• There are no items in your cart

AS 3750.10-2008 (R2019)

Current
Current

The latest, up-to-date edition.

Paints for steel structures Full gloss epoxy (two-pack)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

05-19-2008

Preview

Specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment.

RECONFIRMATION NOTICE
Technical Committee CH-003 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 26 August 2019.
The following are represented on Technical Committee CH-003:
Australasian Corrosion Association
Australian Institute of Building
Australian Paint Manufacturers Federation
Australian Wall and Ceiling Association
Engineering New Zealand
Master Painters Australia
Master Painters New Zealand Association
National Association of Testing Authorities Australia
National Painting and Decorating Institute
Surface Coatings Association Australia

This Standard specifies requirements for a two-component, full gloss epoxy paint for the protection of iron and steel against exterior atmospheric corrosion in a severe industrial or coastal marine environment. It is suitable for application by brush, roller or spray. Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference C24.This paint is intended for use as a topcoat in paint systems for the protection of iron and steel against corrosion involving wet and damp areas, high humidity, coastal/marine and industrial fallout.NOTES;1 This paint may be used as detailed for systems EPF1in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy paints is contained in Appendix B.4 The paint is available in a range of colours.5 Full gloss epoxy paints should not be used as a finish coat in exterior applications where retention of colour and gloss is required for long periods of time.

Committee
CH-003
DocumentType
Standard
ISBN
0-7337-8663-4
Pages
25
ProductNote
Reconfirmed 15/11/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand. Reconfirmation Notice 15/11/2019
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS 2603-1983.
Revised and redesignated as Joint Standard AS/NZS 3750.10:1994.
Revised and redesignated as AS 3750.10-2008.
Reconfirmed 2019.

AS 1580.105.1-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS/NZS 1580.481.1.8:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS/NZS 1580.204.1:1998 Paints and related materials - Methods of test Fineness of grind (Reconfirmed 2013)
AS 1580.401.5-2002 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS/NZS 1580.481.1.6:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of erosion (Reconfirmed 2013)
AS 1580.108.2-2004 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019)
AS/NZS 1580.403.1:1999 Paints and related materials - Methods of test Scratch resistance (Reconfirmed 2013)
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS/NZS 3750.13:1997 Paints for steel structures Epoxy primer (two-pack)
AS/NZS 1580.481.1.9:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering (Reconfirmed 2013)
AS/NZS 1580.481.1.7:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking (Reconfirmed 2013)
AS 2700-1996 Colour Standards for general purposes - Swatches
AS/NZS 1580.401.1:1999 Paints and related materials - Methods of test Surface dry condition (Reconfirmed 2013)
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 3530-1988 Solvents - Mineral turpentine and white spirit
AS/NZS 1580.214.5:1997 Paints and related materials - Methods of test Consistency - Rotational viscometer (Reconfirmed 2013)
AS 1580.481.3-2002 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates (Reconfirmed 2013)
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 1627.4-2005 Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017)
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 1580.408.2-2004 Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
AS 2905-2005 Steel drums
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
AS/NZS 1580.481.1.10:1998 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling (Reconfirmed 2013)
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS/NZS 1580.205.1:1997 Paints and related materials - Methods of test Application properties - Brushing (Reconfirmed 2013)
AS 1580.603.1-2002 Paints and related materials - Methods of test Finish - General appearance (Reconfirmed 2013)
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 1580.0-2004 Paints and related materials - Methods of test Introduction and list of methods
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 1580.402.1-2003 Paints and related materials - Methods of test Bend test
AS/NZS 1580.101.5:1999 Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013)
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.205.3:1997 Paints and related materials - Methods of test Application properties - Roller coating (Reconfirmed 2013)
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)
AS/NZS 1580.404.1:1997 Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013)
AS 1580.454.1-2002 Paints and related materials - Methods of test Resistance to mineral oil and other organic liquids

AS/NZS 2311:2009 Guide to the painting of buildings

View more information
US$66.67
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.