• There are no items in your cart

ASTM C 726 : 2017

Current

Current

The latest, up-to-date edition.

Standard Specification for Mineral Wool Roof Insulation Board

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

04-19-2017

This specification covers the composition and physical properties of mineral wool insulation board used above structural roof decks in building construction.

1.1This specification covers the composition and physical properties of mineral wool insulation board used above structural roof decks in building construction. The mineral wool roof insulation acts as a base for systems such as single-ply, polymer-modified bitumen and built-up roof. This specification also covers mineral wool insulation boards that incorporate a fibrous high density upper layer on the top surface

1.2It is possible that the use of thermal insulation materials covered by this specification will be regulated by building codes or other agencies that address fire performance, or both. The fire performance of the material needs to be addressed through standard fire test methods established by the appropriate governing documents.

1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of the regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 16
DocumentType
Standard
Pages
4
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM C 1558 : 2019 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
ASTM C 956 : 2004 : R2019 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete

ASTM C 165 : 2023 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM E 2058 : 2001 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 84 : 2023 : REV D Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 2058 : 2006 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C 168 : 2019 Standard Terminology Relating to Thermal Insulation
ASTM C 177 : 2019 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM D 2126 : 1999 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM C 303 : 2021 Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
ASTM D 2126 : 2004 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM C 1763 : 2019 : REDLINE Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM E 84 : 2023 : REV C Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 2058 : 2019 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D 482 : 2013 Standard Test Method for Ash from Petroleum Products
ASTM C 303 : 2010 : R2016 : EDT 1 Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation
ASTM C 1363 : 2019 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C 1363 : 2005 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C 1363 : 1997 Standard Test Method for the Thermal Performance of Building Assemblies by Means of a Hot Box Apparatus
ASTM C 1763 : 2020 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM D 2126 : 2015 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 390 : 2008 : R2024 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM C 1763 : 2016 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 518 : 2002 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 1763 : 2014 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM E 2058 : 2002 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C 390 : 2008 : R2019 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 168 : 2024 Standard Terminology Relating to Thermal Insulation
ASTM C 1763 : 2019 : EDT 1 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM E 2058 : 2013 : REV A Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 84 : 2020 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 665 : 2023 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
ASTM E 2058 : 2002 : REV A Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 165 : 2007 : R2017 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C 1363 : 2011 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C 518 : 2017 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 518 : 2021 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D 2126 : 2009 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM E 84 : 2023 : REV B Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 177 : 2019 : EDT 1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM E 2058 : 2000 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E 2058 : 2009 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C 665 : 2017 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
ASTM C 168 : 2022 Standard Terminology Relating to Thermal Insulation
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1763 : 2019 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials
ASTM C 203 : 2022 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C 203 : 2005 : REV A : R2017 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM E 2058 : 2003 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM C 1363 : 2024 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM C 303 : 1998 Standard Test Method for Dimensions and Density of Preformed Block and Broad-Type Thermal Insulation
ASTM C 518 : 1998 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.