DEFSTAN 00-970/1(1983) : 1983 DESIGN REQUIREMENTS FOR SERVICE AIRCRAFT
MIL-STD-22 Revision D:1979 WELDED JOINT DESIGN
STANAG 3436 : 0 COLOURS AND MARKINGS USED TO DENOTE OPERATING RANGES OF AIRCRAFT INSTRUMENTS
DEFSTAN 05-57/6(2014) : 2014 CONFIGURATION MANAGEMENT OF DEFENCE MATERIEL
DEFSTAN 03-33/1(1993) : 1993 CHROMATE PASSIVATION OF CADMIUM AND ZINC SURFACES
STANAG 7140 : 0 AIRCRAFT FLIGHT INSTRUMENTS - LAYOUT AND DISPLAY
STANAG 3105 : 2014 PRESSURE REFUELLING CONNECTIONS AND DEFUELLING FOR AIRCRAFT
MIL-STD-331 Revision D:2017 FUZES, IGNITION SAFETY DEVICES AND OTHER RELATED COMPONENTS, ENVIRONMENTAL AND PERFORMANCE TESTS FOR
MIL-DTL-26499 Revision E:2006 Hose Assembly, Metal, Flexible, Breathing Oxygen
A-A-59166 Revision A:2014 COATING COMPOUND, NONSLIP (FOR WALKWAYS)
MIL-DTL-27422 Revision F:2014 TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT
MIL-L-25467 Revision D:1977 LIGHTING, INTEGRAL, RED, AIRCRAFT INSTRUMENT, GENERAL SPECIFICATION FOR
MIL-HDBK-336-3 Base Document:1983 SURVIVABILITY, AIRCRAFT, NONNUCLEAR, ENGINE - VOLUME 3
MIL-HDBK-705 Revision C:1987 GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS
DEFSTAN 91-48/2(1997) : 1997 HYDRAULIC FLUID, PETROLEUM: SUPERCLEAN NATO CODE: H-515 JOINT SERVICE DESIGNATION: OM-15 HYDRAULIC FLUID, PETROLEUM: NORMAL NATO CODE: H-520 JOINT SERVICE DESIGNATION: OM-18
MIL-I-8670 Revision B:1993 INSTALLATION OF FIXED GUNS AND ASSOCIATED EQUIPMENT IN NAVAL AIRCRAFT
BS 2X 32:1998 Specification for pre-treatment etch primer for aerospace purposes
MIL-STD-2161 Revision C:2014 Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft
DEFSTAN 61-6/3(1989) : 1989 AIRCRAFT ELECTRICAL CIRCUIT IDENTIFICATION
MIL-HDBK-2069 Base Document:1997 AIRCRAFT SURVIVABILITY
MIL D 1000/1 : LATEST DRAWING, ENGINEERING & ASSOCIATED DATA
STANAG 3225 : 75 AMD 7 LOCATION, ACTUATION AND SHAPE OF AIRFRAME CONTROLS FOR ROTARY WING AIRCRAFT
STANAG 3329 : 0 NUMERALS AND LETTERS IN AIRCREW STATIONS
SAE AS 8045 : 2011 MINIMUM PERFORMANCE STANDARD FOR UNDERWATER LOCATING DEVICES (ACOUSTIC) (SELF-POWERED)
MIL-S-416 Revision D:1979 STRAINER, WELL, WATER, WIRE WOUND
MIL-DTL-9129 Revision G:2014 Discharges, Electrostatic General Specification for
STANAG 3462 : 0 AVAILABILITY OF WEIGHT AND BALANCE REQUIREMENTS AND LOADING CRITERIA FOR TRANSPORT AIRCRAFT
SAE AS 6254 : 2015 MINIMUM PERFORMANCE STANDARD FOR LOW FREQUENCY UNDERWATER LOCATING DEVICES (ACOUSTIC) (SELF-POWERED)
DEFSTAN 91-4/9(2013) : 2013 FUEL, NAVAL, DISTILLATE NATO CODE: F-76 JOINT SERVICE DESIGNATION DIESO F-76
MIL A 5503 : E ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-W-5088 Revision L:1991 Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881)
DEFSTAN 00-50/1(1982) : 1982 GUIDE TO CHEMICAL ENVIRONMENTAL CONTAMINANTS AND CORROSION AFFECTING THE DESIGN OF MILITARY MATERIAL
MIL-DTL-25427 Revision B:2009 COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR
DEFSTAN 00-80/1(2012) : 2012 SOLAR HEAT REFLECTANCE REQUIREMENTS OF PAINTS FOR MILITARY EQUIPMENT
MIL-HDBK-274 Revision A:2011 ELECTRICAL GROUNDING FOR AIRCRAFT SAFETY
MIL PRF 7726 : K RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT
BS 2X 33:1998 Specification for two component epoxy primer for aerospace purposes
BS 2C 12:1980 Specification for jacking pads for aircraft
MIL-HDBK-17-1 Revision F:2002 COMPOSITE MATERIALS HANDBOOK - VOLUME 1: POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS
DEFSTAN 00-72/2(2005) : 2005 CHEMICAL AGENT RESISTANCE REQUIREMENTS FOR COATINGS APPLIED TO MILITARY EQUIPMENT
MIL-STD-1289 Revision D:2003 AIRBORNE STORES GROUND FIT AND COMPATIBILITY, REQUIREMENTS
MIL-DTL-83413 Revision C:2012 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING, GENERAL SPECIFICATION FOR
DEFSTAN 00-35/2(1996) : 1996 AMD 1 1997 ENVIRONMENTAL HANDBOOK FOR DEFENCE MATERIEL
MIL-A-19736 Revision A:1960 AIR REFUELLING SYSTEMS, GENERAL SPECIFICATION FOR
BS EN 10203:1991 Specification for cold reduced electrolytic tinplate
DEFSTAN 80-15/2(1990) : 1990 PAINT, PRE-TREATMENT PRIMER (ETCHING PRIMER) - TYPES: BRUSHING (BASE AND ACID COMPONENT), SPRAYING (BASE AND ACID COMPONENT)
MIL-HDBK-221 Base Document:1965 FIRE PROTECTION DESIGN HANDBOOK FOR U.S. NAVY AIRCRAFT POWERED BY TURBINE ENGINES
SAE AMS M 3171 : 1998 MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON
DEFSTAN 07-55(PT2)SEC6/1(1976) : 1976 AMD 1 1983 ENVIRONMENTAL TESTING OF SERVICE MATERIAL - PART 2: TESTS - SECTION 6: FIRE AND EXPLOSION
BS ISO 7295 : 1988 AEROSPACE SERIES - TYRE VALVES FOR AIRCRAFT - INTERCHANGEABILITY DIMENSIONS
STANAG 3950 : 0 HELICOPTER DESIGN CRITERIA FOR CREW CRASH PROTECTION AND ANTHROPOMETRIC ACCOMMODATION
MIL-HDBK-419 Revision A:1987 GROUNDING, BONDING, AND SHIELDING FOR ELECTRONIC EQUIPMENTS AND FACILITIES - VOLUME 1: BASIC THEORY & VOLUME 2: APPLICATIONS
STANAG 3209 : 2014 TYRE VALVE COUPLINGS
MIL-A-8860 Revision B:1987 AIRPLANE STRENGTH AND RIGIDITY GENERAL SPECIFICATION FOR
BS EN ISO 2063:2005 Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys
STANAG 3622 : 73 AMD 7 EXTERNAL VISION FROM AIRCREW STATIONS
MIL-PRF-46010 Revision H:2013 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738
MIL-STD-705 Revision D:2016 MOBILE ELECTRIC POWER SYSTEMS
DEFSTAN 25-7/1(1968) : 1968 AMD 1 HORNS, ELECTRICAL
MIL-PRF-38039 Revision D:2013 SYSTEMS, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR
MIL-HDBK-2084 Base Document:1995 General Requirements for Maintainability of Avionic and electronic Systems and Equipment
MIL-STD-1553 Revision B:1978 DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA
BS EN 1964-3:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres Cylinders made of seamless stainless steel with an <i>R</i><sub>m</sub> value of less than 1 100 MPa
BS EN 60893-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
DEFSTAN 03-20/3(2005) : 2005 ELECTRO-DEPOSITION OF ZINC
DEFSTAN 03-19/4(2010) : 2010 ELECTRO-DEPOSITION OF CADMIUM
STANAG 3212 : 2017 DIAMETERS FOR GRAVITY FILLING ORIFICES
MIL-HDBK-17-2 Revision F:2002 COMPOSITE MATERIALS HANDBOOK - VOLUME 2: POLYMER MATRIX COMPOSITES MATERIALS PROPERTIES
DEFSTAN 91-19/1(1973) : 1973 LUBRICANT, SOLID FILM; HEAT CURED NATO CODE NO; S-1738 JOINT SERVICE DESIGNATION; ZX-34
DEFSTAN 53-68/2(1977) : 1977 AMD 2 1984 V-FLANGE COUPLINGS FOR AIRCRAFT PIPING AND DUCTING (METRIC)
DEFSTAN 91-101/3(2001) : 2001 AMD 1 2002 LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST NATO CODE: O-156 JOINT SERVICE DESIGNATION: OX-27 AND OX-28
MIL-C-81774 Revision A:1973 CONTROL PANEL, AIRCRAFT, GENERAL REQUIREMENTS FOR
MIL-STD-961 Revision E:2003 DEFENSE AND PROGRAM-UNIQUE SPECIFICATIONS FORMAT AND CONTENT
DEFSTAN 00-52/4(2014) : 2014 THE GENERAL REQUIREMENTS FOR PRODUCT ACCEPTANCE AND MAINTENANCE TEST SPECIFICATIONS AND TEST SCHEDULES
DEFSTAN 66-7(PT2)/1(1971) : AMD 6 INSTRUMENTS, ELECTRICAL INDICATING (SEALED) - PART 2: LIST OF INSTRUMENTS

View more information
$33.90
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more