• There are no items in your cart

AS 4049.1-1992

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Paints and related materials - Road marking materials Solvent-borne paint - For use with drop-on beads

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-30-2017

Language(s)

English

Published date

01-01-1992

Preview

1 - AS 4049.1:1992 PAINTS AND RELATED MATERIALS - ROAD MARKING MATERIALS - SOLVENT-BORNE PAINT - FOR USE WITH DROP-ON-BEADS
4 - PREFACE
5 - FOREWORD
6 - 1 SCOPE
6 - 2 REFERENCED DOCUMENTS
6 - 3 DEFINITIONS
6 - 3.1 Bleeding
6 - 3.2 Luminance factor
6 - 4 CLASSIFICATION
6 - 5 COMPOSITION
6 - 6 TESTING AND PERFORMANCE REQUIREMENTS
6 - 6.1 Condition in the container
6 - 6.2 Residue on sieve
6 - 6.3 Consistency
6 - 6.4 No-pick-up time
6 - 6.5 Colour
6 - 6.6 Specular gloss
7 - 6.7 Luminance factor
7 - 6.8 Resistance to bleeding
7 - 6.9 Field testing
7 - 6.9.1 General
7 - 6.9.2 Degree of wear
7 - 6.9.3 Glass bead retention
7 - 6.10 Storage properties
7 - 7 PACKAGING
7 - 8 LABELLING
8 - APPENDIX A - METHODS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
8 - A1 SCOPE
8 - A2 STATISTICAL SAMPLING
8 - A3 PRODUCT CERTIFICATION
8 - A4 SUPPLIER’S QUALITY SYSTEM
8 - AS OTHER MEANS OF ASSESSMENT
8 - A6 SAMPLING PROCEDURE
8 - A6.1 Equipment
8 - A6.1.1 Containers
8 - A6.2 Precautions
9 - A6.3 Procedure
9 - A6.3.1 General
9 - A6.3.2 Filling
9 - A6.3.3 Holding tanks
9 - A6.3.4 Drums
10 - A6.4 Labelling
11 - APPENDIX B - LIST OF REFERENCED DOCUMENTS
12 - APPENDIX C - PREPARATION OF TEST PANELS
12 - C1 SCOPE
12 - C2 TEST PANEL MATERIAL
12 - C3 PAINT APPLICATION
12 - APPENDIX D - DETERMINATION OF LUMINANCE FACTOR
12 - D1 SCOPE
12 - D2 PRINCIPLE
12 - D3 APPARATUS AND MATERIALS
12 - D3.1 Calibrated white standard reference tile
12 - D3.2 Test panel
12 - D3.3 Colorimeter or spectrophotometer
12 - D4 PROCEDURE
12 - D5 CALCULATION
12 - D6 TEST REPORT
13 - APPENDIX E - ASSESSMENT OF RESISTANCE TO BLEEDING OF ROAD MARKING PAINT
13 - E1 SCOPE
13 - E2 PRINCIPLE
13 - E3 REAGENTS
13 - E3.1 Acetone
13 - E4 APPARATUS
13 - E4.1 Draw-down applicator
13 - E4.2 Wire brush
13 - E4.3 Adhesive tape
13 - E4.4 Oven
13 - E4.5 Lint-free cloth
13 - E4.6 Test Panels
13 - E5 TEST PROCEDURE
13 - E6 TEST REPORT
14 - APPENDIX F - FIELD TESTS FOR ROAD MARKING PAINT
14 - F1 SCOPE
14 - F2 PRINCIPLE
14 - F3 TEST SITE
14 - F4 APPARATUS
14 - F4.1 Paint application
14 - F4.2 Assessment of bead retention
14 - F4.3 Assessment of wear using photographic method (Method A)
14 - F4.4 Assessment of wear using grid method (Method B)
14 - F5 APPLICATION PROCEDURE
15 - F6 ASSESSMENT PROCEDURE
15 - F6.1 Bead retention
15 - F6.2 Degree of wear
15 - F6.3 Method A - Photographic method
15 - F6.4 Method B - Grid method
16 - F7 REPORT
21 - APPENDIX G - FIELD DATA SHEET
21 - G1 SCOPE

Provides requirements for solvent-borne paints for road markings and bituminous and concrete road surfaces.

Committee
CH-003
DocumentType
Standard
ISBN
0 7262 7679 0
Pages
16
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard sets out requirements for solvent-borne paints as used for line markings on bituminous and concrete road surfaces. The Standard is applicable to paints intended for use by spray application (see Note 1). It is also applicable to slower drying paints (see Clause 4) which may be applied by brush or roller. All paints are suitable for use with drop-on beads complying with AS 2009.NOTES:1 Spraying may be by air-atomizing or airless application processes.2 Alternative means for determining compliance with this Standard are given in Appendix A.

First published as AS K146-1967.
Revised and redesignated AS 4049.1-1992.

AS 3900.2(INT)-1992 Quality management and quality assurance Standards Generic guidelines for the application of AS 3901/NZS 9001/ISO 9001, AS 3902/NZS 9002/ISO 9002 and AS 3903/NZS 9003/ISO 9003
AS 1399-1990 Guide to AS 1199 - Sampling procedures and tables for inspection by attributes
AS 2854-1986 Tinplate cans for general use
AS 1199-1988 Sampling procedures and tables for inspection by attributes
AS 1580.401.8-1986 Paints and related materials - Methods of test No-pick-up time of road marking paints
AS 1580.103.1-1980 Paints and related materials - Methods of test Preliminary examination and preparation for testing
AS 1152-1993 Specification for test sieves
AS 2905-1986 Steel drums
AS 3904.2-1992 Quality management and quality system elements - Guidelines for services
AS 2310-1980 Glossary of paint and painting terms
AS 1580.104.1-1992 Paints and related materials - Methods of test Recommended materials for test panels
AS 1580.601.1-1975 Paints and related materials - Methods of test Colour - Visual comparison
AS 1580.211.2-1980 Paints and related materials - Methods of test Ease of manual re-incorporation
AS 3900.1-1987 Quality management and quality assurance Standards Guidelines for selection and use
AS 3904.1-1987 Quality management and quality system elements Guidelines
AS 1580.107.3-1980 Paints and related materials - Methods of test Determination of wet film thickness by wheel gauge
AS 2009-1991 Glass beads for road-marking materials
AS 1580.105.2-1993 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS 1580.214.1-1990 Paints and related materials - Methods of test - Consistency - Stormer viscometer
AS 1580.211.1-1980 Paints and related materials - Methods of test Degree of settling
AS A99-1959 Bituminous felt roofing. Type 1(c) coated organic fibre felt roofing
AS 1580.101.1-1986 Paints and related materials - Methods of test Air drying conditions
AS 1580.602.2-1974 Paints and related materials - Methods of test Specular gloss

AS 1742.2-1994 Manual of uniform traffic control devices Traffic control devices for general use

US$63.97
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.