• There are no items in your cart

ASTM D 7713 : 2018

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)

Available format(s)

Hardcopy , PDF

Superseded date

11-18-2023

Language(s)

English

Published date

11-08-2018

This specification covers both commercial products, engine coolant grade ethylene glycol and propylene glycol, including virgin glycols and those derived from the recycling of vehicle engine coolants and industrial source glycols.

Committee
D 15
DocumentType
Standard
Pages
2
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification covers both commercial products, engine coolant grade ethylene glycol and propylene glycol, including virgin glycols and those derived from the recycling of vehicle engine coolants and industrial source glycols.

1.2Types EG-1 and PG-1 cover glycols with sufficiently low limits on components to allow a blended coolant to meet most OEM (Original Equipment Manufacturer) specifications. These types will probably be virgin materials, although redistillation could produce a sufficiently pure product. Types EG-2 and PG-2 cover glycol that will be suitable for many coolants. These types can be either redistilled or virgin.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D 1122 : 2016 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2012 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1123 : 1999 : R2009 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 5931 : 1996 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 1122 : 2016 : R2017 : EDT 1 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2017 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM E 1177 : 2020 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1122 : 2020 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 2005 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1122 : 2008 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1287 : 2011 : R2020 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM E 1177 : 2009 : R2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1287 : 1991 : R1997 : EDT 1 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1122 : 2022 Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 7736 : 2012 : R2018 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 3634 : 1999 : R2009 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1287 : 2009 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1122 : 1997 : REV A Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1177 : 1994 : R1998 : EDT 1 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM E 1177 : 2003 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM E 1177 : 2009 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1209 : 2000 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 4725 : 2011 Standard Terminology for Engine Coolants
ASTM D 1123 : 2022 : REV A Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM E 1177 : 2005 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 1122 : 2013 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 1123 : 1999 : R2003 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM E 394 : 2015 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D 1287 : 2011 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 3634 : 1999 : R2005 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 1123 : 2022 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 5931 : 1996 : R2002 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1613 : 1996 : R1999 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4725 : 1998 Standard Terminology for Engine Coolants
ASTM D 1177 : 1994 : R1998 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 1613 : 2003 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 5827 : 2009 : EDT 1 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 7736 : 2019 : REV A Standard Test Method for Determination of Acids and Glycol Esters in Glycols
ASTM D 6660 : 2001 : R2014 : EDT 1 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 6130 : 1997 : REV A : R2009 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1123 : 1999 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 6660 : 2001 : R2007 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 5827 : 2022 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E 1177 : 2003 : REV A Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 1123 : 1999 : R2015 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E 300 : 2003 : R2022 Standard Practice for Sampling Industrial Chemicals
ASTM D 3634 : 1999 : R2005 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 7736 : 2011 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 6660 : 2001 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM E 1177 : 2019 Standard Specification for Engine Coolant Grade Glycol
ASTM D 6130 : 2011 : R2018 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 4725 : 2006 Standard Terminology for Engine Coolants
ASTM D 1123 : 1959 : R1968 Standard Method Of Test For Water In Concentrated Engine Antifreezes By The Iodine Reagent Method
ASTM D 4725 : 2015 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 1209 : 2005 : EDT 1 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM E 1177 : 2014 Standard Specification for Engine Coolant Grade Glycol
ASTM D 3634 : 2021 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 6130 : 1997 : REV A : R2003 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1287 : 1991 : R2002 Standard Test Method for pH of Engine Coolants and Antirusts
ASTM D 1613 : 2002 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1613 : 2006 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 1613 : 2006 : R2012 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
ASTM D 1177 : 2016 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 5827 : 1995 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6660 : 2001 : R2019 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 4725 : 2004 Standard Terminology for Engine Coolants
ASTM D 3634 : 1999 : R2015 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM E 1177 : 1998 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM E 394 : 2000 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D 1613 : 2017 : R2023 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM E 300 : 2003 : R2017 Standard Practice for Sampling Industrial Chemicals
ASTM D 1209 : 2005 : R2011 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 6130 : 2011 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM E 394 : 2022 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
ASTM D 4725 : 2008 Standard Terminology for Engine Coolants
ASTM D 5931 : 1996 : R2007 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 5827 : 2009 : R2015 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 7736 : 2019 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM D 1122 : 1997 : REV A : R2002 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
ASTM D 4725 : 2008 : REV A Standard Terminology for Engine Coolants
ASTM D 1209 : 2005 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 1177 : 2022 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 5931 : 2013 : R2017 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 5827 : 2009 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
ASTM D 6660 : 2001 : R2023 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
ASTM D 1613 : 2017 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products
ASTM D 4725 : 2015 : R2023 Standard Terminology for Engine Coolants and Related Fluids
ASTM E 1177 : 2022 Standard Specification for Engine Coolant Grade Glycol
ASTM D 1177 : 2007 Standard Test Method for Freezing Point of Aqueous Engine Coolants
ASTM D 3634 : 1999 : EDT 1 Standard Test Method for Trace Chloride Ion in Engine Coolants
ASTM D 7736 : 2012 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
ASTM E 1177 : 2006 Standard Specification for Engine Coolant Grade Ethylene Glycol
ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
ASTM D 4725 : 2013 Standard Terminology for Engine Coolants and Related Fluids
ASTM D 5931 : 2013 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
ASTM D 6130 : 1997 : REV A Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
ASTM D 1209 : 2005 : R2019 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
ASTM E 1177 : 2023 Standard Specification for Engine Coolant Grade Glycol
ASTM D 5931 : 2020 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.