• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM C 518 : 2017 : REDLINE

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Available format(s)

PDF

Superseded date

12-10-2021

Language(s)

English

Published date

01-05-2017

CONTAINED IN VOL. 04.06, 2017 Defines the measurement of steady state thermal transmission through flat slab specimens using a heat flow meter apparatus.

1.1This test method covers the measurement of steady state thermal transmission through flat slab specimens using a heat flow meter apparatus.

1.2The heat flow meter apparatus is used widely because it is relatively simple in concept, rapid, and applicable to a wide range of test specimens. The precision and bias of the heat flow meter apparatus can be excellent provided calibration is carried out within the range of heat flows expected. This means calibration shall be carried out with similar types of materials, of similar thermal conductances, at similar thicknesses, mean temperatures, and temperature gradients, as expected for the test specimens.

1.3This a comparative, or secondary, method of measurement since specimens of known thermal transmission properties shall be used to calibrate the apparatus. Properties of the calibration specimens must be traceable to an absolute measurement method. The calibration specimens should be obtained from a recognized national standards laboratory.

1.4The heat flow meter apparatus establishes steady state one-dimensional heat flux through a test specimen between two parallel plates at constant but different temperatures. By appropriate calibration of the heat flux transducer(s) with calibration standards and by measurement of the plate temperatures and plate separation. Fourier’s law of heat conduction is used to calculate thermal conductivity, and thermal resistivity or thermal resistance and thermal conductance.

1.5This test method shall be used in conjunction with Practice C1045. Many advances have been made in thermal technology, both in measurement techniques and in improved understanding of the principles of heat flow through materials. These advances have prompted revisions in the conceptual approaches to the measurement of the thermal transmission properties (1-4).2 All users of this test method should be aware of these concepts.

1.6This test method is applicable to the measurement of thermal transmission through a wide range of specimen properties and environmental conditions. The method has been used at ambient conditions of 10 to 40°C with thicknesses up to approximately 250 mm, and with plate temperatures from –195°C to 540°C at 25-mm thickness (5, 6).

1.7This test method may be used to characterize material properties, which may or may not be representative of actual conditions of use. Other test methods, such as Test Methods C236 or C976 should be used if needed.

1.8To meet the requirements of this test method the thermal resistance of the test specimen shall be greater than 0.10 m2·K/W in the direction of the heat flow and edge heat losses shall be controlled, using edge insulation, or a guard heater, or both.

1.9It is not practical in a test method of this type to try to establish details of construction and procedures to cover all contingencies that might offer difficulties to a person without pertinent technical knowledge. Thus users of this test method shall have sufficient knowledge to satisfactorily fulfill their needs. For example, knowledge of heat transfer principles, low level electrical measurements, and general test procedures is required.

1.10The user of this method must be familiar with and understand the Annex. The Annex is critically important in addressing equipment design and error analysis.

1.11Standardization of this test method is not intended to restrict in any way the future development of improved or new methods or procedures by research workers.

1.12Since the design of a heat flow meter apparatus is not a simple matter, a procedure for proving the performance of an apparatus is given in Appendix X3.

1.13The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.14This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.15This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 16
DocumentType
Redline
Pages
21
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

Standards Relationship
UNE 92202:1989 Identical

ASTM C 1132 : 1995 Standard Practice for Calibration of the Heat Flow Meter Apparatus (Withdrawn 2002)
BS EN ISO 22007-1:2017 Plastics. Determination of thermal conductivity and thermal diffusivity General principles
ACI 523.2R : 1996 GUIDE FOR PRECAST CELLULAR CONCRETE FLOOR, ROOF AND WALL UNITS
MIL-PRF-32433 Base Document:2012 BLANKET, WASHABLE, FLAME RESISTANT, SHIPBOARD
ACI 523.1R : 2006 GUIDE FOR CAST-IN-PLACE LOW DENSITY CELLULAR CONCRETE
MIL-P-15280 Revision J:1988 PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES)
HH-I-1972-5 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE BOARD ON BOTH SIDES OF THE FOAM
MIL-DTL-32585 Base Document:2017 Insulation, Thermal and Acoustic, Fibrous Glass
HH-I-1972 Base Document:1981 INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE
MIL-PRF-47009 Revision D:2006 COMPOUND, SILICONE, HEAT SINK
ASTM C 335 : 2005 : REV A Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
HH-I-558 Revision C:1992 INSULATION, BLANKETS, THERMAL (MINERAL FIBER, INDUSTRIAL TYPE)
MIL-PRF-32161 Base Document:2004 INSULATION, HIGH TEMPERATURE FIRE PROTECTION, THERMAL AND ACOUSTIC
CSA Z245.30 : 2014 FIELD-APPLIED EXTERNAL COATINGS FOR STEEL PIPELINE SYSTEMS
ASTM C 209 : 2015 : REDLINE Standard Test Methods for Cellulosic Fiber Insulating Board
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASTM F 433 : 2002 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM D 6744 : 2006 : R2011 : EDT 1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
I.S. EN ISO 22007-1:2017 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES (ISO 22007-1:2017)
ASTM E 1231 : 2015 : REDLINE Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
ASTM C 1427 : 2016 : REDLINE Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
ASTM C 449/C449M : 2000 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
ASTM E 1091 : 2013 : REDLINE Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
ASTM C 1003 : 1983 : R1992 : EDT 1 Test Method for Thermal Performance of Cooling-Air Duct Sections, Using a Calibrated Hot Box (Withdrawn 1997)
ASTM C 1033 : 1985 : R2000 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically (Withdrawn 2003)
ASTM D 4612 : 2016 : REDLINE Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
ASTM C 1149 : 2017 : REDLINE Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
ASTM C 1058/C1058M : 2010 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ISO 12567-1:2010 Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors
ASTM C 1512 : 2010 : R2015 : EDT 1 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM C 335 : 2005 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C 196 : 2000 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C 656 : 2017 : REDLINE Standard Specification for Structural Insulating Board, Calcium Silicate
ASTM C 1373/C1373M : 2011 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
ASTM C 1774 : 2013 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems
ASTM D 7425 : 2008 Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
ASTM D 7425/D7425M : 2013 : REDLINE Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
DIN EN ISO 12567-1:2010-12 Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010)
MIL-STD-883 Revision K:2016 TEST METHOD STANDARD - MICROCIRCUITS
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
ASTM E 2336 : 2016 : REDLINE Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
ASHRAE 189.1 : 2014 DESIGN OF HIGH-PERFORMANCE GREEN BUILDINGS
ASTM C 196 : 2000 : R2005 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C 1859:2017 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Side Wall Applications
ASTM C 196 : 2000 : R2010 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
HH-I-1972-3 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE INSULATION BOARD ON ONE SIDE AND ASPHALT/ORGANIC FELT OR ASPHALT/GLASS FIBER FELT ON THE OTHER SIDE OF THE FOAM
HH-I-1972-1 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE, FACED WITH ALUMINUM FOIL ON BOTH SIDES OF THE FOAM
ASTM C 1512 : 2010 : R2015 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM C 516 : 2008 : R2013 : EDT 1 Standard Specification for Vermiculite Loose Fill Thermal Insulation
ASTM C 610 : 2017 : REDLINE Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
ASTM C 335 : 2005 : REV A : EDT 1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C 1676/C1676M : 2014 : REDLINE Standard Specification for Microporous Thermal Insulation
ASTM C 447 : 2015 : REDLINE Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM C 1199 : 2014 : REDLINE Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
ASTM C 1045 : 2007 : R2013 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
ASTM C 1410 : 2017 : REDLINE Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
ASTM C 739 : 2017 : REDLINE Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
ASTM C 991 : 2016 : REDLINE Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
ASTM C 449 : 2007 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
ASTM C 1086 : 2009 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
ASTM C 653 : 2017 : REDLINE Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
ASTM C 549 : 2006 Standard Specification for Perlite Loose Fill Insulation
ASTM C 640 : 1983 Specification for Corkboard and Cork Pipe Thermal Insulation (Withdrawn 1994)
ASTM C 1058/C1058M : 2010 : R2015 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
ASTM C 533 : 2017 : REDLINE Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
ASTM D 5140 : 1995 Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)
ASTM E 936 : 1998 : R2004 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)
ASTM C 1373 : 2003 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
ASTM C 1046 : 1995 : R2013 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM C 553 : 2013 : REDLINE Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM C 612 : 2014 : REDLINE Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C 592 : 2016 : REDLINE Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
NEMA LE 7:2015 Recessed Luminaires Intended for Contact with Expanding Polyurethane Foam Insulation
ASTM C 726 : 2017 : REDLINE Standard Specification for Mineral Wool Roof Insulation Board
HH-I-1972-2 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH ASPHALT/ORGANIC FELT, ASPHALT/ASBESTOS FELT OR ASPHALT/GLASS FIBER FELT ON BOTH SIDES OF THE FOAM
HH-I-1972-4 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH GYPSUM BOARD ON SIDE AND ALUMINUM FOIL OR ASPHALT/ORGANIC FELT ON THE OTHER SIDE OF THE FOAM
16/30330542 DC : 0 BS EN ISO 22007-1 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 1: GENERAL PRINCIPLES
09/30195952 DC : 0 BS ISO 12567-1 - THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS
HH-I-521 Revision F:1980 INSULATION BLANKETS, THERMAL (MINERAL FIBER, FOR AMBIENT TEMPERATURES)
ASTM D 2341 : 1981 Specification for Rigid Urethane Foam (Withdrawn 1988)
SAE AIR 6232 : 2013 AIRCRAFT SURFACE COATING INTERACTION WITH AIRCRAFT DEICING/ANTI-ICING FLUIDS
MIL-PRF-32567 Base Document:2017 BATTING, SYNTHETIC FIBERS, UNQUILTED
ASTM C 195 : 2007 Standard Specification for Mineral Fiber Thermal Insulating Cement
ASTM D 5930 : 2017 : REDLINE Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM C 1046 : 1995 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM C 1784 : 2014 : REDLINE Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM C 1114 : 2006 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ISO 22007-1:2017 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 1: General principles
I.S. EN ISO 12567-1:2010 THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY THE HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS
ASTM C 1363 : 2011 : REDLINE Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C 1224 : 2015 : REDLINE Standard Specification for Reflective Insulation for Building Applications
ASTM E 861 : 2013 : REDLINE Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
ASTM D 6744 : 2006 : R2017 : EDT 1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM C 764 : 2017 : REDLINE Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
ASTM C 800 : 2014 : REDLINE Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
ASTM C 1594 : 2011 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
ASTM C 1728 : 2017 : REDLINE Standard Specification for Flexible Aerogel Insulation
ASTM C 1130 : 2017 : REDLINE Standard Practice for Calibration of Thin Heat Flux Transducers
ASTM C 195 : 2007 : R2013 Standard Specification for Mineral Fiber Thermal Insulating Cement
ASTM E 1730 : 2015 : REDLINE SPECIFICATION FOR RIGID FOAM FOR USE IN STRUCTURAL SANDWICH PANEL CORES
ASTM C 1482 : 2017 : REDLINE Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
ASTM C 1045 : 2007 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
ASTM C 1046 : 1995 : R2001 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
EEMUA 207 : 2009 DOUBLE CONCRETE TANKS FOR LIQUEFIED GAS - GUIDE TO DESIGN, CONSTRUCTION AND OPERATION
ICC IECC CODE AND COMMENTARY : 2015 IECC® Code and Commentary
ASTM D 4819 : 2013 : REDLINE Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
EN ISO 12567-1:2010/AC:2010 Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors - Technical Corrigendum 1 (ISO 12567-1:2010/Cor 1:2010)
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
ASTM C 1290 : 2016 : REDLINE Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
UNI EN ISO 12567-1 : 2010 THERMAL PERFORMANCE OF WINDOWS AND DOORS - DETERMINATION OF THERMAL TRANSMITTANCE BY THE HOT-BOX METHOD - PART 1: COMPLETE WINDOWS AND DOORS
ASHRAE HDBK REFRIGERATION : 2014 ASHRAE HANDBOOK - REFRIGERATION
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ASTM C 1033 : 1985 : R1994 : EDT 1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically
ASTM C 665 : 2017 : REDLINE Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ASTM D 4098 : 1982 : R1987 : EDT 1 Practice for Evaluating High-Density Rigid Cellular Thermosets (Withdrawn 1994)
HH-I-1972-6 Base Document:1981 INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH MINERAL FIBERBOARD ON ONE SIDE OF THE FOAM AND GLASS MAT ON THE OTHER SIDE OF THE FOAM
ASTM C 976 : 1990 : R1996 : EDT 1 Standard Test Method for Thermal Performance of Building Assemblies by Means of a Calibrated Hot Box (Withdrawn 2002)
MIL-PRF-32514 Base Document:2015 INSULATION, ANTI-SWEAT, REFRIGERANT, AND THERMAL FOAM
ASTM E 2684 : 2017 : REDLINE Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
CSA A453 : 0 ENERGY PERFORMANCE EVALUATION OF SWINGING DOORS
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
ASTM C 1013 : 1994 Specification for Faced Rigid Cellular Polyisocyanurate Roof Insulation (Withdrawn 1997)
API 17U : 2015 RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASTM E 1530 : 2011 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
ASTM C 335/C335M : 2017 : REDLINE Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C 1594 : 2011 : R2017 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
ASTM C 1046 : 1995 : R2007 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
ASTM E 936 : 1998 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
ASTM C 1029 : 2015 : REDLINE Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
ASTM C 196 : 2000 : R2016 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
ASTM C 680 : 2014 : REDLINE Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
ASTM C 1014 : 2017 : REDLINE Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
ASTM C 1470 : 2006 : R2013 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
ASTM C 1512 : 2010 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
ASTM C 1667 : 2015 : REDLINE Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
ASTM C 1696 : 2016 : REDLINE Standard Guide for Industrial Thermal Insulation Systems
ASTM E 1591 : 2013 Standard Guide for Obtaining Data for Fire Growth Models
ASTM C 1393 : 2014-02 SPECIFICATION FOR PERPENDICULARLY ORIENTED MINERAL FIBER ROLL AND SHEET THERMAL INSULATION FOR PIPES AND TANKS
BS EN ISO 12567-1:2010 Thermal performance of windows and doors. Determination of thermal transmittance by the hot-box method Complete windows and doors
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
MIL-I-742 Revision F:1980 INSULATION BOARD, THERMAL, FIBROUS GLASS
CGSB 4.2-70.1 : 1994 TEXTILE TEST METHODS - THERMAL INSULATION PERFORMANCE OF TEXTILE MATERIALS
AASHTO M 230 : 2007 SPECIFICATION FOR EXPANDED AND EXTRUDED FOAM BOARD (POLYSTYRENE)
CSA S500 : 2014 THERMOSYPHON FOUNDATIONS FOR BUILDINGS IN PERMAFROST REGIONS
ASTM C 516 : 2008 Standard Specification for Vermiculite Loose Fill Thermal Insulation
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
MIL-DTL-24688 Revision A:2011 INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM
ASTM C 195 : 2007 : R2019 Standard Specification for Mineral Fiber Thermal Insulating Cement
MIL-PRF-2819 Revision H:2013 INSULATION BLOCK, THERMAL
ASTM C 1086 : 2009 : R2016 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
SAE J 1324 : 2016 ACOUSTICAL AND THERMAL MATERIALS TEST PROCEDURE
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ASTM C 1044 : 2016 : REDLINE Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
SAE AMS 7510C:2006(S2017) Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product
ASTM D 4060 : 2014 : REDLINE Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM C 1373/C1373M : 2011 : R2017 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
ASTM C 1676 : 2008 Standard Specification for Microporous Thermal Insulation
ASTM C 449 : 2007 : R2019 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
ASTM C 1470 : 2006 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
ASTM D 6744 : 2006 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM C 449 : 2007 : R2013 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
ASTM E 2816 : 2018 : REDLINE Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
ASTM C 549 : 2006 : R2012 Standard Specification for Perlite Loose Fill Insulation
ASTM E 1530 : 2011 : R2016 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
ASTM D 6744 : 2006 : R2011 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM F 433 : 2002 : R2014 : EDT 1 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM F 433 : 2002 : R2009 Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
NBR 15575-1 : 2013 RESIDENTIAL BUILDINGS - PERFORMANCE - PART 1: GENERAL REQUIREMENTS

ISO 8301:1991 Thermal insulation Determination of steady-state thermal resistance and related properties Heat flow meter apparatus
ASTM C 168 : 2017-06 TERMINOLOGY RELATING TO THERMAL INSULATION

View more information
£70.87
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.