98/232755 DC : DRAFT DEC 1998
Withdrawn
Withdrawn
IEC 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES
Published date
11-23-2012
Publisher
Withdrawn date
01-03-2016
Sorry this product is not available in your region.
IEC 61936-1
| Committee |
PEL/99
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| HD 367 : 200S2 | ON-LOAD TAP-CHANGERS |
| IEC 60038:2009 | IEC standard voltages |
| IEC 60255-3:1989 | Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time |
| IEC 60826:2017 | Design criteria of overhead transmission lines |
| IEC 60986:2000+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages from 6 kV (<em>U</em><sub>m</sub> = 7,2 kV) up to 30 kV (<em>U</em><sub>m</sub> = 36 kV) |
| HD 464 : S1 AMD 5 2002 | DRY-TYPE POWER TRANSFORMERS |
| IEC 60724:2000+AMD1:2008 CSV | Short-circuit temperature limits of electric cables with rated voltages of 1 kV (<em>U</em><sub>m</sub> = 1,2 kV) and 3 kV (<em>U</em><sub>m</sub> = 3,6 kV) |
| HD 405.1 : S1 AMD 1 | TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - TEST ON A SINGLE VERTICAL INSULATED WIRE OR CABLE |
| IEC 60502:1994 | Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV |
| HD 448 : 200S4 | COMMON CLAUSES FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| HD 597 S1:1992/corrigendum:1992 | COUPLING CAPACITORS AND CAPACITOR DIVIDERS |
| IEC 60214:1989 | On-load tap-changers |
| HD 481.1 : 200S1 | ELECTROMAGNETIC COMPATIBILITY FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT - GENERAL INTRODUCTION |
| IEC 60478-1:1974 | Stabilized power supplies, d.c. output. Part 1: Terms and definitions |
| HD 620 : 2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV |
| HD 405.2 : 200S1 | TESTS ON ELECTRIC CABLES UNDER FIRE CONDITIONS - TEST ON A SINGLE SMALL VERTICAL INSULATED COPPER WIRE OR CABLE |
| IEC 60949:1988 | Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects |
| HD 364 : 200S2 | HIGH-VOLTAGE CABLE PLUG AND SOCKET CONNECTIONS FOR MEDICAL X-RAY EQUIPMENT |
| IEC 60470:1999 | High-voltage alternating current contactors and contactor-based motor-starters |
| IEC 60056:1987 | High-voltage alternating-current circuit-breakers |
| IEC 60353:1989 | Line traps for a.c. power systems |
| HD 398.1 : 200S1 | POWER TRANSFORMERS - GENERAL |
| HD 478.2.1 : 200S1 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - TEMPERATURE AND HUMIDITY |
| IEC 60376:2005 | Specification of technical grade sulfur hexafluoride (SF<sub>6</sub>) for use in electrical equipment |
| HD 588.1 : S1 AMD 1 | HIGH VOLTAGE TEST TECHNIQUES - GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 60044-3:2002 | Instrument transformers - Part 3: Combined transformers |
| IEC 60354:1991 | Loading guide for oil-immersed power transformers |
| HD 472 S1:1989/AC:2013 | NOMINAL VOLTAGES FOR LOW-VOLTAGE PUBLIC ELECTRICITY SUPPLY SYSTEMS |
| HD 187 : 200S5 | A.C METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV |
| IEC 60517:1990 | Gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| HD 506 : S1 AMD 1 | |
| IEC 60721-2-1:2013 | Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| HD 358 : 200S3 | GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES OF 72.5 kV AND ABOVE |
| IEC TR 60865-2:2015 | Short-circuit currents - Calculation of effects - Part 2: Examples of calculation |
| IEC 60044-6:1992 | Instrument transformers - Part 6: Requirements for protective current transformers for transient performance |
| IEC 61330:1995 | High-voltage/low voltage prefabricated substations |
| IEC 60801-1:1984 | Electromagnetic compatibility for industrial-process measurement and control equipment. Part 1: General introduction |
| IEC 60291:1969 | Fuse definitions |
| IEC 60076:1967 | Power transformers |
| IEC 60940:2015 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression |
| IEC 60273:1990 | Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V |
| IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
| HD 348 : 200S7 | HIGH-VOLTAGE ALTERNATING-CURRENT CIRCUIT-BREAKERS |
| IEC 60478-2:1986 | Stabilized power supplies, d.c. output. Part 2: Rating and performance |
| HD 355.1 : 200S3 | HIGH VOLTAGE SWITCHES - HIGH-VOLTAGE SWITCHES FOR RATED VOLTAGES ABOVE 1 KV AND LESS THAN 52 KV |
| IEC 60909:1988 | Short-circuit current calculation in three-phase a.c. systems |
| IEC 60905:1987 | Loading guide for dry-type power transformers |
| IEC 60071-2:1996 | Insulation co-ordination - Part 2: Application guide |
| IEC 60186:1987 | Voltage transformers |
| HD 602 : 200S1 | TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY |
| HD 405.3 : 200S1 | TESTS OF ELECTRIC CABLES UNDER FIRE CONDITIONS - TESTS ON BUNCHED WIRES OR CABLES |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60331:1970 | Fire-resisting characteristics of electric cables |
| HD 604 S1:1994/A3:2005 | 0.6/1 KV POWER CABLES WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
| HD 548.3 : 200S1 | INSTRUMENT TRANSFORMERS - COMBINED TRANSFORMERS |
| IEC 60089:1957 | Recommendations for the characteristics of audio-apparatus to be specified for application purposes |
| IEC 60298:1990 | A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| HD 246.2 : 200S1 | DIAGRAMS, CHARTS, TABLES - ITEM DESIGNATION |
| HD 621 S1:1996/A1:2001 | MV IMPREGNATED PAPER INSULATED DISTRIBUTION CABLES OF RATED VOLTAGES OF 3.8/6.6 KV TO 19/33 KV |
| HD 533 : 200S1 | SHORT-CIRCUIT CALCULATION IN THREE-PHASE A.C. SYSTEMS |
Summarise
Sorry this product is not available in your region.