• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 148-1:2016

Current
Current

The latest, up-to-date edition.

Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
Published date

23-11-2016

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Principles of the test
6 Test pieces
7 Test equipment
8 Test procedure
9 Test report
Annex A (informative) - Self-centring tongs
Annex B (informative) - Lateral expansion
Annex C (informative) - Fracture appearance
Annex D (informative) - Absorbed energy vs. temperature
        curve and the transition temperature
Annex E (informative) - Measurement uncertainty of an
        absorbed energy value, K
Bibliography

ISO 148-1:2016 specifies the Charpy (V-notch and U-notch) pendulum impact test method for determining the energy absorbed in an impact test of metallic materials. This part of ISO 148 does not cover instrumented impact testing, which is specified in ISO 14556.Annexes B and C are based on ASTM E23 and are used with the permission of ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959, USA.

Committee
CEN/TC 459/SC 1
DevelopmentNote
Supersedes EN 10045-1. (11/2010)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

17/30346738 DC : 0 BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS
PREN 12493 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
PREN 10207 : DRAFT 2015 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
15/30317351 DC : 0 BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
16/30332611 DC : DRAFT JAN 2016 BS EN 10219-1 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
BS EN 16767:2016 Industrial valves. Steel and cast iron check valves
11/30254168 DC : 0 BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 15551 E : 2011 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
UNE-EN 16767:2017 Industrial valves - Steel and cast iron check valves
16/30322067 DC : 0 BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
BS EN 1562:2012 Founding. Malleable cast irons
14/30301577 DC : 0 BS EN 16767 - INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
PREN 10225-4 : DRAFT 2017 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
BS EN 1563:2011 Founding. Spheroidal graphite cast irons
PREN 50405 : DRAFT 2014 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS
VDMA 24408 : DRAFT 2015 LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE
PREN 14276-2 : DRAFT 2017 PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
I.S. EN 1563:2011 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
17/30346735 DC : 0 BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS
PREN 10028-1 : DRAFT 2014 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
16/30332605 DC : 0 BS EN 10210-1 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
EN 13001-3-6:2018 Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
I.S. EN 10216-2:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 13480-2:2017 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
BS EN 13480-8:2017 Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 13480-2:2017 Metallic industrial piping Materials
BS EN 13480-8:2017+A1:2019 Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping
BS EN 10216-2:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties
DIN EN 12952-6:2011-10 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
DIN EN 14359 E : 2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
BS EN 14141:2013 Valves for natural gas transportation in pipelines. Performance requirements and tests
BS EN 13835:2012 Founding. Austenitic cast irons
UNE-EN 10272:2016 Stainless steel bars for pressure purposes
BS EN 10088-2:2014 Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
BS EN 10272:2007 Stainless steel bars for pressure purposes
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
DIN EN 12493:2017-01 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
DIN EN 1562:2012-05 FOUNDING - MALLEABLE CAST IRONS
I.S. EN 10216-4:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
I.S. EN 10222-1:2017 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS FOR OPEN DIE FORGINGS
I.S. EN 14870-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
EN 12952-2:2011 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
EN 12952-5:2011 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
CEN/TS 15718:2011 Railway applications - Wheelsets and bogies - Product requirements for cast wheels
EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
EN 10088-3:2014 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10272:2016 Stainless steel bars for pressure purposes
EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
EN 10207:2017 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars
EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
DIN EN 16767 E : 2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
BS EN 16451:2015 Railway applications. Braking. Brake pad holder
13/30277434 DC : 0 BS EN 14399-4 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
EN 10217-7:2014 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
DIN EN 16451:2015-09 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNI EN 1562 : 2012 FOUNDING - MALLEABLE CAST IRONS
UNE-EN 1563:2012 Founding - Spheroidal graphite cast irons
12/30270633 DC : 0 BS EN 10222-1 - STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
DIN EN 15551:2013-05 (Draft) RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
11/30253751 DC : 0 BS EN 10269 - STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
PREN 10219-1 : DRAFT 2016 COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
EN 4700-002:2016 Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section
UNI EN 10217-7 : 2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
PREN 10253-4 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
PREN 10088-2 : DRAFT 2011 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DD CEN/TS 15718:2011 Railway applications. Wheelsets and bogies. Product requirements for cast wheels
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
PREN 10210-1 : DRAFT 2016 HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 1: GENERAL
DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
PREN 764-4 : DRAFT 2012 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
PREN 10272 : DRAFT 2013 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
UNE-EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.)
15/30322070 DC : 0 BS EN 1563 - FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
17/30346741 DC : 0 BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
UNI EN 1563 : 2012 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 12952-6:2012 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
I.S. EN 14460:2018 EXPLOSION RESISTANT EQUIPMENT
DIN EN 10216-5:2014-03 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
I.S. EN 1562:2012 FOUNDING - MALLEABLE CAST IRONS
DIN EN 12252:2014-07 LPG equipment and accessories - Equipping of LPG road tankers
DIN EN 13796-1 E : 2006 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
DIN EN 1559-1:2011-05 Founding - Technical conditions of delivery - Part 1: General
DIN EN 10269:2014-02 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
DIN EN 10216-2:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
BS EN 10216-4:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties
BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
UNE-EN 14141:2014 Valves for natural gas transportation in pipelines - Performance requirements and tests
DIN EN 1559-2:2014-12 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 10216-1:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
I.S. EN 10273:2016 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
I.S. EN 10216-3:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
I.S. EN 13796-1:2017 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
DIN EN 10028-1:2017-10 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 10216-5:2013 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
I.S. EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 10217-7:2014 WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES
I.S. EN 12952-6:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 13835:2012 FOUNDING - AUSTENITIC CAST IRONS
DIN EN 10088-2:2014-12 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
DIN EN 13796-1:2006-01 SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
I.S. EN 1559-1:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN 10149-1:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
I.S. EN 10269:2013 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
I.S. EN 12952-2:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
I.S. EN 1559-2:2014 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
DIN EN 12252:2000-10 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 14141:2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
I.S. EN 10272:2016&LC:2016 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
I.S. EN 13480-8:2017&LC:2019 METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING
I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
I.S. EN 10088-3:2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
I.S. EN 12252:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
I.S. EN 12952-5:2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
DIN EN 10088-3:2014-12 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
I.S. EN 764-4:2014 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
I.S. EN 10028-1:2017 FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
I.S. EN 1564:2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS
I.S. EN 14359:2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
UNI EN 14870-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
UNI EN 12493 : 2014 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
NF EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
NF EN 13835 : 2012 FOUNDING - AUSTENITIC CAST IRONS
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
DIN EN 1563:2015-07 (Draft) FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
PREN 13766 : DRAFT 2016 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
12/30260023 DC : 0 BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 12493 : 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
12/30259070 DC : 0 BS EN 764-4 - PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
13/30277431 DC : 0 BS EN 14399-3 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
13/30266592 DC : 0 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
I.S. EN 50405:2015 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
BS EN 4700-002:2016 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section
16/30330752 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
UNI EN 10216-5 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES
13/30247837 DC : 0 BS EN 13094 - TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
13/30288572 DC : 0 BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES
13/30288575 DC : 0 BS EN 10273 - HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
16/30322061 DC : DRAFT MAR 2016 BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
PREN 10222-1 : DRAFT 2012 STEEL FORGINGS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
PREN 14399-3 : DRAFT 2013 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
UNE-EN 50405:2016 Railway applications - Current collection systems - Pantographs, testing methods for contact strips
BS EN 50405 : 2015 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
I.S. EN 16767:2016 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
EN 1563:2011 Founding - Spheroidal graphite cast irons
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
PREN 14359 : DRAFT 2014 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
EN 1562:2012 Founding - Malleable cast irons
PREN 13480-8 : DRAFT 2012 METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS
17/30347070 DC : 0 BS EN 10340-2 - STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
PREN 15566 : DRAFT 2013 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
PREN 1559-2 : DRAFT 2012 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
PREN 13001-3-4 : DRAFT 2016 CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS
UNE-EN 12952-5:2012 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
DIN EN 1564:2012-01 Founding - Ausferritic spheroidal graphite cast irons
I.S. EN 1092-1:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
UNE-EN 14359:2017 Gas-loaded accumulators for fluid power applications
UNE-EN 10088-2:2015 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10216-3:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
DIN EN 14141:2013-08 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
DIN EN 14359:2011-04 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
UNI EN 10216-2 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
UNE-EN 10216-2:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 10217-7:2014 Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
UNE-EN 764-4:2015 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
UNE-EN 10088-3:2015 Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 10216-4:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
UNE-EN 1564:2012 Founding - Ausferritic spheroidal graphite cast irons
EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
I.S. EN 13094:2015 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
UNI EN 10088-3 : 2014 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10269 : 2013 Nickel steels and alloys for fasteners with specific properties at high and / or low temperatures
UNI EN 12952-5 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER
UNI EN 13835 : 2012 FOUNDING - AUSTENITIC CAST IRONS
EN 1559-2:2014 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
UNI EN 12952-2 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 2: MATERIALS FOR PRESSURE PARTS OF BOILERS AND ACCESSORIES
UNI EN 1559-2 : 2014 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNI EN 1559-1 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
UNI EN 1564 : 2011 FOUNDING - AUSFERRITIC SPHEROIDAL GRAFITE CAST IRONS
UNI EN 14141 : 2013 VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS
UNI EN 10216-4 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
UNI EN 10216-1 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
EN 14870-1:2011 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
UNI EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
UNI EN 10216-3 : 2014 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES
UNI EN 12952-6 : 2011 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER
UNI EN 10149-1 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI EN 12252 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
DIN EN 10149-1:2013-12 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
UNI CEN/TS 15718 : 2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
14/30279136 DC : 0 BS EN 50405 - RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CARBON CONTACT STRIPS
17/30347067 DC : 0 BS EN 10340-1 - STEEL CASTINGS FOR STRUCTURAL USES - PART 1: GENERAL
EN 10216-5:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
16/30336440 DC : DRAFT MAR 2016 BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
13/30281067 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
12/30266615 DC : 0 BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
14/30274238 DC : 0 BS EN 14359 - GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
13/30241415 DC : 0 BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING
15/30331863 DC : 0 BS EN ISO 10855-2 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
PREN 12972 : DRAFT 2017 TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
16/30322064 DC : DRAFT MAR 2016 BS EN 13001-3-6 - CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS
I.S. EN 13001-3-6:2018 CRANES - GENERAL DESIGN - PART 3-6: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - HYDRAULIC CYLINDERS
I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
I.S. EN 10207:2017 STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
PREN 10269 : DRAFT 2011 STEELS AND NICKEL ALLOYS FOR FASTENERS WITH SPECIFIED ELEVATED AND/OR LOW TEMPERATURE PROPERTIES
EN 14460:2018 Explosion resistant equipment
EN 1092-1:2018 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
PREN 10273 : DRAFT 2013 HOT ROLLED WELDABLE STEEL BARS FOR PRESSURE PURPOSES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES
17/30360691 DC : 0 BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS
BS EN 10207:2017 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN 1562:2012 Founding - Malleable cast irons
DIN EN 12493:2014-03 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
17/30351221 DC : 0 BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASTM F 3122 : 2014 Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
PREN 14893 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
PREN 10340-2 : DRAFT 2017 STEEL CASTINGS FOR STRUCTURAL USES - PART 2: TECHNICAL DELIVERY CONDITIONS
EN 10216-2:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
BS EN 13480-2:2017+A3:2018 Metallic industrial piping Materials
DIN EN 13094:2015-07 TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - METALLIC TANKS WITH A WORKING PRESSURE NOT EXCEEDING 0,5 BAR - DESIGN AND CONSTRUCTION
DIN EN 10216-4:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES
DIN EN 10217-7:2015-01 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
DIN EN 10272:2016-10 STAINLESS STEEL BARS FOR PRESSURE PURPOSES
BS EN 1564:2011 Founding. Ausferritic spheroidal graphite cast irons
BS EN 1559-2:2014 Founding. Technical conditions of delivery Additional requirements for steel castings
BS EN 10216-5:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes
EN 16767:2016 Industrial valves - Steel and cast iron check valves
BS EN 14359:2017 Gas-loaded accumulators for fluid power applications
UNE-EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
BS EN 10216-3:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes
UNE-EN 12952-2:2012 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
BS EN 12952-5:2011 Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler
BS EN 764-4:2014 Pressure equipment Establishment of technical delivery conditions for metallic materials
BS EN 13796-1:2005 Safety requirements for cableway installations designed to carry persons. Carriers Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
BS EN 10088-3:2014 Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
UNE-EN 10269:2014 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
UNE-EN 13835:2012 Founding - Austenitic cast irons
BS EN 12952-6:2011 Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler
UNE-EN 13094:2015 Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction
EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
UNE-EN 10216-3:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
UNE-EN 10028-1:2017 Flat products made of steels for pressure purposes - Part 1: General requirements
UNE-EN 10149-1:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General technical delivery conditions
UNE-EN 10216-5:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
UNE-EN 10216-1:2014 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
BS EN 14870-1:2011 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends
DIN EN 13796-1:2012-06 (Draft) SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOW-HANGERS
BS EN 10149-1:2013 Hot rolled flat products made of high yield strength steels for cold forming General technical delivery conditions
DIN EN 13835:2012-04 FOUNDING - AUSTENITIC CAST IRONS
EN 14359:2017 Gas-loaded accumulators for fluid power applications
EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
EN 13835:2012 Founding - Austenitic cast irons
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 1564:2011 Founding - Ausferritic spheroidal graphite cast irons
EN 16451:2015 Railway applications - Braking - Brake pad holder
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 14141:2013 Valves for natural gas transportation in pipelines - Performance requirements and tests
EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
EN 13480-8:2017 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
PREN 10253-2 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
PREN 12252 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
PREN 14399-4 : DRAFT 2013 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
PREN 1563 : DRAFT 2015 FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS
14/30312182 DC : 0 BS EN 10028-1 - FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS
PREN 10088-3 : DRAFT 2011 STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
11/30254171 DC : 0 BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
15/30331537 DC : 0 BS EN 10207 - STEELS FOR SIMPLE PRESSURE VESSELS - TECHNICAL DELIVERY REQUIREMENTS FOR PLATES, STRIPS AND BARS
DIN EN 16451 E : 2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
DIN EN 16767:2016-08 INDUSTRIAL VALVES - STEEL AND CAST IRON CHECK VALVES
BS EN 13001-3-5:2016 Cranes. General design Limit states and proof of competence of forged hooks
I.S. EN 4700-002:2016 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
S.R. CEN/TS 15718:2011 RAILWAY APPLICATIONS - WHEELSETS AND BOGIES - PRODUCT REQUIREMENTS FOR CAST WHEELS
PREN 4700-002 : 200P3 AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION
I.S. EN 16451:2015 RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER
UNE-EN 12493:2014 LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
I.S. EN 12493:2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
17/30353548 DC : 0 BS EN 10277 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS
17/30346732 DC : 0 BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 12493:2013+A1:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
DIN EN 764-4:2015-03 PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
DIN EN 12952-2:2011-10 Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of boilers and accessories
DIN EN 12952-5:2012-01 Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler
DIN EN 10216-1:2014-03 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES
BS EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
BS EN 10216-1:2013 Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties
UNE-EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
UNE-EN 10222-1:2017 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
BS EN 12952-2:2011 Water-tube boilers and auxiliary installations Materials for pressure parts of boilers and accessories
BS EN 10222-1:2017 Steel forgings for pressure purposes General requirements for open die forgings
BS EN 10028-1:2017 Flat products made of steels for pressure purposes General requirements
BS EN 10273:2016 Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
BS EN 13094:2015 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
EN 10216-4:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
EN 12252:2014 LPG equipment and accessories - Equipping of LPG road tankers
EN 12952-6:2011 Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
EN 10216-3:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
DIN EN 14359:2017-09 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
EN 50405 : 2015 AMD 1 2016 RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - PANTOGRAPHS, TESTING METHODS FOR CONTACT STRIPS
UNE-EN 13480-2:2017 Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)

ISO 14556:2015 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 148-2:2016 Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines
ISO 286-1:2010 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
ISO 148-3:2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 3785:2006 Metallic materials — Designation of test specimen axes in relation to product texture
ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.