• There are no items in your cart

16/30338114 DC : 0

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS

Available format(s)

Hardcopy , PDF

Superseded date

04-12-2018

Language(s)

English

European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Required characteristics and corresponding
  methods of test
5 Assessment and verification of constancy
  of performance (AVCP)
Annex A (normative) - Durability of geosynthetic
        barriers
Annex ZA (informative) - Relationship of this
         European Standard with Regulation (EU) No. 305/2011
Bibliography

BS EN 13361.

Committee
B/553
DocumentType
Draft
Pages
54
PublisherName
British Standards Institution
Status
Superseded
SupersededBy

Standards Relationship
PREN 13361 : DRAFT 2016 Identical

EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
EN 14576:2005 Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
EN ISO 11358-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014)
EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
EN 12226:2012 Geosynthetics - General tests for evaluation following durability testing
EN ISO 1183-3 : 1999 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD
EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids
ISO 13438:2004 Geotextiles and geotextile-related products Screening test method for determining the resistance to oxidation
EN ISO 10319:2015 Geosynthetics - Wide-width tensile test (ISO 10319:2015)
ISO 527-4:1997 Plastics Determination of tensile properties Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
EN 806-1:2000/A1:2001 SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL
CEN/TS 14418:2014 Geosynthetic Barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers
ASTM D 6141 : 2014-07 GUIDE FOR SCREENING CLAY PORTION AND INDEX FLUX OF GEOSYNTHETIC CLAY LINER (GCL) FOR CHEMICAL COMPATIBILITY TO LIQUIDS
EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
EN ISO 13426-2:2005 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005)
EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
ISO 12236:2006 Geosynthetics — Static puncture test (CBR test)
EN 1849-2:2009 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
EN ISO 527-4:1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
ISO 1133-1:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
EN 495-5:2013 Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
ISO 9863-1:2016 Geosynthetics Determination of thickness at specified pressures Part 1: Single layers
EN ISO 13426-1 : 2003 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - STRENGTH OF INTERNAL STRUCTURAL JUNCTIONS - PART 1: GEOCELLS
ISO 6427:2013 Plastics — Determination of matter extractable by organic solvents (conventional methods)
EN 14151:2010 Geosynthetics - Determination of burst strength
EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
ISO 10319:2015 Geosynthetics — Wide-width tensile test
EN ISO 6427:2014 Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013)
EN 764-1:2015+A1:2016 Pressure equipment - Part 1: Vocabulary
EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
EN 12224 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING
EN ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
ISO 34-1:2015 Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces
EN 12311-2:2013 Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing
EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
ISO 13426-2:2005 Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites
EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
EN 12311-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties
ISO/TS 13434:2008 Geosynthetics Guidelines for the assessment of durability
EN 1844:2013 Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing
EN 12310-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank)
EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
EN 14414 : 2004 GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS
ISO 12957-1:2005 Geosynthetics Determination of friction characteristics Part 1: Direct shear test
ASTM D 1603 : 2014 : REDLINE Standard Test Method for Carbon Black Content in Olefin Plastics
EN 16416:2013 Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
EN 1109:2013 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
CEN/TS 14417:2014 Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers
EN ISO 10318-1:2015 Geosynthetics - Part 1: Terms and definitions (ISO 10318-1:2015)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
ASTM D 696 : 2016 : REDLINE Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer
EN ISO 12957-2:2005 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005)
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN ISO 16994:2016 Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016)
ISO 13426-1:2003 Geotextiles and geotextile-related products Strength of internal structural junctions Part 1: Geocells
ISO 12957-2:2005 Geosynthetics — Determination of friction characteristics — Part 2: Inclined plane test
ISO 1183-1:2012 Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
ISO 11358-1:2014 Plastics Thermogravimetry (TG) of polymers Part 1: General principles
EN 12225 : 2000 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - METHOD FOR DETERMINING THE MICROBIOLOGICAL RESISTANCE BY A SOIL BURIAL TEST
EN 14196:2016 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers
EN 1296:2000 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature
ISO 1183-2:2004 Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
ISO 1183-3:1999 Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method
EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)
EN ISO 9863-1:2016 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2016)
ISO 9001:2015 Quality management systems — Requirements
ISO 11357-6:2008 Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 10390:2005 Soil quality Determination of pH
ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods (ISO 3696:1987)
EN 1849-1:1999 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
ISO 1133-2:2011 Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 2: Method for materials sensitive to time-temperature history and/or moisture
EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006)
EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
ISO 9864:2005 Geosynthetics — Test method for the determination of mass per unit area of geotextiles and geotextile-related products
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
CEN/TS 14416:2014 Geosynthetic barriers - Test method for determining the resistance to roots
EN 14415:2004 Geosynthetic barriers - Test method for determining the resistance to leaching
ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
EN ISO 1183-2:2004 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 2: DENSITY GRADIENT COLUMN METHOD

View more information
US$23.42
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.