• There are no items in your cart

AS 4049.1-2005

Current

Current

The latest, up-to-date edition.

Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

01-21-2005

Preview

Specifies requirements for solvent-borne paints used for markings on pavement surfaces. The Standard applies to paints suitable for use with glass beads complying with AS/NZS2009, and intended for use by spray application, brush or a roller.

This Standard sets out requirements for solvent-borne paints as used for markings on pavement surfaces. The Standard is applicable to paints intended for use by spray application. It is also applicable to slower drying paints which may be applied by brush or roller. All paints are suitable for use with glass beads complying with AS/NZS2009.Alternative means for determining compliance with this Standard are given in AppendixA.Spraying may be by air-atomizing or airless application processes.

Committee
CH-003
DocumentType
Standard
ISBN
0 7337 6432 0
Pages
31
ProductNote
Reconfirmed 27/05/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 27/05/2016
PublisherName
Standards Australia
Status
Current
Supersedes

First published as AS K146-1967.Revised and redesignated AS 4049.1-1992.Second edition 2005.Reconfirmed 2016. Originated as K146-1967. Revised and redesignated AS 4049.1-1992. Second edition 2005.

AS 2905-2005 Steel drums
AS 1199.2-2003 Sampling procedures for inspection by attributes Sampling plans indexed by limiting quality (LQ) for isolated lot inspection (Reconfirmed 2016)
AS/NZS 1580.104.1:2000 Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013)
AS/NZS 1580.205.2:1997 Paints and related materials - Methods of test Application properties - Conventional spraying (Reconfirmed 2013)
AS 2905-1986 Steel drums
AS 2378-1996 Density bottles
AS/NZS 1580.108.1:1994 Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013)
AS 2854-2004 Tinplate cans for general use
AS/NZS 1580.103.1:1995 Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013)
AS/NZS 1580.401.8:1997 Paints and related materials - Methods of test No-pick-up time of road marking paints (Reconfirmed 2013)
AS/NZS 2009:2002 Glass beads for pavement-marking materials
AS/NZS 1580.211.2:1995 Paints and related materials - Methods of test Ease of manual re-incorporation (Reconfirmed 2013)
AS/NZS 2904:1995 Damp-proof courses and flashings
AS 1199.3-2003 Sampling procedures for inspection by attributes Skip-lot sampling procedures (Reconfirmed 2016)
AS 1742.3-2002 Manual of uniform traffic control devices - Traffic control devices for works on roads
AS/NZS 1580.601.1:1995 Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013)
AS 2700-1996 Colour Standards for general purposes - Swatches
AS 2758.2-1996 Aggregates and rock for engineering purposes - Aggregate for sprayed bituminous surfacing
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS/NZS ISO 9000:2000 Quality management systems - Fundamentals and vocabulary
AS/NZS 2310:2002 Glossary of paint and painting terms (Reconfirmed 2016)
AS 1152-1993 Specification for test sieves
AS/NZS ISO 9004:2000 Quality management systems - Guidelines for performance improvements
AS/NZS ISO 9000:2006 Quality management systems - Fundamentals and vocabulary
AS/NZS 1580.107.2:1995 Paints and related materials - Methods of test Determination of wet film thickness from wet film mass (Reconfirmed 2013)
AS/NZS 2009:2006 Glass beads for pavement-marking materials (Reconfirmed 2016)
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
AS/NZS 1580.205.4:1998 Paints and related materials - Methods of test Application properties - Airless spraying (Reconfirmed 2013)
AS/NZS 1580.107.3:1997 Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013)
AS 1199.4-2003 Sampling procedures for inspection by attributes Procedures for assessment of declared quality levels (Reconfirmed 2016)
AS/NZS 1580.211.1:1995 Paints and related materials - Methods of test Degree of settling (Reconfirmed 2013)
AS 1580.107.1-2004 Paints and related materials - Methods of test Determination of wet film thickness from dry film mass
AS 1199.0-2003 Sampling procedures for inspection by attributes Introduction to the ISO 2859 attribute sampling system (Reconfirmed 2016)
AS/NZS 1580.602.2:1995 Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013)
HB 18.44-1991 Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products
AS 1580.105.2-2002 Paints and related materials - Methods of test Pretreatment of metal test panels - Sanding
AS/NZS 1580.101.1:1999 Paints and related materials - Methods of test Conditions of test - Temperature, humidity and airflow control (Reconfirmed 2013)

AS 1742.2-2009 Manual of uniform traffic control devices Traffic control devices for general use
AS 1742.2-1994 Manual of uniform traffic control devices - Traffic control devices for general use

View more information
US$96.22
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.