• There are no items in your cart

AS/NZS 3750.13:1997

Current
Current

The latest, up-to-date edition.

Paints for steel structures Epoxy primer (two-pack)
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

11-05-1997

Preview

1 - AS/NZS 3750.13:1997 PAINTS FOR STEEL STRUCTURES - EPOXY PRIMER (TWO-PACK)
4 - PREFACE
5 - CONTENTS
6 - SECTION 1 SCOPE AN D GENERAL
6 - 1.1 SCOPE
6 - 1.2 REFERENCED DOCUMENTS
6 - 1.3 DEFINITIONS
6 - 1.3.1 Component
6 - 1.3.2 Epoxy primer
6 - 1.3.3 Type 1 primer
6 - 1.3.4 Type 2 primer
6 - 1.3.5 Type 3 primer
6 - 1.4 SAFETY PRECAUTIONS
7 - SECTION 2 MATERIAL REQUIREMENTS
7 - 2.1 GENERAL
7 - 2.2 CONDITIONS OF TEST
7 - 2.3 LIQUID PAINT
7 - 2.3.1 Condition in container
7 - 2.3.2 Volume solids
7 - 2.3.3 Consistency
7 - 2.3.4 Storage properties
7 - 2.4 APPLICATION PROPERTIES
7 - 2.4.1 General
7 - 2.4.2 Brushing
8 - 2.4.3 Rolling
8 - 2.4.4 Spraying
8 - 2.4.5 Pot-life assessment
8 - 2.5 APPLIED FILM
8 - 2.5.1 Surface-dry time
8 - 2.5.2 Hard-dry time
8 - 2.5.3 Curing properties
8 - 2.5.4 Finish
8 - 2.5.5 Flexibility and adhesion
8 - 2.5.6 Adhesion test (Type 3 only)
8 - 2.5.7 Resistance to natural weathering
11 - SECTION 3 PACKAGING AND LABELLING
11 - 3.1 MIXING RATIO
11 - 3.2 PACKAGING
11 - 3.3 LABELLING
12 - APPENDIX A - PURCHASING GUIDELINES
12 - A1 GENERAL
12 - A2 INFORMATION TO BE SUPPLIED WITH THE ENQUIRY OR ORDER
13 - APPENDIX B - GUIDANCE ON THE USE AND APPLICATION OF A TWO-PACK EPOXY PRIMER
13 - B1 SCOPE
13 - B2 MANUFACTURER’S TECHNICAL DATA
13 - B3 SAFETY PRECAUTIONS
13 - B4 TYPICAL USES
13 - B5 MIXING PROCEDURE
14 - B6 CURING CONDITIONS
14 - B7 POT-LIFE
14 - B8 TYPICAL FILM THICKNESS
14 - B9 RECOATING
14 - B10 STORAGE CONDITIONS
15 - APPENDIX C - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
15 - C1 SCOPE
15 - C2 STATISTICAL SAMPLING
15 - C3 PRODUCT CERTIFICATION
15 - C4 SUPPLIER’S QUALITY SYSTEM
16 - C5 OTHER MEANS OF ASSESSMENT
17 - APPENDIX D - REFERENCED DOCUMENTS
19 - APPENDIX E - PREPARATION OF TEST PANELS
19 - E1 SCOPE
19 - E2 TEST PANEL MATERIAL
19 - E2.1 Tinplate
19 - E2.2 Steel
19 - E2.3 Galvanized steel
19 - E3 PREPARATION
19 - E3.1 Tinplate
19 - E3.2 Steel
19 - E3.3 Galvanized steel
20 - APPENDIX F - DETERMINATION OF THE CURING PROPERTIES OF EPOXY PRIMER
20 - F1 SCOPE
20 - F2 PRINCIPLE
20 - F3 REAGENT
20 - F4 APPARATUS
20 - F4.1 Cotton wool
20 - F4.2 Scratch-resistance equipment
20 - F4.3 Watch glass
20 - F5 TEST PANEL
20 - F6 PROCEDURE
20 - F7 TEST REPORT
21 - APPENDIX G - PROCEDURE FOR TESTING THE RESISTANCE OF EPOXY PRIMER TO WEATHERING
21 - G1 SCOPE
21 - G2 PRINCIPLE
21 - G3 APPARATUS
21 - G3.1 Exposure rack
21 - G3.2 Microscope or magnifying device
21 - G3.3 Reference standards
21 - G4 PROCEDURE
21 - G5 REPORT

Provides requirements for two-component epoxy primers for the protection of iron and steel and galvanized iron and steel against atmospheric corrosion in an industrial or marine environment.

This Standard specifies requirements for two-component, epoxy primers for the protection of iron and steel and galvanized iron and steel against atmospheric corrosion in an industrial or marine environment. It is suitable for application by conventional air or airless spraying and may also be applied by roller or brush. Paint specified in this Standard is described in AS/NZS 2312 as Paint Reference 6.This paint is intended for use as a primer in paint systems for the protection of iron and steel and galvanized iron and steel against corrosion involving wet and damp areas, high humidity, marine applications or industrial fallout.NOTES:1 This paint may be used as detailed for systems MP5 - I-L, MP6 -A-D, MP9 -C, MP10 -C, LP1- I and GZLP - F-I in AS/NZS 2312.2 Appendix A contains recommendations and advice on information which should be provided by the purchaser at the time of enquiry or order.3 Additional information on the use and application of epoxy primer is contained in Appendix B.4 Alternative methods for determining compliance with this Standard are contained in Appendix C.

Committee
CH/3
DocumentType
Standard
ISBN
0 7337 1330 0
Pages
16
ProductNote
PublisherName
Standards Australia
Status
Current
Supersedes

First published in Australia as AS 2674-1983.Jointly revised and redesignated AS/NZS 3750.13:1997.Reconfirmed 2013. Originated in Australia as AS 2674-1983. Jointly revised and redesignated AS/NZS 3750.13:1997.

AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS 1580.205.4-1981 Paints and related materials - Methods of test Application properties - Airless spraying
AS 1580.205.2-1981 Paints and related materials - Methods of test Application properties - Conventional air spraying
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.401.1-1981 Paints and related materials - Methods of test Surface dry condition
AS/NZS 2312:1994 Guide to the protection of iron and steel against exterior atmospheric corrosion
AS 1580.402.1-1992 Paints and related materials - Methods of test Bend test
AS 2508.3.016-1982 Safe storage and handling information card - Methyl isobutyl ketone (MIBK)
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS/NZS ISO 9000.1:1994 Quality management and quality assurance standards Guidelines for selection and use
AS 2905-1986 Steel drums
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS 1580.214.1-1990 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS 1580.481.3-1992 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of corrosion of coated metal substrates
AS 3885-1991 Paints for steel structures - Galvanized and zinc primed - Latex
AS/NZS 2310:1995 Glossary of paint and painting terms
AS 1580.403.1-1981 Paints and related materials - Methods of test Scratch resistance
AS 1627.4-1989 Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning
AS 1580.101.5-1986 Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS 1580.481.1.7-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of checking
AS 1580.401.5-1993 Paints and related materials - Methods of test Hard dry condition - Sanding test
AS 1580.205.3-1981 Paints and related materials - Methods of test Application properties - Roller coating
AS/NZS 1580.457.1:1996 Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013)
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 2854-1986 Tinplate cans for general use
AS 1580.408.4-1993 Paints and related materials - Methods of test Adhesion (cross-cut)
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 1580.481.1.8-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of cracking
AS 1580.108.2-1993 Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge
AS/NZS ISO 9004.1:1994 Quality management and quality system elements Guidelines
AS 1580.214.5-1990 Paints and related materials - Methods of test - Consistency - Rotational viscometer
AS 1580.603.1-1992 Paints and related materials - Methods of test Finish
AS 1580.301.2-1990 Paints and related materials - Methods of test Non-volatile content by volume (volume solids) (Reconfirmed 2013)
AS 1580.105.1-1992 Paints and related materials - Methods of test Pretreatment of metal test panels - Solvent cleaning
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 1580.481.1.10-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of flaking and peeling
AS 1580.481.1.9-1991 Paints and related materials - Methods of test Coatings - Exposed to weathering - Degree of blistering
AS 1580.205.1-1981 Paints and related materials - Methods of test Application properties - Brushing

AS 3700-1998 Masonry structures
AS/NZS 3750.6:2009 Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020)
AS/NZS 2699.3:2000 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 2312:2002 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS/NZS 3750.14:1997 Paints for steel structures High-build epoxy (two-pack)
AS 3750.10-2008 (R2019) Paints for steel structures Full gloss epoxy (two-pack)
AS/NZS 2699.3:2002 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 3750.5:2008 Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020)
AS/NZS 5131:2016 Structural steelwork - Fabrication and erection
AS/NZS 2280:2012 Ductile iron pipes and fittings

View more information
US$60.92
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.