• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-HDBK-454 Revision B:2007

Current
Current

The latest, up-to-date edition.

GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT
Available format(s)

PDF

Published date

03-11-2000

FOREWORD
1 SCOPE
  1.1 Guidelines applicable to electronic
      equipment
  1.2 Revision of guidelines
      1.2.1 Redating
  1.3 Method of reference
  1.4 Interrelationship of guidelines
2 APPLICABLE DOCUMENTS
  2.1 Individual guidelines
  2.2 Industry addresses
3 DEFINITIONS
  3.1 Airborne, space, aerospace
  3.2 Other terms are defined in the individual
      guidelines
4 GENERAL GUIDELINES
  4.1 Application
  4.2 Use of selection and application standards
5 DETAIL GUIDELINES
  5.1 Individual guidelines for electronic equipment
6 NOTES
  6.1 Subject term (key word) listing
  6.2 Changes from previous issue
INDIVIDUAL GUIDELINES
Guideline 1 Safety Design Criteria - Personnel
             Hazards
Guideline 2 Capacitors
Guideline 3 Flammability
Guideline 4 Fungus Inert Materials
Guideline 5 Soldering
Guideline 6 Bearings
Guideline 7 Interchangeability
Guideline 8 Electrical Overload Protection
Guideline 9 Workmanship
Guideline 10 Electrical Connectors
Guideline 11 Insulating Materials, Electrical
Guideline 12 Fastener Hardware
Guideline 13 Structural Welding
Guideline 14 Transformers, Inductors, and Coils
Guideline 15 Metals, Corrosion Resistance
Guideline 16 Dissimilar Metals
Guideline 17 Printed Wiring
Guideline 18 Derating of Electronic Parts and
             Materials
Guideline 19 Terminations
Guideline 20 Wire, Hookup, Internal
Guideline 21 Castings
Guideline 22 Parts Management
Guideline 23 Adhesives
Guideline 24 Welds, Resistance, Electrical
             Interconnections
Guideline 25 Electrical Power
Guideline 26 Arc-Resistant Materials
Guideline 27 Batteries
Guideline 28 Controls
Guideline 29 Electron Tubes
Guideline 30 Semiconductor Devices
Guideline 31 Moisture Pockets
Guideline 32 Test Provisions
Guideline 33 Resistors
Guideline 34 Nomenclature
Guideline 35 Reliability
Guideline 36 Accessibility
Guideline 37 Circuit Breakers
Guideline 38 Quartz Crystals and Oscillator Units
Guideline 39 Fuses and Fuse Holders
Guideline 40 Shunts
Guideline 41 Springs
Guideline 42 Tuning Dial Mechanisms
Guideline 43 Lubricants
Guideline 44 Fibrous Materials, Organic
Guideline 45 Corona and Electrical Breakdown Prevention
Guideline 46 Motors and Rotary Power Converters
Guideline 47 Encapsulation and Embedment (Potting)
Guideline 48 Gears
Guideline 49 Hydraulics
Guideline 50 Indicator Lights
Guideline 51 Meters, Electrical Indicating
Guideline 52 Thermal Design
Guideline 53 Waveguides and Related Devices
Guideline 54 Maintainability
Guideline 55 Enclosures
Guideline 56 Rotary Servo Devices
Guideline 57 Relays
Guideline 58 Switches
Guideline 59 Brazing
Guideline 60 Sockets and Accessories
Guideline 61 Electromagnetic Interference Control
Guideline 62 Human Engineering
Guideline 63 Special Tools
Guideline 64 Microelectronic Devices
Guideline 65 Cable, Coaxial (RF)
Guideline 66 Cable, Multiconductor
Guideline 67 Marking
Guideline 68 Readouts and Displays
Guideline 69 Internal Wiring Practices
Guideline 70 Electrical Filters
Guideline 71 Cable and Wire, Interconnection
Guideline 72 Substitutability
Guideline 73 Standard Electronic Modules
Guideline 74 Grounding, Bonding, and Shielding
Guideline 75 Electrostatic Discharge Control
Guideline 76 Fiber Optics
Guideline 77 Integrated Diagnostics
Guideline 78 Producibility
TABLES
INDEX
CONCLUDING MATERIAL

Describes guidance and lessons learned in the selection of documentation for the design of electronic equipment. This handbook is for guidance only and cannot be cited as a requirement. If it is, the contractor does not have to comply.

Committee
AREA SESS
DevelopmentNote
Supersedes MIL STD 454 (N). (05/2007) B NOTICE 1 - Notice of Validation. (12/2012) NEW CHILD NOT 2 2020 IS ADDED
DocumentType
Standard
Pages
209
ProductNote
NEW CHILD NOT 2 2020 IS ADDED
PublisherName
US Military Specs/Standards/Handbooks
Status
Current

MIL-DTL-15514 Revision G:2016 TELEPHONE EQUIPMENT, SOUND POWERED TELEPHONE HANDSET, HEADSET - CHEST SET, AND HEADSET - CHEST SET, NOISE ATTENUATING
ASTM F 1166 : 2007 : R2013 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
SAE AIR 5451 : 2017 A GUIDE TO LANDING GEAR SYSTEM INTEGRATION
02/706952 DC : DRAFT MAY 2002 PREN 4530-001 - AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-55235 Revision A:2003 CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-DTL-4510 Revision F:2009 SPOTLIGHTS, INCANDESCENT, ROOF-MOUNTED, AUTOMOTIVE
MIL-DTL-49092 Revision A:2016 HEADSET-MICROPHONE H-325( )/TTC
MIL-DTL-85670 Revision D:2012 ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A
ASTM F 1166 : 2007 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
13/30295341 DC : 0 BS EN 4644-001 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-32529 Base Document:2015 POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD
BS EN 2997-001:2017 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak Technical specification
MIL-DTL-24728-8 Revision A:2009 Interconnecting Box, Fiber Optic, Fusion Splice Tray and Tray Holder Module
10/30217640 DC : 0 BS EN 4701-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4531 CONTACTS - PART 001: TECHNICAL SPECIFICATION
MIL-PRF-32272 Revision A:2016 INTEGRATED POWER MANAGEMENT CENTER (IPMC)
MIL-HDBK-470 Revision A:1997 DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
MIL-PRF-83383 Revision F:2017 CIRCUIT BREAKERS, REMOTE CONTROL, THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR
BS EN 4652-001:2015 Aerospace series. Connectors, coaxial, radio frequency Technical specification
MIL-DTL-13484 Revision G:2011 SWITCH, SENSITIVE: 30 VOLTS DIRECT CURRENT MAXIMUM, WATERPROOF
MIL-DTL-5815 Revision H:2012 ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR
MIL-DTL-21604 Revision G:2017 Switches, Rotary, Multipole and Selector, General Specification for
MIL-PRF-83419 Revision F:2016 ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY
MIL-HDBK-1473 Revision A:1997 Color and Marking of Army Materiel
PREN 3372-001 : 200P1 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
MIL-PRF-32236 Base Document:2007 GENERATOR, CHLORINE PORTABLE ELECTROLYTIC (PECG)
MIL-DTL-28791 Revision D:2016 ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL DTL 18396 : E SWITCHES, METER AND CONTROL, NAVAL SHIPBOARD
MIL-DTL-81581-8 Revision A:2006 HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED
PREN 4644-001 : 200P3 AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
I.S. EN 4652-001:2015 AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
SAE AS 81714 : 2014 TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR
I.S. EN 3645-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
BS EN 3372-001:2007 Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous Technical specification
BS EN 4529-001:2006 Aerospace series. Elements of electrical and optical connection. Sealing plugs Technical specification
MIL-DTL-24728-10 Base Document:2010 INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1017 MM
IPC AJ 820 : A ASSEMBLY AND JOINING HANDBOOK
MIL-PRF-85045 Revision G:2014 CABLES, FIBER OPTIC, GENERAL SPECIFICATION FOR
MIL C 39019 : C CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR
MIL DTL 0053133 : B NOTICE 1 GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
MIL-DTL-28778 Revision A:2005 TRANSFORMER, POWER, STEPUP, 3 PHASE
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-STD-2088 Revision B:2007 BOMB RACK UNIT (BRU), SINGLE STORE, AIRCRAFT
MIL-PRF-32484 Base Document:2013 PROTECTIVE RELAYS AND ATTACHMENTS, MEDIUM VOLTAGE VACUUM CIRCUIT BREAKER APPLICATIONS
DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
PREN 3646-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
IPC WHMA A 620 HUNGARIAN : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 TURKISH : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC WHMA A 620 HEBREW : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-32485 Base Document:2013 CIRCUIT BREAKERS, VACUUM TYPE (VCB), ELECTRIC POWER, MEDIUM VOLTAGE, ALTERNATING CURRENT, DRAW-OUT REMOVABLE CONSTRUCTION, WITHOUT INTERNAL OVERCURRENT PROTECTION
MIL-DTL-32483 Base Document:2013 Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard
MIL-PRF-32565 Revision A:2017 BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION
MIL-DTL-45068 Revision E:2006 LIGHT, DOME, VEHICULAR, 24 VOLT DC
IPC WHMA A 620 SPANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 CHINESE : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL-DTL-3124 Revision E:2014 GENERATOR, ALTERNATING CURRENT, 60-HERTZ (NAVAL SHIPBOARD USE)
IPC WHMA A 620 VIETNAMESE : B2012 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL-DTL-7788 Revision H:2011 PANELS, INFORMATION, INTEGRALLY ILLUMINATED
MIL-DTL-53133 Revision C:2002 GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-STD-1353 Revision C:2014 ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
IPC HDBK 830 : A GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS
MIL-DTL-24728-9 Base Document:2010 INTERCONNECTION BOX, CABLE ROUTING, FIBER OPTIC, SPRAYTIGHT, 712 X 1372 MM
MIL-DTL-52286 Revision D:2010 CABLE ASSEMBLIES, POWER, ELECTRICAL (WITH MOLDED ON TERMINATIONS), GENERAL SPECIFICATION FOR
IPC WHMA A 620 POLISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL-DTL-5099 Revision C:2011 INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-11996 Revision C:2015 HANDSETS, GENERAL SPECIFICATION FOR
DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-5589 Revision E:1999 EARPHONE, (EXTENDED RANGE), H-301/U
IPC WHMA A 620 ESTONIAN : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL-DTL-24299 Revision B:2017 HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD
IPC WHMA A 620 KOREAN : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL-DTL-6162 Revision C:2000 GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR
MIL-PRF-49291 Revision D:2013 FIBER, OPTICAL, (METRIC) GENERAL SPECIFICATION FOR
MIL-DTL-2726 Revision C:2006 RECEPTACLE, RECEPTACLE PLUGS, SWITCH AND RECEPTACLES, AND OUTLETS (ELECTRICAL), GENERAL SPECIFICATION FOR
MIL-DTL-83454 Revision B:2016 TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED)
IEEE DRAFT 1505 : 0 RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY
MIL-PRF-53090 Revision B:2016 BLADE, MINE CLEARING
SAE ARP 1281 : 2002 ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL-DTL-24223 Revision D:2014 LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS
SAE ARP 731 : 2015 GENERAL REQUIREMENTS FOR APPLICATION OF VAPOR CYCLE REFRIGERATION SYSTEMS FOR AIRCRAFT
16/30353142 DC : 0 BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGRES C OR 200 DEGRES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
DSCC 88013 : G DELAY LINES, PASSIVE, 3-PIN, SIP
MIL-PRF-49404 Revision A:1997 Bias Voltage Regulator, CN-1559/UA (No S/S Document)
MIL-DTL-24765 Revision B:2016 POWER SUPPLY, UNINTERRUPTIBLE, STATIC (NAVAL SHIPBOARD)
MIL-PRF-49434 Revision A:1997 AIMING LIGHT, INFRARED, AN/PAQ-4C
MIL-STD-1678-3 Revision C:2016 FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS)
I.S. EN 4165-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-16377 Revision J:2014 Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for
MIL-PRF-49319 Revision A:1997 DETECTOR-DEWAR, DT-591B/UA
MIL-PRF-85045-28 Revision A:2014 CABLE, FIBER OPTIC, NINETEEN TUBE, BLOWN OPTICAL FIBER, STANDARD AND ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 5 (TUBE), APPLICATION B (SHIPBOARD), CABLE CLASS SM AND MM, (METRIC)
MIL-DTL-49198 Revision B:2014 HEADSET-MICROPHONE KIT, MK-1564( )/AIC
MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
MIL-PRF-49136 Revision C:2000 COUNTERMEASURES TEST SET, AN/ALM-178()
MIL-DTL-15103 Revision G:2015 SALINITY INDICATING EQUIPMENT
MIL PRF 62186 : A GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED)
MIL-PRF-49177 Revision B:1997 SCAN-INTERLACE, PL-1408/UA
MIL-DTL-38195 Revision D:2000 GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE
EN 2997-001:2017 Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 001: Technical specification
MIL-DTL-24705 Revision B:2010 PENETRATORS, MULTIPLE CABLE, ELECTRIC CABLE, GENERAL SPECIFICATION FOR
MIL-DTL-52872 Revision D:1998 SENSOR GROUP, ULTRASONIC MOTION: TRANSCEIVER RT-1161/FSS-9(V) AND PROCESSOR MX-9444/FSS-9(V)
IEEE/ANSI C63.15-2010 American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment
MIL-DTL-24231 Revision E:2013 Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for
MIL-DTL-3976 Revision F:2013 LIGHTS, MARKER, CLEARANCE (SERVICE AND BLACKOUT), GENERAL SPECIFICATION FOR
MIL-DTL-32408 Base Document:2012 INTEGRAL MOTOR PUMP (IMP)
PREN 4532 : 200P1 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 MICROMETER/280 MICROMETER FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
PREN 3660-001 : 200P3 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-83729 Revision C:2013 CHOPPERS, ELECTROMECHANICAL, GENERAL SPECIFICATION FOR
PREN 4165-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
SAE ARP 81490 : 2016 TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE
SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
SAE AS 5643/1 : 2005 S400 COPPER MEDIA INTERFACE CHARACTERISTICS OVER EXTENDED DISTANCES
SAE ARP 94910 : 2012 AEROSPACE - VEHICLE MANAGEMENT SYSTEMS - FLIGHT CONTROL DESIGN, INSTALLATION AND TEST OF, MILITARY UNMANNED AIRCRAFT, SPECIFICATION GUIDE FOR
SAE AS 6019 : 2012 ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE 28 VDC
I.S. EN 4644-001:2017 AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
BS EN 4644-001:2017 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous Technical specification
IEC 63004:2015 Standard for receiver fixture interface
SAE AS 85028 : 2017 CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR
DIN EN 3646-001:2016-03 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
BS EN 4530-001:2006 Aerospace series. Sealing sleeves used in elements of connection Technical specification
I.S. EN 3646-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
IPC WHMA A 620 DANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
MIL-HDBK-115 Revision C:2016 U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES)
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
MIL-PRF-62368 Revision C:2009 MOTOR, GEARHEAD, 18 - 30 VOLTS, DIRECT CURRENT
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
MIL-PRF-25620 Revision D:1997 TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A
MIL-DTL-52876 Revision D:1997 CABINETS, MONITOR, CY-7359/FSS-9(V) CY-7360/FSS-9(V), AND CY-7361/FSS-9(V)
BS EN 4165-001:2015 Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous Technical specification
MIL-PRF-49384 Revision B:1997 OPTICAL IMAGER, SU-121/UA
MIL-PRF-55359 Revision A:1997 ANTENNA AS-1304()/ARN-30
MIL-PRF-55371 Revision B:1997 TAPE, RADIO FREQUENCY MEASURING (P/O ANTENNA GROUP, AN/GRA-50())
DSCC 85122 : G INDICATOR ASSEMBLIES: RED, YELLOW, GREEN; PLAIN AND FILTERED LENSES; PANEL-SEALED, AND PANEL AND REAR SEALED
SAE ARP 5311 : 2016 AEROSPACE-INTERFACE DEFINITION FOR MECHANICAL ACTUATION SUBSYSTEMS
MIL-DTL-22442-3 Revision B:1998 CABLE ASSEMBLY, AIRCRAFT AUDIO, CABLE (RETRACTILE)
MIL-PRF-49176 Revision B:1997 REGULATOR, BIAS VOLTAGE, CN-1503/UA
MIL-DTL-868 Revision A:2014 Valves, Hydraulic Directional Control, General Specification for
MIL-HDBK-1760 Revision A:2004 AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM
MIL-PRF-64266 Revision B:2016 CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR
09/30206879 DC : 0 BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
MIL-HDBK-338 Revision B:1998 ELECTRONIC RELIABILITY DESIGN HANDBOOK
MIL-PRF-49293 Revision B:2011 RADIAC SET, AN/PDR-75
BS EN 4532:2009 Aerospace series. Cables, optical, single core 200 ?m/280 ?m fibre, 2,5 mm outer jacket. Technical specification
MIL-PRF-62430 Revision B:2010 HARNESS ASSEMBLY, THERMOCOUPLE
MIL-DTL-12883-50 Revision B:2003 SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKETS AND SOCKET ASSEMBLY FOR RELAYS, 2-POLE, 10 AMPERES (MIL-PRF-6106 AND MIL-PRF-83536)
MIL-PRF-49168 Revision C:1997 SCAN-INTERLACE, PL-1403/UA, PL-1403A/UA
PREN 3645-001 : 200P2 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
SAE AIR 1277 : 2005 COOLING OF MILITARY AVIONIC EQUIPMENT
SAE AS 4914 : 2016 AIRCRAFT FLUORESCENT LIGHTING BALLAST/FIXTURE SAFETY STANDARD
BS EN 3660-001:2019 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Technical specification
SAE AS 39029 : 2017 CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
I.S. EN 2997-001:2017 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
DIN EN 3660-001:2016-04 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
NASA MSFC SPEC 3635 : 2012 PYROTECHNIC SYSTEM SPECIFICATION
NASA STD 6016(INT) : 2006 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
MIL-DTL-53078 Revision A:2011 MOUNTING KIT: M1 TANK CLEARED LANE MARKING SYSTEM (CLAMS)
NASA KSC STD E 0001 : 2008 DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA STD 6016 : 2016 STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT
NASA STD 8719.24 : 2011 NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS
NASA MSFC STD 3012 : 2012 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
MIL-DTL-83361 Revision B:2007 INDICATOR, PRESSURE, OIL, DUAL, 0-100 PSI, EGU-18/A
IPC HDBK 630 : 0 GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY
MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
MIL-PRF-49446 Revision B:1997 Detector-Dewar, DT-591A/UA (No S/S Document)
MIL-HDBK-516 Revision C:2014 AIRWORTHINESS CERTIFICATION CRITERIA
MIL-DTL-22442 Revision G:2009 CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR
MIL-DTL-9490 Revision E:2008 FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-DTL-83723 Revision H:2016 CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MIL-PRF-49163 Revision B:1997 VIDEO PREAMPLIFIER, AM-6923/UA
MIL-DTL-22442-35 Revision B:1998 CABLE ASSEMBLIES, AIRCRAFT AUDIO, CABLE
BS IEC 63004:2015 Standard for receiver fixture interface
MIL-HDBK-62 Base Document:1996 DOCUMENTATION OF DIGITAL ELECTRONIC SYSTEMS WITH VHDL
MIL-PRF-32144 Revision B:2012 CLOCK, AIRCRAFT, ELECTRONIC
MIL-DTL-55661 Revision C:2002 CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837( )/U
MIL-PRF-49167 Revision B:1997 AUXILIARY CONTROL, VIDEO PL-1402/UA
MIL-PRF-32222 Revision A:2016 HEATER, VEHICULAR COMPARTMENT MULTIFUEL BURNING 24 VOLT, DC 15,000 - 30,000 BTU/HR
13/30280018 DC : 0 BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
MIL-R-83516 Revision C:2017 Relays, Reed, Dry, General Specification for (No S/S Document)
13/30283195 DC : 0 BS EN 4652-001 - AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIOFREQUENCY - PART 001: TECHNICAL SPECIFICATION
MIL-PRF-29504 Revision B:2002 TERMINI, FIBER OPTIC CONNECTOR, REMOVABLE, GENERAL SPECIFICATION FOR
MIL-DTL-52869 Revision C:1997 SENSOR GROUP, PASSIVE ULTRASONIC: RECEIVER R-1860/FSS-9(V) AND PROCESSOR MX-9443/FSS-9(V)
MIL DTL 25627 : D TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP
MIL-PRF-49185 Revision B:1997 RADIO SET AN/GRC-103(V)3
13/30278621 DC : 0 BS EN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
13/30287034 DC : 0 BS EN 3660-001 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-83522 Revision E:2013 Connectors, Fiber Optic, Single Ferrule, General Specification for
MIL-PRF-49170 Revision B:1997 OPTICAL IMAGER, SU-97-UA, SU-97A/UA, AND SU-97B/UA
NF EN 4532 : 2009 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
ARINC 404B-2:2015 CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS
MIL-PRF-49166-1 Revision B:1999 MECHANICAL SCANNER, MX-9872(V)1/UA
MIL-DTL-3885 Revision H:2016 CABLE ASSEMBLIES AND CORD ASSEMBLIES, ELECTRICAL
DSCC 87019 : G INDICATOR ASSEMBLIES, IR SECURE LIGHTING; RED, YELLOW, GREEN; PANEL SEALING
SAE ARP 1070E : 2019 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
PREN 4530-001 : 200P1 AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
AEP-24 : 2006 AIRCRAFT ELECTRICAL HAZARDS ON THE FLIGHT LINE
SAE ARP 1070 : 2014 DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY
BS EN 3660-001:2016 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors Technical specification
I.S. EN 16602-70:2016 SPACE PRODUCT ASSURANCE - MATERIALS, MECHANICAL PARTS AND PROCESSES
SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
SAE AS 94900 : 2007 AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR
SAE AS 58091 : 2012 CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT, GENERAL SPECIFICATION FOR
I.S. EN 4532:2009 AEROSPACE SERIES - CABLES, OPTICAL, SINGLE CORE 200 [MU]M/280 [MU]M FIBRE, 2,5 MM OUTER JACKET - TECHNICAL SPECIFICATION
SAE AS 81659 : 2017 CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR
EN 4644-001:2017 Aerospace series - Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175 °C (or 125 °C) continuous - Part 001: Technical specification
BS EN 3716-001:2006 Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification
13/30292601 DC : 0 BS EN 3646-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
BS EN 3645-001:2015 Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous Technical specification
BS EN 3708-001:2006 Aerospace series. Modular interconnection systems. Terminal junction systems Technical specification
BS EN 3646-001:2015 Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous Technical specification
EN 3708-001 : 2006 AEROSPACE SERIES - MODULAR INTERCONNECTION SYSTEMS - TERMINAL JUNCTION SYSTEMS - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-83725 Revision E:2017 Relays, Vacuum, General Specification for
EN 4165-001:2015/AC:2017 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
EN 3372-001:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 001: Technical specification
EN 4530-001:2006 Aerospace series - Sealing sleeves used in elements of connection - Part 001: Technical specification
EN 4532 : 2009 Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification
EN 3646-001:2015 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, BAYONET COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
MIL-DTL-9398 Revision D:2007 GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT
EN 3660-001:2016 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
EN 3645-001:2015 Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification
EN 3716-001 : 2006 AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION
EN 4652-001:2015 Aerospace series - Connectors, coaxial, radio frequency - Part 001: Technical specification
EN 4529-001:2006 Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification
SAE AS 5657 : 2013 TEST PLAN/PROCEDURE FOR AS5643 IEEE-1394B INTERFACE REQUIREMENTS FOR MILITARY AND AEROSPACE VEHICLE APPLICATIONS
MIL PRF 14465 : D LIGHTS, COMPOSITE, VEHICULAR (METRIC)
EIA 933 : 2015 REQUIREMENTS FOR A COTS ASSEMBLY MANAGEMENT PLAN
EIA STD 4899 : 2017-05 REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN
MIL-PRF-83536 Revision F:2017 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR
MIL PRF 62478 : A COUPLER, OPTICAL
JSSG-2009 Revision A:2013 AIR VEHICLE SUBSYSTEMS (JOINT SERVICE SPECIFICATION GUIDE)
MIL-DTL-24728-11 Base Document:2010 INTERCONNECTING BOX, FIBER OPTIC, SPLICE TRAY HOLDER MODULE, 8 TRAY
BS EN 16602-70:2016 Space product assurance. Materials, mechanical parts and processes
MIL-DTL-24558 Revision B:2011 TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS, GENERAL SPECIFICATION FOR
07/30169484 DC : 0 BS EN 4644-001 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION
NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
MIL-PRF-28876 Revision E:2004 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICATION FOR
MIL-DTL-28875 Revision C:2012 Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for
MIL-PRF-85046 Revision A:2015 ACTUATOR, LINEAR, ELECTROMECHANICAL
MIL-DTL-62421 Revision A:2009 CONTROL, UNIT, ELECTRONIC, DIGITAL
MIL-DTL-24705-4 Revision A:2014 PENETRATORS, MULTIPLE CABLE, COMPACT RECTANGULAR METAL FRAME AND BLOCKS, ELECTRICAL AND FIBER OPTIC CABLE
MIL-DTL-27193 Revision D:2017 INDICATOR, ATTITUDE ARU-2B/A
MIL-DTL-12883-51 Revision B:2003 SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726)
MIL-PRF-49164 Revision C:1997 VIDEO POSTAMPLIFIER-CONTROL DRIVER, AM-6924/UA
MIL-PRF-49166 Revision C:1999 MECHANICAL SCANNER, MX-9872(V)/UA; GENERAL SPECIFICATION FOR
PREN 4652-001 : DRAFT 2014 AEROSPACE SERIES - CONNECTORS, COAXIAL, RADIO FREQUENCY - PART 001: TECHNICAL SPECIFICATION
SAE AS 83519 : 2015 SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR
SAE AS 4941 : 2015 AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS
SAE AS 81703 : 2012 CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING
AEDP-6 : 2014 NATO ADVANCED DATA STORAGE INTERFACE REQUIREMENTS AND IMPLEMENTATION GUIDE
SAE AIR 4004 : 2015 GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR
PREN 2997-001 : 200P4 AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION
SAE AIR 38 : 2015 GUIDE FOR THE DESIGN OF THREADED SCREW OR STUD TYPE ELECTRICAL EQUIPMENT TERMINATIONS
I.S. EN 3660-001:2016 AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 001: TECHNICAL SPECIFICATION
EN 16602-70:2016 Space product assurance - Materials, mechanical parts and processes
DSCC 99002 : A TRANSFORMER, SWITCHING

MIL-PRF-31031 Revision C:2014 CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR
MIL-I-24092 Revision D:1993 INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS
MIL-DTL-5015 Revision H:2000 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
MIL-I-3190 Revision F:1991 INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR
SAE AMS 3638 : 2012 TUBING, IRRADIATED POLYOLEFIN PLASTIC, ELECTRICAL INSULATION PIGMENTED, SEMI-RIGID, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO
MMM-A-121 Base Document:1966 ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL
NASM5591:2015 FASTENERS, PANEL, NONSTRUCTURAL
ASME B18.2.1 : 2012 SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES)
MIL C 28754 : D CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR
MIL-I-23264 Revision A:1968 INSULATORS, CERAMIC, ELECTRICAL AND ELECTRONIC, GENERAL SPECIFICATION FOR
MIL-HDBK-505 Base Document:1998 DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS
MIL-I-17205 Revision C:1961 INSULATION CLOTH AND TAPE, ELECTRICAL, GLASS FIBER, VARNISHED
MIL-PRF-39006-22 Revision J:2012 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR79
SD-19 Base Document:2013 LIFE CYCLE COST SAVINGS THROUGH PARTS MANAGEMENT
MIL-I-22129 Revision C:1962 INSULATION TUBING, ELECTRICAL, POLYTETRAFLUOROETHYLENE RESIN, NONRIGID (SEE ASTM D 3295)
MMM-A-134 Base Document:1970 ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
MIL-W-81044 Revision B:1973 WIRE, ELECTRIC, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARYLENE INSULATED, COPPER OR COPPER ALLOY
FF-S-210 Revision B:1981 SETSCREWS, SQUARE HEAD (INCH) AND SLOTTED HEADLESS (INCH AND METRIC)
MIL-A-46146 Revision B:1990 ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)
MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
MIL-DTL-21097 Revision H:2017 Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
NASM27384:2016 RIVET, BLIND, DRIVE TYPE
MIL-T-83721 Base Document:1975 TRANSFORMER, VARIABLE, POWER GENERAL SPECIFICATION FOR
MIL-PRF-39012 Revision F:2014 CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
A-A-52414 Revision B:2012 BEARING, ROLLER, THRUST
MIL-I-24768-2 Base Document:1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEE)
ASTM D 4388 : 2013 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
MIL-PRF-55339 Revision C:2005 Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for
SAE AMS 3653 : 2016 TUBING, ELECTRICAL INSULATION, STANDARD WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
NEMA RE 2:1999 Electrical Insulating Varnish
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
A-A-52401 Base Document:1992 BEARING, SLEEVE (STEEL-BACKED)
MIL-DTL-24308 Revision G:2009 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
MIL-W-81822 Revision A:1982 WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR
SAE AS 81936 : 2006 BEARINGS, PLAIN, SELF-ALIGNING (CU-BE BALL, CRES RACE) GENERAL SPECIFICATION FOR
IPC J STD 001 : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
A-A-1936 Revision A:1996 ADHESIVES, CONTACT, NEOPRENE RUBBER
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-HDBK-1861 Revision B:2013 SELECTION AND USE OF ELECTRICAL AND ELECTRONIC ASSEMBLIES, BOARDS, CARDS AND ASSOCIATED HARDWARE
NAS1686:2013 RIVET, BLIND, ALUMINIUM SLEEVE, MECHANICALLY LOCKED SPINDLE, BULBED
NASM33557:2017 NONSTRUCTURAL RIVETS FOR BLIND ATTACHMENT - LIMITATIONS FOR DESIGN AND USAGE
IEEE C95.2-1999 RADIO-FREQUENCY ENERGY AND CURRENT-FLOW SYMBOLS
MIL-DTL-83513 Revision G:2008 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
MIL-B-8942 Revision A:1965 BEARINGS, PLAIN, TFE LINED, SELF-ALIGNING
SAE AS 81765 : 2017 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
MIL-A-24179 Revision A:1969 ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION
CFR 21(PTS800-1299) : 0 FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299
MIL-DTL-81381 Revision C:2005 WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY
MIL-DTL-22992 Revision H:2015 Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for
MIL-DTL-83733 Revision E:2006 CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR
MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
ASTM D 3295 : 2015 : REDLINE Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
MIL-DTL-1222 Revision J:2000 STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
MIL-DTL-83503 Revision C:2005 Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for
MIL-DTL-28804 Revision D:1998 CONNECTORS, PLUG AND RECEPTACLE, ELECTRIC, RECTANGULAR, HIGH DENSITY, POLARIZATION CENTER JACKSCREW - GENERAL SPECIFICATION FOR
NASM25027:2012 NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
MIL-B-81793 Revision D:1993 BEARING, BALL, PRECISION, FOR INSTRUMENTS AND ROTATING COMPONENTS
MIL-A-3920 Revision C:1977 ADHESIVE, OPTICAL, THERMOSETTING
FF-N-836 Revision E:1994 Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat
SAE AS 81934 : 2016 BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING
MIL-DTL-26518 Revision C:2000 CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR
MMM-A-138 Revision B:1986 ADHESIVE, METAL TO WOOD STRUCTURAL
NASM 7838 : 2004 BOLT, INTERNAL WRENCHING, 160 KSI FTU
MIL-STD-889 Revision C:2016 DISSIMILAR METALS
MIL-PRF-39006-25 Revision E:2012 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum (Polarized, Sintered Slug), Extended Range, +85 Degrees C (Voltage Derated to +125 Degrees C), Established Reliability, Style CLR81
NASM33522:1999 RIVETS, BLIND, STRUCTURAL, MECHANICALLY LOCKED AND FRICTION RETAINER SPINDLE, (RELIABILITY AND MAINTAINABILITY) DESIGN AND CONSTRUCTION REQUIREMENT FOR
AWS D17.2/D17.2M : 2013 SPECIFICATION FOR RESISTANCE WELDING FOR AEROSPACE APPLICATIONS
NASM 8831 : 2003 FASTENERS, ALLOY STEEL, 450 DEGREES F EXTERNALLY THREADED, 180 KSI FTU, 108 KSI FSU, FATIGUE RATED
SAE AMS A 25463 : 2013 ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION
SAE AS 13341 : 1998 PROCESS FOR BARRIER COATING OF ANTI-FRICTION BEARING
NASM33540:2003 SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR
NASM8814:2013 RIVETS, BLIND, NONSTRUCTURAL TYPE
MIL-I-19166 Revision C:1963 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBER, PRESSURE-SENSITIVE
IPC D 322 : 0 GUIDELINES FOR SELECTING PRINTED WIRING BOARD SIZES USING STANDARD PANEL SIZES
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
MIL-I-3158 Revision D:1968 INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS
ASTM D 5363 : 2016 : REDLINE Standard Specification for Anaerobic Single-Component Adhesives (AN)
SAE AS 22759 : 2014 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
ANSI/NEMA FI 3:2004 Calendered Aramid Papers Used for Electrical Insulation
MIL-I-24768-3 Base Document:1992 INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, EPOXY-RESIN (GEB)
ANSI Z136.1 : 2014 SAFE USE OF LASERS
MIL-DTL-83723 Revision H:2016 CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR
MIL-A-22397 Base Document:1960 ADHESIVE, PHENOL AND RESORCINOL RESIN BASE (FOR MARINE SERVICE USE)
NASM5674:2015 RIVETS, STRUCTURAL, ALUMINUM ALLOY, TITANIUM COLUMBIUM ALLOY, GENERAL SPECIFICATION FOR
SAE AMS STD 2175 : 1998 CASTINGS, CLASSIFICATION AND INSPECTION OF
MIL-STD-1310 Revision H:2009 SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY
MIL-PRF-27 Revision G:2014 TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR
MIL-DTL-83517 Revision B:2015 Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for
FED-STD-H28-2 Revision B:1991 SCREW-THREAD STANDARDS FOR FEDERAL SERVICES SECTION 2 UNIFIED INCH SCREW THREADS- UN AND UNR THREAD FORMS
MIL-STD-276 Revision A:1992 IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS
AWS D17.1 : 2001 SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS
MIL-DTL-38999 Revision M:2015 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for
MIL-B-8948 Revision A:1972 BEARINGS, PLAIN, ROD END, TFE LINED, SELF-ALIGNING
SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
MIL-DTL-55181 Revision F:2012 CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR
FF-W-100 Revision C:1969 WASHER, LOCK, TOOTH
MIL-I-22076 Revision B:1963 INSULATION TUBING, ELECTRICAL, NONRIGID, VINYL, VERY LOW TEMPERATURE GRADE
MIL-DTL-16878 Revision H:2012 WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
SAE AS 7928 : 2011 TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR
SAE AS 50861 : 2011 WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY
FF-S-200 Revision B:2004 SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
MIL-DTL-28748 Revision D:2001 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR
CFR 29(PT1910.1000 TO END) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
FF-R-556 Revision D:1981 RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE
IEEE C95.1-2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz
MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
NAS498:2011 FASTENERS, ALLOY STEEL EXTERNALLY THREADED, 95 KSI FSU, 450 DEGREES F
MIL-HDBK-1547 Revision A:1998 ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE AND LAUNCH VEHICLES
MMPDS 02 : 2005 METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS)
MIL-PRF-15305 Revision F:2013 COILS, ELECTRICAL, FIXED AND VARIABLE, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
ANSI N2.1 : 1989 RADIATION SYMBOL
SAE AS 27212 : 2011 TERMINAL BOARD ASSEMBLY, MOLDED-IN-STUD, ELECTRIC
A-A-59125 Revision B:2012 Terminal Boards, Molded, Barrier Screw and Stud Types and Associated Accessories
FF-W-84 Revision A:1967 WASHER, LOCK (SPRING)
MIL-STD-1472 Revision G:2012 HUMAN ENGINEERING
MIL-PRF-83446 Revision D:2015 COILS, RADIO-FREQUENCY, CHIP, FIXED OR VARIABLE, GENERAL SPECIFICATION FOR
ASME B18.3 : 2012 SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES)
ASTM A 449 : 2014 : REDLINE Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
SAE AMSA8576A:1997(S2016) ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC
ASME B18.24 : 2015 PART IDENTIFYING NUMBER (PIN) CODE SYSTEM STANDARD FOR B18 FASTENER PRODUCTS
A-A-59770 Revision A:2007 INSULATION TAPE, ELECTRICAL, PRESSURE SENSITIVE ADHESIVE AND PRESSURE SENSITIVE THERMOSETTING ADHESIVE
MIL-HDBK-198 Revision B:2012 CAPACITORS, SELECTION AND USE OF
MIL P 642 : D PLUG, TELEPHONE AND ACCESSORY SCREWS, GENERAL SPECIFICATION FOR
FF-S-92 Revision C:2014 SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD
MIL-HDBK-512 Revision A:2001 PARTS MANAGEMENT
MMM-A-132 Revision B:1994 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
MMM-A-181 Revision D:1980 ADHESIVE PHENOL RESORCINOL OR MELAMINE BASE
AIAA R 100 : A 2001 RECOMMENDED PRACTICE FOR PARTS MANAGEMENT
MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
MIL-C-29600 Base Document:1989 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE, CRIMP CONTACTS, ASSOCIATED HARDWARE GENERAL SPECIFICATION FOR
MIL-DTL-21617 Revision B:2012 CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR
SAE AMS 3654E : 2016(S2018) TUBING, ELECTRICAL INSULATION, LIGHT WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
MIL-PRF-39010 Revision E:1997 Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for
MIL-PRF-49142 Revision B:2004 CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL-HDBK-691 Revision B:1987 Adhesive Bonding
MIL-PRF-21038 Revision F:2004 TRANSFORMERS, PULSE, LOW POWER GENERAL SPECIFICATION FOR
MIL-DTL-18240 Revision F:1997 FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM
MIL J 641 : E JACK, TELEPHONE, GENERAL SPECIFICATION FOR
MIL-STD-981 Revision C:2010 DESIGN, MANUFACTURING AND QUALITY STANDARDS FOR CUSTOM ELECTROMAGNETIC DEVICES FOR SPACE APPLICATIONS
MIL-STD-22 Revision D:1979 WELDED JOINT DESIGN
L-P-516 Revision A:1967 PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST
MIL-I-24391 Revision C:1990 INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE
MIL-HDBK-1277 Base Document:1998 SPLICES, CHIPS, TERMINALS, TERMINAL BOARDS, BINDING POSTS, ELECTRICAL
ASTM D 1000 : 2017 : REDLINE Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
MIL-I-631 Revision D:1961 INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID
NAS1687:2012 RIVET, BLIND, NICKEL-COPPER AND NICKEL ALLOY, MECHANICALLY LOCKED SPINDLE, BULBED
MIL-R-7885 Revision D:1988 RIVET, BLIND, STRUCTURAL, MECHANICALLY LOCKED SPINDLE AND FRICTION LOCKED SPINDLE, GENERAL SPECIFICATION FOR
SAE AMS 3655D :2016 TUBING, ELECTRICAL INSULATION, THIN WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE)
MIL-STD-681 Revision F:2012 IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE
NASM22978:2012 FASTENER, ROTARY, QUICK-OPERATING, HIGH-STRENGTH
MIL-B-8943 Revision A:1966 BEARINGS, JOURNAL - PLAIN AND FLANGED, TFE-LINED
MIL-DTL-39024 Revision C:2014 JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR
MIL-T-55631 Base Document:1972 TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR
ASME B18.6.3 : 2013 MACHINE SCREWS, TAPPING SCREWS, AND METALLIC DRIVE SCREWS (INCH SERIES)
MMM-A-189 Revision C:1985 ADHESIVE SYNTHETIC RUBBER THERMOPLASTIC GENERAL PURPOSE
A-A-59551 Revision A:2009 WIRE, ELECTRICAL, COPPER (UNINSULATED)
A-A-3097 Base Document:1997 ADHESIVES, CYANOACRYLATE, RAPID ROOM TEMPERATURE-CURING, SOLVENTLESS
FF-S-85 Revision D:2005 Screw, Cap, Slotted and Hexagon Head
MIL-R-24243 Revision C:1987 RIVET, BLIND, NON-STRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR
NAS547:2012 FASTENER, ROTARY, QUICK-OPERATING, HIGH STRENGTH
MIL-STD-1425 Revision A:1991 SAFETY DESIGN REQUIREMENTS FOR MILITARY LASERS AND ASSOCIATED SUPPORT EQUIPMENT
NASM6812:2012 FASTENERS, EXTERNALLY THREADED, ALLOY STEEL, CORROSION RESISTANT STEEL, ALUMINUM, 60,000 PSI TO 125,000 PSI

View more information
$32.74
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more