IPC 4563 : 0

1 SCOPE
  1.1 Classification
       1.1.1 Material Supplier Designator
       1.1.2 C-Stage Resin Layer
       1.1.3 Thickness of the C-Stage Layer
       1.1.4 Resin Type of the C-Stage Layer
       1.1.5 Separator for C- and B-Stage Information
       1.1.6 B-Stage Layer
       1.1.7 Thickness of the B-Stage Layer
       1.1.8 Resin Type of the B-Stage Layer
       1.1.9 Copper Foil Thickness
       1.1.10 Copper Foil Type
       1.1.11 Copper Foil Profile
       1.1.12 Material Property Sheet Description
       1.1.13 Color
2 APPLICABLE DOCUMENTS
  2.1 IPC
  2.2 Underwriters Laboratories
  2.3 National Conference of Standards Laboratories (NCSL)
  2.4 International Standards
3 REQUIREMENTS
  3.1 Terms and Definitions
       3.1.1 Qualification Assessment
       3.1.2 Quality Conformance Testing
       3.1.3 Manufacturer's Quality System
       3.1.4 Process Control Testing
       3.1.5 Self Declaration
       3.1.6 Quality Assessment Data
       3.1.7 Sample Qualification
       3.1.8 Production Data
       3.1.9 User Test Data
       3.1.10 Internal Assessment
       3.1.11 Individual User Audit
       3.1.12 Independent Third Party Assessment
  3.2 Material Property Sheets
  3.3 Manufacturing Supplier's Quality Profile
  3.4 Qualification Testing
  3.5 Verification of Manufacturing Supplier's Quality
       System
  3.6 Conflict
  3.7 Materials
       3.7.1 Metal Cladding
       3.7.2 Resin Systems
  3.8 General Requirements/Acceptability
       3.8.1 Fabricated Panel
       3.8.2 Fabricated Rolls
       3.8.3 Inspection Lot
       3.8.4 Visual Properties
  3.9 Dimensions
       3.9.1 Copper Foil Roll Width
       3.9.2 Roll Coating Width
       3.9.3 Coated Foil Roll Length
       3.9.4 Coated Foil Panel Length and Width
       3.9.5 Panel Coating Width
       3.9.6 Thickness
  3.10 Physical Properties
       3.10.1 Peel Strength After Thermal Stress
       3.10.2 Peel Strength At Elevated Temperature
       3.10.3 Curling
       3.10.4 Coating Thickness
  3.11 Chemical Properties
       3.11.1 Flammability
       3.11.2 Thermal Stress - Un-Etched
       3.11.3 Glass Transition Temperature
       3.11.4 Chemical Resistance
       3.11.5 Low Halogen Content
  3.12 Electrical
       3.12.1 Permittivity
       3.12.2 Loss Tangent
  3.13 Environmental
       3.13.1 Moisture Resistance
  3.14 B-Stage Performance
       3.14.1 Desired Flow
       3.14.2 Desired Volatile Content
       3.14.3 Desired Viscosity
  3.15 Shelf Life
  3.16 Marking
       3.16.1 Marking Panels and Rolls
       3.16.2 Marking of Shipping Containers
  3.17 Workmanship
  3.18 Material Safety
4 QUALITY ASSURANCE PROVISIONS
  4.1 Quality System
  4.2 Responsibility for Inspection
       4.2.1 Test Equipment and Inspection Facilities
  4.3 Qualification Testing
       4.3.1 Samples
       4.3.2 Frequency
       4.3.3 Laminator Qualification Profile
       4.3.4 Changes in Composition
       4.3.5 Qualification Data Retention
  4.4 Quality Conformance Inspection
       4.4.1 Frequency
       4.4.2 Acceptance Criteria
       4.4.3 Rejected Lots
       4.4.4 Conformance Data Retention
       4.4.5 Certificate of Conformance
  4.5 Statistical Process Control (SPC)
5 PREPARATION FOR DELIVERY
  5.1 Packaging Materials
  5.2 Authorized Agents/Distributors
6 NOTES
  6.1 Ordering Data for Coated Copper Foil Materials:
  6.2 New Materials
Example Material Property Sheet