• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

IPC 2221B:2012

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

GENERIC STANDARD ON PRINTED BOARD DESIGN
Available format(s)

Hardcopy

Superseded date

22-01-2024

Language(s)

English

Published date

20-11-2012

1 SCOPE
2 APPLICABLE DOCUMENTS
3 GENERAL REQUIREMENTS
4 MATERIALS
5 MECHANICAL/PHYSICAL PROPERTIES
6 ELECTRICAL PROPERTIES
7 THERMAL MANAGEMENT
8 COMPONENT AND ASSEMBLY ISSUES
9 HOLES/INTERCONNECTIONS
10 GENERAL CIRCUIT FEATURE REQUIREMENTS
11 DOCUMENTATION
12 QUALITY ASSURANCE
APPENDIX A
APPENDIX B
APPENDIX C - Example of a Testability Design Checklist

This standard establishes the generic requirements for the design of organic printed boards and other forms of componentmounting or interconnecting structures, including PC card form factors.

DevelopmentNote
Supersedes MIL STD 2118, IPC D 949 & IPC ML 910. Together with IPC 2222 & IPC 2223 supersedes IPC D 249 & IPC D 275. Also available in CD-ROM format. Included in IPC 2220, IPC C 102, IPC C 106, IPC C 105 & IPC C 1000. (07/2009) A2003 is still active in Chinese Language, See separate record. (11/2012) Also available in German Language, See IPC 2221 GERMAN. (11/2013) Also available in French Language, See IPC 2221 FRENCH. (07/2015)
DocumentType
Revision
ISBN
978-1-61193-069-6
Pages
170
PublisherName
Institute of Printed Circuits
Status
Superseded
SupersededBy
Supersedes

DSCC 11001 : 0 PRINTED WIRING BOARD, FLEXIBLE, TYPE 1 (SINGLE-SIDED ) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER
SAE AIR 6127 : 2017 MANAGING HIGHER VOLTAGES IN AEROSPACE ELECTRICAL SYSTEMS
BS EN 61182-2-2:2012 Printed board assembly products. Manufacturing description data and transfer methodology Sectional requirements for implementation of printed board fabrication data description
MIL-DTL-21097 Revision H:2017 Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
DSCC 11004 : 0 PRINTED WIRING BOARD, RIGID FLEX, TYPE 4 (MULTILAYERED) WITH SUPPORTED HOLES, WITH STIFFENER
I.S. EN 61182-2-2:2012 PRINTED BOARD ASSEMBLY PRODUCTS - MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY - PART 2-2: SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF PRINTED BOARD FABRICATION DATA DESCRIPTION (IEC 61182-2-2:2012 (EQV))
MIL-HDBK-1861 Revision B:2013 Selection and Use1 of Electrical and Electronic Assemblies, Boards, Cards, and Associated Hardware
DSCC 11005 : 0 PRINTED WIRING BOARD, RIGID FLEX, TYPE 5 (MULTILAYER) WITH UNSUPPORTED HOLES, WITH OR WITHOUT STIFFENER
I.S. EN 140402-801:2015 DETAIL SPECIFICATION: FIXED LOW POWER WIREWOUND SURFACE MOUNT (SMD) RESISTORS - RECTANGULAR - STABILITY CLASSES 0,5; 1; 2
IEC PAS 62250:2001 Qualification and performance specification for rigid printed boards (IPC 6012A with Amendment 1)
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors - Rectangular - Stability classes 0,5; 1; 2
EN 61182-2-2:2012 Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description
IPC 2222 GERMAN : A SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
IPC CM 770 : E COMPONENT MOUNTING GUIDELINES FOR PRINTED BOARDS
IPC 2222 FRENCH : A2010 SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
MIL-PRF-50884 Revision F:2014 Printed Wiring Board, Flexible or Rigid-Flex, General Specification for
IPC 4554 CHINESE : - SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS
IPC 2224 : 0 SECTIONAL STANDARD FOR DESIGN OF PWBS FOR PC CARDS
IPC AJ 820 : A ASSEMBLY AND JOINING HANDBOOK
MIL-DTL-29563 Revision B:2014 ANTENNA SYSTEM, AIMS SHIPBOARD, ELECTRONICALLY STEERED OE-120/UPX
IPC 6012 RUSSIAN : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
DEFSTAN 00-970(PT0)/9(2012) : 2012 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 08-107/3(2013) : 2013 GENERAL REQUIREMENTS FOR THE DESIGN OF ELECTROTECHNICAL AND NAVAL WEAPON EQUIPMENT
IPC J STD 001 SWEDISH : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC 4821 : 0 SPECIFICATION FOR EMBEDDED PASSIVE DEVICE CAPACITOR MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS
MIL P 50884 : E PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR
IPC J STD 001 RUSSIAN : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 TURKISH : E2010 REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 POLISH : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
DEFSTAN 00-970(PT0)/17(2016) : 2016 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC 2223 CHINESE : C SECTIONAL DESIGN STANDARD FOR FLEXIBLE PRINTED BOARDS
IPC 2225 : 0 SECTIONAL DESIGN STANDARD FOR ORGANIC MULTICHIP MODULES (MCM-L) AND MCM-L ASSEMBLIES
DEFSTAN 00-970(PT0)/7(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC 6012 POLISH : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
DEFSTAN 00-970(PT0)/14(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-PRF-55110 Revision H:2014 Printed Wiring Board, Rigid, General Specification for
IPC 9241 : 2016 GUIDELINES FOR MICROSECTION PREPARATION
MIL-PRF-31032-2 Revision C:2017 PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE LAYER, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING
IPC 2611 : 0 GENERIC REQUIREMENTS FOR ELECTRONIC PRODUCT DOCUMENTATION
IPC 2612-1 : 0 SECTIONAL REQUIREMENTS FOR ELECTRONIC DIAGRAMMING SYMBOL GENERATION METHODOLOGY
MIL-PRF-31032-1 Revision D:2017 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOSETTING RESIN BASE MATERIAL, WITH OR WITHOUT BLIND AND BURIED PLATED-THROUGH HOLES, FOR SOLDERED PART MOUNTING
IPC 2222 CHINESE : A SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
IPC 2612 : 0 SECTIONAL REQUIREMENTS FOR ELECTRONIC DIAGRAMMING DOCUMENTATION (SCHEMATIC AND LOGIC DESCRIPTIONS)
IPC 2316 : 0 DESIGN GUIDE FOR EMBEDDED PASSIVE DEVICE PRINTED BOARDS
IPC 4553 : A SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS
IPC 2524 : 0 PWB FABRICATION DATA QUALITY RATING SYSTEM
MIL-DTL-7788 Revision H:2011 PANELS, INFORMATION, INTEGRALLY ILLUMINATED
IPC 6010 SERIES : LATEST IPC-6010 QUALIFICATION AND PERFORMANCE SERIES
IPC 4761 : 0 DESIGN GUIDE FOR PROTECTION OF PRINTED BOARD VIA STRUCTURES
IPC 2588 : 2007 SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF PART LIST PRODUCT DATA DESCRIPTION
DEFSTAN 00-970(PT0)/13(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC 2583 : 2007 SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF DESIGN CHARACTERISTICS FOR MANUFACTURING DATA DESCRIPTION
DEFSTAN 00-970(PT0)/11(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-DTL-917 Revision F:2014 ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR
DEFSTAN 00-970(PT0)/15(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
MIL-PRF-31032-4 Revision C:2017 PRINTED WIRING BOARD, RIGID FLEX OR FLEXIBLE, MULTILAYER, WITH PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING
MIL-PRF-31032-6 Revision B:2017 PRINTED WIRING BOARD, RIGID, SINGLE AND DOUBLE SIDED, THERMOPLASTIC RESIN BASE MATERIAL, WITH OR WITHOUT PLATED-THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC 2152 : 0 STANDARD FOR DETERMINING CURRENT CARRYING CAPACITY IN PRINTED BOARD DESIGN
MIL-PRF-31032-3 Revision C:2017 PRINTED WIRING BOARD, FLEXIBLE, SINGLE AND DOUBLE LAYER, WITH OR WITHOUT PLATED-THROUGH HOLES, WITH OR WITHOUT STIFFENERS, FOR SOLDERED PART MOUNTING
IPC SM 840 : E QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS
IPC 2223 GERMAN : C SECTIONAL DESIGN STANDARD FOR FLEXIBLE PRINTED BOARDS
IPC HDBK 830 : A GUIDELINES FOR DESIGN, SELECTION AND APPLICATION OF CONFORMAL COATINGS
MIL-PRF-31032-5 Revision B:2017 PRINTED WIRING BOARD, RIGID, MULTILAYERED, THERMOPLASTIC, THERMOSETTING, OR THERMOPLASTIC AND THERMOSETTING RESIN BASE MATERIAL, WITH PLATED THROUGH HOLES, FOR HIGH FREQUENCY APPLICATIONS
IPC J STD 001 HUNGARIAN : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 GERMAN : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC SM 840 CHINESE : E QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS
IPC 4553 CHINESE : A SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS
IPC 6013 GERMAN : B QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE PRINTED BOARDS
IPC HDBK 840 : 0 SOLDER MASK HANDBOOK
IPC 6012 FRENCH : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS
IPC 2582 : 2007 SECTIONAL REQUIREMENTS FOR IMPLEMENTATION OF ADMINISTRATIVE METHODS FOR MANUFACTURING DATA DESCRIPTION
MIL-PRF-3098 Revision L:2017 CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR
DEFSTAN 00-970(PT0)/8(2011) : 2011 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC PWB-CRT-SG : A2007 PCB DESIGNERS CERTIFICATION STUDY GUIDE
IPC 7351 GERMAN : B Basic requirements for SMT design and SMD patch guideline
IPC 2614 : 0 SECTIONAL REQUIREMENTS FOR BOARD FABRICATION DOCUMENTATION
IPC 4556 : 0 SPECIFICATION FOR ELECTROLESS NICKEL/ELECTROLESS PALLADIUM/IMMERSION GOLD (ENEPIG) PLATING FOR PRINTED CIRCUIT BOARDS
DEFSTAN 00-970(PT0)/10(2013) : 2013 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC J STD 001 ROMANIAN : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
IPC J STD 001 DANISH : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC D 422 : 0 DESIGN GUIDE FOR PRESS FIT RIGID PRINTED BOARD BACK PLANES
IPC 6018 CHINESE : B QUALIFICATION AND PERFORMANCE SPECIFICATION FOR HIGH FREQUENCY (MICROWAVE) PRINTED BOARD
DEFSTAN 00-970(PT0)/16(2015) : 2015 DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
IPC 7095 : C DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR BGAS
I.S. EN 61189-3-719:2016 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3-719: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS) - MONITORING OF SINGLE PLATED-THROUGH HOLE (PTH) RESISTANCE CHANGE DURING TEMPERATURE CYCLING
PD IEC/TS 62647-1:2012 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Preparation for a lead-free control plan
IPC 7351 : B GENERIC REQUIREMENTS FOR SURFACE MOUNT DESIGN AND LAND PATTERN STANDARD
13/30295427 DC : 0 BS IEC/PAS 61249-8-5 ED.1 - QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS
I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
IPC J STD 001 CHINESE : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC 2222 : A SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS
IPC J STD 001 SPANISH : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 FRENCH : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
MIL-DTL-22442 Revision G:2009 CABLE ASSEMBLIES, AIRCRAFT AUDIO, GENERAL SPECIFICATION FOR
IEEE 1725-2011 IEEE Standard for Rechargeable Batteries for Cellular Telephones
MIL-DTL-21097-15 Revision G:2005 CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (NO MOUNTING PROVISION)
GEIA HB 0005-2 : 2007 TECHNICAL GUIDELINES FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES
NASA KSC E 165 : 2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
MIL-DTL-39024 Revision C:2014 JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR
NASA MSFC STD 3425 : 2006 MULTIPROGRAM/PROJECT COMMON-USE DOCUMENT DESIGN STANDARD FOR RIGID PRINTED CIRCUIT BOARDS AND ASSEMBLIES
NASA MSFC STD 2907 : 2006 WORKMANSHIP STANDARD FOR PRINTED WIRING BOARDS
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA KSC STD E 0001 : 2008 DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
GEIA STD 0005-1 : 2012 PERFORMANCE STANDARD FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
CSA N290.14 : 2015 QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS
NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
IPC 4554 : 0 SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS
IEC TS 62647-1:2012 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Preparation for a lead-free control plan
MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
MIL-DTL-21097-14 Revision F:2005 CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING: 0.200, ALTERNATE DUAL ROW, TYPE CS, BLADE CONTACT (MOUNTING PROVISION A)
MIL-DTL-21097-3 Revision F:2005 CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, ADAPTER, CONTACT SPACING (.200) INDIVIDUAL CONTACTS, TYPE CS
DSCC 11002 : 0 PRINTED WIRING BOARD, FLEXIBLE, TYPE 2 (DOUBLE-SIDED) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER
DSCC 11003 : 0 PRINTED WIRING BOARD, FLEXIBLE, TYPE 3 (MULTILAYER) WITH PLATED THROUGH HOLES, WITH OR WITHOUT STIFFENER
IEC PAS 61249-8-5:2014 Qualification and performance specification of permanent solder mask and flexible cover materials
IEC PAS 62647-1:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 1: Lead-free management
IEC 61182-2-2:2012 Printed board assembly products - Manufacturing description data and transfer methodology - Part 2-2: Sectional requirements for implementation of printed board fabrication data description
PD IEC/PAS 62647-1:2011 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Lead-free management
IEC TS 62647-22:2013 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines
IEC PAS 62647-22:2011 Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 22: Technical guidelines
IEC 61189-3-719:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during temperature cycling
IEC PAS 62293:2001 Qualification and performance specification for high density interconnect (HDI) layers or boards (IPC 6016)
IEC PAS 62249:2001 Qualification and performance specification for flexible printed boards
BS EN 140402-801:2015 Detail specification: Fixed low power wirewound surface mount (SMD) resistors. Rectangular. Stability classes 0,5; 1; 2
BS EN 16602-70-12:2016 Space product assurance. Design rules for printed circuit boards
PD IEC/PAS 61249-8-5:2014 Qualification and performance specification of permanent solder mask and flexible cover materials
EN 16602-70-12:2016 Space product assurance - Design rules for printed circuit boards
BS EN 61189-3-719:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards). Monitoring of single plated-through hole (PTH) resistance change during temperature cycling
IPC 1902 : 1998 GRID SYSTEMS FOR PRINTED CIRCUITS
PD IEC/TS 62647-22:2013 Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Technical guidelines
EN 61189-3-719:2016 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during temperature cycling
ASME Y14.24 : 2012 TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
ASME Y14.31 : 2014 UNDIMENSIONED DRAWINGS - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
SAE AIR7374:2024 Aging Mechanisms of Electrical Insulation Materials in a High Energy System

IPC T 50 : M TERMS AND DEFINITIONS FOR INTERCONNECTING AND PACKAGING ELECTRONIC CIRCUITS
IPC SM 780 : 0 COMPONENT PACKAGING AND INTERCONNECTING WITH EMPHASIS ON SURFACE MOUNTING
IPC 4552 : 0 PERFORMANCE SPECIFICATION FOR ELECTROLESS NICKEL/IMMERSION GOLD (ENIG) PLATING FOR PRINTED BOARDS
IPC 6011 : 0 GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS
IPC 4553 : A SPECIFICATION FOR IMMERSION SILVER PLATING FOR PRINTED BOARDS
IPC TR 001 : 1989 AN INTRODUCTION TO TAPE AUTOMATED BONDING FINE PITCH TECHNOLOGY
IPC 4202 : A FLEXIBLE BASE DIELECTRICS FOR USE IN FLEXIBLE PRINTED BOARDS
IPC D 356 : B BARE SUBSTRATE ELECTRICAL TEST DATA FORMAT
IPC 4761 : 0 DESIGN GUIDE FOR PROTECTION OF PRINTED BOARD VIA STRUCTURES
IPC 9252 : A REQUIREMENTS FOR ELECTRICAL TESTING OF UNPOPULATED PRINTED BOARDS
IPC 2611 : 0 GENERIC REQUIREMENTS FOR ELECTRONIC PRODUCT DOCUMENTATION
IPC J STD 001 : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC JP002 : 0 JEDEC/IPC CURRENT TIN WHISKERS THEORY AND MITIGATION PRACTICES GUIDELINE
IPC CC 830 : B QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES
SAE AMS QQ N 290 : 2015 NICKEL PLATING (ELECTRODEPOSITED)
IPC 4203 : A COVER AND BONDING MATERIAL FOR FLEXIBLE PRINTED CIRCUITRY
IPC D 422 : 0 DESIGN GUIDE FOR PRESS FIT RIGID PRINTED BOARD BACK PLANES
IPC 4563 : 0 RESIN COATED COPPER FOIL FOR PRINTED BOARDS GUIDELINE
IPC 2141 : A DESIGN GUIDE FOR HIGH-SPEED CONTROLLED IMPEDANCE CIRCUIT BOARDS
IPC J STD 006 : C REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS
IPC TM 650 : 0 TEST METHODS MANUAL
IPC 2251 : 0 DESIGN GUIDE FOR THE PACKAGING OF HIGH SPEED ELECTRONIC CIRCUITS
IPC 9631 : 0 USER GUIDE FOR IPC-TM-650 - METHOD 2.6.27: THERMAL STRESS, CONVECTION REFLOW ASSEMBLY SIMULATION
IPC CM 770 : E COMPONENT MOUNTING GUIDELINES FOR PRINTED BOARDS
IPC D 322 : 0 GUIDELINES FOR SELECTING PRINTED WIRING BOARD SIZES USING STANDARD PANEL SIZES
IPC 4101 : D SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS
IPC 7351 : B GENERIC REQUIREMENTS FOR SURFACE MOUNT DESIGN AND LAND PATTERN STANDARD
IPC 2615 : 0 PRINTED BOARD DIMENSIONS AND TOLERANCES
IPC J STD 005 : A REQUIREMENTS FOR SOLDERING PASTES
IPC 2511 : B GENERIC REQUIREMENTS FOR IMPLEMENTATION OF PRODUCT MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY
IPC MC 790 : 0 GUIDELINES FOR MULTICHIP MODULE TECHNOLOGY UTILIZATION
ESD S20.20 : 2014 PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
IPC 7094 : 0 DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR FLIP CHIP AND DIE SIZE COMPONENTS
IPC 1601 : 0 PRINTED BOARD HANDLING AND STORAGE GUIDELINES
SAE AMS QQ A 250 B : 2012 ALUMINUM AND ALUMINUM ALLOY, PLATE AND SHEET GENERAL SPECIFICATION FOR
IPC D 279 : 0 DESIGN GUIDELINES FOR RELIABLE SURFACE MOUNT TECHNOLOGY PRINTED BOARD ASSEMBLIES
IPC 7525 : B STENCIL DESIGN GUIDELINES
IPC 9701 : A PERFORMANCE TEST METHODS AND QUALIFICATION REQUIREMENTS FOR SURFACE MOUNT SOLDER ATTACHMENTS
IPC 4204 : A FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY
IPC 4562 : A METAL FOIL FOR PRINTED BOARD APPLICATIONS
IPC HDBK 840 : 0 SOLDER MASK HANDBOOK
IPC J STD 003 : C SOLDERABILITY TESTS FOR PRINTED BOARDS
IPC 4554 : 0 SPECIFICATION FOR IMMERSION TIN PLATING FOR PRINTED CIRCUIT BOARDS
IPC CF 152 : B COMPOSITE METALLIC MATERIAL SPECIFICATION FOR PRINTED WIRING BOARDS
IEEE 1149.1-2013 REDLINE IEEE Standard for Test Access Port and Boundary-Scan Architecture
IPC A 47 : 1996 COMPOSITE TEST PATTERN TEN-LAYER PHOTOTOOL
IPC A 43 : 1995 TEN-LAYER MULTILAYER ARTWORK
IPC 7095 : C DESIGN AND ASSEMBLY PROCESS IMPLEMENTATION FOR BGAS
IPC SM 785 : 0 GUIDELINES FOR ACCELERATED RELIABILITY TESTING OF SURFACE MOUNT ATTACHMENTS
IPC 4103 : A SPECIFICATION FOR BASE MATERIALS FOR HIGH SPEED/HIGH FREQUENCY APPLICATIONS
IPC 2316 : 0 DESIGN GUIDE FOR EMBEDDED PASSIVE DEVICE PRINTED BOARDS
IPC 6012 : C QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS

View more information
$523.00
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more