BS 903-3:2003
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Physical testing of rubber Acquisition and presentation of comparable single-point data
Hardcopy , PDF
English
04-10-2004
31-08-2008
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Test piece preparation
5 Conditioning
6 Processability properties
7 Test requirements
8 Presentation of results
Table 1 - Test methods for processability data
Table 2 - Test conditions and format for the presentation of
single point data
Table 3 - Test conditions and format for the presentation of
single point data - Additional properties
Describes test procedures for the acquisition and presentation of comparable single-point data for properties of rubber compounds.
| Committee |
PRI/22
|
| DevelopmentNote |
Supersedes 02/123418 DC (07/2003)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ISO 812:2017 | Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
| ISO 1432:2013 | Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test) |
| BS ISO 188:2011 | Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests |
| BS 903-A59.59.1(1997) : 1997 | PHYSICAL TESTING OF RUBBER - METHODS USING PLASTIMETERS - DETERMINATION OF THE RAPID PLASTICITY NUMBER |
| ISO 2921:2011 | Rubber, vulcanized — Determination of low-temperature retraction (TR test) |
| BS 903-A21.21.1(1997) : 1997 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF RUBBER TO METAL BOND STRENGTH - ADHESION TO RIGID SUBSTRATES - 90 DEGREE PEEL METHOD |
| BS 903-A63:1995 | Physical testing of rubber Method for determination of crystallization effects by hardness measurements |
| BS ISO 1817:2015 | Rubber, vulcanized or thermoplastic. Determination of the effect of liquids |
| ISO 813:2016 | Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method |
| BS ISO 4649:2017 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
| BS 903-A50:1984 | Methods of testing vulcanized rubber. Determination of temperature rise and resistance to fatigue in flexometer testing (compression flexometer) |
| BS 2782-2.230A(1982) : 1982 | PHYSICAL TESTING OF RUBBER - DETERMINATION OF VOLUME RESISTIVITY |
| BS ISO 15113:2005 | Rubber. Determination of frictional properties |
| BS 903-A58:1990 | Physical testing of rubber Methods using the Mooney viscometer |
| ISO 8013:2012 | Rubber, vulcanized — Determination of creep in compression or shear |
| BS 903-A14:1992 | Physical testing of rubber Method for determination of modulus in shear or adhesion to rigid plates. Quadruple shear method |
| ISO 1827:2016 | Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
| BS ISO 2285:2013 | Rubber, vulcanized or thermoplastic. Determination of tension set underconstant elongation, and of tension set, elongation and creep underconstant tensile load |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces |
| ISO 4666-3:2016 | Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type) |
| BS ISO 11345:2006 | Rubber. Assessment of carbon black and carbon black/silica dispersion. Rapid comparative methods |
| BS ISO 36:2017 | Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
| BS 903-C2:1982 | Physical testing of rubber Determination of volume resistivity |
| BS ISO 6502:2016 | Rubber. Guide to the use of curemeters |
| BS 903-A64:1995 | Physical testing of rubber Method for the preparation, mixing and vulcanization of rubber test mixes |
| BS EN ISO 6179:2017 | Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing |
| BS 903-A65(1998) : 1998 | RUBBER - ASSESSMENT OF CARBON BLACK DISPERSION - RAPID COMPARATIVE METHODS |
| BS 903-A60.1:2000 | Physical testing of rubber. Curemetering Guide to the use of curemeters |
| BS 903-A62:1993 | Physical testing of rubber Method for determination of green strength of raw rubber of unvulcanized compounds |
| ISO 2782:2006 | Rubber, vulcanized or thermoplastic — Determination of permeability to gases |
| BS 903-A25:1992 | Physical testing of rubber Determination of low-temperature brittleness |
| BS 903-A18:1973 | Physical testing of rubber Determination of equilibrium water vapour absorption |
| ISO 2007:2007 | Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method |
| BS ISO 2230:2002 | Rubber products. Guidelines for storage |
| ISO 2393:2014 | Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures |
| ISO 7743:2017 | Rubber, vulcanized or thermoplastic — Determination of compression stress-strain properties |
| ISO 3387:2012 | Rubber — Determination of crystallization effects by hardness measurements |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| ISO 471:1995 | Rubber — Temperatures, humidities and times for conditioning and testing |
| ISO 9026:2007 | Raw rubber or unvulcanized compounds — Determination of green strength |
| ISO 1853:2011 | Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| BS ISO 3384:2005 | Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures |
| BS ISO 3865:2005 | Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |
| ISO 2781:2008 | Rubber, vulcanized or thermoplastic — Determination of density |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.