• There are no items in your cart

ASTM D 5681 : 2018

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Terminology for Waste and Waste Management

Available format(s)

Hardcopy , PDF

Superseded date

02-01-2020

Language(s)

English

Published date

11-01-2018

This terminology contains standard definitions of terms used in the general area of waste and waste management.

Committee
D 34
DocumentType
Reference Material
Pages
18
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This terminology contains standard definitions of terms used in the general area of waste and waste management. It is intended to promote understanding by providing precise technical definitions of terms used in the standards developed by Committee D34 and its subcommittees.

1.2Terms used only within an individual standard, and having a meaning unique to that standard, may be defined or explained in the terminology section of that individual standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 7858 : 2013 : R2018 Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 6323 : 2019 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
ASTM D 5058 : 2012 : R2020 Standard Practices for Compatibility of Screening Analysis of Waste
ASTM D 8018 : 2015 : R2020 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 5283 : 2018 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
ASTM D 6956 : 2017 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D 8155 : 2017 Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
ASTM D 6346 : 2017 Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D 8187 : 2018 Standard Guide for Interpretation of Standard Humidity Cell Test Results
ASTM D 6009 : 2012 Standard Guide for Sampling Waste Piles
ASTM D 4844 : 2016 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
ASTM D 5658 : 2013 Standard Practice for Sampling Unconsolidated Waste From Trucks
ASTM E 777 : 2017 : REV A Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D 8064 : 2016 Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024)
ASTM E 791 : 2008 : R2016 Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM D 8018 : 2015 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 6661 : 2017 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D 7353 : 2007 : R2013 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
ASTM D 3987 : 2012 Standard Practice for Shake Extraction of Solid Waste with Water
ASTM D 5759 : 2012 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM D 4981 : 2019 Standard Practice for Screening of Oxidizers in Waste
ASTM D 4979 : 2019 Standard Practice for Physical Description Screening Analysis in Waste
ASTM E 953/E953M : 2016 Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM D 6009 : 2019 Standard Guide for Sampling Waste Piles
ASTM D 5232 : 2019 Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D 6538 : 2012 : R2019 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 7831 : 2013 Standard Practice for Sampling of Tanks by Field Personnel
ASTM E 778 : 2015 Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
ASTM D 5057 : 2017 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D 5232 : 2013 Standard Test Method for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D 6759 : 2016 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D 7204 : 2015 Standard Practice for Sampling Waste Streams on Conveyors
ASTM D 6699 : 2016 Standard Practice for Sampling Liquids Using Bailers
ASTM D 6538 : 2012 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM E 790 : 2015 Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples
ASTM D 5058 : 2012 Standard Practices for Compatibility of Screening Analysis of Waste
ASTM D 6907 : 2005 : R2016 Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
ASTM D 7203 : 2011 : R2017 Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor (Withdrawn 2022)
ASTM E 1109 : 2019 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D 4547 : 2015 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 6700 : 2019 Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
ASTM E 775 : 2015 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM D 5831 : 2017 Standard Practice for Screening Fuels in Soils
ASTM D 6270 : 2017 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 4646 : 2016 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM E 1266 : 2012 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM D 5792 : 2010 : R2015 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D 5198 : 2017 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM E 829 : 2016 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis

ASTM E 1528 : 2006 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
ASTM D 6063 : 2011 : R2018 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM E 1138 : 1989 Terminology of Technical Aspects of Products Liability Litigation (Withdrawn 1995)
ASTM D 6982 : 2009 : R2016 Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
ASTM D 4646 : 2003 : R2008 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 5956 : 1996 : R2006 Standard Guide for Sampling Strategies for Heterogeneous Wastes (Withdrawn 2015)
ASTM D 4439 : 2020 Standard Terminology for Geosynthetics
ASTM D 6051 : 1996 : R2006 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities (Withdrawn 2015)
ASTM D 5679 : 1995 : REV A : R2006 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D 5744 : 2007 : EDT 1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 4448 : 2001 : R2019 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 4439 : 2015 Standard Terminology for Geosynthetics
ASTM D 5745 : 1995 : R1999 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D 5369 : 1993 : R2008 : EDT 1 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction (Withdrawn 2016)
ASTM D 5679 : 1995 : REV A Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D 5285 : 1992 : R1997 Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments
ASTM E 1528 : 2014 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
ASTM D 6842 : 2002 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D 6700 : 2001 : R2013 Standard Practice for Use of Scrap Tire-Derived Fuel
ASTM D 1129 : 2003 Standard Terminology Relating to Water
ASTM D 5746 : 1998 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
ASTM D 5744 : 2013 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 6700 : 2001 : R2006 Standard Practice for Use of Scrap Tire-Derived Fuel
ASTM D 6270 : 2017 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 5368 : 1993 : R2006 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D 4547 : 2009 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 6063 : 1996 : R2006 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM D 1129 : 2013 Standard Terminology Relating to Water
ASTM D 6982 : 2009 Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
ASTM D 6346 : 1998 Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D 6982 : 2003 Standard Practice for Detecting Hot Spots and Buried Objects Using Point-Net (Grid) Search Patterns
ASTM D 6346 : 1998 : R2004 Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D 4448 : 1985 : REV A : R1992 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 6538 : 2010 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 5231 : 1992 : R2008 Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D 6661 : 2001 : R2006 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D 6323 : 2012 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
ASTM D 4448 : 2001 : R2013 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 5120 : 1990 : R1995 : EDT 1 Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
ASTM D 4646 : 1987 : R1993 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 6008 : 1996 Standard Practice for Conducting Environmental Baseline Surveys
ASTM D 5231 : 1992 : R1998 Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D 6044 : 1996 : R2009 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D 5660 : 1996 : R2004 Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium
ASTM D 4790 : 2007 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D 6044 : 1996 : R2003 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D 5745 : 2015 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D 4448 : 2001 : R2007 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D 1129 : 2006 Standard Terminology Relating to Water
ASTM D 6759 : 2002 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D 6044 : 1996 : R2015 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D 6759 : 2016 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D 6538 : 2012 : R2019 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 6063 : 2011 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM D 6250 : 1998 : R2009 Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions (Withdrawn 2018)
ASTM D 5744 : 1996 Standard Test Method for Accelerated Weathering of Solid Materials Using a Modified Humidity Cell
ASTM D 5369 : 1993 : R1998 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
ASTM D 5792 : 2002 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D 5743 : 1997 : R2003 Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
ASTM D 4439 : 2011 Standard Terminology for Geosynthetics
ASTM D 5120 : 1990 : R2009 Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process (Withdrawn 2014)
ASTM D 4646 : 2003 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 5744 : 2012 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 4874 : 1995 : R2001 Standard Test Method for Leaching Solid Material in a Column Apparatus
ASTM D 5468 : 2002 : R2007 Standard Test Method for Gross Calorific and Ash Value of Waste Materials (Withdrawn 2016)
ASTM D 4439 : 2015 : REV A Standard Terminology for Geosynthetics
ASTM D 4547 : 2015 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 6270 : 1998 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 5285 : 2003 Standard Test Method for 24-Hour Batch-Type Measurement of Volatile Organic Sorption by Soils and Sediments (Withdrawn 2008)
ASTM E 1528 : 2000 Standard Practice for Environmental Site Assessments: Transaction Screen Process
ASTM D 6842 : 2002 : R2007 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making (Withdrawn 2015)
ASTM D 6270 : 2008 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 4547 : 1998 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM E 1248 : 1990 : R2004 Standard Practice for Shredder Explosion Protection
ASTM D 5468 : 1995 Standard Test Method for Gross Calorific and Ash Value of Waste Materials
ASTM D 6051 : 1996 : R2001 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D 6311 : 1998 : R2014 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D 5369 : 1993 : R2003 Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction
ASTM D 5792 : 2010 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
ASTM D 4439 : 2002 Standard Terminology for Geosynthetics
ASTM E 1527 : 2005 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
ASTM E 1527 : 2013 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
ASTM D 6051 : 1996 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D 5679 : 2016 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D 6008 : 1996 : R2005 Standard Practice for Conducting Environmental Baseline Surveys
ASTM D 6661 : 2017 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM E 1266 : 1988 : R2005 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM D 5660 : 1996 Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium
ASTM D 5743 : 1997 : R2008 Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2002 Standard Terminology Relating to Water
ASTM D 5745 : 1995 : R2005 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D 5746 : 1998 : R2016 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
ASTM D 4790 : 1999 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D 5120 : 1990 : R2004 Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
ASTM D 6661 : 2010 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D 4439 : 2017 Standard Terminology for Geosynthetics
ASTM D 5680 : 1995 : REV A : R2001 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM D 5368 : 2013 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples (Withdrawn 2014)
ASTM D 6051 : 2015 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D 6538 : 2000 : R2005 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 6063 : 1996 : R2001 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM D 6323 : 2012 : EDT 1 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities (Withdrawn 2018)
ASTM D 5744 : 2013 : EDT 1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 5746 : 1998 : R2002 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
ASTM D 6311 : 1998 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D 5660 : 1996 : R2009 Standard Test Method for Assessing the Microbial Detoxification of Chemically Contaminated Water and Soil Using a Toxicity Test with a Luminescent Marine Bacterium (Withdrawn 2014)
ASTM D 5743 : 1997 Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
ASTM D 6956 : 2017 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D 5792 : 2010 : R2015 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D 6346 : 2017 Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D 5368 : 1993 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D 6582 : 2000 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D 6582 : 2000 : R2005 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling
ASTM D 6323 : 1998 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
ASTM D 6538 : 2012 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 1129 : 2004 Standard Terminology Relating to Water
ASTM D 6250 : 1998 : R2003 Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM D 4790 : 2011 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM E 1248 : 1990 : R1997 Standard Practice for Shredder Explosion Protection
ASTM D 6759 : 2007 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM E 1266 : 1988 : R1999 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM D 4439 : 2001 Standard Terminology for Geosynthetics
ASTM E 1527 : 2000 Standard Practice for Environmental Site Assessments: Phase 1 Environmental Site Assessment Process
ASTM D 4874 : 1995 : R2006 Standard Test Method for Leaching Solid Material in a Column Apparatus
ASTM D 5680 : 2010 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM D 4439 : 2014 Standard Terminology for Geosynthetics
ASTM D 5956 : 1996 : R2001 Standard Guide for Sampling Strategies for Heterogeneous Wastes
ASTM D 4790 : 2014 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D 5368 : 1993 : R2001 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
ASTM D 6956 : 2003 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D 5231 : 1992 : R2003 Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D 6842 : 2002 : EDT 1 Standard Guide for Designing Cost-Effective Sampling and Measurement Plans by Use of Estimated Uncertainty and Its Components in Waste Management Decision-Making
ASTM D 6250 : 1998 Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions
ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
ASTM D 5468 : 2002 Standard Test Method for Gross Calorific and Ash Value of Waste Materials
ASTM D 6700 : 2001 Standard Practice for Use of Scrap Tire-Derived Fuel
ASTM E 1248 : 1990 : R2017 Standard Practice for Shredder Explosion Protection
ASTM D 4439 : 2004 Standard Terminology for Geosynthetics
ASTM D 4547 : 2003 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 5231 : 1992 : R2016 Standard Test Method for Determination of the Composition of Unprocessed Municipal Solid Waste
ASTM D 6270 : 2008 : R2012 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 6582 : 2000 : R2005 : EDT 1 Standard Guide for Ranked Set Sampling: Efficient Estimation of a Mean Concentration in Environmental Sampling (Withdrawn 2012)
ASTM D 5743 : 1997 : R2013 Standard Practice for Sampling Single or Multilayered Liquids, With or Without Solids, in Drums or Similar Containers
ASTM D 6044 : 1996 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D 5745 : 2009 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D 6538 : 2000 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 4646 : 1987 : R2001 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 5746 : 1998 : R2010 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
ASTM D 6759 : 2009 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D 5759 : 1995 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM D 5680 : 2014 Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM D 5744 : 2007 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 4448 : 2001 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM E 1528 : 2014 : EDT 1 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
ASTM D 6700 : 2019 Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
ASTM D 4646 : 2016 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 1129 : 2010 Standard Terminology Relating to Water
ASTM D 6311 : 1998 : R2009 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D 5792 : 1995 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D 4439 : 2000 Standard Terminology for Geosynthetics
ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
ASTM D 1129 : 2001 Standard Terminology Relating to Water
ASTM D 5679 : 1995 : REV A : R2012 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers
ASTM D 6346 : 1998 : R2009 Standard Guide for Accepting, Segregating and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
ASTM D 6538 : 2000 : R2005 : EDT 1 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 5956 : 2015 Standard Guide for Sampling Strategies for Heterogeneous Wastes
ASTM D 4874 : 1995 : R2014 Standard Test Method for Leaching Solid Material in a Column Apparatus (Withdrawn 2021)
ASTM D 5744 : 2018 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D 6008 : 1996 : R2014 Standard Practice for Conducting Environmental Baseline Surveys
ASTM E 1248 : 1990 : R2009 Standard Practice for Shredder Explosion Protection
ASTM E 1266 : 2012 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM E 1528 : 1996 Standard Practice for Limited Environmental Due Diligence: Transaction Screen Process
ASTM D 5680 : 1995 : REV A Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers
ASTM D 5956 : 1996 Standard Guide for Sampling Strategies for Heterogeneous Wastes
ASTM D 4874 : 1995 Standard Test Method for Leaching Solid Material in a Column Apparatus
ASTM D 4439 : 2018 Standard Terminology for Geosynthetics
ASTM D 6311 : 1998 : R2003 Standard Guide for Generation of Environmental Data Related to Waste Management Activities: Selection and Optimization of Sampling Design
ASTM D 5759 : 2012 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM E 1527 : 1997 Standard Practice for Environmental Site Assessments: Phase 1 Environmental Site Assessment Process
ASTM D 6956 : 2011 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D 5792 : 2002 : R2006 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM D 4547 : 2006 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 6063 : 1996 : EDT 1 Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM D 6270 : 2008 : EDT 1 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 6661 : 2001 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D 5679 : 1995 : REV A : R2001 Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.