ASTM D 256 : 2015-10
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHODS FOR DETERMINING THE IZOD PENDULUM IMPACT RESISTANCE OF PLASTICS
Published date
10-01-2015
Superseded date
10-18-2015
Sorry this product is not available in your region.
CONTAINED IN VOL. 08.01, 2015 Describes the determination of the resistance of plastics to 'standardized' pendulum-type hammers, mounted in 'standardized' machines, in breaking standard specimens with one pendulum swing.
| Committee |
D 20
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| Standards | Relationship |
| UNE 53189-6:1974 | Identical |
| ASTM F 648 : 2014 : REDLINE | Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants |
| MIL-C-47224 Revision B:1993 | Compound, Molding, Transfer, Epoxy Resin, Single-Component |
| ASTM D 5140 : 1995 | Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004) |
| AWS G1.1M/G1.1 : 2006 | GUIDE TO ULTRASONIC ASSEMBLY OF THERMOPLASTICS |
| ASTM D 4549 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS) |
| ASTM D 3013 : 2013 : REDLINE | Standard Specification for Epoxy Molding Compounds |
| CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
| CSA NGV 5.1 : 2016 | RESIDENTIAL FUELING APPLIANCES |
| ASTM F 636 : 1985 : R1991 | Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996) |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| ASTM D 3965 : 2016 : REDLINE | Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings |
| ASTM D 6713 : 2014 : REDLINE | Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF) |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| SAE AMS3617F : 2014 | POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS |
| SAE AMS3732B | Potting Compound, Epoxy One Part, Filled, Heat Cure, Low CTE |
| BS 3531-8:1982 | Surgical implants Specification for ceramic materials based on alumina |
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| AWWA M55 : 1 | PE PIPE - DESIGN AND INSTALLATION |
| ISO 20126:2012 | Dentistry — Manual toothbrushes — General requirements and test methods |
| AWWA F101 : 2013 | CONTACT-MOLDED, FIBERGLASS-REINFORCED PLASTIC WASH-WATER TROUGHS AND LAUNDERS |
| SAE AMS3870E | Ceramic Moldings and Extrusions Dense, Ultra-High Alumina (99% Al2O3) |
| SAE AMS3628E | Plastic Extrusions and Moldings, Polycarbonate General Purpose |
| MIL-C-46866 Base Document:1973 | Compound, Insulating, Electrical and Application of (No S/S Document) |
| DOD-STD-35-24 Revision A:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM BEARINGS (NO S/S DOCUMENT) |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL-M-87176 Base Document:1982 | MOLDING MATERIAL, POLYPROPYLENE, MODIFIED MECHANICAL USE ONLY |
| MIL-P-46185 Base Document:1983 | Plastic Molding and Extrusion Materials, Polyethersulfone |
| MIL-P-46131 Revision B:1975 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED, GLASS FIBER REINFORCED (NO S/S DOCUMENT) |
| MIL-P-83668 Revision A:1976 | PLASTIC BOARD (FOR PACKAGING APPLICATIONS) (S/S BY A-A-58078) |
| MIL-O-71039 Base Document:1992 | Obturating Band, Plastic, Split (Molded) |
| MIL B 17901 : B | BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED |
| API TR 17TR1 : 2003 | EVALUATION STANDARD FOR INTERNAL PRESSURE SHEATH POLYMERS FOR HIGH TEMPERATURE FLEXIBLE PIPES |
| MIL-DTL-52543 Revision E:2010 | Light, Marker, Ground-Obstruction |
| MIL-P-46120 Revision B:1983 | Plastic Moldingand Extrusion Material, Polysulfone (No S/S Document) |
| MIL-F-10336 Revision E:1977 | Fiber Sheet, Vulcanized (S/S by ASTM-D710) |
| MIL-I-24768 Base Document:1992 | Insulation, Plastics, Laminated, Thermosetting; General Specification for |
| MIL-R-45036 Revision D:1978 | RUBBER, HARD (EBONITE), NATURAL OR SYNTHETIC, SHEET, STRIP, ROD, TUBING, AND MOLDED PARTS (NO S/S DOCUMENT) |
| MIL-M-24325 Base Document:1968 | Molding Material, Plastic, Epoxy Compounds Thermosetting (S/S by MIL-M-14) |
| MIL-P-46129 Revision A:1975 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED (NO S/S DOCUMENT) |
| H-B-00681 Revision D:1968 | BRUSH, TYPEWRITER (S/S BY A-A-3077) |
| UU B 001254 : NOTICE 1 | BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER |
| MIL-P-25374 Revision B:1985 | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED (NO S/S DOCUMENT) |
| MIL C 47027 : 0 | COMPOUND, MOLDING, PLASTIC, RIGID, THERMOPLASTIC |
| GGG-T-001310 Base Document:1967 | TAPE, FISH, STEEL (NO S/S DOCUMENT) |
| MIL-DTL-24191 Revision D:1996 | Plastic Sheet, Cell or Continuous Cast, Acrylic, Shipboard Application(Illumination and Signal Lighting) |
| MIL-I-26525 Revision F:1988 | Indicator, Voltage, Battery Generator 28 Volt DC (Nominal) (S/S by A-A-52508) |
| MIL-B-24781 Base Document:1993 | Batterboard Systems, Synthetic (S/S by A-A-59001) |
| FC 3-260-18F : 2015 | UNIFIED FACILITIES CRITERIA - AIR FORCE AIRCRAFT ARRESTING SYSTEMS (AAS) INSTALLATION, OPERATION, AND MAINTENANCE (IO&M;) |
| L-C-530 Revision C:1987 | COATING, PIPE, THERMOPLASTIC RESIN (NO S/S DOCUMENT) |
| L-H-490 Revision B:1992 | Holder, Card-Label, (Plastic) (S/S by A-A-3115) |
| MIL-I-16923 Revision H:1991 | Insulating Compound, Electrical, Embedding, Epoxy (S/S by A-A-59877) |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL-DTL-17901 Revision C:2005 | Bearing Components, Bonded Synthetic Rubber, Water Lubricated |
| MIL-P-43043 Revision C:1978 | Plastic Molding Material, Pre-Mix, Polyester, Glass FiberReinforced |
| MIL-B-3889 Revision B:1968 | Box, Plastic, Compartmented, Small Parts (S/S by A-A-1738) |
| MIL-O-71130 Base Document:1992 | Obturating Band, Plastic Split (Molded) |
| AA-R-200 Revision F:1987 | Refrigerator, Mechanical, Commercial, Self-Contained, Reach-In and Pass-Through (No S/S Document) |
| MIL O 70548 : 0 | OBURATING BAND, PLASTIC SPLIT (MOLDED) |
| MIL-C-24449 Revision A:1981 | Cast Polymethyl Methacrylate for Sheet Stock Custom Castings, and Finished Windows |
| A-A-59001 Revision A:2012 | Batterboard, Synthetic |
| L-P-1183 Revision B:1977 | PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID (S/S BY ASTM-D1788) |
| MIL-P-46122 Revision B:1975 | PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER (NO S/S DOCUMENT) |
| MIL-M-24519 Revision E:1992 | Molding Plastics, Electrical, Thermoplastic |
| L-P-1041 Revision A:1973 | PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER (NO S/S DOCUMENT) |
| MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST\'S EQUIPMENT PACK (NO S/S DOCUMENT) |
| MIL-DTL-20268 Revision H:2017 | Frame, Cap |
| MIL P 46169 : A | PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBER REINFORCED (FOR GENERAL PURPOSE APPLICATIONS) |
| MIL-P-46179 Revision A:1986 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE (PAI) (S/S BY ASTM-D5204) |
| MIL P 24191 : D | PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING) |
| L-P-398 Revision B:1973 | PLASTIC MOLDING MATERIAL, STYRENE-BUTADIENE (S/S BY ASTM-D4549) |
| MIL-S-36390 Base Document:1965 | SHIELD, HEAT, DISTILLING FLASK, COMPRESSED ASBESTOS AND CEMENT (NO S/S DOCUMENT) |
| L-P-504 Revision E:1991 | Plastic Sheet and Film, Cellulose Acetate |
| MIL-M-14 Revision H:1990 | Molding Compounds, Thermosetting (S/S by ASTM-D5948) |
| MIL-P-46161 Revision A:1976 | PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED (NO S/S DOCUMENT) |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRICAL INSULATION: SHEETS, GLASS CLOTH, SILICONE RESIN (S/S BY MIL-I-24768/17) |
| MIL-P-46115 Revision B:1977 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE (NO S/S DOCUMENT) |
| A-A-58078 Base Document:1996 | Plastic Board (for Packaging Applications) |
| MIL-R-21931 Revision A:1977 | RESIN, EPOXY (NO S/S DOCUMENT) |
| I.S. EN ISO 20126:2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
| ASTM D 6394 : 2014 : REDLINE | Standard Specification for Sulfone Plastics (SP) |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM F 2881/F2881M : 2018 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| CSA C22.2 No. 0.17 : 2000 : R2004 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| CSA B481 SERIES : 2012 | GREASE INTERCEPTORS |
| CSA C22.2 No. 2515:2009 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| CSA C22.2 No. 2515 : 2009 : INC : UPD 1 : 2012 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| CSA C22.2 No. 2515 : 2009 : INC : UPD 2 : 2014 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| ASTM D 3998 : 1981 | Test Method for Pendulum-Impace Resistance of Extrusion Plastometer Extrudates (Withdrawn 1989) |
| ASTM D 3489 : 2017 : REDLINE | Standard Test Methods for Microcellular Urethane Materials |
| (INACTIVE RECORD)ASTM D 5336 : 2015-04 | CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
| ASTM D 3222 : 2005 : R2015 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| IEEE 1680.3-2012 | IEEE Standard for Environmental Assessment of Televisions |
| IEEE 1680.2-2012 | IEEE Standard for Environmental Assessment of Imaging Equipment |
| IEEE 1133-1988 | IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications |
| DIN EN ISO 20126:2012-06 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
| ISO 13628-2:2006 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| ASTM PS 2 : 1994 | Specification for Molding Plastics, Electrical, Thermoplastic (Withdrawn 1997) |
| ASTM F 968 : 1993 : R2002 : EDT 1 | Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers (Withdrawn 2008) |
| ASTM D 7293 : 2012 : REDLINE | Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI) |
| ASTM D 706 : 2015 : REDLINE | Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA) |
| ASTM D 6100 : 2017 : REDLINE | Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM) |
| ASTM D 705 : 1999 : R2012 | Standard Specification for Urea-Formaldehyde Molding Compounds |
| BS 7253-2:1990 | Non-metallic materials for surgical implants Specification for ceramic materials based on alumina |
| ASTM D 707 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| ASTM D 704 : 1999 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM D 6262 : 2017 : REDLINE | Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
| ANSI C37.57 : 1990 | SWITCHGEAR - METAL-ENCLOSED INTERRUPTER SWITCHGEAR ASSEMBLIES - CONFORMANCE TESTING |
| ASTM F 561 : 2013 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM F 790 : 2008 : R2013 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| ASTM D 705 : 1999 | Standard Specification for Urea-Formaldehyde Molding Compounds |
| ASTM D 6339 : 2011 | Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS) |
| ASTM F 2881 : 2011 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM C 1355/C1355M : 1996 : R2001 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM D 5948 : 2005 : R2012 | Standard Specification for Molding Compounds, Thermosetting |
| ASTM C 1349 : 2017 : REDLINE | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| ASTM D 4203 : 2017 : REDLINE | Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials |
| ASTM D 5204 : 2017 : REDLINE | CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS |
| ASTM C 470/C470M : 2015 : REDLINE | Standard Specification for Molds for Forming Concrete Test Cylinders Vertically |
| ASTM F 3219 : 2017 | Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings |
| ASTM G 178 : 2016 : REDLINE | Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique |
| ANSI C37.55 : 1989 | MEDIUM VOLTAGE METAL-CLAD ASSEMBLIES - CONFORMANCE TEST PROCEDURES |
| ASTM D 705 : 1999 : R2004 | Standard Specification for Urea-Formaldehyde Molding Compounds |
| ASTM C 1355/C1355M : 1996 : R2011 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 1355/C1355M : 1996 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM C 1355/C1355M : 1996 : R2015 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM D 5948 : 2005 : EDT 1 | Standard Specification for Molding Compounds, Thermosetting |
| NACE RP 03 04 : 2004 | DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES |
| AASHTO M 330 : 2013 | SPECIFICATION FOR POLYPROPYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| ASTM D 6098 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) (Withdrawn 2025) |
| ASTM D 7745 : 2011 | Standard Practice for Testing Pultruded Composites |
| ASTM D 704 : 1999 : R2012 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM F 2026 : 2017 : REDLINE | Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications |
| ASTM C 1355/C1355M : 1996 : R2006 | Standard Specification for Glass Fiber Reinforced Gypsum Composites |
| ASTM D 787 : 2012-08 | SPECIFICATION FOR ETHYL CELLULOSE MOLDING AND EXTRUSION COMPOUNDS |
| ASTM D 5948 : 2005 | Standard Specification for Molding Compounds, Thermosetting |
| ASTM D 4673 : 2016 : REDLINE | Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials |
| ASTM F 2881 : 2011 : R2015 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM D 5138 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
| ASTM D 6395 : 2011 : REDLINE | Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics |
| ASTM D 704 : 1999 : R2004 | Standard Specification for Melamine-Formaldehyde Molding Compounds |
| ASTM F 790 : 2008 | Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
| CSA C22.2 No. 0.17 : 2000 : R2013 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| CSA C22.2 No. 0.17 : 2000 | EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
| ASTM D 1636 : 2013 : REDLINE | Standard Specification for Allyl Molding Compounds |
| ASTM D 1784 : 2011 : REDLINE | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds |
| ISO 19213:2017 | Implants for surgery — Test methods of material for use as a cortical bone model |
| ASTM D 4225 : 2003 | Standard Specification for Styrene-Butadiene Sheeting (Withdrawn 2009) |
| ASTM D 5941 : 1996 | Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998) |
| ASTM E 1420 : 1991 | Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
| ASTM D 1562 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
| ASTM D 8033 : 2016 | Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
| ASTM D 1822M : 1993 | Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials (Withdrawn 1996) |
| ASTM D 5676 : 1999 | Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004) |
| ASTM F 1876 : 1998 : R2003 : EDT 1 | Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012) |
| L-P-535 Revision E:1979 | Plastic Sheet (Sheeting): Plastic Strip: Poly (Vinyl Chloride) and Poly (Vinyl chloride-Vinyl Acetate), Rigid |
| ASTM D 4634 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
| ASTM D 4617 : 2003 | Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012) |
| ASTM F 1579 : 2002 : EDT 1 | Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011) |
| ASTM D 6263 : 2015 : REDLINE | Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
| ASTM F 1579 : 2002 | Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications |
| ASTM D 1788 : 1981 | Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988) |
| ASTM F 968 : 1993 : R1998 | Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM D 1039 : 2016 : REDLINE | Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation |
| ASTM D 6261 : 2014 : REDLINE | Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| ASTM F 1876 : 1998 | Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications |
| ASTM D 5476 : 1999 | Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005) |
| BS ISO 19213:2017 | Implants for surgery. Test methods of material for use as a cortical bone model |
| ASTM F 968 : 1993 : R2002 | Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM D 4396 : 2015 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications |
| ASTM D 5990 : 2000 | Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007) |
| ASTM D 1897 : 1988 | Recommended Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials (Withdrawn 1992) |
| ASTM D 5593 : 1999 : EDT 1 | Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) |
| ASTM D 4349 : 2016 : REDLINE | Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
| ASTM D 729 : 1995 | Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000) |
| ASTM D 5942 : 1996 | Test Method for Determination of Charpy Impact Strength (Withdrawn 1998) |
| SAE AMS3650D | Rods, Sheets, and Molded Shapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized |
| MIL-R-47025 Revision A:1991 | Resin, Casting, Fire Retardant, Epoxy Base |
| ASTM F 2820 : 2012 | Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
| ASTM D 2852 : 2016 : REDLINE | Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| CSA B481 SERIES : 2012 : R2017 | GREASE INTERCEPTORS |
| CSA S806: 2012 | DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
| CSA C22.2 No. 2515 : 2009 : R2014 | ABOVEGROUND REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| ASTM F 635 : 1985 : R1991 | Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996) |
| ASTM F 988 : 1986 | Guide for Specifying Carbon-Fiber Randomly Reinforced Ultra-High-Molecular-Weight Polyethylene for Medical Devices (Withdrawn 1992) |
| ASTM D 3222 : 2005 : R2010 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| ASTM D 3222 : 2005 | Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| NSF 52 : 2017 | SUPPLEMENTAL FLOORING |
| NSF 426 : 2017 | ENVIRONMENTAL LEADERSHIP AND CORPORATE SOCIAL RESPONSIBILITY ASSESSMENT OF SERVERS |
| ASTM D 619 : 2014 | Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 731 : 2010-07 | TEST METHOD FOR MOLDING INDEX OF THERMOSETTING MOLDING POWDER |
| ANSI Z80.6 : 1983 | PHYSICOCHEMICAL PROPERTIES OF CONVENTIONAL HARD PLASTIC CONTACT LENSES, |
| ASTM D 1201 : 2013 : REDLINE | Standard Specification for Thermosetting Polyester Molding Compounds |
| API 17L1 : 2013 | SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| ASTM D 3641 : 2015 : REDLINE | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
| API 15S : 2016 | SPOOLABLE REINFORCED PLASTIC LINE PIPE |
| A-A-52508 Revision A:1996 | Indicator, Voltage: Battery-Generator, 28 Volt DC (Nominal) (Metric) |
| ASTM F 2759 : 2011 : REDLINE | Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices |
| ANSI/CSA NGV 5.1-2016 (R2020) | Residential fueling appliances |
| CSA C22.2 No. 211.3 : 1996(R2007) | REINFORCED THERMOSETTING RESIN CONDUIT (RTRC) AND FITTINGS |
| ASTM D 4067 : 2016 : REDLINE | Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods |
| ASTM F 712 : 2006 : R2011 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM F 712 : 2006 | Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
| ASTM D 4812 : 2011 : REDLINE | Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics |
| ASTM D 1822 : 2013 : REDLINE | Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| IEEE 1680.1-2009 | IEEE Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays |
| BS EN ISO 20126 : 2012 | DENTISTRY - MANUAL TOOTHBRUSHES - GENERAL REQUIREMENTS AND TEST METHODS (ISO 20126:2012) |
| SAE ARP5943 | Snowplows and Hitches |
| SAE ARP6059 | Solid De-Icing/Anti-Icing Material Spreader for Airport Application |
| ASTM E 2136 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability |
| ASTM D 3935 : 2015 : REDLINE | Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material |
| SAE J1875_200105 | Materials for Plastic Check Valves for Vacuum Booster Systems |
| SAE AMS3731C | Potting Compound, Epoxy Bisphenol A-Type |
| CSA C22.2 No. 126 : 0 | CABLE TRAY SYSTEMS |
| NBR 16161 : 2015 | STORAGE OF FLAMMABLE AND COMBUSTIBLE LIQUIDS - STEEL UNDERGROUND STORAGE TANK - MANUFACTURING AND PARTITIONING SPECIFICATION |
| CSA/ANSI NGV 5.2-2017 | Vehicle fueling appliances (VFA) |
| ASME A112.19.8 : 2007 | SUCTION FITTINGS FOR USE IN SWIMMING POOLS, WADING POOLS, SPAS, AND HOT TUBS |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| ASME PVHO 1 : 2016 | SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 3641 : 2015 : REDLINE | Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
| ISO 180:2000 | Plastics — Determination of Izod impact strength |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.