ASTM E 1131 : 2008 : R2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Compositional Analysis by Thermogravimetry
Hardcopy , PDF
06-09-2020
English
05-15-2014
CONTAINED IN VOL. 14.02, 2017 Gives a general technique incorporating thermogravimetry to determine the amount of highly volatile matter, medium volatile matter, combustible material, and ash content of compounds.
Committee |
E 37
|
DocumentType |
Test Method
|
Pages |
6
|
ProductNote |
Reconfirmed 2014
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This test method provides a general technique incorporating thermogravimetry to determine the amount of highly volatile matter, medium volatile matter, combustible material, and ash content of compounds. This test method will be useful in performing a compositional analysis in cases where agreed upon by interested parties.
1.2This test method is applicable to solids and liquids.
1.3The temperature range of test is typically room temperature to 1000°C. Composition between 1 and 100 weight % of individual components may be determined.
1.4This test method utilizes an inert and reactive gas environment.
1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.6 This standard is related ISO 11358 but is more detailed and specific.
1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E 2043 : 1999 : R2017 | Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry |
ASTM D 6382/D6382M : 1999 : R2017 | Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material |
ASTM D 1248 : 2016 | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
ASTM D 8125 : 2018 | Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE) |
ASTM E 2105 : 2000 : R2016 | Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR) |
ASTM D 8268 : 2019 | Standard Practice for Rubber Compounding Materials—Evaluation of Recycled Vulcanizate Particulate Rubber |
ASTM D 6546 : 2015 | Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
ASTM F 2489 : 2006 : R2013 | Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases |
ASTM D 5603 : 2019 : REV A | Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Rubber |
ASTM F 2883 : 2011 | Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020) |
ASTM E 1582 : 2017 | Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers |
ASTM D 3172 : 1989 : R2002 | Standard Practice for Proximate Analysis of Coal and Coke |
ASTM E 1142 : 2011 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2012 | Standard Terminology Relating to Thermophysical Properties |
ASTM D 3172 : 2013 | Standard Practice for Proximate Analysis of Coal and Coke |
ASTM E 1142 : 1997 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2040 : 2008 | Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers |
ASTM D 3172 : 2007 | Standard Practice for Proximate Analysis of Coal and Coke |
ASTM E 1142 : 2013 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2004 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1582 : 2014 | Standard Practice for Calibration of Temperature Scale for Thermogravimetry |
ASTM E 1142 : 2006 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 2040 : 2003 | Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers |
ASTM D 3172 : 2007 : REV A | Standard Practice for Proximate Analysis of Coal and Coke |
ASTM D 3172 : 2013 : REDLINE | Standard Practice for Proximate Analysis of Coal and Coke |
ASTM E 1142 : 2007 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2015 : REDLINE | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1582 : 2000 | Standard Practice for Calibration of Temperature Scale for Thermogravimetry |
ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
ASTM E 1142 : 2014 : REV A | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1142 : 2014 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1582 : 2004 | Standard Practice for Calibration of Temperature Scale for Thermogravimetry |
ASTM E 1142 : 2005 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1582 : 2010 | Standard Practice for Calibration of Temperature Scale for Thermogravimetry |
ASTM E 1142 : 2015 | Standard Terminology Relating to Thermophysical Properties |
ASTM E 1582 : 1993 | Standard Practice for Calibration of Temperature Scale for Thermogravimetry |
ASTM E 1582 : 2017 : REDLINE | Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers |
ASTM E 2040 : 2008 : R2014 | Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers |
ASTM E 473 : 2016-05 | TERMINOLOGY RELATING TO THERMAL ANALYSIS AND RHEOLOGY |
ASTM E 2040 : 1999 | Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers |
ASTM E 1142 : 2011 : REV B | Standard Terminology Relating to Thermophysical Properties |
ASTM D 3172 : 1989 : R1997 | Standard Practice for Proximate Analysis of Coal and Coke |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.