• There are no items in your cart

ASTM D 5516 : 2018

Current
Current

The latest, up-to-date edition.

Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-01-2018

1.1This test method is designed to determine the effect of exposure to high temperatures and humidities on the flexure properties of fire-retardant treated softwood plywood.

1.1This test method is designed to determine the effect of exposure to high temperatures and humidities on the flexure properties of fire-retardant treated softwood plywood. In this test method, plywood is exposed to a temperature of 77°C (170°F).

1.2The purpose of the test method is to compare the flexural properties of fire-retardant treated plywood relative to untreated plywood. The results of tests conducted in accordance with this test method provide a reference point for estimating strength temperature relationships. This test method is intended to provide an accelerated test at elevated temperatures and controlled humidities of plywood sheathing treated with the same chemical formulation(s) and processing conditions as plywood used commercially.

1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 07
DocumentType
Test Method
Pages
7
ProductNote
THIS STANDARD ALSO REFERS TO ASTM E 176, AWPAC-27
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 5664 : 2017 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
ASTM D 7857 : 2016 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
ASTM D 6305 : 2008 : R2015 : EDT 1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
NFPA 703:2024 Standard for Fire-Retardant-Treated Wood and Fire-Retardant Coatings for Building Materials

ASTM D 1165 : 1980 : R1994 : EDT 1 Standard Nonmenclature of Domestic Hardwoods and Softwoods (Withdrawn 2002)
ASTM D 1165 : 2007 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM D 9 : 2020 Standard Terminology Relating to Wood and Wood-Based Products
ASTM D 6305 : 2008 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM E 84 : 2023 : REV D Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 4933 : 2016 Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
ASTM D 4933 : 1999 : R2010 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM E 84 : 2023 : REV C Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 2768 : 2011 : R2018 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
ASTM D 2915 : 2017 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 6305 : 2008 : R2015 : EDT 1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM D 6305 : 1998 : EDT 1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM E 176 : 2021 : REV A : EDT 1 Standard Terminology of Fire Standards
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 176 : 2018 : REV A : EDT 1 Standard Terminology of Fire Standards
ASTM D 4933 : 1999 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 4933 : 1999 : R2004 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
ASTM E 176 : 2024 Standard Terminology of Fire Standards
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 3043 : 2017 Standard Test Methods for Structural Panels in Flexure
ASTM D 3043 : 2000 Standard Test Methods for Testing Structural Panels in Flexure
ASTM D 1165 : 2018 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM D 6305 : 2002 : EDT 1 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM D 3043 : 2000 : EDT 1 Standard Test Methods for Testing Structural Panels in Flexure
ASTM D 6305 : 2021 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM D 1165 : 2023 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM E 84 : 2020 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 176 : 2021 Standard Terminology of Fire Standards
ASTM D 2915 : 2003 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D 4933 : 2016 : R2021 Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials
ASTM D 2915 : 2017 : R2022 Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM E 176 : 2018 : REV A : EDT 2 Standard Terminology of Fire Standards
ASTM E 84 : 2023 : REV B Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 6305 : 2002 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM D 1165 : 2003 Standard Nonmenclature of Domestic Hardwoods and Softwoods
ASTM D 3043 : 1987 : R1993 : EDT 1 Standard Methods of Testing Structural Panels in Flexure
ASTM D 1165 : 2013 Standard Nomenclature of Commercial Hardwoods and Softwoods
ASTM E 2768 : 2011 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 2915 : 2010 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
ASTM D 2915 : 1998 : EDT 1 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM E 176 : 2021 : REV A Standard Terminology of Fire Standards
ASTM D 2915 : 2002 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.