Customer Support: 131 242

  • There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL C 5541 : E

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
Available format(s)

PDF

Superseded date

11-07-2006

Language(s)

English

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES

Outlines requirements for two classes of chemical conversion coatings made by the reaction of chemical conversion materials and the surfaces of aluminum and its alloys to provide maximum corrosion resistance on military weapon systems. Coverage includes classification, applicable documents, cleaning, appearance, corrosion resistance properties, paint adhesion properties, workmanship, solution analysis records, and visual lot examination.

Committee
AREA MFFP
DevelopmentNote
Supersedes SAE AMS C 5541 (10/2003)
DocumentType
Standard
Pages
11
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
SAE AMS 2473 : 2013 Similar to
SAE AMS C 5541 : 2000 Similar to
SAE AMS2474 : 2013 Similar to

MIL-C-83982 Base Document:1974 COMPOUND, SEALING, FLUID RESISTANT
MIL P 21698 : A PAINT, FLUORESCENT, FOR AIRCRAFT, PROCESS FOR APPLICATION OF
MIL-STD-2110 Base Document:1979 RESTORATION, OVERHAUL, AND REPAIR OF ELECTRONIC EQUIPMENT
MIL-S-50218 Revision B:1978 SWITCH, NOSE CRUSH ASSEMBLY, ASSEMBLING AND PACKING (DRAGON)
MIL-G-23081 Revision C:1972 GYROSCOPE INDICATOR SYSTEM VERTICAL.
SAE AS 8568 : 2012 BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD))
MIL-C-81945 Revision B:1989 COATING COMPOUND, WEAPON INSULATION, INTUMESCENT
MIL-I-85889 Base Document:1988 IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
NASM20470:2013 RIVET, SOLID, UNIVERSAL HEAD, ALUMINIUM ALLOY AND TITANIUM COLUMBIUM ALLOY
SAE AMS 3116 A : 2005 PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE
MIL C 38240 : C COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY
MIL-I-8580 Revision B:1965 INDICATOR, TACHOMETER, HELICOPTER, 0-4000 RPM TYPE MA 1
MIL I 24728 : A INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR
MIL-S-23665 Revision B:1968 SONOBUOY, DETECTION DEVICES, PRESERVATION, PACKAGING AND PACKING, PROCEDURES FOR
DOD-S-87956 Base Document:1979 SHELTER, S-80A AND S-82A
MIL-A-38307 Revision A:1981 ACCELEROMETER, AIRCRAFT, MX-6663/AJB-7
MIL-F-63428 Base Document:1981 FEED ASSEMBLY, AMMO FOR ARMAMENT SUBSYSTEM, HELICOPTER, 20MM, M97E1 AND M97E2
MIL-P-81655 Base Document:1970 PITOT STATIC TUBE, L-SHAPED, COMPENSATED, ELECTRICALLY HEATED, GENERAL SPECIFICATION FOR
MIL-E-16400 Revision H:1987 ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR
FF-R-556 Revision D:1981 RIVET, SOLID, SMALL, RIVET, SPLIT, SMALL, RIVET TUBULAR SMALL, FLAT WASHER (BURR) AND CAP RIVET, GENERAL PURPOSE
MIL T 5578 : C TANK, FUEL, AIRCRAFT, SELF-SEALING
MIL S 24317 : 0 SWITCH, MULTI-STATION, PUSHBUTTON (ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR
MIL-A-83577 Revision B:1988 ASSEMBLIES, MOVING MECHANICAL, FOR SPACE AND LAUNCH VEHICLES, GENERAL SPECIFICATION FOR
MIL-A-24741 Base Document:1990 ASSEMBLIES, METAL ELECTRICAL BACKPLANE, ONE AND TWO LAYER, GENERAL SPECIFICATION FOR
MIL-I-7062 Revision C:1975 INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR
TT-P-664 Revision D:1988 PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT
MIL-DTL-39030-14 Revision B:2003 DUMMY LOAD, ELECTRICAL, TYPE 14 (BIFURCATED CONTACT), STRIPLINE, LOW POWER
MIL C 53072 : B CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION
MIL-G-24659 Revision A:1993 GAGE, DIFFERENTIAL, DIAL INDICATING
MIL T 6396 : E TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING
TT-P-2760 Revision A:1994 PRIMER COATING; POLYURETHANE, ELASTOMERIC
MIL T 27252 : A TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS
MIL-P-26292 Revision C:1969 PITOT AND STATIC PRESSURE SYSTEMS, INSTALLATION AND INSPECTION OF
MIL-T-83460 Base Document:1975 TRANSDUCER, MOTIONAL PICKUP TRU-164/A
MIL I 7627 : F INDICATOR, TURN AND SLIP 28V DC
MIL-I-83152 Revision B:1974 INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER)
MIL M 28837 : 0 MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR
MIL I 27197 : C INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED
MIL-S-29574 Base Document:1989 SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE
MIL-A-5885 Revision D:1987 ACCELEROMETER, AIRCRAFT
SAE ARP 1481 : 2004 CORROSION CONTROL AND ELECTRICAL CONDUCTIVITY IN ENCLOSURE DESIGN
MIL D 83320 : 0 DETECTOR, MAGNETIC AZIMUTH DSU-14/A
MIL C 38214 : B COMPASS, MAGNETIC,MOUNTED
MIL-I-983 Revision E:1966 INTERIOR COMMUNICATION EQUIPMENT, NAVAL SHIPBOARD, BASIC DESIGN REQUIREMENTS FOR
MIL-P-9388 Revision B:1986 PUMP, PRESSURE, OIL FREE AIR TYPE MA-2
MIL-I-85071 Revision A:1992 INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR
MIL-HDBK-11991 Base Document:1996 DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS
MIL-C-27298 Revision B:1980 CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A
MIL-C-8605 Revision B:1990 CAP, PRESSURE FUEL SERVICING
MIL-L-46159 Revision A:1976 LACQUER, ACRYLIC, LOW REFLECTIVE, OLIVE DRAB
MIL-A-83377 Revision B:1978 ADHESIVE BONDING (STRUCTURAL) FOR AEROSPACE AND OTHER SYSTEMS, REQUIREMENTS FOR
MIL-C-28794 Base Document:1973 Cabinet, Electronic Equipment (Single Bay) (No S/S Document)
MIL-STD-193 Revision L:1991 PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS
MIL-G-25597 Revision D:1973 GYROSCOPE, DISPLACEMENT, ROLL AND PITCH, TYPE MD-1
MIL-L-50794 Base Document:1973 LINEAR SHAPED CHARGE ASSEMBLY
MIL P 85582 : B PRIMER COATINGS: EPOXY, WATERBORNE
MIL-I-29589 Base Document:1991 INTERROGATOR SET, AN/UPX-24(V)
MIL-B-8568 Revision B:1967 BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG]
MIL S 25879 : C SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A
MIL-A-23595 Revision D:1995 AMPLIFIER, AUDIO FREQUENCY
MIL-T-27305 Revision C:1987 TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ
MIL S 9395 : F SWITCHES, PRESSURE, [ABSOLUTE, GAGE AND DIFFERENTIAL] GENERAL SPECIFICATION FOR
MIL-T-85350 Revision B:1990 TRANSMITTER, BEACON, LOCATOR T-1438/D
MIL P 53030 : A PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE
MIL-C-7135 Revision F:1967 Compressor, Pneumatic, 3,000 PSI -- 2 SCFM Aero 2A (*), Aero 2A-1 (*), Aero 2B (*), and Aero 2B-1 (*)
MIL-I-81186 Base Document:1966 INDICATOR, RATE OF FUEL FLOW SYNCHRO TYPE, M590360
MIL-M-7255 Revision B:1969 MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1
MIL-F-22735 Revision C:1980 FILM, ELASTOMERIC, FLUORESCENT, FOR WEAPONS SYSTEMS
MIL B 5806 : F BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE
MIL-I-21206 Revision B:1960 INDICATOR, RATE OF FLOW, FUEL; EFU-7/A (300-5000-15000 PPH)
MIL-DTL-50872 Revision D Interim Revision:2004 CARTRIDGE, 40 MM: HEDP, M433
MIL-I-27709 Revision A:1962 INDICATOR, ATTITUDE ARU-14/A, REMOTE
MIL-E-17341 Revision C:1970 ENGINE, GAS TURBINE, PROPULSION & AUXILIARY NAVAL SHIPBOARD
MS27741 Revision A:2004 CONNECTOR, ELECTRICAL, INDIVIDUAL SHIELD TERMINATION
MIL S 81733 : C SEALING AND COATING COMPOUND CORROSION INHIBITIVE
MIL-S-12158 Revision D:1988 SEALING COMPOUND, NONCURING, POLYBUTANE
MIL-S-85312 Base Document:1979 SEALING COMPOUND, NONCURING, POLYSULFIDE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS
MIL-A-55503 Base Document:1966 ATTITUDE HEADING REFERENCE SET AN/ASN-76
MIL-A-38267 Revision A:1971 APPLICATION OF POLYURETHANE FUEL TANK COATINGS
MIL-I-27196 Revision C:1988 INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED
MIL R 007885 : C SUPP 1 RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR
MIL-A-43671 Base Document:1969 ADAPTOR, REVERSIBLE, QUICK-FIT, 1-3/4 INCH
MIL-L-81293 Revision A:1992 LIGHTWEIGHT SANDWICH CONSTRUCTED PANEL (ASROC) LAUNCHER MK 112
DOD-E-83578 Revision A:1987 EXPLOSIVE ORDNANCE FOR SPACE VEHICLES, GENERAL SPECIFICATION FOR (METRIC)
MIL F 50869 : E FUZE, PIBD M550 LESS SPITBACK ASSEMBLY METAL PARTS & LOADING ASSEMBLING AND PACKING
MIL-C-7438 Revision G:1985 CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION
MIL-DTL-63092 Revision B Interim Revision:2004 Cartridges, 40 Millimeter, Parachutes, Loading, Assembling, and Packing
MIL-C-23367 Base Document:1963 COMPUTER, FLIGHT DIRECTOR, AIRCRAFT
MIL-DTL-25949 Revision F:1995 ACCELEROMETER, AIRCRAFT RANGE -5 TO 10G UNITS, INTEGRALLY LIGHTED
PREN 6120 : 200P1 AEROSPACE SERIES - PINS, CLOSE TOLERANCE, SWAGE LOCKING, PROTRUDING HEAD, SHEAR TYPE, IN ALUMINIUM ALLOY 7050, CHEMICAL FILM - INCH SERIES
PREN 6050 : 200P3 AEROSPACE SERIES - PINS, CLOSE TOLERANCE, SWAGE LOCKING, 100 DEGREES COUNTERSUNK REDUCED HEAD, SHEAR TYPE, IN ALUMINIUM ALLOY 7050, CHEMICAL FILM - INCH SERIES
I.S. EN 6080:2016 AEROSPACE SERIES - RIVET, 100 DEGREES NORMAL FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
MIL-A-23121 Revision C:1970 AIRCREW ENVIRONMENTAL, ESCAPE AND SURVIVAL COCKPIT CAPSULE SYSTEM, GENERAL SPECIFICATION FOR
MIL-DTL-7885-16 Base Document:1996 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, NICKEL-COPPER ALLOY SLEEVE (ALUM COAT), MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4)
MIL-P-23460 Revision E:1991 PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING
MIL-DTL-7885-12 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE
MIL-DTL-7885-14 Base Document:1996 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 1)
MIL-DTL-7885-11 Base Document:1996 RIVETS, BLIND, STRUCTURAL, UNIVERSAL PROTRUDING HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE (TYPE I, STYLE A, CLASS 1)
MS17988 Revision E:1994 PIN QUICK RELEASE POSITIVE LOCKING DOUBLE ACTING T HANDLE
MIL-DTL-7885-28 Base Document:1996 RIVETS, BLIND, STRUCTURAL, FLANGED DOME HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 4)
MIL-DTL-7885-15 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG.FLUSH HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE, OVERSIZE DIAMETER (TYPE I, STYLE B, CLASS 2)
MS17987 Revision G:1994 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, RING HANDLE
MIL-PRF-25134 Revision C:1996 REMOVER, PAINT AND LACQUER, SOLVENT TYPE
MIL-F-22978 Revision A:1963 FASTENER, ROTARY, QUICK-OPERATING, HIGH STRENGTH (ASG)
MIL-A-81973 Base Document:1974 AIRCREW AUTOMATED ESCAPE SYSTEMS, TEST VEHICLES FOR GROUND TRACK PERFORMANCE TESTING, ROCKET AND/OR JET ENGINE PROPELLED; GENERAL SPECIFICATION FOR
MIL S 22885 : E SWITCH, PUSH BUTTON, ILLUMINATED, GENERAL SPECIFICATION FOR
MIL-DTL-7885-27 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED 8740 ALLOY STEEL SPINDLE (TYPE I, STYLE A, CLASS 3)
MIL-T-53101 Base Document:1990 TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE
MIL-H-8775 Revision D:1976 HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR
MIL T 28800 : E TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR
MIL-DTL-7885-13 Base Document:1996 RIVETS, BLIND, STRUCTURAL, 100 DEG. FLUSH SHEAR HEAD, 5056 AL ALLOY SLEEVE, MECHANICALLY LOCKED CRES SPINDLE
MIL-C-5501 Revision G:1989 CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL
MIL-DTL-25027 Revision H:1997 NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F
MIL-W-45595 Revision D:1985 WASHER, RECESSED, SADDLE AND SHOULDERED METAL
MIL-N-8984 Base Document:1972 NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F
MS17984 Revision F:1994 PIN QUICK RELEASE, SELF RETAINING POSITIVE LOCKING SINGLE ACTING BUTTON HANDLE
MS20604 Revision K:1995 RIVET, BLIND, NONSTRUCTURAL, UNIVERSAL HEAD, CLASS 1
MIL-N-8985 Base Document:1972 NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F
MIL-G-81559 Revision C:1984 GYROSCOPE ASSEMBLIES ATTITUDE - DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT PACKAGING OF
MS17986 Revision G:1994 PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, "L" HANDLE
MIL-R-27384 Revision B:1970 RIVET, BLIND, DRIVE TYPE
MIL V 5523 : D VALVE, RELIEF, HYDRAULIC PRESSURE
MIL-E-20652 Revision F:1986 EYELETS, METALLIC, AND EYELET WASHERS, METALLIC, GENERAL SPECIFICATION FOR
MIL-R-5674 Revision F:1994 RIVETS, STRUCTURAL, ALUMINIUM ALLOY, TITANIUM COLUMBIUM ALLOY GENERAL SPECIFICATION FOR
MIL-D-23615 Revision C:1993 DESIGN AND EVALUATION OF CARTRIDGE ACTUATED DEVICES
MIL-DTL-6162 Revision C:2000 GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR
MIL-R-85880 Base Document:1988 ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR
MIL A 7291 : A ANTENNA AT-191B/AP
MIL-S-8802 Revision F:1990 SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION
MIL-S-26547 Revision C:1985 STARTER-GENERATOR ENGINE STU-6A
MIL-M-9397 Revision E:1979 FREQUENCY CONVERTER, MOBILE, TYPE MC-1A
MIL-C-48286 Revision A:1975 CARTRIDGE, MINE EJECTION ASSEMBLY. M198
DEFSTAN 00-77(PT1)/1(2005) : INTERIM ASAAC STANDARDS - PART 1: PROPOSED STANDARDS FOR PACKAGING
MIL-G-19053 Revision C:1957 GAGE - AIRCRAFT, CAPACITANCE, LIQUID OXYGEN CONVERTER, GENERAL SPECIFICATION FOR
MIL-R-85111 Revision A:1980 RECOVERY ASSIST SECURING AND TRAVERSING SYSTEM FOR LAMPS MK 111 HELICOPTER
MIL-M-8609 Revision B:1965 MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR
TT-E-527 Revision D:1988 ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT
MIL-E-4158 Revision E:1973 ELECTRONIC EQUIPMENT, GROUND GENERAL REQUIREMENTS FOR
MIL R 23016 : A RADIO SET AN/ARC-94
MIL P 53022 : B PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE
MIL A 28875 : 0 AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR
MIL-STD-2156 Base Document:1983 LAUNCHER, RAIL, GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL-P-85658 Base Document:1986 PAINT, WATER DISPLACING
MIL F 83870 : A FILTER ELEMENT, FLUID PRESSURE, TRANSMISSION, AIRCRAFT DISPOSABLE, 20 MICRON ABSOLUTE
SAE AS 5604 : 2012 COMPASS: MAGNETIC, PILOT'S STANDBY
MIL C 7907 : A CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES]
MIL-E-52929 Base Document:1977 ENAMEL, ALKYD, CAMOUFLAGE, FLASH DRY
MIL-HDBK-509 Base Document:1998 CLEANING AND TREATMENT OF ALUMINUM PARTS PRIOR TO PAINTING
MIL-T-62032 Revision H:1991 TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL
MIL-DTL-62006 Revision C:1998 COOLER, OIL: TRANSMISSION AND ENGINE
MIL-T-52983 Revision G:1994 TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL
MIL-C-83124 Base Document:1969 CARTRIDGE ACTUATED DEVICES PROPELLANT ACTUATED DEVICES GENERAL DESIGN SPECIFICATION FOR
MIL-E-50796 Base Document:1973 EXPANDING SHIELDED MILD DETONATING CORD ASSEMBLY
MIL-STD-1250 Revision A:1992 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MIL-S-7124 Revision B:1966 SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES
MIL-A-24233 Revision B:1989 ANTENNA, AS-1735( )/SRC
MIL-D-83029 Revision A:1968 DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR
MIL R 83178 : A REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR
MIL-P-5994 Revision D:1972 PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR
MIL P 52995 : 0 PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE
MIL I 18997/2 : 0 INDICATOR, PRESSURE, BOURDON TUBE CIRCULAR DIAL, OXYGEN SERVICE, BLEEDER TIP (3-1/2 AND 4-1/2 INCH SIZES)
MIL G 26611 : D GENERATOR, TACHOMETER GEU-7/A, MINIATURE
MIL-G-23337 Base Document:1962 GAGE - PRESSURE, DIAL INDICATING
MIL-A-27195 Revision A:1989 ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A
MIL-R-81553 Revision B:1992 REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P
MIL L 3890 : A LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL AIR DIELECTRIC]
MIL-M-63508 Base Document:1982 MINE, METAL PARTS FOR MINES: BLU-91/B AND BLU-92/B
MIL-C-82594 Base Document:1971 CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS
MIL L 3976 : D LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT)
MIL-I-5133 Revision C:1953 INDICATOR, ATTITUDE TYPE J 8
MIL-DTL-39030-16 Revision B:2003 DUMMY LOAD, ELECTRICAL, TYPE 14 (BIFURCATED CONTACT), STRIPLINE, LOW POWER
MIL-C-5604 Revision B:1962 COMPASS, MAGNETIC, PILOTS STANDBY
MIL I 18997/1 : 0 INDICATOR, PRESSURE, CIRCULAR DIAL (3-112 4-1/2 AND 8-1/2 INCH DIAL SIZES)
MIL-C-8603 Revision B:1984 CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT
MIL-H-87111 Revision A:1984 HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR
MIL-HDBK-1250 Revision A:1995 CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES
MIL-STD-1516 Revision B:1990 UNIFIED CODE FOR COATINGS AND FINISHES FOR DOD MATERIAL
MIL-STD-2198 Base Document:1990 DESIGN REQUIREMENTS FOR METAL ELECTRICAL BACKPLANE ASSEMBLIES
MIL-F-24666 Base Document:1986 FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY
MIL P 53084 : 0 PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT
TT-P-2756 Revision A:1996 POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT
TT-E-489 Revision J:1994 ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES)
MIL-STD-2131 Revision A:1991 LAUNCHER, EJECTION GUIDED MISSILE, AIRCRAFT, GENERAL DESIGN CRITERIA FOR
MIL L 58085 : A LIGHT, BEACON, ANTI COLLISION AIRCRAFT
MIL-T-704 Revision K:1992 TREATMENT AND PAINTING OF MATERIAL
MIL-H-8890 Base Document:1961 HYDRAULIC COMPONENTS, TYPE 111 [65 DEGREES TO PLUS 450 DEGREES F] GENERAL SPECIFICATION FOR [ASG]
MIL-P-8564 Revision D:1970 PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG]
PREN 6100 : 200P2 AEROSPACE SERIES - PINS, CLOSE TOLERANCE, SWAGE LOCKING, 100 DEGREES COUNTERSUNK HEAD, SHEAR TYPE, IN ALUMINIUM ALLOY 7050, CHEMICAL FILM - INCH SERIES
MIL R 46963 : A ROCKET MOTOR, M42A1, BOOSTER
MIL-C-83019 Base Document:1968 COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND
MIL-C-4150 Revision J:1989 CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF
MIL-F-7179 Revision G:1993 FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM
MIL-A-63576 Revision A:1985 ALUMINUM OXIDE COATINGS, LUBRICATIVE, FOR ALUMINUM AND ALUMINUM ALLOYS
MIL-DTL-85110 Revision B:1997 BAR, REPEATABLE RELEASE HOLDBACK (RRHB), AIRCRAFT LAUNCHING, GENERAL REQUIREMENT FOR
PREN 6051 : 200P3 AEROSPACE SERIES - COLLARS, SWAGE LOCKING, SHEAR TYPE, IN ALUMINIUM ALLOY 3003, CHEMICAL FILM - INCH SERIES
PREN 6054 : 200P3 AEROSPACE SERIES - COLLARS, SWAGE LOCKING, SHEAR TYPE, IN ALUMINIUM ALLOY 6061, CHEMICAL FILM - INCH SERIES
I.S. EN 4660-004:2011 AEROSPACE SERIES - MODULAR AND OPEN AVIONICS ARCHITECTURES - PART 004: PACKAGING
SAE AMS 3603 : 2002 PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS
SAE AS 1297 : 2008(S2014) REDUCERS, PNEUMATIC PRESSURE, MISSILE
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
MIL-A-43820 Revision B:1981 AIR LOCK, (MUST)
MIL S 5002 : D SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
MIL-I-6447 Revision C:1974 INDICATOR, TRUE AIRSPEED TYPE M 1A
MIL S 28827 : A SWITCH, THERMOSTATIC, (VOLATILE LIQUID) HERMETICALLY SEALED GENERAL SPECIFICATION FOR
MIL-C-22751 Revision D:1971 COATING SYSTEM, EPOXY-POLYAMIDE, CHEMICAL AND SOLVENT RESISTANT, PROCESS FOR APPLICATION OF
MIL-A-23622 Base Document:1963 ACTUATOR, AIRCRAFT, ELECTRO-MECHANICAL, LINEAR, DIRECT CURRENT
MIL-T-25193 Revision B:1961 TRANSMITTER, REMOTE COMPASS, TYPE C-2 (UNSTABILIZED)
MIL-I-5418 Revision B:1963 INDICATOR: AIRSPEED, PITOT STATIC, SENSITIVE, 50-650 KNOTS
SAE AIR 1664 : 2013 AIRCRAFT FLEXIBLE TANKS GENERAL DESIGN AND INSTALLATION RECOMMENDATIONS
MIL-C-27725 Revision B:1969 COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS
MIL-M-7997 Revision C:1981 MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR
MIL-C-83873 Revision A:1993 CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE)
TT-R-248 Revision B:1981 REMOVER, PAINT AND LACQUER, SOLVENT TYPE
MIL-W-14993 Revision B:1975 WARHEAD SECTION, GUIDED MISSILE, PRACTICE, M231
MIL-T-60916 Revision C:1991 TUBE, MOTOR, INTEGRAL BULKHEAD FOR ROCKET MOTOR 2.75 INCH, MARK 4 AND MARK 40
MIL-L-3851 Revision E:1991 LOOP, SLIDE [FOR EQUIPAGE]
SAE AMS 1377 : 2012 REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT
MIL F 18264 : D FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF
MIL-I-83751 Base Document:1967 INDICATOR, SAFETY LEVEL, RF
MIL-S-40626 Revision D:1994 SIGN KIT, VEHICLE CLASS
NASM 23460 : 2004 PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING
MIL-B-26793 Revision B:1958 BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1
MIL-A-26107 Revision D:1960 AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3
MIL-A-38331 Base Document:1964 AMPLIFIER-POWER SUPPLY AM-4080/ASN-55, LEVELLING
MIL-A-28865 Revision A:1987 ANTENNA GROUP, OE-82()/WSC-1(V)
MIL-I-21203 Revision A:1962 INDICATOR, ATTITUDE, SPHERICAL, DIRECT READING, FAST ERECTING, ELECTRIC GYRO
MIL-A-19940 Base Document:1957 AMPLIFIER, CONTROL SINGLE CHANNEL, S-2 COMPASS
MIL-G-22169 Base Document:1959 GYRO, VERTICAL AND MOUNT
MIL-C-18053 Revision A:1958 CONTROL AMPLIFIER, ALTITUDE (P-1 AUTOMATIC PILOT RADAR SET, AN/APN-22)
MIL-A-62473 Revision B:1992 ARMOR, ALUMINUM-ARAMID, LAMINATE COMPOSITE
MIL L 13629 : C NOTICE 1 LACQUER, AIR DRYING FOR CRIMPED PARTS
MIL-H-9890 Revision E:1988 HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS
MIL-R-19750 Revision A:1958 REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR
MIL C 63092 : A CARTRIDGES, 40MM, WHITE STAR, PARACHUTE, M583A1 GREEN STAR, PARACHUTE M661 RED STAR, PARACHUTE, M662 METAL PARTS AND LOADING ASSEMBLING AND PACKING
MIL-I-19028 Revision E:1971 INVERTER (FOR TORPEDO MARK 37 MODS O, O)M(, 1, 2, AND 3)
MIL-A-43759 Revision A:1981 ADAPTERS, AIR LOCK, MUST
MIL-L-28796 Base Document:1973 LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR
MIL-T-28735 Base Document:1970 TEST SET RADAR AM UPM 137
MIL-C-85528 Base Document:1983 CONNECTOR, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, GENERAL SPECIFICATION FOR
MIL-T-28764 Base Document:1971 TEST SET, RADAR, AN/UPM-136
MIL I 82356 : NOTICE 1 INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR
MIL-C-18438 Revision B:1962 CHARGER, BATTERY, GENERATOR TYPE
NASA KSC TM 584 : 1994 CORROSION CONTROL AND TREATMENT MANUAL
MIL-T-85630 Base Document:1983 TUBE MOTOR, FOR 2.75 INCH ROCKET MARK 66
MIL-P-81985 Base Document:1974 PEENING OF METALS
SAE AS 7997:1999 MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR
MIL-A-81852 Revision A:1986 ALTIMETER-ENCODER AAU-32/A
MIL-I-22075 Revision C:1984 Indicator, Bearing-Distance-Heading ID-663D/U
MIL W 28839 : 0 WAVEGUIDE, ELLIPTICAL GENERAL SPECIFICATION FOR
MIL-E-52835 Revision A:1977 ENAMEL, MODIFIED ALKYD, CAMOUFLAGE, LUSTERLESS
MIL S 45310 : H NOTICE 1 SEMITRAILER, TANK, GASOLINE AND FUEL OIL, COMMERCIAL
MIL-W-50930 Base Document:1971 WARHEAD SECTION 762MM ROCKET TRAINING M42'
MIL-W-50932 Base Document:1971 WARHEAD SECTION, 762MM ROCKET, TRAINING: M42, OGIVE FOR
MIL-STD-808 Revision A:1983 FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT
MIL L 52909 : NOTICE 1 LACQUER, ACRYLIC, CAMOUFLAGE, LUSTERLESS
MIL-B-233 Revision D:1987 BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE
MIL-S-29413 Revision B:1988 SHELTER, JOINING CORRIDOR FOR
MIL-W-14980 Revision A:1971 WARHEAD, GUIDED MISSILE, HE, M224 PARTS FOR
MIL-T-21578 Revision A:1966 TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR
TT-R-230 Revision B:1968 REMOVER, PAINT (ALKALI TYPE FOR HOT APPLICATION)
MIL T 25439 : A (1) TRANSMITTER, RATE OF FLOW, IN-FLIGHT REFUELLING, 0-10,000 PPM, TYPE MB-3
MIL S 55041 : C SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR
MIL-C-85642 Base Document:1985 COMMUNICATIONS CENTRAL AN/ASC-26
MIL-B-38401 Revision A:1973 BEACON SET, RADIO AN/URT-33
MIL I 6839 : C INDICATOR, POSITION, LANDING GEAR
MIL-A-81851 Revision B:1986 ALTIMETER AAU-31/A
MIL T 83454 : 0 TERMINAL, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED)
MIL-A-24319 Revision B:1981 ANTENNA, WHIP, 10.67 METERS (35), AS-2537()/SR
MIL-T-27200 Revision C:1975 TRANSMITTER, RATE GYROSCOPE TRU-2A/A
MIL-E-85082 Revision A:1992 ENCODERS, SHAFT ANGLE TO DIGITAL, GENERAL SPECIFICATION FOR
MIL-T-85601 Base Document:1983 TEST SET, INDICATOR AN/APM-433
MIL I 7304 : B INDICATOR, PRESSURE TORQUE SENSITIVE TYPE A 9
MIL-I-5482 Revision C:1960 INDICATOR, PRESSURE, SYNCHRO, AIRCRAFT 165 DEGREE SCALE
MIL-M-24144 Revision D:1988 Monitors, Frost-Point/Dew-Point, Compressed Air, Semi-Portable (Future Acquisitions for this item may Refer to ST000-AG-IDX-010)
MIL A 29563 : 0 ANTENNA SYSTEM, AIMS SHIPBOARD, ELECTRONICALLY STEERED OE-120/UPX
MIL-C-81790 Revision A:1990 CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR
SAE AS 85376 : 2007 STAND, SHIPBOARD, HELICOPTER MAINTENANCE
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
BS EN 4660-004:2011 Aerospace series. Modular and open avionics architectures Packaging
STANAG 4626 : 2013 MODULAR AND OPEN AVIONICS ARCHITECTURE
MIL-R-19309 Revision D:2003 RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2)
MIL G 6162 : B GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION
NASA MSFC SPEC 250 : 1963 PROTECTIVE FINISHES FOR SPACE VEHICLE STRUCTURES AND ASSOCIATED FLIGHT EQUIPMENT GENERAL SPECIFICATION FOR
MIL-C-24105 Revision D:1995 CONVERTERS, SYNCHRO SIGNAL (PANEL MOUNTED) GENERAL SPECIFICATION FOR
MIL-P-43155 Revision F:1984 PRINTING PLANT, SPECIAL WARFARE, TRANSPORTABLE, (LIGHTWEIGHT) MODEL 800
MIL-S-29410 Revision B:1988 SHELTER ASSEMBLY, RIGID GENERAL PURPOSE
I.S. EN 6101:2016 AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
MIL I 5099 : B INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1
MIL I 25725 : A INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8
MIL-I-18804 Revision B:1964 INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH
MIL-C-11198 Revision K:1984 CHEST, ICE STORAGE
MIL-B-543 Revision G:1990 BUCKLE, TONGUELESS AND WEB STRAP
MIL I 38135 : B (3) INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY
MIL-R-24358 Base Document:1968 RESTORATION SHIPBOARD ELECTRONIC EQUIPMENT F, 1N AND 2N COGNIZANCE
MIL-I-21718 Base Document:1958 INDICATOR, AIRSPEED, PITOT STATIC, MAXIMUM ALLOWABLE SPEED, 4O-4OO KNOTS
MIL G 8360 : A GAGE, PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE, 10-75 IN MERCURY TYPE MB 1
DSCC 85075 : B SUPPORT, ELECTRICAL CARD HOLDER, MOUNTING BAR
MIL-S-29412 Revision C:1994 SHELTER, COMPLEXING KIT FOR
MIL-A-23282 Revision B:1965 ACTUATOR
MIL-S-83315 Base Document:1971 SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY
MIL-L-21652 Revision A:1964 LIGHT, BEACON, ANTI COLLISION AIRCRAFT GENERAL SPECIFICATION FOR
MIL L 46142 : 0 LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING
MIL L 52962 : 0 LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS
MIL-H-18911 Revision A:1974 HEAD AND MOTOR, ROCKET, INERT PARTS, PAINTING AND MARKING
MIL T 6349 : C NOTICE 1 TEST SET, SYNCHRO
MIL-I-26689 Revision C:1981 INDICATOR, HORIZONTAL SITUATION, AQU-2/A
MIL-I-58067 Revision A:1977 INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR
MIL A 22641 : D ADAPTOR, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR
MIL F 50907 : NOTICE 1 FIRING DEVICE, ANTI PERSONNEL MINE, XM 123 PARTS & ASSEMBLY
MIL-N-3336 Revision A:1964 NUT, SHEET SPRING, INSTRUMENT MOUNTING
MIL-R-14821 Base Document:1968 REMOVER, AIRCRAFT CANOPY. M9 REMANUFACTURED METAL PARTS ASSEMBLY
MIL L 3661 : B LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR
MIL-DTL-50869 Revision F Interim Revision:2004 Fuze, Point Initiating, Base Detonating (PIBD) - M550, Less Spitback Assembly Loading, Assembling, and Packing
MIL M 7793 : F METER, TIME TOTALIZING
MIL C 27889 : D COMPUTER, TRANSDUCER, ALTITUDE, ALTITUDE ENCODING, CPU-46/A, GENERAL SPECIFICATION FOR AND MTU-38/A MOUNTING TRAY
MIL-A-25915 Revision A:1980 ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2
MIL S 3928 : D SWITCH, (COAXIAL) RADIO FREQUENCY TRANSMISSION LINE, GENERAL SPECIFICATION FOR
MIL-G-81168 Base Document:1964 GYROSCOPE, RATE INTEGRATING
MIL-S-24317-9 Revision B:2006 Switches, Multistation, Push Button, Matrix Arrangement Plug-In Module, 2 Amperes, Unsealed, Type SM09L1
MIL-C-81991 Base Document:1975 CONVERTER, AIRCRAFT DC TO DC, BOOST GENERAL SPECIFICATION FOR
MIL-HDBK-83377 Base Document:1997 ADHESIVE BONDING (STRUCTURAL) FOR AEROSPACE AND OTHER SYSTEMS, REQUIREMENTS FOR
MIL-DTL-44285 Revision A:2000 DOORS, DOUBLE BUMP THROUGH
MIL-C-81740 Base Document:1969 COATING, ALUMINUM AND ALUMINUM ALLOYS (METALLIC COMPOUND DECOMPOSITION)
MIL I 83452 : LATEST INDICATOR, TAPE TYPE, GENERAL SPECIFICATION FOR
MIL-C-26485 Revision D:1968 CONTROL ASSEMBLY, ATTITUDE, GYROSCOPIC AF/A24G-1A
MIL-R-23761 Revision B:1975 Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for
MIL-I-22126 Revision B:1972 INDICATOR, TORQUEMETER, ENGINE, TURBOPROP
MIL-I-23366 Revision B:1987 INDICATOR, HORIZONTAL SITUATION ID-1O13(*)/A
MIL A 25088 : C
MIL-I-25861 Revision D:1967 INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED
MIL-C-81946 Base Document:1973 COATING SYSTEM, THERMAL INSULATION, INTUMESCENT
MIL-P-19692 Revision E:1994 PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR
MIL C 22750 : F COATING, EPOXY, VOC-COMPLIANT
MIL-S-70334 Base Document:1987 SHIM, SOLID GENERAL SPECIFICATION FOR
MIL-G-7734 Revision C:1981 GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT
MIL-C-172 Revision C:1958 CASES: BASES, MOUNTING & MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT)
MIL S 24251 : B SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR
MIL-H-27269 Revision A:1977 HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1
MIL-R-60897 Base Document:1968 REMOVER, AIRCRAFT CANOPY, M8A1 METAL PARTS ASSEMBLY (CONVERSION)
MIL-G-23723 Base Document:1964 GYROSCOPE, RATE SWITCHING CN-495/AJB-3
MIL-S-81771 Revision A:1975 Seat System; Aircrew, Crash Resistant; General Specification for
MIL G 23701 : 0 MILITARY SPECIFICATION GYROSCOPE, RATE SWITCHING AN/ASN-52
MIL-C-8412 Revision B:1969 COMPASS, MAGNETIC, SLAVED GYRO, TYPE J-4
MIL-PRF-22885-112 Revision A:2013 Switches, Pushbutton, White Light Emitting Diode (LED) Illuminated, Standard, Night Vision Imaging System (NVIS) and Sunlight Readable Displays, Dimmable, SPDT and DPDT, Low Level to 7 Amperes, Sealed and Unsealed, Solder and Common Termination System (CTS) Terminations
MIL I 7069 : A NOTICE 1 INDICATORS, TACHOMETER, ELECTRIC, PERCENT SPEED TYPE, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-S-63302 Base Document:1979 SAFETY AND ARMING ASSEMBLIES FOR MINES: M74 AND M75
MIL C 28754/21 : E CONNECTOR, ELECTRICAL, MODULAR, FRAME, CASTING, TYPE 4, DOUBLE SPAN
MIL-S-63326 Base Document:1981 SAFETY AND ARMING ASSEMBLIES FOR MINES: BLU-91/B AND BLU-92/B
DOD-E-8983 Revision C:1977 ELECTRONIC EQUIPMENT, AEROSPACE, EXTENDED SPACE ENVIRONMENT, GENERAL SPECIFICATION FOR
MIL I 6424 : A NOTICE 1 INDICATOR, INDUCTION COMPASS, TYPE V 8
MIL-A-23088 Revision A:1963 AMPLIFIER, RADIO FREQUENCY AM-3198
MIL I 26359 : B INDICATOR, ATTITUDE, REMOTE ARU-4/A
MIL-P-9389 Revision A:1987 PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3
MIL P 23971 : B POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-P-83126 Revision A:1980 PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR
MIL C 50509 : A CARTRIDGE, 40MM, WHITE STAR, CLUSTER, M585A1 METAL PARTS FOR AND LOADING, ASSEMBLING AND PACKING
MIL-T-19646 Revision A:1990 THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED
MIL-D-21625 Revision G:1993 DESIGN AND EVALUATION OF CARTRIDGES FOR CARTRIDGE ACTUATED DEVICES
MIL-S-29411 Revision B:1988 SHELTER ASSEMBLIES, 10 FOOT AND 20 FOOT ELECTROMAGNETIC INTERFERENCE
MIL-T-38306 Base Document:1964 TRANSMITTER, RATE GYROSCOPE T 970/AJB - 7
MIL-L-3890-3 Revision A:1970 LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL, AIR DIELECTRIC] 50 OHMS TYPE RG 382/U
MIL P 22636 : NOTICE 1 PRIMER COATING; FOR RED FUMING NITRIC ACID RESISTANT PAINT
MIL C 28754 : D CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
MIL C 28754/23 : F CONNECTOR, ELECTRICAL, MODULAR, CONNECTOR ASSEMBLY, TYPE 4, SINGLE SPAN
MIL-H-9896 Revision C:1988 HARDWARE, UNIVERSAL LOAD CARRYING SLING
JSSG-2010-12 Base Document:1998 Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook
MIL-S-52377 Revision D:1990 SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED
MIL-S-48405 Base Document:1973 Shielded and Confined Mild Detonating Cord Assemblies
ARINC 404B-2:2015 CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS
MIL STD 194 : A NOTICE 2 SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL
L-P-1040 Revision B:1977 PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE)
MIL-B-23072 Base Document:1961 BLOWER, ANTI-EXPOSURE SUIT VENTILATION, GENERAL SPECIFICATION FOR
MIL-A-27198 Revision B:1987 ALTIMETER, PRESSURE AAU-7/A
MIL-C-9075 Revision A:1968 COMPUTER AND TRANSMITTER, TRUE AIRSPEED, PITOT STATIC, 150-900 KNOTS, TYPE MA 1
MIL-R-7885 Revision D:1988 RIVET, BLIND, STRUCTURAL, MECHANICALLY LOCKED SPINDLE AND FRICTION LOCKED SPINDLE, GENERAL SPECIFICATION FOR
MIL A 83419 : C ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY
MIL-A-22165 Base Document:1959 AMPLIFIER, COMPASS, SERVO (TYPE MF-1 COMPASS)
MIL I 7491 : B INDICATOR RATE OF FLOW, FUEL TOTALIZING, SERVO STYLE, TYPE F 1
MIL-I-21685 Base Document:1958 INDICATOR, COMPASS REPEATER, ROTATING DIAL, TYPE MW-2
SAE AMS 3146 : 2000 COATING, INTERIOR AIRCRAFT CABIN LOW HEAT AND SMOKE RELEASE
MIL-A-81403 Base Document:1967 ALTIMETER-ENCODER, AAU-21/A
MIL-A-27261 Revision A:1966 ACCELEROMETER, AIRCRAFT
MIL P 43184 : 0 PLATFORM COMPONENTS, AIR DELIVERY. MODULAR (DUAL RAIL SYSTEM), TYPE II
SAE AMS 3259 : 1997 SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C)
SAE AMS P 81985 : 2001 PEENING OF METALS
ARINC 654 : 1994 ENVIRONMENTAL DESIGN GUIDELINES FOR INTEGRATED MODULAR AVIONICS PACKAGING AND INTERFACES
PREN 6101 : 200P2 AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
BS EN 6101:2016 Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series
BS EN 6080:2016 Aerospace series. Rivet, 100° normal flush head, close tolerance. Inch series
PREN 6069 : 200P3 AEROSPACE SERIES - RIVET, 100 DEGREES REDUCED FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
BS EN 6081:2016 Aerospace series. Rivet, universal head, close tolerance. Inch series
EN 6080:2016 Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series
EN 6081:2016 Aerospace series - Rivet, universal head, close tolerance - Inch series
EN 6101:2016 Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
EN 4660-004:2011 Aerospace series - Modular and Open Avionics Architectures - Part 004: Packaging
MIL-S-83318 Revision A:1991 SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
MIL-B-36120 Base Document:1962 BACK REST, LITTER, NONADJUSTABLE
MIL-PRF-81733 Revision D:1998 SEALING AND COATING COMPOUND, CORROSION INHIBITIVE
MIL C 85285 : C
MIL-C-81947 Revision A:1975 COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT
MIL F 50864 : B FUZE, PIBD, M549, LESS SPITBACK METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING
MIL-B-81934 Revision B:1991 BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING
MIL-A-49079 Revision A:1986 ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF)
MIL S 4510 : E SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE
MIL-F-8378 Revision B:1975 FREQUENCY METERS, AIRCRAFT 380 TO 420 HERTZ AND 350 TO 450 HERTZ
MIL-T-27-233 Base Document:1978 TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ
MIL-A-25933 Revision B:1985 ALTIMETER, PRESSURIZED COMPARTMENT, INTEGRALLY LIGHTED 0-50,000 FEET, 1-7/8 INCH DIAL
I.S. EN 6081:2016 AEROSPACE SERIES - RIVET, UNIVERSAL HEAD, CLOSE TOLERANCE - INCH SERIES
MIL-A-26360 Revision B:1982 AMPLIFIER, ELECTRONIC CONTROL ASU-3/A
MIL-A-27330 Revision B:1987 ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A
MIL-S-21277 Revision A:1958 SWITCH, LIQUID LEVEL, GENERAL SPECIFICATION FOR
MIL L 81352 : A LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS)
MIL-T-81838 Base Document:1971 TANK, FUEL, AIRCRAFT, AUXILIARY EXTERNAL 300 GALLON, TYPE AERO 1D
MIL T 83174 : B (3) TRANSMITTER, ACCELEROMETER, AXIAL
MIL S 8932 : A SWITCH, PRESSURE, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-A-85505 Base Document:1983 ALTIMETER, STANDBY, TYPES 1 AND 2
MIL-M-83524 Base Document:1985 MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS
MIL PRF 62478 : A COUPLER, OPTICAL
MIL-A-83212 Revision A:1976 ALTIMETER, PRESSURE AAU-27/A
MIL-P-21415 Revision C:1973 PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE
MIL-R-81903 Revision A:1977 REMOVER, ACID ACTIVATED, FOR AMINE CURED EPOXY COATING SYSTEMS
MIL-W-87105 Base Document:1977 WAVEGUIDE ASSEMBLIES, GENERAL SPECIFICATION FOR
MIL-I-27680 Revision C:1973 INDICATOR, ATTITUDE, ARU-12/A, REMOTE
SAE AS 85075 : 2000 TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR
MIL-R-81835 Base Document:1971 REMOVER, ORGANIC COATING, HOT TANK TYPE
MIL-R-25410 Revision G:1991 REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING
DOD-HDBK-343 Base Document:1986 DESIGN, CONSTRUCTION, & TESTING REQUIREMENTS FOR ONE OF A KIND SPACE EQUIPMENT
TT-E-529 Revision G:1988 ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT
MIL-HDBK-1568 Base Document:1996 MATERIAL AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN AEROSPACE WEAPONS SYSTEMS
15/30327754 DC : 0 BS EN 4660-004 - AEROSPACE SERIES - MODULAR AND OPEN AVIONICS ARCHITECTURES - PART 004: PACKAGING
MIL-I-27623 Revision C:1972 INDICATOR, ATTITUDE, REMOTE STANDBY, 2 INCH
MIL-I-83117 Revision B:1975 INDICATOR, ANGLE OF ATTACK
MIL-M-24605 Revision A:1988 MONITOR, HEAT STRESS
MIL C 83488 : C COATING, ALUMINUM, ION VAPOR DEPOSITED
MIL P 47115 : A PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT
MIL-S-43766 Revision A:1988 SUPPORT ASSEMBLY, ARCH, INFLATABLE SHELTER SECTION (MUST)
MIL-V-18318 Revision B:1966 VALVE, PRESSURE REGULATING, OXYGEN SYSTEM
MIL-T-26963 Revision D:1992 TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE TYPE MP-1
MIL-I-25941 Revision D:1986 INDICATOR, TURN AND SLIP, 2-INCH SIZE, INTEGRALLY LIGHTED
MIL-DTL-28754-67 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, CENTER
MIL T 18460 : 0 TEST SET, INDICATOR, AN/APM-74
MIL-C-87970 Base Document:1982 CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129
MIL-G-27693 Revision A:1962 GYROSCOPE, DISPLACEMENT SBU-6/A, ROLL AND PITCH
MIL-G-22077 Revision C:1993 GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE
MIL-G-5678 Revision C:1964 GAGE PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE
MIL-DTL-83488 Revision D:1999 COATING, ALUMINUM, HIGH PURITY
MIL-I-27848 Revision B:1994 INDICATOR, HORIZONTAL SITUATION AQU-4/A
MIL G 5413 : D NOTICE 1 GENERATOR, TACHOMETER, FOUR POLE
MIL P 23377 : G PRIMER COATING, EPOXY, HIGH SOLIDS
MIL-G-25591 Revision E:1981 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
MIL T 25435 : B TRANSMITTER, PRESSURE, AIRCRAFT, VARIABLE RELUCTANCE TYPE, GENERAL SPECIFICATION FOR
MIL-I-5415 Revision C:1987 INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR
MIL-I-38258 Base Document:1965 INDICATOR, ATTITUDE ARU 18/A DIRECTOR
MIL-DTL-32175 Base Document:2004 FUZE, PIBD - M549A1, LESS SPITBACK ASSEMBLY
MIL M 62361 : C MOTOR, DRIVE, DIRECT CURRENT 2 RPM/8RPM
NASA MSFC PROC 547 : 2014 POLYURETHANE COATING, APPLICATION OF
MIL-I-27619 Revision G:1974 INDICATORS, ATTITUDE DIRECTOR
MIL-C-23157 Revision D:1979 CLIPBOARD, PILOTS, MXU-163/P AND MARK 2A
MIL-A-38140 Revision B:1977 ALTIMETER, PRESSURE AAU-16/A
MIL-T-58082 Revision A:1974 TESTER, PYROMETER & THERMOCOUPLE, FIELD, TYPE N-3A
MIL-T-5583 Revision C:1987 Transmitter, Position, 28 Volts DC
MIL W 6496 : B NOTICE 1 WINCH, DRUM, ENGINE OF TURRET HOIST, TYPE A-1
MIL-M-7969 Revision C:1965 Motors, Alternating Current, 400-Cycle, 115/200-Volt System, Aircraft, General Specification for
MIL I 27851 : B INDICATOR, INDICATED AIRSPEED AVU-17/A
MIL-T-25307 Revision D:1985 TRANSMITTER, PRESSURE, HYDRAULIC, TYPE MJ-1
MIL A 25949 : E (2) ACCELEROMETER, AIRCRAFT RANGE -5 TO PLUS 1OG UNITS, INTEGRALLY LIGHTED
MIL-I-25437 Revision B:1984 INDICATORS, AIRCRAFT, PRESSURE, VOLTAGE RATIO TYPE, GENERAL SPECIFICATION FOR
MIL-I-8974 Revision A:1981 INDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FOR
MIL M 62368 : A MOTOR, GEARHEAD, 18-30 VOLTS, DIRECT CURRENT
MIL-A-43326 Revision A:1983 ALTAR, PORTABLE
MIL L 25866 : B LIGHT, EMERGENCY EXIT, AIRCRAFT LEU AND 1-A
MIL-I-23524 Revision A:1986 INDICATOR, ATTITUDE DIRECTOR, REMOTE, ID 1329A (V)
MIL-P-85034 Base Document:1976 POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN
MIL C 15370 : F COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR
DOD-C-85050 Base Document:1982 CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL C 7115 : F CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL G 9398 : C GENERATOR, TACHOMETER, TWO POLE HIGH TEMPERATURE AIRCRAFT
MIL-P-24764 Base Document:1991 POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR
MIL I 27190 : B INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI
MIL-I-26299 Revision G:1990 INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED
MIL-D-38134 Revision A:1971 DETECTOR, MAGNETIC AZIMUTH DSU-4/A, HIGH TEMPERATURE
MIL-I-23832 Revision A:1980 INDICATOR, TACHOMETER, TRIPLE POINTER, HELICOPTER
MIL-I-81049 Revision A:1972 INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION
MIL C 38333 : 0 CONTROLLER, COMPASS SYSTEM C-6448/ASN-55
MIL-W-50258 Revision A:1971 WARHEAD SECTION, 762MM ROCKET, PRACTICE: M38 METAL PARTS FOR
MIL L 6484 : C LIGHT, COCKPIT UTILITY, AIRCRAFT GENERAL SPECIFICATION FOR
MIL-M-63394 Base Document:1980 MINE, ANTI-TANK: HE, M75 METAL PARTS FOR
MIL-S-24317-12 Revision B:2006 Switch, Multistation, Pushbutton, Illuminated Matrix Arrangement, Sunlight Readable, 4 Lamp, Plug-In Module, Style SM12L1 (No S/S Document)
MIL I 83361 : (4) INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI
MIL-B-8621 Revision A:1964 BOARD, CHART, MARK 6A MARK 6B AND MARK 6C
NASM25027:2012 NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
MIL-C-5191 Revision B:1953 COMPUTER AND TRANSMITTER, TRUE AIRSPEED PITOT STATIC, TYPE A-2
MIL-DTL-43695 Revision C:2000 FRAME SECTIONS, TENT, FRAME TYPE, EXPANDABLE
MIL M 5388 : B MACHMETER; PITOT STATIC OPERATED, RANGE 0.5 TO 1.5, TYPE A-2B
MIL-R-24243 Revision C:1987 RIVET, BLIND, NON-STRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR
MIL-PRF-87937 Revision D:2001 CLEANING COMPOUND, AEROSPACE EQUIPMENT
MIL P 14458 : A NOTICE 1 PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT
MIL-W-5013 Revision L:1991 WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-C-85049-94 Base Document:1993 CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE FLANGE TYPE, FULL MOUNTING PERIMETER DEVICE, TYPE I (HEAVY DUTY)
MIL F 14072 : D FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
MIL-B-50896 Base Document:1971 BATTERY HOUSING, ASSEMBLY
MIL T 25627 : C TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP
MIL-C-53071 Base Document:1987 COUPLING ASSEMBLIES, QUICK-DISCONNECT, SEXLESS TYPE
MIL-A-27391 Revision B:1963 ALTIMETER, PRESSURE AAU-2A
MIL C 28754/22 : G CONNECTOR, ELECTRICAL, MODULAR, FRAME, CASTING, TYPE 4, SINGLE SPAN
SAE AMS R 81835 : 2008 REMOVER, ORGANIC COATING, HOT TANK TYPE
SAE AS 916 : 2016 OXYGEN FLOW INDICATORS
SAE AS 5994A:2000(S2013) PUMP UNITS, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY
PREN 6080 : 200P3 AEROSPACE SERIES - RIVET, 100 DEGREES NORMAL FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES
PREN 6081 : 200P2 AEROSPACE SERIES - RIVET, UNIVERSAL HEAD, CLOSE TOLERANCE - INCH SERIES
PREN 6052 : 200P1 AEROSPACE SERIES - RIVETS - COLLAR - SYSTEM IN ALUMINIUM ALLOY SHEAR TYPE INCH SERIES - TECHNICAL SPECIFICATION

MIL P 85582 : B PRIMER COATINGS: EPOXY, WATERBORNE
MIL P 23377 : G PRIMER COATING, EPOXY, HIGH SOLIDS
QQ-A-250-11 Revision F:1982 ALUMINUM ALLOY 6061, PLATE AND SHEET
FED-STD-141 Revision D:2001 PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES

View more information
$32.74
Including GST where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Need help?
Call us on 131 242, then click here to start a Screen Sharing session
so we can help right away! Learn more