MIL-STD-2073-1 Revision E:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
STANDARD PRACTICE FOR MILITARY PACKAGING
23-07-2013
English
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - DEVELOPMENT OF MILITARY PACKAGING
REQUIREMENTS
APPENDIX B - FACTORS AND FORMULAE ESTABLISHING
MILITARY PACKAGING QUP AND ICQ
APPENDIX C - CONTAINERS
APPENDIX D - DEVELOPMENT OF MILITARY PACKAGING
REQUIREMENTS FOR KITS (PARTS AND MODIFICATION)
APPENDIX E - MILITARY PACKAGING DATA FORMS
APPENDIX F - MILITARY PACKAGING DESIGN VALIDATION PROVISIONS
APPENDIX G - QUALITY ASSURANCE PROVISIONS
APPENDIX H - PROCEDURES FOR COMPLIANCE WITH CONTAINER
DESIGN RETRIEVAL SYSTEM (CDRS) REQUIREMENTS
APPENDIX J - MILITARY PACKAGING REQUIREMENT CODES
INDEX
Sketches standard processes for the development and documentation of military packaging. Specifies methods of preservation to protect materiel against environmentally induced corrosion and deterioration, physical and mechanical damage, and other forms of degradation during storage, multiple handling, and shipment of materiel in the defense transportation system.
Committee |
AREA PACK
|
DevelopmentNote |
Supersedes PPP H 1581 (A), MIL STD 2073/2, MIL STD 1510, MIL P 116 & MIL M 55565. (03/2004) Supersedes MIL STD 794, MIL STD 647 & MIL STD 2073. (09/2004)
|
DocumentType |
Standard
|
Pages |
207
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
Supersedes |
MIL-C-24938 Revision A:1993 | COATS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
ASTM F 1145 : 2005 : R2011 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
MIL-I-25859 Revision C:1995 | INDICATOR, THRUST AEU-2/A, SYNCHRO STYLE, PRESSURE RATIO, 1.2-3.4 UNITS, INTEGRALLY LIGHTED |
SAE AS 7460 : 2017 | BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR |
MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
MIL-M-71213 Base Document:1995 | MOUNT, MACHINE GUN: MK93 MOD1 (DUAL MOUNT) |
MIL-H-7195 Revision G:1991 | HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR |
ASTM F 1567 : 1994 : R2006 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
MIL E 5589 : D | EARPHONE, (EXTENDED RANGE), H-301/U |
SAE AMS 3655D :2016 | TUBING, ELECTRICAL INSULATION, THIN WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) |
SAE AS 7237 : 2012 | RIVETS, NICKEL ALLOY, CORROSION AND HEAT RESISTANT 47.5NI-22CR-1.5CO-9.0MO-0.60W-18.5FE SOLUTION HEAT TREATED PROCUREMENT SPECIFICATION FOR |
MIL-P-24752 Base Document:1990 | PACKING MATERIAL, FLAX OR HEMP |
SAE AMS 2762 : 2018 | CARBURIZING - CARBON AND LOW-ALLOY STEEL PARTS |
MIL-M-16149 Revision G:1990 | MITTEN, WELDERS |
MIL-DTL-6060 Revision E:2004 | Bags, Watervaporproof, Heat-Sealable, Complex |
MIL-C-87248 Base Document:1987 | CAP, CAMOUFLAGE PATTERN (BASEBALL STYLE) |
MIL-J-87250 Base Document:1988 | JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER |
MIL-C-29632 Base Document:1990 | COAT, MAN'S, POLYESTER/WOOL, SERGE, FUSIBLE (COAST GUARD) |
MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
MIL I 2818 : C | INSULATION BLANKET, THERMAL, FIBROUS MINERAL |
MIL H 26385 : E | HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT |
MIL-DTL-55235 Revision A:2003 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION |
MIL-O-24905 Revision B:1990 | OVERCOAT, MAN'S, REEFER (COAST GUARD) |
SAE AMS 1379 : 2007 | COMPOUND, ALKALINE RUST REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS |
MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
MIL I 2781 : F | INSULATION, PIPE THERMAL |
MIL-DTL-12000 Revision K:2012 | CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF |
MIL-W-13855 Revision D:1973 | WEAPONS, SMALL ARMS AND AIRCRAFT ARMAMENT SUBSYSTEMS, GENERAL SPECIFICATION FOR |
SAE AMS 1384 : 2007 | ACID, INHIBITED PHOSPHORIC AIRCRAFT TURBINE ENGINE COMPONENTS ROOM TEMPERATURE APPLICATION |
MIL-DTL-85670 Revision D:2012 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A |
MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
MIL-M-24476 Revision B:1993 | MOUNT, RESILIENT, TYPES 7M5O, 6M15O, 6M45O AND 6M9OO |
J-W-1177 Revision B:1988 | WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION |
MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
MIL-H-87041 Revision B:1983 | HAT, SERVICE (WHITE) |
MIL-H-24776 Base Document:1992 | HYDRAZINE TEST KIT, NAVAL SHIPBOARD |
MIL P 6279 : L | PARKA, EXTREME COLD WEATHER, TYPE N 3B |
SAE AMS C 3901 : 1998 | ORGANIC FIBER (PARA-ARAMID), YARN AND ROVING, HIGH MODULUS |
MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
MIL-P-15280 Revision J:1988 | PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) |
MIL-T-21014 Revision D:1986 | TUNGSTEN BASE METAL, HIGH DENSITY |
MIL-C-87230 Revision A:1989 | Coveralls, Flyer\'s, CWU-64/P (No S/S Document) |
MIL-J-83388 Revision E:1992 | JACKETS, FLYERS, COLD WEATHER |
MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
MIL-S-23284 Revision A:1990 | STEEL FORGINGS, CARBON AND ALLOY, FOR SHAFTS, SLEEVES, COUPLINGS AND STOCKS (RUDDERS AND DIVING PLANES) |
MIL-C-19699 Revision E:1992 | Cloth, Coated (Nylon Taffeta) (No S/S Document) |
MIL-L-28654 Revision C:1988 | LIFTING, LAUNCHING AND SIDE CARRYING EQUIPMENT FOR PONTOONS ON 1179 CLASS LST VESSELS |
MIL-C-82283 Revision C:1991 | CLOTH, TWILL, COTTON, LIGHTWEIGHT |
MIL I 27197 : C | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED |
MIL H 26626 : D | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, OXYGEN |
MIL-A-5885 Revision D:1987 | ACCELEROMETER, AIRCRAFT |
MIL-A-22145 Revision C:1992 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
MIL-I-16411 Revision F:1988 | INSULATION FELT, THERMAL, GLASS FIBER |
MIL-C-24903 Revision B:1990 | CLOTH, ELASTIQUE, POLYESTER/WOOL |
MIL-C-3131 Revision F:1995 | CORDAGE, PACKING OF |
SAE AS 85560 : 2013 | BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
MIL-H-18158 Revision E:1990 | HOSE ASSEMBLY, AIR DUCT, LOW PRESSURE, FABRIC, WIRE STIFFENED, RETRACTABLE, NAVAL SHIPBOARD PORTABLE VENTILATING SET USE |
MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
MIL A 46177 : B | ARMOR, STEEL PLATE & SHEET, WROUGHT, HOMOGENEOUS (1/8 TO LESS THAN 1/4 INCH THICK) |
MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
SAE AMS 3680 : 2015 | Insulation, Thermal Silica Fiber(STABILIZED May 2015) |
MIL M 17508 : F | MOUNTS, RESILIENT: TYPES 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, AND 6E900BB |
MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
MIL-C-24500 Revision A:1990 | CLOTH, DRAPERY, BUNK CURTAIN, SLIPCOVERS AND LABELS, FIRE RETARDANT |
MIL-S-87214 Revision B:1992 | SHIRTS, MEN'S, LONG AND SHORT SLEEVES, POLYESTER/COTTON (DURABLE PRESS) |
MIL-B-28635 Revision D:1990 | BOOKSHELF FOR BUNK BED |
MIL-T-87038 Revision D:1990 | TROUSERS, MEN'S (BLUE, ENLISTED) |
MIL-C-38182 Revision C:1990 | COVER, SERVICE CAP, MANS WATER REPELLENT |
MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
MIL C 39028 : C | CAPACITORS, PACKAGING OF |
MIL-DTL-4710 Revision E:2006 | CASE SET, TRANSPORT AND STORAGE |
MIL-A-83162 Revision A:1989 | AMPLIFIER, SYNCHRO, SIGNAL AM-6015/A |
MIL-HDBK-773 Revision A:2005 | ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING |
SAE AS 7235 : 2012 | RIVETS, UNS S66286, STEEL, CORROSION AND HEAT RESISTANT, 80 KSI SHEAR STRENGTH, PROCUREMENT SPECIFICATION FOR |
MIL-DTL-13139 Revision F:2010 | Charge, Demolition, Shaped, 15 Lb.-M2A4 Parts for |
MIL T 2118 : 0 | TRAP, STEAM, THERMOSTATIC, NAVAL SHIPBOARD USE |
MIL-DTL-50872 Revision D Interim Revision:2004 | CARTRIDGE, 40 MM: HEDP, M433 |
SAE MA 1573 : 2016 | NUT, SELF-LOCKING, STEEL, CLASS 1100 MPA/235 DEGREES C, MJ THREAD PROCUREMENT SPECIFICATION FOR, METRIC |
MIL T 5780 : D NOTICE 1 | TRANSMITTER, PRESSURE, MANIFOLD 10-75 INCH MERCURY |
MIL M 9950 : A NOTICE 1 | MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
MIL-T-24708 Base Document:1988 | THERMAL/ACOUSTIC INSULATION BARRIER MATERIAL: POLYIMIDE FOAM |
MIL T 24487 : A | TILE, RUBBER VIBRATION DAMPING, TYPE MIRL NO. 3 |
MIL-C-87160 Revision A:1988 | COAT, WOMAN'S (PANTS SUIT) |
MIL T 8878 : D | TURNBUCKLE, POSITIVE SAFETYING |
MIL-DTL-48683 Revision B Interim Revision:2004 | CARTRIDGE 40 MM PRACTICE - TP M918 - PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
MIL-C-87064 Revision B:1992 | CLOTH, DENIM, COTTON/POLYESTER |
MIL-T-24747 Base Document:1991 | TECHNICAL REPAIR STANDARDS (TRS) MANUAL; PREPARATION OF |
SAE AS 5861 : 2015 | RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, STATIC GLAND |
MIL-DTL-28791 Revision D:2016 | ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
MIL-DTL-19491 Revision J:2014 | SEMICONDUCTOR DEVICES, PACKAGING OF |
MIL M 62338 : A | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF |
MIL-V-81356 Revision B:1992 | VALVE, FUEL SYSTEM PRESSURIZATION AND VENT |
ZZ-G-710 Revision B:1993 | GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS |
SAE AS 7330 : 2012 | RINGS, RETAINING - SPIRAL WOUND, UNIFORM SECTION CORROSION RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
SAE AMS 4751 : 2017 | TIN - LEAD EUTECTIC 63SN - 37PB |
SAE AS 1710 : 2014 | COUPLING, FUEL, FLEXIBLE, VARIABLE CAVITY, THREADED TYPE WITH FERRULES |
SAE AS 7228 : 2015 | RIVETS, STEEL, CORROSION RESISTANT 18CR-9NI, SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR |
SAE AS 7768 : 2016 | LIGHT, DESK, AIRCRAFT |
SAE AS 7473 : 2018 | BOLTS AND SCREWS, ROLL THREADED PROCUREMENT SPECIFICATION FOR |
SAE AS 5782 : 2015 | RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, UN-CUT, FOR USE IN AS4716 GLANDS |
SAE AS 23190 : 2015 | WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
SAE MA 1943 : 2012 | NUTS, SELF-LOCKING, UNS N07001, 760 DEGREE C, 1100 MPA AND 1210 MPA, PROCUREMENT SPECIFICATION FOR, METRIC |
SAE AS 5860 : 2014 | RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, STATIC GLAND |
SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
SAE AS 4108 : 2018 | T-BOLT AND EYE BOLT, A286 CRES, 1000 DEGREES F FATIGUE RATED |
SAE AMS 3670/1 : 2004 | UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES |
SAE AMS 3806F : 2013 | CLOTH, AIRPLANE, MERCERIZED COTTON, 80 POUNDS FORCE (356 N) BREAKING STRENGTH |
SAE ARP 1953 : 2014 | ACCEPTANCE TEST PROCEDURES AND STANDARDS TO ENSURE CLEAN FUEL SYSTEM COMPONENTS |
MIL-STD-419 Revision E:2010 | CLEANING, PROTECTING, AND TESTING PIPING, TUBING, AND FITTINGS FOR HYDRAULIC POWER TRANSMISSION EQUIPMENT |
MIL-E-24269 Revision B:1988 | EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE |
DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
F-F-2790 Base Document:1991 | FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION |
MIL-STD-3003 Revision B:2007 | VEHICLES, WHEELED: PREPARATION FOR SHIPMENT AND STORAGE OF |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
MIL-DTL-28731-19 Revision E:2004 | Connector, Electrical, Rectangular Shield for 20, 38, 56, 90 or 120 Removable Contacts |
MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
MIL-C-55442 Revision B:1985 | CABLE ASSEMBLIES AND CORD ASSEMBLIES, PACKAGING OF |
MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
MIL-I-24683 Revision A:1990 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
MIL-P-46843 Revision C:1989 | PRINTED WIRING ASSEMBLIES PRODUCTION OF |
MIL T 28800 : E | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
BB-E-2879 Revision A:2001 | EXTINGUISHER, FIRE, CARBON DIOXIDE (CO[2]), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE |
MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
MIL-DTL-45360 Revision J:2016 | CARRIERS, PERSONNEL, FULL-TRACKED, ARMORED: M113A2 AND M113A3; MORTARS, SELF-PROPELLED: M106A2 (107MM), M125A2 (81MM) AND M1064, M1064A3 (120MM); SMOKE GENERATORS: M1059, M1059A3 AND M58; PROCESSING FOR STORAGE AND SHIPMENT OF |
MIL-DTL-55507 Revision F:1997 | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT) PACKAGING OF |
MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
MIL-DTL-28731-24 Revision D:2004 | Connector, Electrical, Rectangular Shield, for 120 Removable Contacts |
DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
ASTM F 1145 : 2005 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
MIL-DTL-24317 Revision B:2010 | SWITCHES, MULTISTATION, PUSHBUTTON, ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
MIL V 7891 : E | VALVE, OXYGEN FILLER, LOW AND PRESSURE |
MIL-C-16290 Revision K:1991 | CLOTH, MELTON, WOOL (MOTH PROOFED) |
MIL-D-17650 Revision B:1988 | DISK, VALVE, RUBBER, INSERT TYPE |
MIL-C-48481 Revision C:1995 | CIRCUIT CARD ASSEMBLY - FTS INPUT SIMULATER AND DL TEST |
MIL-M-87113 Revision A:1993 | MASK, OXYGEN, MBU-10/P |
P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
SAE AMS 3831 : 2016 | CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH |
SAE AS 7234 : 2012 | RIVETS, BLIND, CORROSION RESISTANT ALLOY 67 NI - 31 CU PROCUREMENT SPECIFICATION FOR |
MIL-T-41834 Revision G:1990 | TROUSERS, MEN'S POLYESTER & COTTON |
SAE AMS 3652 : 2015 | POLYTETRAFLUOROETHYLENE (PTFE) FILM, NON-CRITICAL GRADE |
SAE MA 3399 : 2012 | CLAMP - TUBE SUPPORT, SPRING CLIPS AND PTFE CUSHION PROCUREMENT SPECIFICATION FOR |
SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
SAE AMS 3826 : 2016 | CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER RESIN IMPREGNATED, 1581 AND 7781 TYPE FABRIC |
SAE AMS 3670 : 2003 | POLYAMIDE-IMIDE BAR, ROD, & SHAPES, MOLDED OR EXTRUDED |
MIL-C-12684 Revision D:1989 | CANNON, 155 MM HOWITZER: M1A1 CANNON, 155 MM HOWITZER: M1A2 |
SAE AMS 1540 : 2015 | CLEANER, THRUST REVERSER, WATER-BASE |
MIL-G-16265 Revision F:1993 | GASKETS, METALLIC-FLEXIBLE GRAPHITE AND METALLIC ASBESTOS, SPIRAL WOUND (FOR NAVY FLANGED JOINTS IN PIPING SYSTEMS) |
MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
MIL-C-0024196 Revision B:1991 | CLEANING SYSTEMS, ULTRASONIC |
SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
MIL-C-24196 Revision A:1988 | CLEANING SYSTEM, ULTRASONIC |
MIL-STD-1904 Revision B:2016 | Test Standards for Level A and Level B Packaging for Conventional Ammunition |
SAE MA 4368 : 2018 | NUT, PLAIN ROUND - SPANNER WRENCHING, SHAFT MOUNTED, UNS S66286, PROCUREMENT SPECIFICATION FOR, METRIC |
MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
MIL P 24583 : B | PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN |
MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
MIL-DTL-39028 Revision F:2013 | CAPACITORS, PACKAGING OF |
MIL-C-15104 Revision F:1991 | Cloth, Coated, Flame Resistant, Berth and Bedding Cover (No S/S Document) |
ASTM F 1567 : 1994 : R2001 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
ASTM F 1567 : 1994 : R2013 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
SAE AS 7211 : 2012 | PIN, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100 PROCUREMENT SPECIFICATION |
GG-T-356 Revision B:1998 | Thermometer, Self Indicating, Liquid in Glass, Minimum, (Meteorological) |
MIL-F-8839 Revision A:1988 | Fittings, Lubrication Drive Type |
MIL-G-24716 Revision A:1993 | GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND |
MIL-DTL-75 Revision K:2007 | ELECTRON TUBES, PACKAGING OF |
SAE ARP 5812 : 2017 | ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE |
MIL-B-24781 Base Document:1993 | BATTERBOARD SYSTEMS, SYNTHETIC |
MIL E 24416 : B | EXTINGUISHING SYSTEM, FIRE, FIXED, AQUEOUS POTASSIUM CARBONATE FOR RANGE AND EXHAUST SYSTEMS (SHIP AND SHORE USE) |
SAE AMS 4997 : 1977 | TITANIUM ALLOY POWDER 5AL - 2SN - 2ZR - 4CR - 4MO - 0.100 PREMIUM QUALITY |
MIL-A-27471 Revision C:1993 | ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A |
SAE AMS 3811 : 2016 | Rods, Aramid Fiber, Polyester Resin Coated Pultrusion |
SAE AMS P 29609 : 2016 | POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC |
MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
MIL-R-17882 Revision E:1993 | REPAIR KIT, METALLIC PIPE AND GENERAL PURPOSE, DAMAGE CONTROL |
MIL G 16356 : D | GAGE, BOILER WATER, DIRECT READING |
MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
MIL-I-24703 Base Document:1988 | INSULATION, PIPE, POLYPHOSPHAZENE, SHEET AND TUBULAR |
MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
SAE MA 7211 : 2012 | PINS, COTTER, STEEL, CORROSION AND HEAT RESISTANT UNS S32100, METRIC PROCUREMENT SPECIFICATION FOR |
SAE AMS 3263 : 1997 | SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE FOR AIRCRAFT STRUCTURES, FUEL RESISTANT WITH INTERMITTENT USE TO 400 MDCF (204 MDCC) |
MIL-G-29635 Base Document:1990 | GLOVES, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
MIL-C-24916 Revision A:1991 | CLOTH, CHAMBRAY, COTTON (FLAME RETARDANT TREATED) |
MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
SAE AMS 3837 : 2016 | Cloth, Type "S" Glass 181 Style Fabric, Finish No. HTS-904 |
SAE AMS1550B:1995(R2012) | CLEANER, WATER BASE, AIRCRAFT INTERIOR HARD SURFACE MATERIALS |
SAE AS7283B : 2012 | GASKETS, TYPE 20 ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED CONTROLLED PERFORMANCE |
SAE AS 21608 : 2012 | FERRULE, SHIELD TERMINATING, CRIMP STYLE |
SAE AS 39901 : 2012 | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
SAE AMS 3668 : 2011 | POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, PREMIUM GRADE, AS SINTERED |
SAE AS 45909 : 2015 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
SAE AS 7236 : 2012 | RIVETS, ALLOY, CORROSION AND HEAT RESISTANT 52CO-20CR-10NI-15W SOLUTION HEAT TREATED PROCUREMENT SPECIFICATION FOR |
SAE AMS 3828 : 2016 | GLASS ROVING, EPOXY RESIN PREIMPREGNATED, TYPE E GLASS |
SAE AMS 3824 : 2013 | CLOTH, GLASS, FINISHED FOR RESIN LAMINATES |
SAE MA 2538 : 2015 | GASKET, METAL C-RING SEAL NICKEL ALLOY, CORROSION AND HEAT RESISTANT, METRIC PROCUREMENT SPECIFICATION FOR |
SAE AMS 2405E: 2013 | ELECTROLESS NICKEL PLATING, LOW PHOSPHORUS |
SAE AS 82819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
GGG-G-521 Revision E:1988 | GOGGLES, INDUSTRIAL, RESILIENT FRAME |
SAE AS 7222 : 2013 | ALUMINUM RIVETS, UNS A92117 2.5Cu - 0.3Mg (2117-T4) - PROCUREMENT SPECIFICATION |
SAE AMS 3662 : 2015 | POLYTETRAFLUOROETHYLENE FILM, GENERAL PURPOSE GRADE |
NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
SAE AMS 3832 : 2016 | ROVING, TYPE 'S-2' GLASS, EPOXY RESIN IMPREGNATED |
MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
SAE AMS 1431 : 2012 | COMPOUND, SOLID RUNWAY AND TAXIWAY DEICING/ANTI-ICING |
SAE AS 50571 B : 2016 | LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
O-S-635 Revision E:2007 | SODIUM POLYPHOSPHATES, TECHNICAL |
MIL-T-10646 Revision D:1988 | Telescope, Straight: M90 Series, M90A2 and M90A3 |
SAE AMS 3653 : 2016 | TUBING, ELECTRICAL INSULATION, STANDARD WALL, EXTRUDED POLYTETRAFLUOROETHYLENE (PTFE) |
MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
SAE AMS 2439 : 2000 | SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, HARD DEPOSIT |
MIL A 24533 : B | ACTUATORS, ROTARY HYDRAULIC RACK AND PINION |
SAE AMS 3686 : 2014 | ADHESIVE, POLYIMIDE RESIN, FILM AND PASTE HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F) |
SAE MAM 5401 : 2003 | NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI - 21.5CR - 9.0MO - 3.6CB VACUUM MELTED, VACUUM CAST AS CAST |
SAE AMS 1383 : 2007 | OXIDE CONDITIONER, ALKALINE PERMANGANATE AIRCRAFT TURBINE ENGINE COMPONENTS |
SAE AMS 1380 : 2007 | SCALE CONDITIONER, ALKALINE, AIRCRAFT TURBINE ENGINE COMPONENTS |
MIL-DTL-45585 Revision E Interim Revision:2004 | Link, Cartridge - Metallic Belt, 40 Millimeter - M16A2 |
SAE AMS 1320 : 1995 | REMOVER, DECAL ADHESIVE |
MIL-T-87067 Revision C:1990 | TROUSER, MEN'S, (ENLISTED, WHITE) |
SAE AMS 3817 : 2016 | NYLON BRAID, FLAT ELECTRICAL TYING RESIN COATED |
MIL-T-47248 Revision A:1991 | TAPE, PLASTIC, HEAT-SEALING, PERFORATED |
SAE AMS 3906 : 2016 | GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP |
SAE AMS 7482 : 1995 | STUDS - STEEL, CORROSION AND HEAT RESISTANT,ROLL THREADED AFTER HEAT TREATMENT, 1800F (980 C) SOL HEAT TREATED |
MIL-B-87258 Base Document:1991 | BAG, SLEEPING, ARCTIC SURVIVAL, PRESSURE/VACUUM PACKED |
SAE AMS 3898 : 2014 | INTERLEAF CARRIER MATERIAL, COMPOSITE TAPE OR BROADGOODS PAPER, 0.004 INCH (0.10 MM), PERFORATED |
SAE AS 7232 : 2012 | RIVETS, SOLID AND TUBULAR, NICKEL ALLOY CORROSION AND HEAT RESISTANT 74NI - 15.5CR - 8.0FE PROCUREMENT SPECIFICATION FOR |
SAE AMS 3023 : 2017 | FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL |
SAE AS 81914 : 2016 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
SAE AMS 3829 : 2016 | CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC, SOLUTION-ADDITION-TYPE PMR 15 POLYIMIDE RESIN IMPREGNATED |
MIL-C-82243 Revision F:1993 | COVERALLS, RADIOACTIVE CONTAMINANTS, PROTECTIVE |
MIL-H-24460 Revision B:1988 | HARNESS, SAFETY, AND LANYARDS, SAFETY AND WORKING |
MIL T 5350 : E | TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL V 87223 : 0 | VALVE, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
MIL-P-24503 Revision B:1991 | PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING |
MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
MIL-J-87035 Revision D:1994 | JUMPER, MAN'S (BLUE, DRESS) |
MIL-M-29460 Base Document:1990 | MODULE, WATER PUMP (SIXCON) |
MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
MIL-P-48494 Revision A:1995 | |
SAE AMS 3729 : 2014 | EPOXY RESIN MATRIX, THERMOSETTING MODERATE TEMPERATURE RESISTANT, UNFILLED |
MIL-STD-1388-2 Revision B:1991 | DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD |
MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
MIL-C-14385 Revision D:1991 | CANNON, 40 MM DUAL AUTOMATIC GUN: M2A1 AND CLIP, CHARGER: M3 |
MIL-C-24910 Revision B:1992 | CLOTH, TROPICAL: POLYESTER AND WOOL |
MIL-S-24950 Base Document:1989 | SHIRT, MANS, DRESS WHITE, LONG SLEEVE |
MIL W 3459 : D | WIPER, WINDOW, ELECTRIC, PENDULUM TYPE (MARINE SERVICE, HEAVY DUTY) |
MIL-C-24927 Revision A:1991 | CLOTH, TWILL, POLYESTER/COTTON (DURABLE PRESS) |
MIL-I-26382 Revision C:1994 | INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-4 AND A/A24J-8 |
MIL T 5882 : D | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
MIL C 24712 : A | COATINGS, POWDER (METRIC) |
MIL I 5184 : B | INDICATOR, POSITION |
MIL-D-8804 Revision B:1993 | DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-STD-1359 Revision B:1987 | CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
MIL-G-24717 Base Document:1989 | GASKET, SHEET, REFRIGERATION, NON-ASBESTOS |
MIL-B-24692 Revision A:1993 | BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC) |
SAE AMS 3847 : 1994(S2016) | CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F) |
MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
MIL-H-16384 Revision E:1988 | HYDROMETER SETS AND PARTS, SYRINGE, LEAD-ACID STORAGE BATTERY TESTING |
SAE AS 7246 : 2012 | INSERTS, SCREW THREADS, HELICAL COIL 72NI-15.5CR-0.95(CB+TA)-2.5TI-0.70AL-7.0FE CORROSION AND HEAT RESISTANT ALLOY PROCUREMENT SPECIFICATION FOR |
MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
SAE AS 8942 : 2014 | BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING |
MIL G 24696 : B | GASKET, SHEET, NON-ASBESTOS |
SAE AS 81819 : 2010 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
MIL-S-12227 Revision F:1989 | Suit, Toxicological Agents Protective Cover, Cooling (No S/S Document) |
SAE AMS 3845 : 2016 | CLOTH, TYPE 'E' GLASS, 'B' STAGE ADDITION CURE POLYIMIDE-RESIN-IMPREGNATED |
MIL-C-29627 Base Document:1990 | COVERALLS, CATAPULT CREWMEN'S (FLAME RESISTANT) |
MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
MIL C 24758 : 0 | CONDUIT, FLEXIBLE, WEATHERPROOF & ASSOCIATED FITTINGS |
GEIASTD0007B:2013 | LOGISTICS PRODUCT DATA |
MIL-R-48628 Revision A:1993 | RACK, STORAGE, SMALL ARMS: M14 |
MIL I 6839 : C | INDICATOR, POSITION, LANDING GEAR |
MIL-L-24943 Revision A:1993 | LINER, FIREMAN'S COAT, QUILTED |
MIL V 7560 : C | VALVE ASSEMBLY, OXYGEN CYLINDER, BAILOUT |
SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
SAE AMS 3628 : 2011 | PLASTIC EXTRUSIONS AND MOLDINGS, POLYCARBONATE, GENERAL PURPOSE |
MIL-E-24743 Base Document:1991 | ENCLOSURE, COMMON ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION |
SAE AS 19692 : 2016 | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
MIL-DTL-28731-38 Revision A:2004 | Connector, Electrical, Rectangular Shield, for use with MIL-DTL-28731/32 |
MIL-M-63221 Revision A:1992 | MORTAR, 60MM, M224 (WITHOUT M64 SIGHT UNIT) |
AFGS-87234 Revision A:1991 | PERSONAL PROTECTIVE EQUIPMENT, AIRCREW |
MIL-STD-1660 Revision A:2008 | DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS |
SAE AMS 1382 : 2007 | OXIDE REMOVER COMPOUND, ACIDIC AIRCRAFT TURBINE ENGINE COMPONENTS |
MIL-DTL-28731-37 Revision A:2004 | Connector, Electrical, Rectangular Shield, for Female Rectangular 165 Removable Type Contacts |
MIL-T-24944 Base Document:1989 | TROUSERS, FLIGHT DECK, CREWMEN'S |
SAE AS 7210 : 2012 | PINS, COTTER, STEEL, CORROSION RESISTANT UNS S30200 PROCUREMENT SPECIFICATION FOR |
MIL S 83734 : F | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
SAE AS 13591 : 2001 | CLEANING METHODS &PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
SAE ARP 1616 : 2017 | SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS |
SAE AMS 2680 : 2010 | ELECTRON-BEAM WELDING, FOR FATIGUE CRITICAL APPLICATIONS |
SAE AMS 3710 : 2014 | SANDWICH STRUCTURES, GLASS FABRIC-RESIN, LOW PRESSURE MOLDED, HEAT RESISTANT |
SAE AMS 3844 : 2016 | Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated |
SAE AMS 1526 : 2008 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE |
SAE AS 7454 : 2016 | BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT 135000 PSI TENSILE STRENGTH, NORMALIZED AND TEMPERED, ROLL THREADED |
SAE AS 7458 : 2016 | STUDS, STEEL, LOW ALLOY, HEAT RESISTANT NORMALIZED AND TEMPERED, ROLL THREADED 135000 PSI TENSILE STRENGTH |
SAE AS 7233 : 2012 | RIVETS, SOLID, UNS N04400, CORROSION RESISTANT 67NI - 31CU PROCUREMENT SPECIFICATION FOR |
SAE AS 85421 : 2015 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR |
SAE AMS 3377 : 2015 | SEALING COMPOUND, ELECTRICALLY CONDUCTIVE CORROSION INHIBITING |
SAE AMS 3359 : 2016 | SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY |
SAE AMS C 7438 : 2014 | CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
SAE AMS 1385 : 2004 | COMPOUND, HOT CARBON AND PAINT REMOVER AIRCRAFT TURBINE ENGINE COMPONENTS |
SAE ARP 4379 : 2016 | AEROSPACE - ACCUMULATOR, HYDRAULIC, CYLINDRICAL, PISTON SEPARATED |
SAE AS 81703 : 2012 | CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
SAE AMS 3812 : 2016 | RODS, GLASS FIBER, POLYESTER RESIN, LOADED PULTRUSION |
SAE AMS 3705 : 2014 | EPOXY RESIN, CYCLOALIPHATIC LIQUID |
SAE MAM 4778 : 2003 | NICKEL ALLOY, BRAZING FILLER METAL, 92NI - 4.5SI - 3.1B, 980 TO 1040 DEGREE C SOLIDUS-LIQUIDUS RANGE |
ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
SAE AMS 3666 : 2012 | POLYTETRAFLUOROETHYLENE (PTFE) SHEET, GLASS CLOTH REINFORCED |
SAE AS 4417A : 2014 | NUTS, SELF-LOCKING, ALLOY, CORROSION AND HEAT RESISTANT, HIGH STRENGTH, ALL METAL, SOLID FILM LUBRICATED, 1400 DEGREES F, PROCUREMENT SPECIFICATION |
SAE AMS 3091 : 2014 | MOLD RELEASE AGENT |
NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
NASA JSC 66491 : 2013 | STANDARD FOR JSC LEAD-FREE CONTROL PLANS (LFCP) |
MIL-DTL-2156 Revision D:2010 | CHARGE, DEMOLITION, SHAPED, 15 LB. - M2A4 LOADING, ASSEMBLING AND PACKING |
MIL-P-17171 Revision E:1990 | PLASTIC, LAMINATE, DECORATIVE, HIGH PRESSURE |
SAE AS 7229 : 2013 | RIVETS, STEEL, CORROSION AND HEAT RESISTANT, 18CR - 10.5NI - 0.70(CB+TA), SOLUTION HEAT TREATED, PROCUREMENT SPECIFICATION FOR |
SAE AMS 3612 : 2016 | POLYESTER FILM, ELECTRICAL GRADE, GENERAL PURPOSE |
SAE AMS 3803 : 2016 | WIPES, COTTON, LOOSELY WOVEN |
GGG-T-2761 Base Document:1991 | TONGS, MATERIAL LIFTING, PIPE |
SAE AS7245:2012 | INSERTS, SCREW THREAD, HELICAL COIL 19CR-9.2NI, CORROSION RESISTANT STEEL, PROCUREMENT SPECIFICATION FOR |
MIL F 87260 : 0 | FOAM MATERIAL, EXPLOSION SUPPRESSION, INHERENTLY ELECTRICALLY CONDUCTIVE, FOR AIRCRAFT FUEL TANK & DRY BAY AREAS |
SAE AMS 3692 : 2014 | ADHESIVE COMPOUND, EPOXY RESIN, HIGH TEMPERATURE APPLICATION |
MIL C 4710 : D | CASE SET, TRANSPORT AND STORAGE |
MIL-C-87074 Revision B:1991 | CLOTH, TWILL, ACETATE |
MIL I 25689 : A NOTICE 1 | INDICATOR, ELECTRICAL TACHOMETER |
MIL-B-87986 Base Document:1989 | BEAD BREAKER, PNEUMATIC TIRE |
MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
MIL C 83867 : B | CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE |
SAE AMS 3683 : 2017 | TUBING, IRRADIATED MODIFIED FLUOROPOLYMER PLASTIC, ELECTRICAL INSULATION FLAME RESISTANT, FLEXIBLE, HEAT-SHRINKABLE, 2 TO 1 SHRINK RATIO |
MIL-R-43838 Revision B:1993 | RELEASE, CARGO PARACHUTE, AIRDROP, M-2 |
MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
MIL-V-24690 Base Document:1987 | VEST INTEGRATED DIVERS |
MIL G 2857 : B | GLASS, HEAT TREATED, GLAZING, RECTANGULAR (FOR BRIDGE WINDOWS) |
MIL-R-11521 Revision G:1993 | RING, EXPANSION, HOSE, BRASS |
MIL S 19491 : G | SEMICONDUCTOR DEVICE, PACKAGING OF |
SAE AS 5781 : 2015 | RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, SCARF-CUT, FOR USE IN AS4716 GLANDS |
MIL C 24788 : 0 | COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH |
MIL-DTL-55661 Revision C:2002 | CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837( )/U |
MIL-C-48480 Revision C:1995 | CIRCUIT CARD ASSEMBLY - LOGIC AND REFERENCE |
MIL-DTL-28786 Revision D:2014 | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
PPP-P-40 Revision C:1998 | PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY |
MIL M 7793 : F | METER, TIME TOTALIZING |
MIL-B-22036 Revision D:1991 | BRIDLE AND PENDANT ASSEMBLIES, AIRCRAFT LAUNCHING |
GG-M-2742 Base Document:1991 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 600 GPM |
SAE AS 7455 : 2016 | BOLTS AND SCREWS, STEEL, LOW ALLOY, HEAT RESISTANT HARDENED AND TEMPERED, ROLL THREADED |
MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
MIL-V-27296 Revision C:1993 | VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION |
SAE AMS 3670/3 : 2004 | POLYAMIDE-IMIDE BAR, ROD, AND SHAPES, 12% GRAPHITE - 3% POLYTETRAFLUOROETHYLENE FILLED |
MIL M 24784 : NOTICE 1 | MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS |
MIL T 38230 : B (1) | TRANSMITTER, PRESSURE TRU 66/A OIL, VARIABLE RELUCTANCE |
MIL-P-28584 Revision B:1989 | PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR CONDENSATE RETURN LINES |
MIL-I-6514 Revision B:1988 | INDICATOR, OIL PRESSURE, 0-200 PSI, 320 DEGREE, TYPE B-9C |
SAE AMS 3865 : 2013 | FILAMENTS, BORON - TUNGSTEN SUBSTRATE, CONTINUOUS |
MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
MIL-L-3454 Revision G:1991 | LIFE PRESERVERS, PACKAGING OF |
MIL S 24749 : 0 | STRAPS, ELECTRICAL GROUNDING (METRIC) |
MIL-S-24700 Base Document:1988 | STUFFING TUBES FOR REFERENCE ELECTRODES, IMPRESSED CURRENT CATHODIC PROTECTION (METRIC) |
MIL-H-24729 Base Document:1990 | HARNESS, SAFETY, SWIMMERS |
MIL-T-24180 Revision A:1988 | TILE, RUBBER, UNDERWATER ACOUSTIC DECOUPLER |
MIL R 39032 : D | RESISTOR, PACKAGING OF |
MIL-J-29634 Base Document:1992 | JERSEY, FLIGHT DECK CREWMANS (FLAME-RESISTANT) |
MIL G 22050 : D | GASKET & PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM & AIR AT MODERATELY HIGH TEMPERATURES |
MIL-PRF-55585 Revision G:1997 | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
MIL-I-24768 Base Document:1992 | INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR |
SAE AMS 1386 : 2004 | COMPOUND, SILICONE RUBBER REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATIONS |
MIL-STD-3028 Base Document:2009 | JOINT MODULAR INTERMODAL CONTAINER |
SAE AS 7456 : 2016 | STUDS, STEEL, LOW ALLOY, HEAT TREATED, ROLL THREADED |
SAE AMS 2664 : 2014 | BRAZING, SILVER, FOR USE UP TO 800 DEGREES F (427 DEGREES C) |
MIL-DTL-81997 Revision D:2004 | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC-PROTECTIVE, TRANSPARENT |
ASTM F 1567 : 1994 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
MIL P 24790 : 0 | PACKING MATERIAL, BRAIDED, NON ASBESTOS |
MIL-P-22581 Revision C:1991 | PLASTIC SHEET, VIBRATION DAMPING (TYPE ML-D2) |
SAE AMS 3020 : 2013 | OIL, REFERENCE, FOR 'L' STOCK RUBBER TESTING |
MIL-B-63354 Revision A:1987 | |
MIL-B-85584 Revision B:1995 | BATTERY RELAY CONTROL UNIT, AIRCRAFT |
MIL-DTL-25421 Revision C:2009 | Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated |
MIL-HDBK-87234 Base Document:1976 | PERSONAL PROTECTIVE EQUIPMENT, AIRCREW |
MIL-C-14384 Revision D:1989 | CANNON, 105 MM HOWITZER, M2A2 |
MIL-G-15342 Revision E:1987 | GASKETS, METALLIC, SPIRAL WOUND FOR BOILERS |
SAE AS 4491 : 2012 | PLASTIC DISPOSABLE CARTRIDGE, PLUNGER, NOZZLES AND CARTRIDGE ASSEMBLY |
MIL M 19863 : D | MOUNT, RESILIENT, TYPE 5B5.000H |
MIL-S-24340 Revision A:1988 | SEALING COMPOUND, DECK, POLYURETHANE (POLYETHER BASE) |
MIL-HDBK-263 Revision B:1994 | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
MIL-M-55565 Revision C:1988 | MICROCIRCUITS, PACKAGING OF |
MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
MIL-P-236 Revision J:1992 | PIPE, CULVERT, NESTABLE |
MIL-I-38391 Base Document:1965 | INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE) |
MIL-L-00757 Revision B:1994 | LEAD STYPHNATE, NORMAL |
MIL V 87255 : 0 | VALVE, PRESSURE, ANTI-G SUIT, HIGH FLOW |
MIL-STD-758 Revision C:1990 | PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS |
MIL G 1149 : C | GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS |
SAE AMS 3846 : 2013 | CLOTH, QUARTZ, FINISHED FOR RESIN LAMINATES |
SAE AS 55151 : 2001 | PUMP, HYDRAULIC, RAM, HAND DRIVEN |
ASTM F 1145 : 2005 : R2017 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
SAE AMS 3867 : 2016 | BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED |
SAE AMS 1374 : 2004 | REMOVER, POLYURETHANE/EPOXY PAINT, ALKALINE, HOT-TANK TYPE |
SAE AS 7225 : 2015 | RIVETS, CARBON STEEL, PROCUREMENT SPECIFICATION FOR |
SAE AMS 3895 : 2016 | BROADGOODS AND TAPE, CARBON FIBER-EPOXY RESIN IMPREGNATED MULTI-PLY, UNIFORM FIBER |
SAE AMS 1448 : 2014 | SAND, AIRPORT SNOW AND ICE CONTROL |
SAE AMS 3267 : 1992 | SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
SAE AMS 3849 : 2016 | CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED |
SAE AS 7472 : 2015 | BOLTS AND SCREWS, STEEL, CORROSION RESISTANT 125000 PSI TENSILE STRENGTH ROLL THREADED |
SAE AS 7461 : 2015 | BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR |
SAE AMS 3704 : 2016 | ADHESIVE, CONTACT, POLYCHLOROPRENE (CR) RUBBER, RESIN MODIFIED |
SAE AMS 3647 : 2015 | POLYFLUOROETHYLENE PROPYLENE FILM AND SHEET |
SAE AMS 1539:1996(S2018) | CLEANING COMPOUND, TERPENE, CIRCUIT BOARD CLEANER |
SAE AS 7207 : 2012 | SPRING PINS, TUBULAR, SLOTTED CORROSION AND MODERATE HEAT RESISTANT STEEL PROCUREMENT SPECIFICATION FOR |
SAE AMS 2441 : 2000 | SELECTIVE (BRUSH) NICKEL PLATING LOW-STRESSED, LOW HARDNESS DEPOSIT |
ASTM D 7932 : 2017 | Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments |
SAE AMS 3890 :2011(S2016) | GRAPHITE YARN, NON-STRUCTURAL - 5 PLY YARN, 720 FILAMENTS |
MIL-C-29107 Revision C:1989 | COAT, MANS POLYESTER/WOOL SUMMER |
MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
SAE AMS 1371 : 2007 | COMPOUND, RUST REMOVER, SOLID/POWDER AIRCRAFT AND AEROSPACE COMPONENTS, IMMERSION TANK METHOD |
MIL-HDBK-701 Revision C:1989 | BLOCKING, BRACING AND SKIDDING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
MIL-R-23074 Revision C:1990 | RUBBER TILE, RUBBER-AIR-LEAD-TYPE (RAL) |
MIL-T-8598 Revision B:1990 | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, FLUSH-MOUNTED, FREE AIR |
MIL-I-25120 Revision C:1993 | INDICATOR, INSTRUMENT LANDING, AIRPORT RUNWAY |
MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
MIL-PRF-23199-1 Revision B:2010 | PACKAGING, PACKING AND MARKING (PP&M) REQUIREMENTS FOR INSTRUMENTATION AND CONTROL EQUIPMENT |
MIL-V-83271 Revision B:1992 | VEST, SURVIVAL, MESH NET, SRU-21/P |
MIL-S-47129 Revision A:1988 | SILICON DIOXIDE, MICROFINE |
MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
MIL-C-24756 Base Document:1990 | CURTAINS & BLANKETS, SMOKE, PORTABLE |
MIL-F-62668 Base Document:1989 | FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT |
MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
MIL-W-44027 Revision A:1980 | WEDGE KIT, RAMP BUNDLE DELIVERY SYSTEM, C-130 AIRCRAFT |
MIL-T-26609 Revision C:1994 | Transmitter, Position |
MIL-T-45542 Revision D:1990 | TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF |
SAE AMS 1378 : 1995 | COMPOUND, CARBON SOIL AND PAINT REMOVER, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION |
MIL-R-29583 Base Document:1992 | RADIO SET |
MIL-I-25482 Revision D:1993 | INDICATOR, ENGINE TESTING |
MIL-C-23952 Revision C:1992 | CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM |
MIL-C-31003 Base Document:1992 | COVERALLS, UTILITY |
SAE AMS 3913 : 2014 | RADOME, FOAM SANDWICH, HOT-MELT, ADDITION-TYPE POLYIMIDE |
SAE AMS 1534 : 2013 | CLEANER, AIRCRAFT GLASS WINDOW |
MIL-P-4861 Revision C:1991 | PACKING, PREFORMED, RUBBER PACKAGING OF |
ASTM D 4169 : 2016 : REDLINE | Standard Practice for Performance Testing of Shipping Containers and Systems |
SAE AMS 1387B : 2004(S2018) | REMOVER, ANTI GALLING COMPOUND, AIRCRAFT TURBINE ENGINE COMPONENTS, ROOM TEMPERATURE APPLICATION |
MIL A 5498 : D | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
MIL-I-27672 Revision B:1987 | INDICATOR, POSITION ALU-4/1, HORIZONTAL STABILIZER |
MIL-A-27670 Revision D:1994 | AMPLIFIER-INDICATOR GROUP, INDICATED AIRSPEED A/A24G-10 |
MIL-A-83212 Revision A:1976 | ALTIMETER, PRESSURE AAU-27/A |
SAE AMS 2468 : 1999 | HARD ANODIC COATING TREATMENT OF ALUMINUM ALLOYS |
SAE AMS 3085 : 2016 | FLUID, REFERENCE FOR TESTING AS5780 HPC CLASS (POLYOL) RESISTANT MATERIAL (ALSO KNOWN AS EASTMAN REFERENCE OIL 300) |
MIL-H-82244 Revision F:1993 | HOOD, RADIOACTIVE CONTAMINANTS, PROTECTIVE |
MIL-I-7721 Revision D:1992 | INDICATOR, VERTICAL SPEED, 3-INCH |
MIL D 17951 : E | DESK COVERING, LIGHTWEIGHT, NONSLIP, SILICON CARBIDE PARTICLE COATED FABRIC FILM, OR COMPOSITE AND SEALING COMPOUND |
SAE AMS 7295 : 1993 | RADIOGRAPHIC FILM AND PAPER, INDUSTRIAL GRADE |
SAE AS 22145 : 2012 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
SAE AMS 3728 : 2014 | EPOXY CRESOL NOVOLAC RESIN LOW MOLECULAR WEIGHT |
MIL-STD-31000 Revision A:2013 | Technical Data Packages |
MIL-C-31002 Base Document:1992 | CAP, GARRISON, MANS (COAST GUARD) |
MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
MIL I 27189 : D | INDICATOR, PRESSURE OIL |
MIL-I-27673 Revision C:1993 | INDICATOR, TRUE AIRSPEED AVU-15/A |
MIL-I-5914 Revision E:1993 | INDICATOR, RATE OF FLOW, FUEL TYPE EFU 24/A AND TYPE EFU 25/A |
MIL-C-24915 Revision A:1991 | CLOTH, DENIM, COTTON (FLAME RETARDANT TREATED) |
MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
SAE AMS 2467 : 2016 | HARD ANODIC COATING OF MAGNESIUM ALLOYS ALKALINE TYPE, HIGH VOLTAGE |
SAE AS 7949 : 2004 | BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
MIL-L-24778 Base Document:1992 | LIFE PRESERVER, UTILITY, AUTO INFLATABLE, MK 5, MOD 0 |
MIL-T-38350 Revision D:1992 | TROUSERS, PARARESCUE CWU-15/P |
MIL-I-27848 Revision B:1994 | INDICATOR, HORIZONTAL SITUATION AQU-4/A |
MIL-L-85314 Revision A:1983 | LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR |
MIL-D-51091 Revision J:1986 | DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500-GALLON, M12A1 |
MIL-I-5415 Revision C:1987 | INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR |
MIL-S-70344 Base Document:1990 | SHIM, LAMINATED - GENERAL SPECIFICATION FOR |
MIL-R-87017 Revision B:1991 | RIBBON, POLYESTER, GROSGRAIN (CG) |
MIL C 7554 : F | CONTAINER KIT, AIRDROP |
MIL D 83753 : NOTICE 2 | DISPENSER, BOMB, TYPE SUU-21/A |
MIL-E-24715 Base Document:1989 | EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211) |
EIA 836 CD : B2010(R2015) | CONFIGURATION MANAGEMENT DATA EXCHANGE AND INTEROPERABILITY |
RR-C-271 Revision G:2016 | CHAINS AND ATTACHMENTS, CARBON AND ALLOY STEEL |
MIL-R-5049 Revision D:1989 | RING, WIPER, PISTON ROD |
MIL-T-24940 Revision A:1993 | TROUSERS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
MIL-C-5414 Revision G:1993 | COMPUTER, AIR NAVIGATION DEAD RECKONING TYPE MB 4A AND TYPE CPU 26A/P |
MIL-C-24918 Revision B:1992 | COAT, ALL-WEATHER, MAN'S, WITH REMOVABLE LINER |
MIL-T-5583 Revision C:1987 | Transmitter, Position, 28 Volts DC |
MIL-C-2202 Revision H:1990 | COVERALLS, MENS COTTON SATEEN |
MIL-C-87052 Revision B:1990 | CLOTH, TWILL, POLYESTER, WHITE |
MIL C 882 : E | CLOTH, DUCK, COTTON OR COTTON POLYESTER BLEND, SYNTHETIC RUBBER,IMPREGNATED, LAMINATED, OIL RESISTANT |
MIL S 28786 : B | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
SAE MAM 2410 : 2000 | PLATING, SILVER, NICKEL STRIKE, HIGH BRAKE |
MIL-G-21610 Revision C:1989 | GASKETS, HEAT EXCHANGER, VARIOUS CROSS SECTION RINGS, SYNTHETIC RUBBER |
MIL-DTL-438 Revision C:2010 | WIRE; PRIMER, ELECTRICAL |
MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-A-47284 Revision A:1991 | ADHESIVE, EPOXY RESIN BASE |
MIL-C-17620 Revision F:1990 | Crown, Service Cap (Man\'s) (No S/S Document) |
MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
MIL-I-26299 Revision G:1990 | INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED |
MIL-T-6598 Revision F:1994 | TRANSMITTER, RATE OF FLOW, FUEL, SYNCHRO STYLE TYPE J 6A |
MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
MIL-DTL-6279 Revision M:2003 | PARKA, EXTREME COLD WEATHER, TYPE N-3B |
MIL-V-85603 Base Document:1989 | VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR |
MIL-DTL-28875 Revision C:2012 | Amplifiers, Radio-Frequency and Microwave, Solid-State, General Specification for |
MIL B 1163 : A | BARS, FLINDERS |
MIL T 31000 : 0 | TECHNICAL DATA PACKAGES - GENERAL SPECIFICATION FOR |
MIL-I-24391 Revision C:1990 | INSULATION TAPE, ELECTRICAL, PLASTIC, PRESSURE SENSITIVE |
MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-HDBK-284-1 Base Document:1992 | INTERACTIVE COURSEWARE (ICW) FOR MILITARY TRAINING, MANAGERS GUIDE FOR DEVELOPMENT, ACQUISITION & MANAGEMENT OF |
MIL DTL 46709 : F | HOWITZER, MEDIUM, SELF-PROPELLED: 155-MM, M109A2, M109A3, M109A4, AND M109A5; PROCESSING FOR STORAGE AND SHIPMENT OF |
MIL-L-24942 Revision A:1993 | LINER, FIREMAN'S TROUSER, QUILTED |
MIL L 27546 : D | LINER, FLYER'S, JACKET AND LINER, FLYER'S, TROUSERS, CWU-9/P |
MIL-P-29609 Base Document:1995 | POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC |
SAE AS 81824 : 2016 | SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
MIL-STD-1905 Revision A:1992 | DESIGN AND TEST REQUIREMENTS FOR LEVEL B AND LEVEL C AMMUNITION PACKAGING |
SAE AMS 3679 : 2015 | INSULATION, THERMAL, CERAMIC FIBER |
SAE AMS1547:2008 | CLEANER, ANODIC, ELECTROLYTIC, ALKALINE, FOR STEEL, TANK TYPE |
SAE AS 83519 : 2015 | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
SAE AMS 2444 : 2011 | COATING, TITANIUM NITRIDE, PHYSICAL VAPOR DEPOSITION |
SAE AMS 3661 : 2015 | POLYTETRAFLUOROETHYLENE (PTFE) FILM, PREMIUM GRADE |
SAE AMS 3714 : 2013 | CORE, OVEREXPANDED HONEYCOMB, POLYAMIDE PAPER BASE, PHENOLIC COATED |
SAE AMS R 83248 : 2005 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
SAE AS 83819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
SAE AMS 3529 : 2015 | PLASTIC SHEET AND FILM, VINYL COPOLYMERS, UNPLASTICIZED |
SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
SAE AS 6224 : 2015 | WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
SAE AS 7220A : 2017 | ALUMINUM RIVETS, UNS A91100, 99AL (1100-H14) |
SAE AMS 3892 : 2016 | FIBERS, CARBON, TOW AND YARN, FOR STRUCTURAL COMPOSITES |
SAE AMS 3827 : 2016 | Cloth, Type "E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant |
SAE AMS3617F : 2014 | POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS |
SAE AMS HH G 101 : 2014 | GASKET, METALLIC-ENCASED |
SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
SAE AMS 1541 : 2005 | CLEANER, FUEL DROP TANK, WATER-SOLUBLE |
ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
MIL D 6054 : F | DRUM, METAL - SHIPPING AND STORAGE |
MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
MIL-STD-1660 Revision A:2008 | DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS |
MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
MIL-PRF-6081 Revision E:2014 | LUBRICATING OIL, JET ENGINE |
PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
MIL-C-3774 Revision B:1991 | CRATE, WOOD, OPEN 12,000 AND 16,000 POUND CAPACITY |
MIL-DTL-39028 Revision F:2013 | CAPACITORS, PACKAGING OF |
ASTM D 4169 : 2016 : REDLINE | Standard Practice for Performance Testing of Shipping Containers and Systems |
MIL-DTL-28786 Revision D:2014 | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
MIL-PRF-81705 Revision E:2009 | Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
MIL-DTL-12000 Revision K:2012 | CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF |
MS27684 Revision C:1987 | DRUM, METAL SHIPPING AND STORAGE 3 TO 12 GALLONS |
MIL-PRF-46170 Revision E:2013 | HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
MIL-P-149 Revision D:1984 | PLASTIC COATING COMPOUND, STRIPPABLE [HOT DIPPING] |
MIL-G-81559 Revision C:1984 | Gyroscope Assemblies and Attitude and Directional Reference Instruments for Aircraft, Packaging of |
MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
MIL-STD-758 Revision C:1990 | PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS |
MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
ASTM D 6880 : 2005 | Standard Specification for Wood Boxes |
MIL-PRF-11264 Revision F:2010 | CONTAINER: SHIPPING, REUSABLE-FOR TANK-AUTOMOTIVE ENGINES, TRANSMISSIONS, DIFFERENTIALS, TRANSFERS, FINAL DRIVES, DRIVE AXLES, AND SIMILAR ASSEMBLIES |
A-A-1249 Revision A:1993 | PAPER, WRAPPING, TISSUE |
MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
PPP-C-850 Revision D:1964 | CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES) |
MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
MIL-PRF-3150 Revision E:2008 | LUBRICATING OIL, PRESERVATIVE, MEDIUM |
PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
MIL-C-3993 Revision C:1962 | COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF |
MIL-P-6063 Revision B:1978 | PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR |
MS27683 Revision C:1987 | DRUM, METAL SHIPPING AND STORAGE 16 TO 80 GALLONS |
MIL-C-6529 Revision C:1958 | CORROSION PREVENTIVE, AIRCRAFT ENGINE |
MIL-PRF-46002 Revision D:2010 | PRESERVATIVE OIL, CONTACT AND VOLATILE CORROSION-INHIBITED |
ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
MIL-PRF-3420 Revision H:2008 | WRAPPING MATERIALS, VOLATILE CORROSION INHIBITOR TREATED, OPAQUE |
MIL-P-19644 Revision C:1970 | PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD) |
PPP-T-495 Revision B:1974 | TUBES, MAILING, AND FILING |
MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
MIL-PRF-131 Revision K:2005 | BARRIER MATERIALS, WATERVAPORPROOF, GREASEPROOF, FLEXIBLE, HEAT-SEALABLE |
ASTM D 4279 : 1995 | Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods |
MIL-C-16555 Revision D:1975 | COATING COMPOUND, STRIPPABLE, SPRAYABLE |
MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
MIL-PRF-121 Revision G:2001 | BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE |
A-A-203 Revision C:1996 | PAPER, KRAFT, UNTREATED |
MIL B 46506 : D | BOXES, AMMUNITION PACKING, WOOD, WIREBOUND |
PPP-C-1797 Revision A:1982 | CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM |
MIL-DTL-117 Revision H:2001 | BAGS, HEAT-SEALABLE |
MIL-STD-3010 Revision B:2008 | Test Procedures for Packaging Materials and Containers |
MIL-PRF-23199 Revision E:1997 | PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS |
PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
MIL-DTL-6060 Revision E:2004 | Bags, Watervaporproof, Heat-Sealable, Complex |
MIL-PRF-26514 Revision G:1995 | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
ASTM D 1974 : 1998 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
PPP-B-140 Revision C:1993 | BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF |
MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
MIL-DTL-2427 Revision J:2017 | Box, Ammunition Packing: Wood, Nailed |
MIL-PRF-81322 Revision G:2005 | GREASE, AIRCRAFT, GENERAL PURPOSE, WIDE TEMPERATURE RANGE, NATO CODE G-395 |
PPP-B-676 Revision E:1992 | BOXES SET-UP |
MIL-DTL-75 Revision K:2007 | ELECTRON TUBES, PACKAGING OF |
MS24347 Revision F:1987 | DRUM, METAL-SHIPPING AND STORAGE |
MIL-DTL-17667 Revision E:2005 | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON-CORROSIVE) |
ASTM D 6256/D6256M : 2016 : REDLINE | Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases |
MIL-PRF-8188 Revision D:1997 | CORROSION-PREVENTIVE, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
MIL-PRF-83671 Revision B:1997 | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
A-A-50177 Revision B:2007 | PAPER, LENS |
MIL-PRF-22191 Revision F:2008 | Barrier Materials, Transparent, Flexible, Heat-Sealable |
A-A-1507 Revision A:1993 | CHIPBOARD |
MIL-PRF-21260 Revision E:1998 | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN |
MIL-PRF-7870 Revision E:2015 | LUBRICATING OIL: GENERAL PURPOSE, LOW-TEMPERATURE (NATO O-142) |
MIL-DTL-4 Revision M:1997 | TIRES AND INNER TUBES (NON-AIRCRAFT); PACKAGING OF |
PPP-B-1672 Revision E:2013 | BOXES, SHIPPING, REUSABLE WITH CUSHIONING |
PPP-D-729 Revision E:1977 | DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS) |
MIL-DTL-19491 Revision J:2014 | SEMICONDUCTOR DEVICES, PACKAGING OF |
MIL-DTL-55330 Revision C:2001 | CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
A-A-3174 Base Document:1998 | PLASTIC SHEET, POLYOLEFIN |
MIL-B-43666 Revision D:1986 | BOXES, SHIPPING, CONSOLIDATION |
MIL-C-3131 Revision F:1995 | CORDAGE, PACKING OF |
MIL-PRF-32033 Revision A:2016 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE (WATER-DISPLACING, LOW TEMPERATURE) |
ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
MIL-PRF-6085 Revision E:2011 | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
UU-B-36 Revision J:1970 | BAGS, PAPER (GROCERS) |
MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
MIL-PRF-22019 Revision E:2006 | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
MIL-M-3184 Revision C:1986 | MACHINERY: DECK AND VEHICLE MOUNTED WITH ASSOCIATED EQUIPMENT AND PROVISIONED (REPAIR PARTS) ITEMS: PACKAGING OF |
A-A-3129 Revision C:2014 | CUSHIONING MATERIAL, FLEXIBLE OPEN CELL PLASTIC FILM (FOR PACKAGING APPLICATIONS) |
PPP-C-2020 Revision A:1994 | CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF |
PPP-B-1055 Revision B:1975 | BARRIER MATERIAL, WATERPROOFED FLEXIBLE |
MIL-DTL-81997 Revision D:2004 | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC-PROTECTIVE, TRANSPARENT |
MIL-PRF-10924 Revision H:2008 | GREASE, AUTOMOTIVE AND ARTILLERY |
MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
SAE AS 26860 : 1998 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
QQ-A-1876 Base Document:1974 | ALUMINUM FOIL |
MIL-C-11796 Revision C:1986 | CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
A-A-59135 Base Document:1997 | PACKAGING MATERIAL, SHEET |
ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
MIL-P-130 Revision F:1985 | PAPER WRAPPING, LAMINATED AND CREPED |
DOD 5220.22M : 95 SUP1 CHANGE 1 | INDUSTRIAL SECURITY MANUAL FOR SAFEGUARDING CLASSIFIED INFORMATION |
MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
A-A-1898 Revision D:2012 | CUSHIONING MATERIAL, CELLULOSIC, PACKAGING |
MMM-A-260 Revision C:1984 | ADHESIVE WATER RESISTANT (FOR SEALING WATERPROOFED PAPER) |
A-A-59136 Base Document:1997 | CUSHIONING MATERIAL, PACKAGING, CLOSED CELL FOAM PLANK |
ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
PPP-C-1120 Revision D:2012 | CUSHIONING MATERIAL, UNCOMPRESSED BOUND FIBER FOR PACKAGING |
NAS847:2012 | CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL |
MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
PPP-B-585 Revision D:1992 | BOX, WOOD, WIREBOUND |
MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
MIL-C-104 Revision C:1992 | CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED |
MIL-STD-961 Revision E:2003 | DEFENSE AND PROGRAM-UNIQUE SPECIFICATIONS FORMAT AND CONTENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.