• There are no items in your cart

ASTM D 3740 : 2001

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Minimum Requirements for Agencies Engaged in the Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

10-10-1999

1.1 This practice establishes minimum qualifications for agencies engaged in the testing and inspection of soil and rock. Minimum requirements for field and laboratory personnel are defined. The practice also covers the establishment and maintenance of a quality system.

1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on soil and rock, and for establishing essential characteristics pertaining to an agency's organization, personnel, facilities, and quality system. This practice may be supplemented by more specific criteria and requirements for particular projects.

1.3 This practice can be used as a basis to evaluate testing and inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of soil and rock as used in engineering design and construction.

1.4 This practice is not intended to apply to agencies engaged in chemical testing of soil, rock, and contained fluid. The minimum requirement for those agencies can be found in Specification D5522.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.6 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this practice may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project's many unique aspects. The word "Standard" in the title of this document means only that the document has been approved through the ASTM consensus process.

Committee
D 18
DocumentType
Standard Practice
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 5268 : 2013 Standard Specification for Topsoil Used for Landscaping Purposes
ASTM D 4612 : 2016 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
ASTM D 5255 : 2015 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
ASTM D 5434 : 2012 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021)
ASTM D 2166/D2166M : 2016 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
ASTM D 7351 : 2019 Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
ASTM D 5335 : 2014 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges (Withdrawn 2023)
ASTM D 4611 : 2016 Standard Test Method for Specific Heat of Rock and Soil
ASTM D 6914/D6914M : 2016 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
ASTM D 5126 : 2016 : EDT 1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
ASTM D 4373 : 2014 Standard Test Method for Rapid Determination of Carbonate Content of Soils
ASTM D 5239 : 2012 : EDT 1 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization (Withdrawn 2021)
ASTM D 4648/D4648M : 2016 Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil
ASTM D 5978/D5978M : 2016 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM D 7181 : 2011 Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM D 7928 : 2017 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
ASTM D 5092/D5092M : 2016 Standard Practice for Design and Installation of Groundwater Monitoring Wells
ASTM D 4404 : 2018 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
ASTM D 5298 : 2016 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
ASTM D 7299 : 2012 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
ASTM D 6024/D6024M : 2016 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
ASTM D 6773 : 2016 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
ASTM D 5550 : 2014 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
ASTM D 5971/D5971M : 2016 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D 2974 : 2014 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
ASTM D 6103/D6103M : 2017 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
ASTM D 560/D560M : 2016 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
ASTM D 2977 : 2014 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D 6724/D6724M : 2016 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM D 4044/D4044M : 2015 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers (Withdrawn 2024)
ASTM D 4633 : 2016 Standard Test Method for Energy Measurement for Dynamic Penetrometers
ASTM D 5607 : 2016 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D 854 : 2014 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023)
ASTM D 7929 : 2014 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
ASTM D 4254 : 2016 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
ASTM D 4381/D4381M : 2012 Standard Test Method for Sand Content by Volume of Bentonitic Slurries (Withdrawn 2021)
ASTM D 2488 : 2017 : EDT 1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
ASTM D 4104 : 2017 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
ASTM D 4972 : 2019 Standard Test Methods for pH of Soils
ASTM D 4631 : 2018 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
ASTM D 586 : 2019 Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products
ASTM D 1241 : 2015 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses (Withdrawn 2024)
ASTM D 4959 : 2016 Standard Test Method for Determination of Water Content of Soil By Direct Heating
ASTM D 6635 : 2015 Standard Test Method for Performing the Flat Plate Dilatometer (Withdrawn 2024)
ASTM D 6941 : 2019 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
ASTM D 4436 : 2013 : EDT 1 Standard Test Method for Rock Bolt Long-Term Load Retention Test (Withdrawn 2022)
ASTM D 4403 : 2012 Standard Practice for Extensometers Used in Rock
ASTM D 2844/D2844M : 2018 Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils
ASTM D 4643 : 2017 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
ASTM D 7070 : 2016 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
ASTM D 7277 : 2016 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
ASTM D 2167 : 2015 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method (Withdrawn 2024)
ASTM D 2937 : 2017 : EDT 2 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
ASTM D 8167/D8167M : 2018 : REV A Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
ASTM D 7949 : 2014 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023)
ASTM D 6067/D6067M : 2017 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization and Estimation of Hydraulic Conductivity
ASTM D 7759/D7759M : 2014 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
ASTM D 7743 : 2012 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
ASTM D 4428/D4428M : 2014 Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023)
ASTM D 8199 : 2019 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
ASTM D 3080/D3080M : 2011 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020)
ASTM D 6034 : 2017 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
ASTM D 4435 : 2013 : EDT 1 Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022)
ASTM D 2978 : 2015 : EDT 1 Standard Test Methods for Volume of Processed Peat Materials
ASTM D 4623 : 2016 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge
ASTM D 1143/D1143M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D 5731 : 2016 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
ASTM D 6128 : 2016 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Tester
ASTM D 6780/D6780M : 2012 Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
ASTM D 7626 : 2019 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
ASTM D 1635/D1635M : 2012 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D 1997 : 2013 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D 5850 : 2018 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
ASTM D 6236 : 2011 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil (Withdrawn 2020)
ASTM D 3689/D3689M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D 6683 : 2019 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
ASTM D 6913/D6913M : 2017 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
ASTM D 2973 : 2016 Standard Test Method for Total Nitrogen in Peat Materials
ASTM D 7046 : 2011 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration (Withdrawn 2020)
ASTM D 806 : 2011 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
ASTM D 4700 : 2015 Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024)
ASTM D 4546 : 2014 : EDT 1 Standard Test Methods for One-Dimensional Swell or Collapse of Soils
ASTM D 4427 : 2018 Standard Classification of Peat Samples by Laboratory Testing
ASTM D 6836 : 2016 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
ASTM D 7400/D7400M : 2019 Standard Test Methods for Downhole Seismic Testing
ASTM D 5874 : 2016 Standard Test Methods for Determination of the Impact Value (IV) of a Soil
ASTM D 2980 : 2017 : EDT 1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
ASTM D 6032/D6032M : 2017 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
ASTM D 8037/D8037M : 2016 Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
ASTM D 8169/D8169M : 2018 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
ASTM E 329 : 2018 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM D 4452 : 2014 Standard Practice for X-Ray Radiography of Soil Samples
ASTM D 8198 : 2018 Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches
ASTM D 7208 : 2014 : EDT 1 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D 3550/D3550M : 2017 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
ASTM D 6938 : 2017 : REV A Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D 7830/D7830M : 2014 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
ASTM D 6035/D6035M : 2013 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM D 6027/D6027M : 2015 Standard Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
ASTM D 6169/D6169M : 2013 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D 5080 : 2017 Standard Test Method for Rapid Determination of Percent Compaction
ASTM D 5084 : 2016 : REV A Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D 1586/D1586M : 2018 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
ASTM D 3441 : 2016 Standard Test Method for Mechanical Cone Penetration Testing of Soils
ASTM D 4914/D4914M : 2016 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
ASTM D 6598 : 2011 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
ASTM D 5093 : 2015 : EDT 1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring (Withdrawn 2024)
ASTM D 6539 : 2013 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air (Withdrawn 2022)
ASTM D 5202/D5202M : 2016 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
ASTM D 5780 : 2018 Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load
ASTM D 7047 : 2015 : EDT 1 Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
ASTM D 5855/D5855M : 2015 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
ASTM D 6758 : 2018 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
ASTM D 7013/D7013M : 2015 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
ASTM D 6028 : 2017 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
ASTM D 698 : 2012 : EDT 2 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
ASTM D 4221 : 2018 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
ASTM D 8152 : 2018 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
ASTM D 1587/D1587M : 2015 Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024)
ASTM D 2850 : 2015 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D 8107 : 2018 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
ASTM D 4945 : 2017 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
ASTM D 5778 : 2012 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D 5220 : 2014 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
ASTM D 1633 : 2017 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
ASTM D 4718/D4718M : 2015 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
ASTM D 5143 : 2006 : R2015 : EDT 1 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography (Withdrawn 2023)
ASTM D 1557 : 2012 : EDT 1 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
ASTM D 2435/D2435M : 2011 Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
ASTM D 7608 : 2018 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
ASTM D 6230 : 2013 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM D 5240/D5240M : 2012 : R2013 : EDT 1 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate
ASTM D 6760 : 2016 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
ASTM D 4511 : 2011 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
ASTM D 5918 : 2013 : EDT 1 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils (Withdrawn 2022)
ASTM D 5882 : 2016 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
ASTM D 6940 : 2018 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
ASTM D 4644 : 2016 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
ASTM D 5269 : 2015 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method (Withdrawn 2024)
ASTM D 6151/D6151M : 2015 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024)
ASTM D 5520 : 2018 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D 7015/D7015M : 2018 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
ASTM D 5195 : 2014 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
ASTM D 7891 : 2015 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell
ASTM D 4531 : 2015 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
ASTM D 4992 : 2014 : EDT 1 Standard Practice for Evaluation of Rock to be Used for Erosion Control
ASTM D 7986 : 2017 : REV A Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
ASTM D 5716/D5716M : 2015 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
ASTM D 8082 : 2018 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
ASTM D 1632 : 2017 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
ASTM D 5856 : 2015 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)
ASTM D 1556/D1556M : 2015 : EDT 1 Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method (Withdrawn 2024)
ASTM D 3966/D3966M : 2007 : R2013 : EDT 1 Standard Test Methods for Deep Foundations Under Lateral Load
ASTM D 3551 : 2017 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
ASTM D 2573/D2573M : 2018 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
ASTM D 1883 : 2016 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D 6473 : 2015 Standard Test Method For Specific Gravity And Absorption of Rock For Erosion Control
ASTM D 7101 : 2013 : EDT 1 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022)
ASTM D 425 : 2017 Standard Test Method for Centrifuge Moisture Equivalent of Soils
ASTM D 4380 : 2012 Standard Test Method for Density of Bentonitic Slurries
ASTM D 8151 : 2019 Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing
ASTM D 7560 : 2016 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
ASTM D 4506 : 2013 : EDT 1 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
ASTM D 2976 : 2015 Standard Test Method for pH of Peat Materials
ASTM D 6391 : 2011 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
ASTM D 5785/D5785M : 2015 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
ASTM D 7383 : 2019 Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations
ASTM D 7243 : 2011 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
ASTM D 7458 : 2014 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
ASTM D 7760 : 2018 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
ASTM D 4253 : 2016 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
ASTM D 5878 : 2019 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
ASTM D 3213 : 2019 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
ASTM D 2487 : 2017 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D 6725/D6725M : 2016 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
ASTM D 5786 : 2017 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
ASTM D 6519 : 2015 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D 4696 : 2018 Standard Guide for Pore-Liquid Sampling from the Vadose Zone
ASTM D 6432 : 2011 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
ASTM D 8106 : 2017 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
ASTM D 7300 : 2018 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
ASTM D 558 : 2011 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
ASTM D 7242/D7242M : 2006 : R2013 : EDT 1 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022)
ASTM D 5030/D5030M : 2013 : REV A Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
ASTM D 6572 : 2013 : EDT 2 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
ASTM D 3282 : 2015 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D 4630 : 2019 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
ASTM D 4829 : 2011 Standard Test Method for Expansion Index of Soils
ASTM D 3967 : 2016 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
ASTM D 7380 : 2015 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM D 7648/D7648M : 2018 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
ASTM D 5472/D5472M : 2014 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
ASTM D 4223/D4223M : 2012 Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
ASTM D 8121/D8121M : 2019 Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device
ASTM D 4767 : 2011 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D 4832 : 2016 : EDT 1 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D 6528 : 2017 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
ASTM D 6276 : 2019 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
ASTM D 6066 : 2011 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Withdrawn 2020)
ASTM D 4395 : 2017 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
ASTM D 6467 : 2013 : EDT 1 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
ASTM D 6029 : 2017 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D 7764 : 2012 Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers
ASTM D 4186/D4186M : 2012 : EDT 1 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
ASTM D 4535 : 2013 : EDT 2 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
ASTM D 5982 : 2015 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method) (Withdrawn 2024)
ASTM D 5920 : 2014 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM D 1140 : 2017 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
ASTM D 6517 : 2018 Standard Guide for Field Preservation of Ground Water Samples
ASTM D 6282/D6282M : 2014 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023)
ASTM D 3155 : 2011 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures (Withdrawn 2020)
ASTM D 7128 : 2018 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
ASTM D 2216 : 2019 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
ASTM D 4971 : 2016 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
ASTM D 5873 : 2014 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023)
ASTM D 8232 : 2018 Standard Test Procedures for Measuring the Inclination of Deep Foundations
ASTM D 4943 : 2018 Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
ASTM D 559/D559M : 2015 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
ASTM D 5779/D5779M : 2014 Standard Test Method for Field Determination of Rapid Specific Gravity of Rock and Manmade Materials for Erosion Control (Withdrawn 2023)
ASTM D 4553 : 2018 Standard Test Method for Determining In Situ Creep Characteristics of Rock
ASTM D 8249 : 2019 Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
ASTM D 6910/D6910M : 2019 Standard Test Method for Marsh Funnel Viscosity of Construction Slurries
ASTM D 1634 : 2017 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D 4050 : 2014 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
ASTM D 7262 : 2010 : R2016 : EDT 1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
ASTM D 5334 : 2014 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM D 4544 : 2019 Standard Practice for Estimating Peat Deposit Thickness
ASTM D 7012 : 2014 : EDT 1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
ASTM D 6393 : 2014 Standard Test Method for Bulk Solids Characterization by Carr Indices
ASTM D 4525 : 2013 : EDT 2 Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022)
ASTM D 5311/D5311M : 2013 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil (Withdrawn 2022)
ASTM D 5519 : 2015 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024)
ASTM D 5270 : 1996 : R2014 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM D 4394 : 2017 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
ASTM D 5299/D5299M : 2018 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
ASTM D 7758 : 2017 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
ASTM D 4106 : 2015 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM D 4647/D4647M : 2013 Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
ASTM D 6459 : 2015 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM D 4318 : 2017 : EDT 1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D 4105/D4105M : 2015 : EDT 1 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM D 4944 : 2018 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM D 4542 : 2015 Standard Test Methods for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
ASTM D 3999/D3999M : 2011 : EDT 1 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020)
ASTM D 6634/D6634M : 2014 Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells (Withdrawn 2023)
ASTM D 6475 : 2017 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
ASTM D 6243/D6243M : 2016 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
ASTM D 2944 : 2014 Standard Practice of Sampling Processed Peat Materials
ASTM D 7100 : 2011 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
ASTM D 4015 : 2015 : EDT 1 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
ASTM D 7698 : 2011 : REV A Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
ASTM D 5473/D5473M : 2015 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
ASTM D 4554 : 2012 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities (Withdrawn 2021)
ASTM D 5321/D5321M : 2019 Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.