Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL C 22750 : F

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

COATING, EPOXY, VOC-COMPLIANT
Available format(s)

PDF

Superseded date

31-05-1994

Language(s)

English

Gives various colors of an epoxy-polyamide coating suitable for use under air pollution regulations. Covers the requirements for a two component, high solids epoxy coating with a maximum volatile organic compound (VOC) content of 340 grams/liter. Does not limit the suppliable colors, nor does it list all available colors. Coverage includes material, toxicity, composition, pigments, condition in container, storage capability, fineness of grind, corse particles,viscosity, pot life, drying time, surface appearance, and gloss.

Committee
FSC 8010
DocumentType
Standard
Pages
24
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy
Supersedes

MIL A 85670 : 0 ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS -3793/A
MIL S 10215 : H SPEEDOMETER, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES,FLEXIBLE SHAFT ASSEMBLY CORES, ADAPTERS AND TRANSMITTERS
MIL P 51529 : 0 PACKAGING OF DECONTAMINATING AGENT
MIL STD 001303 : C PAINTING OF NAVAL ORDNANCE EQUIPMENT
MIL C 53072 : B CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION
MIL-HDBK-11991 Base Document:1996 DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS
MIL-STD-193 Revision L:1991 PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS
MIL P 85582 : B PRIMER COATINGS: EPOXY, WATERBORNE
MIL W 18723 : D WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE
MIL-C-22751 Revision D:1971 COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF
MIL F 18264 : D FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF
MIL D 12468 : C NOTICE 1 DECONTAMINATING AGENT, STB
MIL C 7907 : A CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES]
MIL-C-87936 Revision A:1985 CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE
GG-S-161 Revision D:1985 SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION)
MIL-A-49273 Base Document:1988 AMPLIFIER, POWER SUPPLY AM-7152/GRC-213 & ADAPTER KIT, VEHICLE MK-2154/GRC-213
MIL-STD-1516 Revision B:1990 UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
MIL-T-704 Revision K:1992 TREATMENT AND PAINTING OF MATERIAL
MIL-F-7179 Revision G:1993 FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM
SAE AS 6882 : 1999 WATER REPELLENT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC
DOD-B-24504 Revision B:1978 BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC)
MIL-STD-1303 Revision B:1975 PAINTING OF NAVAL ORDNANCE EQUIPMENT
MIL L 45068 : D LIGHT, DOME,VEHICULAR, 24 VOLT DIRECT CURRENT
MIL-R-7705 Revision B:1975 RADOME, GENERAL SPECIFICATION FOR
MIL S 55041 : C SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR
SAE AMS 1375 : 2012 REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS
SAE AMS 1377 : 2012 REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT
NASA MSFC SPEC 250 : 1963 PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR
MIL-L-52325 Revision D:1988 LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS
MIL-F-51532 Base Document:1987 FLUID CONTAINER ASSEMBLY, TRAINING
MIL C 85704 : B CLEANING COMPOUND, TURBINE ENGINE GAS PATH
MIL P 23971 : B POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL C 6799 : J COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION
MIL-C-22542 Revision B:1987 CLEANING COMPOUND, HIGH PRESSURE CLEANER, LIQUID
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
MIL C 87937 : B CLEANING COMPOUND, AEROSPACE EQUIPMENT
DOD-B-24505 Revision C:1980 BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC)
SAE AMS T 23397 : 1998 TAPES, PRESSURE SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS
MIL-R-81294 Revision D:1990 REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS
MIL L 81352 : A LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS)
MIL-P-6884 Revision F:1973 PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE
MIL-A-29505 Base Document:1966 ANTENNA GROUP, TACAN, OE-273(V)/URN
MIL-R-81835 Base Document:1971 REMOVER, ORGANIC COATING, HOT TANK TYPE
MIL-W-6882 Revision F:1977 WATER REPELLENT KIT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC
MIL-T-23397 Revision B:1970 TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS
MIL F 14072 : D FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
SAE AMS R 81835 : 2008 REMOVER, ORGANIC COATING, HOT TANK TYPE

MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
MIL-C-22751 Revision D:1971 COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF
TT-P-320 Revision D:1977 PIGMENT, ALUMINUM, POWDER AND PASTE, FOR PAINT
MIL P 23377 : G PRIMER COATING, EPOXY, HIGH SOLIDS
ASTM D 2244 : 2016 : REDLINE Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 562 : 2010 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
MIL C 5541 : E CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
MIL T 81772 : B THINNER, AIRCRAFT COATING
QQ-A-250-5 Revision F:1971 ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET
FED-STD-141 Revision D:2001 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
ASTM D 522 : 1993 : REV A Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
PPP-P-1892 Base Document:1974 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF

View more information
$32.74
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more