EN ISO 9692-1:2013
|
Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2013)
|
EN 444:1994
|
Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
|
ASTM E 446 : 2015 : REDLINE
|
Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
|
ASTM E 186 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
|
EN 10213:2007+A1:2016
|
Steel castings for pressure purposes
|
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
|
EN 1759-1:2004
|
Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
|
EN 12680-1:2003
|
Founding - Ultrasonic examination - Part 1: Steel castings for general purposes
|
EN 736-2:2016
|
Valves - Terminology - Part 2: Definition of components of valves
|
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
|
EN 10228-1:1999
|
Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
|
PREN 12516-2 : DRAFT 2011
|
INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 2: CALCULATION METHOD FOR STEEL VALVE SHELLS
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels
|
ISO 9692-1:2013
|
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels
|
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
|
EN 10222-3:2017
|
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
|
EN 10222-5:2017
|
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
|
EN 10228-3:2016
|
Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings
|
EN 12516-3:2002/AC:2003
|
VALVES - SHELL DESIGN STRENGTH - PART 3: EXPERIMENTAL METHOD
|
ISO 4200:1991
|
Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length
|
EN 10222-4:2017
|
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
|
EN 10222-2:2017
|
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
|
EN 10204:2004
|
Metallic products - Types of inspection documents
|
EN 584-1:2006
|
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
|
EN 1369:2012
|
Founding - Magnetic particle testing
|
EN 462-1:1994
|
Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
|
ASTM E 280 : 2015 : REDLINE
|
Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
|
EN 12681 : 2003
|
FOUNDING - RADIOGRAPHIC EXAMINATION
|
EN 12517-1:2006
|
Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
|
EN 12517-2:2008
|
Non-destructive testing of welds - Part 2: Evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels
|
ISO 7005-1:2011
|
Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
|
EN 12760:2016
|
Industrial valves - Socket welding ends for steel valves
|
EN 571-1:1997
|
Non destructive testing - Penetrant testing - Part 1: General principles
|
EN 10028-4:2017
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
|
EN 19:2016
|
Industrial valves - Marking of metallic valves
|
EN 736-3:2008
|
Valves - Terminology - Part 3: Definition of terms
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
EN 287-1:2011
|
Qualification test of welders - Fusion welding - Part 1: Steels
|