• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ESD S20.20 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
Superseded date

18-12-2021

Published date

12-01-2013

1.0 PURPOSE
  2.0 SCOPE
  3.0 REFERENCED PUBLICATIONS
  4.0 DEFINITIONS
  5.0 PERSONNEL SAFETY
  6.0 ESD CONTROL PROGRAM
       6.1 ESD CONTROL PROGRAM REQUIREMENTS
       6.2 ESD CONTROL PROGRAM MANAGER OR COORDINATOR
       6.3 TAILORING
  7.0 ESD CONTROL PROGRAM ADMINISTRATIVE REQUIREMENTS
       7.1 ESD CONTROL PROGRAM PLAN
       7.2 TRAINING PLAN
       7.3 COMPLIANCE VERIFICATION PLAN
  8.0 ESD CONTROL PROGRAM PLAN TECHNICAL REQUIREMENTS
       8.1 GROUNDING/EQUIPOTENTIAL BONDING SYSTEMS
       8.2 PERSONNEL GROUNDING
       8.3 ESD PROTECTED AREAS (EPAS)
       8.4 PACKAGING
       8.5 MARKING
ANNEX A - ADDITIONAL PROCESS CONSIDERATIONS
ANNEX B - ESD SENSITIVITY TESTING
ANNEX C - RELATED DOCUMENTS

Gives administrative and technical requirements for establishing, implementing, and maintaining an ESD Control Program to protect electrical or electronic parts, assemblies, and equipment susceptible to damage by electrostatic discharges greater than or equal to 100 volts HBM, 200 volts CDM, and 35 volts on isolated conductors.

DevelopmentNote
Supersedes NASA STD 8739.7. (12/2003)
DocumentType
Standard
PublisherName
Electrostatic Discharge Association
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
IPC ESD 20-20 : 1999 Identical

PD IEC/TS 62668-1:2016 Process management for avionics. Counterfeit prevention Avoiding the use of counterfeit, fraudulent and recycled electronic components
PD IEC/TS 62941:2016 Terrestrial photovoltaic (PV) modules. Guidelines for increased confidence in PV module design qualification and type approval
BS EN 16602-20:2014 Space product assurance. Quality assurance
MIL-HDBK-773 Revision A:2005 ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING
MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAE AS 6171/11 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY DESIGN RECOVERY TEST METHODS
SAE AS 6081 : 2012 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - DISTRIBUTORS
SAE AS 12500 : 2018 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
NASA-STD-8739.12:2018 METROLOGY & CALIBRATION
ASTM E 1549/E1549M : 2013 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
IPC AJ 820 : A ASSEMBLY AND JOINING HANDBOOK
IPC J STD 001 SWEDISH : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 DANISH : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC J STD 001 RUSSIAN : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 SPANISH : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC WHMA A 620 HUNGARIAN : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC J STD 001 TURKISH : E2010 REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 POLISH : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 ROMANIAN : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC WHMA A 620 TURKISH : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC 2221 GERMAN : B GENERIC STANDARD ON PRINTED BOARD DESIGN
IPC 1601 GERMAN : - PRINTED BOARD HANDLING AND STORAGE GUIDELINES
IPC WHMA A 620 HEBREW : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC A 610 CZECH : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 GERMAN : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 HINDI : E2010 ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 ESTONIAN : E2010 ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 POLISH : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC WHMA A 620 SPANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 CHINESE : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC A 610 DUTCH : F2014 ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC WHMA A 620 VIETNAMESE : B2012 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC A 610 KOREAN : F2014 ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 ITALIAN : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 FRENCH : F ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC J STD 001 HUNGARIAN : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 SWEDISH : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC J STD 001 GERMAN : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 HUNGARIAN : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC WHMA A 620 POLISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
A-A-58047 Revision D:2016 SIGNAL GENERATOR
IPC A 610 CHINESE : F ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 TURKISH : E2010 ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
MIL STD 11991 : A GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
IPC J STD 001 ROMANIAN : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 JAPANESE : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC J STD 001 DANISH : E REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC A 610 RUSSIAN : D ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC A 610 VIETNAMESE : E ACCEPTABILITY OF ELECTRONIC ASSEMBLIES
IPC WHMA A 620 ESTONIAN : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
IPC WHMA A 620 KOREAN : B2012 AMD 1 2013 REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
NASA HDBK 8739.21 : 2010 WORKMANSHIP MANUAL FOR ELECTROSTATIC DISCHARGE CONTROL (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)
SAE AS 6171/7 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY ELECTRICAL TEST METHODS
SAE AS 6171/8 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY RAMAN SPECTROSCOPY TEST METHODS
A-A-59701-2 Revision A:2006 WRIST STRAP, DUAL CONDUCTOR, METAL, ELECTROSTATIC DISCHARGE WITH OPTIONAL GROUNDING CORD
IEC TS 62941:2016 Terrestrial photovoltaic (PV) modules - Guideline for increased confidence in PV module design qualification and type approval
ARINC 606A : 2004 GUIDANCE FOR ELECTROSTATIC SENSITIVE DEVICE UTILIZATION AND PROTECTION
AAMI TIR18:2010 GUIDANCE ON ELECTROMAGNETIC COMPATIBILITY OF MEDICAL DEVICES IN HEALTHCARE FACILITIES
IPC J STD 001 CHINESE : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 SPANISH : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC J STD 001 FRENCH : F REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES
IPC WHMA A 620 DANISH : B REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES
A-A-59701-1 Revision A:2006 WRIST STRAP, SINGLE CONDUCTOR, METAL, ELECTROSTATIC DISCHARGE WITH OPTIONAL COILED GROUNDING CORD
MIL-STD-464 Revision C:2010 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS
A-A-59701-4 Revision A:2006 WRIST STRAP, DUAL CONDUCTOR, ADJUSTABLE, THERMOPLASTIC, ELECTROSTATIC DISCHARGE
SAE ARP 6178 : 2011 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS - TOOL FOR RISK ASSESSMENT OF DISTRIBUTORS
ASTM E 1549/E1549M : 2013 : R2016 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
NASA MSFC STD 2905 : 2006 MSFC TAILORING GUIDE FOR NASA-STD-8739.4, CRIMPING, INTERCONNECTING CABLES, HARNESS, AND WIRING
ASTM E 1161 : 2009 : R2014 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
NASA MSFC STD 2904 : 2006 MSFC TAILORING GUIDE FOR NASA-STD-8739.2, WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY
NASA STD 8739.3 : 1998 SOLDERED ELECTRICAL CONNECTIONS
NASA MSFC STD 2903 : 2006 MSFC TAILORING GUIDE FOR NASA-STD-8739.3, SOLDERED ELECTRICAL CONNECTIONS
NASA STD 8739.6 : 2016 IMPLEMENTATION REQUIREMENTS FOR NASA WORKMANSHIP STANDARDS
NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA MSFC STD 2906 : 2006 MSFC TAILORING GUIDE FOR NASA-STD-8739.1, WORKMANSHIP STANDARD FOR STAKING AND CONFORMAL COATING OF PRINTED WIRING BOARDS AND ELECTRONIC ASSEMBLIES
NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
NASA KSC STD E 0022 : 2013 BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS
NASA JSC 66552 : 2013 ELECTROSTATIC DISCHARGE CONTROL REQUIREMENTS FOR THE PROTECTION OF ELECTRONIC COMPONENTS AND ASSEMBLIES
NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
NASA JSC 08080-2 : 2015 JSC DESIGN AND PROCEDURAL STANDARDS
NASA MSFC RQMT 2918 : 2015 REQUIREMENTS FOR ELECTROSTATIC DISCHARGE CONTROL
EIA STD 4899 : 2017-05 REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN
NASA MSFC STD 3012 : 2012 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS MANAGEMENT AND CONTROL REQUIREMENTS FOR MSFC SPACE FLIGHT HARDWARE
NASA STD 8739.10 : 2017 ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL (EEE) PARTS ASSURANCE STANDARD
NASA MSFC STD 246 : 2011 STANDARD DESIGN AND OPERATIONAL CRITERIA FOR CONTROLLED ENVIRONMENTAL AREAS
NASA STD 8739.2 : 1999 WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY
NASA JSC 27301 : 2009 MATERIALS AND PROCESSES SELECTION, CONTROL, AND IMPLEMENTATION PLAN FOR JSC FLIGHT HARDWARE
NASA MSFC SPEC 494 : 2009 INSTALLATION OF HARNESS ASSEMBLIES (ELECTRICAL WIRING), SPACE VEHICLE, GENERAL SPECIFICATION FOR
SAE AS 6171/9 : 2016 TECHNIQUES FOR SUSPECT/COUNTERFEIT EEE PARTS DETECTION BY FOURIER TRANSFORM INFRARED SPECTROSCOPY (FTIR) TEST METHODS
A-A-59701-5 Revision A:2006 WRIST STRAP, DISPOSABLE, ELECTROSTATIC DISCHARGE
ESDA/JEDEC JS-002 : 2014 ELECTROSTATIC DISCHARGE SENSITIVITY TESTING - CHARGED DEVICE MODEL (CDM) - COMPONENT LEVEL
MIL-HDBK-522 Revision A:2016 GUIDELINES FOR INSPECTION OF AIRCRAFT ELECTRICAL WIRING INTERCONNECT SYSTEMS
SAE ARP 6328 : 2016 GUIDELINE FOR DEVELOPMENT OF COUNTERFEIT ELECTRONIC PARTS; AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION SYSTEMS
SAE AS 6496 : 2014 FRAUDULENT/COUNTERFEIT ELECTRONIC PARTS: AVOIDANCE, DETECTION, MITIGATION, AND DISPOSITION - AUTHORIZED/FRANCHISED DISTRIBUTION
ANSI/AIHA/ASSP Z9.9-2010 PORTABLE VENTILATION SYSTEMS
I.S. EN 16602-20:2014 SPACE PRODUCT ASSURANCE - QUALITY ASSURANCE
ESD TR17.0-01 : 2015 BEST PRACTICES USED IN INDUSTRY
ESD S541 : 2008 PACKAGING MATERIALS FOR ESD SENSITIVE ITEMS
IEC TS 62668-1:2016 Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
A-A-59701-3 Revision A:2006 WRIST STRAP, SINGLE CONDUCTOR, ADJUSTABLE, THERMOPLASTIC, ELECTROSTATIC DISCHARGE WITH OPTIONAL GROUNDING CORD
SAE AS 6171 : 2016 TEST METHODS STANDARD; GENERAL REQUIREMENTS, SUSPECT/COUNTERFEIT, ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS
ASTM E 1161 : 2009 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
IPC 2221B:2012 GENERIC STANDARD ON PRINTED BOARD DESIGN
IPC 2221 FRENCH : B2012 GENERIC STANDARD ON PRINTED BOARD DESIGN

ESD STM3.1 : 2015 IONIZATION
ESD STM12.1 : 2013 SEATING - RESISTIVE MEASUREMENT
ESD STM2.1 : 2013 GARMENTS
ESD STM97.1 : 2015 FLOOR MATERIALS AND FOOTWEAR - RESISTANCE MEASUREMENT IN COMBINATION WITH A PERSON
ESD ADV1.0 : 2017 GLOSSARY
ESD STM9.1 : 2014 FOOTWEAR - RESISTIVE CHARACTERIZATION
ESD STM4.2 : 2012 ESD PROTECTIVE WORKSURFACES - CHARGE DISSIPATION CHARACTERISTICS
ESD S7.1 : 2013 RESISTIVE CHARACTERIZATION OF MATERIALS - FLOOR MATERIALS
ESD TR53-01 : 2015 COMPLIANCE VERIFICATION OF ESD PROTECTIVE EQUIPMENT AND MATERIALS
ESD S6.1 : 2014 GROUNDING
ESD SP9.2 : 2003 FOOTWEAR - FOOT GROUNDERS RESISTIVE CHARACTERIZATION
ESD S1.1 : 2013 WRIST STRAPS
ESD S4.1 : 2006 WORKSURFACES - RESISTANCE MEASUREMENTS
ESD S541 : 2008 PACKAGING MATERIALS FOR ESD SENSITIVE ITEMS
ESD STM97.2 : 2016 FLOOR MATERIALS AND FOOTWEAR - VOLTAGE MEASUREMENT IN COMBINATION WITH A PERSON
ESD SP3.3 : 2016 PERIODIC VERIFICATION OF AIR IONIZERS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more